[TUTORIAL] -Simple way to switch from one 2.1 version to another - XPERIA X10 General

Hi all,
I've just finished proving that this works on my own phone and wanted to share..
I started with UK Generic 1.6 firmware.. and tricked my phone into thinking it was Nordic to get the Nordic Combined 2.1 upgrade (following "1 click rooting")..
Then I thought to myself.. sh!t.. how do I get 2.1 Generic UK when that comes out..!!!..
Done some reading and thanks to thanss (!) I've just done the following and confirmed that I now have World Generic 2.1
I used "Super1click" root method to root my 2.1 (you need 32 bit java from what I've read) and switched the USB debugging off and on a few times during the process.. and it worked. (I used 1.5.3 shortfuse and have attached the zip file now below)
Then using root explorer I edited "build.prop" from within the system folder.
I changed
ro.semc.version.cust=xxxx-xxxx
and
ro.product.name=X10_xxxx-xxxx
I changed the xxxx-xxxx to 1232-9897 (World generic)
saved the settings and exited from the file.
I also changed the ro.semc.version.cust=xxxx-xxxx file in...
/etc/customization/settings/cust.prop
saved and exited.
Then I switched the phone off and on again..
Then off one more time..
Then I used SEUS...
It will say that you have the latest software (because you do!).. but if you do a repair then it will replace your current one with the one associated with the codes you entered...
and bingo.. job done..
CODES here..http://forum.xda-developers.com/showthread.php?t=826875
Make sure you use the first of the codes for your brand/region.
Obviously this only works with firmware that has been released into SEUS.
UPDATE - IF SWITCHING BACK TO A REGION THAT YOU WERE PREVIOUSLY ON YOU WILL NEED TO DO THIS...
(Courtesy of ARKEDK's 1.6-2.1 method!)
Clear out your db folder in either PC Companion or SEUS, which ever one you use.
Press your Windows Key+R or type "run" in your start menu.
Then insert the path to what ever program you use and press enter.
Then delete the folder named with numbers in it.
SEUS db folder can be found here:
Code:
%programfiles%\Sony Ericsson\Update Service\db\
PC Companion db folder can be found here:
Code:
%programdata%\Sony Ericsson\Update Engine\db\
Reboot your phone and use SEUS to re-install your phone to 2.1.
Upgrading from 1.6 to 2.1 - this method was the one I used.. http://forum.xda-developers.com/showthread.php?t=824711

im_iceman said:
Done some reading and thanks to thanss (!) I've just done the following and confirmed that I now have World Generic 2.1
Click to expand...
Click to collapse
Or you could just run x10 Flash 2.1 Final + Global World Firmware 2.1. But at least you have shown you can just change the codes in the build.prop so you can get your regions FW. Cheers.

You could.. but this method is repeatable for any available 2.1 firmware.

im_iceman said:
You could.. but this method is repeatable for any available 2.1 firmware.
Click to expand...
Click to collapse
Yeah, just edited my post as you posted that.

Hmm now I know I will definately be able to get uk version of 2.1 when its released this is very tempting to try....
Hmmm
I wouldn't be so bad if we just had dates set in place or just a rough estimate. The lack of no news from them is giving me itchy fingers and annoyed.
How much time do they need, I mean no of us are getting any younger lol!!!!
Thanks for all your work btw guys your are truely legendary
Sent from my X10i using XDA App

im_iceman said:
Hi all,
I've just finished proving that this works on my own phone and wanted to share..
I started with UK Generic 1.6 firmware.. and tricked my phone into thinking it was Nordic to get the Nordic Combined 2.1 upgrade (following "1 click rooting")..
Then I thought to myself.. sh!t.. how do I get 2.1 Generic UK when that comes out..!!!..
Done some reading and thanks to thanss (!) I've just done the following and confirmed that I now have World Generic 2.1
I used "Super1click" root method to root my 2.1 (you need 32 bit java from what I've read) and switched the USB debugging off and on a few times during the process.. and it worked.
Then using root explorer I edited "build.prop" from within the system folder.
I changed
ro.semc.version.cust=xxxx-xxxx
and
ro.product.name=X10_xxxx-xxxx
I changed the xxxx-xxxx to 1235-9897 (World generic)
saved the settings and exited from the file.
I also changed the ro.semc.version.cust=xxxx-xxxx file in...
/etc/customization/settings/cust.prop
saved and exited.
Then I switched the phone off and on again..
Then off one more time..
Then I used SEUS...
It will say that you have the latest software (because you do!).. but if you do a repair then it will replace your current one with the one associated with the codes you entered...
and bingo.. job done..
CODES here..http://forum.xda-developers.com/showthread.php?t=826875
Obviously this only works with firmware that has been released into SEUS.
Click to expand...
Click to collapse
Although you have gone into much more detail, provided links etc this sounds very similar to what I suggested to su_007 on the 2nd of this month, page 810 of the 2.1 discussion / news thread.
I would post a link but I'm using xda on my phone, here's copied and pasted text;
****My best guess is ask someone with a different fw to nordic and get the numbers ( the same ones that you used to do the nordic method ) but for that country and try running a repair on seus or pc comp.
This is only a guess and accept no responcibity if it goes horribly wrong.
Sent from my X10i using XDA App****
Not trying to take any credit or the wind out your sail so to speak, just thought id note it.
Sent from my X10i using XDA App

steve.adams.x10 said:
Not trying to take any credit or the wind out your sail so to speak, just thought id note it.
Click to expand...
Click to collapse
Well at least no one one has to trawl through 810 pages now to find it. And now we know it does actually work thanks to iceman.

I tried your method, but SEUS keep saying that i have the lastest FW and there are no Install button, only Finish button appear.
PC Com say that cannot download software for my fone.
Im stucking

XperiaX10iUser said:
Well at least no one one has to trawl through 810 pages now to find it. And now we know it does actually work thanks to iceman.
Click to expand...
Click to collapse
Ah yes, how easy it is for usefull information to get all jubbled up with all the other crap.
I'm glad it works, congrats on proving it does iceman.
Sent from my X10i using XDA App

this is a much easier way I think ...
In theory it involves only two major steps
1. change the product code...ie the region via [ 1 root access]
2. connect to Sony Update service ...so simple....

im_iceman said:
Hi all,
I've just finished proving that this works on my own phone and wanted to share..
I started with UK Generic 1.6 firmware.. and tricked my phone into thinking it was Nordic to get the Nordic Combined 2.1 upgrade (following "1 click rooting")..
Then I thought to myself.. sh!t.. how do I get 2.1 Generic UK when that comes out..!!!..
Done some reading and thanks to thanss (!) I've just done the following and confirmed that I now have World Generic 2.1
I used "Super1click" root method to root my 2.1 (you need 32 bit java from what I've read) and switched the USB debugging off and on a few times during the process.. and it worked.
Then using root explorer I edited "build.prop" from within the system folder.
I changed
ro.semc.version.cust=xxxx-xxxx
and
ro.product.name=X10_xxxx-xxxx
I changed the xxxx-xxxx to 1235-9897 (World generic)
saved the settings and exited from the file.
I also changed the ro.semc.version.cust=xxxx-xxxx file in...
/etc/customization/settings/cust.prop
saved and exited.
Then I switched the phone off and on again..
Then off one more time..
Then I used SEUS...
It will say that you have the latest software (because you do!).. but if you do a repair then it will replace your current one with the one associated with the codes you entered...
and bingo.. job done..
Obviously this only works with firmware that has been released into SEUS.
Click to expand...
Click to collapse
Hi, I'm from Argentina and I have the firmware 1.6 which I would like to know
I have steps to follow in order to do this trick SEUS, which would
the numbers that I have to use? because the list does not understand anything haha
Sorry for my bad traduction, google translate sucks xD
thx!!
xD

So nice one but im woundering.......
is there a need to use the Global World Firmware?
What are the differences between die Nordic and the Global one?

great!!! good to know this work, now i can switch easily to dutch generic when it comes out. (without downgrading to 1.6)

Sometimes you might consider deleting the db folder in the SEUS install folder.

Olli80 said:
So nice one but im woundering.......
is there a need to use the Global World Firmware?
What are the differences between die Nordic and the Global one?
Click to expand...
Click to collapse
My thoughts exactly! What is the difference?

I don't seem to have
ro.semc.version.cust=xxxx-xxxx
and
ro.product.name=X10_xxxx-xxxx
in my build.prop file. my file reads as follows:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=R2BA026
ro.build.display.id=R2BA026
ro.build.version.incremental=1277951075
ro.build.version.sdk=4
ro.build.version.codename=REL
ro.build.version.release=1.6
ro.build.date=Thu Jul 1 11:24:52 JST 2010
ro.build.date.utc=1277951092
ro.build.type=user
ro.build.user=semc-android
ro.build.host=jptolnxbld004.corpusers.net
ro.build.tags=rel-keys
ro.product.board=es209ra
ro.product.cpu.abi=armeabi
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SonyEricssonX10i
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=X10-user 1.6 R2BA026 1277951075 rel-keys
# end build properties
# SEMC Specific define
ro.semc.product.device=RACHAEL
ro.semc.version.fs=1227-4607
ro.semc.version.fs_revision=R2BA026
ro.semc.version.fs_variant=GENERIC
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
ro.sf.lcd_density=240
use_csp_plmn=1
ro.qualcomm.proprietary_obex=1
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.sync=yes
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
any thoughts?

abo999 said:
I don't seem to have
ro.semc.version.cust=xxxx-xxxx
and
ro.product.name=X10_xxxx-xxxx
in my build.prop file. my file reads as follows:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=R2BA026
ro.build.display.id=R2BA026
ro.build.version.incremental=1277951075
ro.build.version.sdk=4
ro.build.version.codename=REL
ro.build.version.release=1.6
ro.build.date=Thu Jul 1 11:24:52 JST 2010
ro.build.date.utc=1277951092
ro.build.type=user
ro.build.user=semc-android
ro.build.host=jptolnxbld004.corpusers.net
ro.build.tags=rel-keys
ro.product.board=es209ra
ro.product.cpu.abi=armeabi
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SonyEricssonX10i
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=X10-user 1.6 R2BA026 1277951075 rel-keys
# end build properties
# SEMC Specific define
ro.semc.product.device=RACHAEL
ro.semc.version.fs=1227-4607
ro.semc.version.fs_revision=R2BA026
ro.semc.version.fs_variant=GENERIC
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
ro.sf.lcd_density=240
use_csp_plmn=1
ro.qualcomm.proprietary_obex=1
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.sync=yes
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
any thoughts?
Click to expand...
Click to collapse
this is OS 1.6 the instructions are for OS 2.1
in OS 1.6 you can do these changes in system/default.prop

oops! was looking for a way to switch my 1.6 to a region so I can download 2.1. I guess the way forward is to switch 1.6 to nordic, download nordic 2.1, switch to my desired region and download again?

Hi - Switching from 1.6 to 2.1 - http://forum.xda-developers.com/showthread.php?t=824711
You can use this method to switch to ANY published 2.1 firmware from 1.6..

Just checked the code (1235-9897) in the code list and couldn't find it... but I could find 1232-9897...
Which one is it?
Just checking!

Related

Android for HTC Touch / Elf

Hello,
I'm french, so please excuse-me for my eventually English mistakes.
I've seen that topic : http://forum.xda-developers.com/showthread.php?t=385129&page=10
But I don't see if there is a application for HTC Touch or HTC Elf in order to have the famous Android from Google. I've seen on the Internet that there was the application for HTC Vogue, but it doesn't work on our phones Touch / Elf. (white screen)
Is this application exist ? Or is it in developpement maybe ?
Thanks for your answers.
There aren't any applications. Android is an OS, like Windows Mobile. You can choose between WM and Android, but can't have both on your Elf.
Ok. Thanks. So how can I have Android on my HTC Touch ? I need to change my rom if I've understand. But where is it ?
Thanks.
there is no android rom for the elf. only for the elfin.
freaksey said:
there is no android rom for the elf. only for the elfin.
Click to expand...
Click to collapse
never heard about this one... just linwizard on elfin for now
ehh i'm sorry, it's not a rom yet, but you can boot it from wm
-> http://forum.xda-developers.com/showthread.php?t=382265
freaksey said:
ehh i'm sorry, it's not a rom yet, but you can boot it from wm
-> http://forum.xda-developers.com/showthread.php?t=382265
Click to expand...
Click to collapse
It's for Vogue, not Elf or Elfin.
Android??? Elfin??? GOOGLE!!!!
Can anyone confirm if the Android OS will be avalable for Elfin units please????
I don't think there will be any official version. Maybe some Elfin user will create it.
was anybody successful with running that on an elfin?!
Android on htc touch/elfin
this is the phone i am talking about
http://pdadb.net/index.php?m=specs&id=952
OK so i am trying to get all the info together first before i brick this phone so i am doing alot of tech research below is everything i could find for this device
if you have more info please add. and eventually it will all come together.....I hope
This is info i researched for the phone i will use it to make a default.txt
# TMOBILE mda TOUCH 256, ELF0300, HTC elfin 0300
# this is an over view of my devices settings and tech info.
#
# Storage on device is........ 173.79 mb
# storage card is.............. 964.50 mb
#
#DEVICE INFORMATION
# rom version.................. shadow_2.1 WWE
# rom date .................... 10/02/08
# Radio version................ 03.08.90
# Protocol version............ 4.1.13.52
# ExtROM version............ Touch-edition
#
# HARDWARE
# CPU........................... 32 bit texas instument OMAP_850
# CPU core................... ARM926EJ-S
# Instruction set............ ARMv5TEJ
# level1 cache .............. 16KiB D-Cache / 8KiB l-Cache
#
# phone controller............ TI TMS320C54x
# CPU CLOCK/Speed .......... 201 Mhz/ 201 000 000hz
# rom type .................. FLASH EEPROM
# RAM size..................... 128 mib
# FLASH ROM size ......... 256 mib
# DATA bus ................. 16 bits
# display resolution....... 240 X 320
# Display type ............. color transflective TFT, 65536 scales
# display diagonal......... 2.8 inches
# colors 65536
# microphone............ mono
# loudspeaker........... mono
# audio output ......... proprietary
# cellular networks..... GSM900, GSM1800, GSM1900
# cellular data links...... CSD,GPRS,EDGE
# call alert ................. 64 -chord melody
# vibrating alert......... supported
# speakerphone............ supported
# audio controller.......... AGC
# Bluetooth................ 2.0
#
#CONTROL PERIPHERALS
# positioning device......... touchscreen
# primary key board......... not supported
# directional pad............ 5-way
# scroll wheel................ not supported
#
#INTERFACES
# Expantion slot.............. microSD,microSDHC,Transflash,SDIO
# USB.......................... USB 1.1 client-12Mbit/s mini-USB
# wireless lan................... 802.11b, 802.11g 54Mbit/s
# infared ....................... not supported
#
# main camera................. 1.9 mp
# optical zoom............... 1x
# battery capacity............ 1100 mah
#
# IDENTITY
# model number.............. ELF0300
# Platform..................... Pocket pc
# IMEI ......................... 35678901099446301
ok that is all for now here is to hoping
freaksey said:
there is no android rom for the elf. only for the elfin.
Click to expand...
Click to collapse
I've got the elfin but I can't find the rom.
Thanks.
really interested in this.... The Htc Vogue (another processor) has achivied this, The Htc Niki too.. but they are not OMAP like elf or elfin...
I'm also very interested in this android "rom"
I read that some people was successful with the linuxboot on elfin.
Is there anyone who knows how to achieve it?
Martin2 said:
Hello,
I'm french, so please excuse-me for my eventually English mistakes.
I've seen that topic : http://forum.xda-developers.com/showthread.php?t=385129&page=10
But I don't see if there is a application for HTC Touch or HTC Elf in order to have the famous Android from Google. I've seen on the Internet that there was the application for HTC Vogue, but it doesn't work on our phones Touch / Elf. (white screen)
Is this application exist ? Or is it in developpement maybe ?
Thanks for your answers.
Click to expand...
Click to collapse
it won't run on the htc touch's CPU
THIS IS OUR ONLY CHANCE, buy that sucker somebody
http://www.engadget.com/2009/02/10/keepin-it-real-fake-part-clxxxii-hkc-touch-clone-sports-andro/
Ok, here's what I have found after a day of very disappointing reading:
There is a WM booting version of android for the vouge (which is a qualcomm processor)
That processor is also the same (similar) architecture as the one in the dream/g1. Which is why it works I assume. As a result the rom should also work on the titan, diamond, HD, etc.
As for the Elf and Elfin. They use the TI OMAP 850 board. Google did write a version of android that worked on that board for a tech show, but it has not appeared anywhere around in a usable form for a phone. (No USB or keyboard or anything)
IMO someone should just have to take the kernal from that example and the development for the vouge and run with it
But that is probably way harder than it sounds (and hasn't happened yet as far as I can tell)
Also, the severe limitations of the Elf's ram will mean it probably not work booting from WM (since it needs 32mb at a BARE not even usable minimum)
The Herald forums has been porting android to the Omap850. They're still early on in the development stages, but I would imagine that helping them out (for those of you who can actually program and make drivers) would set a layout to port it easily to the elf (since they have the same CPU and chipset.)
Please DO NOT GIVE UP. I want android on my Elf
Android ROM can resolve the problem of the Bricker HTC with CID locked ?
How ?
it's possible to install Adroid ROM from bootloader !! with SD card (FAT32) Now ?

[Q] Xperia x10 OS failure!

Hello people,
Im stuck with my Xperia x10.
I also rootet my xperia but after i removed the root from mogwai.
I did a Update via SEUS, and my phone wasn't able to boot. After the sony erricson logo.. i became each time.. this logo " exclamation mark " + a " black Handy"
I also called Sony ericsson, they told me there is nothing to do..
Hmm somebody is there who could help me.. my xperia is just 1 month years old..
Is there a possibility to format my handy and install complety the Android OS?
Thanks people i will appreciated for good solutions
Greetings Lilpimpie
Did you update your phone with SEUS or it failed??? Tried PC Companion?
lilpimpie said:
my xperia is just 1 month years old..
Click to expand...
Click to collapse
Your Xperia is just one month...years old? lol
Maybe messing with your phone OS was a bit above your skill level, considering you have difficulties with basic grammar.
I wish people on this site would learn to speak properly.
I'm guessing english is not his native language, theres no need to be rude.
If you cant help dont post.
gunstar3035 said:
Your Xperia is just one month...years old? lol
Maybe messing with your phone OS was a bit above your skill level, considering you have difficulties with basic grammar.
I wish people on this site would learn to speak properly.
Click to expand...
Click to collapse
Calm down dude.
On the phone issue the OP is having, I can only suggest a reinstall using SEUS sorry buddy
Sent from my X10i using XDA App
Reinstalling from SEUS(not PC companion) should work just fine.
And no need to be rude. This is an forum in which people from different countries and with different languages post. At least his post was meaningful unlike yours.
OPs reference to a 'Handy' suggests his native language is German. His post, in English - a notoriously difficult language to master = is one hell of a sight better in vocabulary and grammar terms than I could muster in German............... Probably better than my French too - and I did do some of that at school!
As said, try reflashing on SEUS.
Gunstar. Just shut it
Sent from my X10i using XDA App
All you have to do is reinstall using SEUS again. If it doesn't work then use the old rooting method to install firmware without rooting.
lilpimpie said:
Hello people,
Im stuck with my Xperia x10.
I also rootet my xperia but after i removed the root from mogwai.
I did a Update via SEUS, and my phone wasn't able to boot. After the sony erricson logo.. i became each time.. this logo " exclamation mark " + a " black Handy"
I also called Sony ericsson, they told me there is nothing to do..
Hmm somebody is there who could help me.. my xperia is just 1 month years old..
Is there a possibility to format my handy and install complety the Android OS?
Thanks people i will appreciated for good solutions
Greetings Lilpimpie
Click to expand...
Click to collapse
I though you are cursing the OS based on title, but turn out you need help. lol.
Ok, you can try to use SEUS/PC Companion to fix the FW for you, but in some case, it won't work as SEUS will tell you that it doesn't recognize the phone.
The sure way to fix is by using the manual flashtools or using Omnius, you can go the Development section and check out the tools.
One time i also had this kind of problem, the exclamation mark during boot, SEUS can't work, but no worry. flashtools will work X10 is very hard to brick
solo13 said:
Gunstar. Just shut it
Sent from my X10i using XDA App
Click to expand...
Click to collapse
That is not even a proper sentence, indeed you have sure shown me.
Anyways, back to the topic on, I was simply suggesting that the OP should maybe look into hobbies that are a bit easier to grasp. I for one would not dig myself into a hole I knew nothing to get out of, but see? There I go with common sense again! I am such a horrid person for speaking truth everywhere I post.
Carry on phone pals
#
# Xperia X10 (ROOT) #
# #
# Android : 1.6 #
# Firmware: R2BA023 + MarketFix #
# Baseband: 1.1.27 #
# #
# #
# !! Bitte das X10 in den Flash Modus versetzen !! #
# !! ( Flashvorgang kann bis zu 5 mins dauern ) !! #
# #
Press any key to continue . . .
Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\Users\Lilpimpie\De
sktop\X10_R2BA023\step1\USBFlash.dll: Can't load IA 32-bit .dll on a AMD 64-bit
platform
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at X10flash.main(X10flash.java:385)
########################################################
# #
# Flashvorgang beendet, bitte USB Verbindung trennen #
# und das X10 mit Hilfe der Ein/Aus Taste neu starten! #
what does this error mean?
#
# Xperia X10 (ROOT) #
# #
# Android : 1.6 #
# Firmware: R2BA023 + MarketFix #
# Baseband: 1.1.27 #
# #
# #
# !! Bitte das X10 in den Flash Modus versetzen !! #
# !! ( Flashvorgang kann bis zu 5 mins dauern ) !! #
# #
Press any key to continue . . .
Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\Users\Lilpimpie\De
sktop\X10_R2BA023\step1\USBFlash.dll: Can't load IA 32-bit .dll on a AMD 64-bit
platform
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at X10flash.main(X10flash.java:385)
########################################################
# #
# Flashvorgang beendet, bitte USB Verbindung trennen #
# und das X10 mit Hilfe der Ein/Aus Taste neu starten! #
what does that mean?

[Q] Navitel licensce

I live from Ukraine and my English es very bed... so i use google translate. Do not judge strictly. (I use HTC HD2)
I have a rom TyphooN 3.4.0.
I have a navigation Navitel after flash lost license, that she would not have gone to correct the file build.prop, and then I stop working Auto-rotate Screen resolution. Of what? And how does this solve?
corrected line:
ro.product.name
ro.product.device
ro.product.board
ro.build.product
help please =( up!

[S+] 2.3.6 XWJW1 - 3 file - stock+ ROOT - 2 CSC variants

>>> DOWNLOAD <<<
- do a cache/data factory resets via cwm prior or after flashing
- full root via runme.bat from Full_ROOT with usb cable connected and "unknown sources" in settings/applicaation checked
- no CWM just basic root with required binnaries and superuser app
- baseband I9000XXJVT
CSC in this package: AUT, BSE, CNX, COA, COS, CPW, CRO, CYO, CYV, EUR, IRD, KOR, MET, MOZ, MSR, MTL, O2C, ONE, ORO, ORS, SEB, SIM, SMO, SUN, TMZ, TOP, TPH, TRA, TRG, TSR, TWO, VDH, VDI, VIM, VIP, VVT, XEH, XEO, XEZ, XFA, XFC, XFE, XFM
---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---
>>> DOWNLOAD <<<
- do a cache/data factory resets via cwm prior or after flashing
- full root via runme.bat from Full_ROOT with usb cable connected and "unknown sources" in settings/applicaation checked
- no CWM just basic root with required binnaries and superuser app
- baseband I9000XXJVT
- you need to manualy copy T9DB folder to /system/ in order to get T9 working with OXAJVT csc
and here it is -> http://www.multiupload.com/KGY1C1XP6C
CSC in this package: CPW, DBT, KOR, XEO, XEU
---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---==---
please do not mirror my files - ive uploaded them to hotfile for a reason
so i guess it works for everyone - cool
You rock man. Happy tripping
$omator said:
so i guess it works for everyone - cool
Click to expand...
Click to collapse
it does, we just need to wait for the fixed apk tool and then for the fresh stock+ package to get the ultimate combo hope they mend that tool quick.
Kal-El25 said:
it does, we just need to wait for the fixed apk tool and then for the fresh stock+ package to get the ultimate combo hope they mend that tool quick.
Click to expand...
Click to collapse
that is correct statement ;}
for now i can tell that this stock samsung firmware is best out of all they have released
how could I install CWM?
thx in advance for the tip
It's rooted so, same way as always, download rom manager from market and have it flashing CWM recovery for you
Thanks for this. I like your simple less-mod approach.
I have a problem with itunes .m4a tags on this and JVZ: they are messed up (no artist name or album art). On a fresh install. Flash back to JVR and they are fine..??
Anyone else? or a quick fix?
i am not sure if rom manager cwm will work -please report if it will and if possible post the exact process...
as for m4a tags. could you post one file that i could check it on ?
kaynpayn said:
It's rooted so, same way as always, download rom manager from market and have it flashing CWM recovery for you
Click to expand...
Click to collapse
this does not work for me.
the update.zip (generated by ROM Manager) has a signature verification issue...
next version if time will let us do it
should have basic extended cwm implemented
for now it is only root wo cwm ...
Here is a m4a file to try
http://www.mediafire.com/?kavy6a2k4p9ubaj
here is what is says
14:27:00.908 Debug MediaProvider 250 We skip .m4a files album-art thumbnail generation because of Apple's policy : /mnt/sdcard/01 Lonely Boy.m4a
Click to expand...
Click to collapse
am i correct saying that it was working aok in xxjvt? if yes i think i know how to fix it
Thanks for checking this out. Got no answer in JW1 thread...
Not sure about JVT but JVR works fine...
fixing it would require a reliable copy of apktool i guess
so we have to wait for one
i guess that is the way of smsung to prevent apple to sue them more
they are removing anything that could give apple ground for another court case
Thanks again, I guess I'll stay on JVR, for now....
I noticed the same with early 2.3.4, or was it 2.3.3... Anyway, I guess there have been many court actions since then.
i would convert files in some other supported format and use latest firmware as it is a god damn progress made since jvr mate
you can not win apple so easy, sammy took around path i think
why spend milions on useless process when you can just disable that service
google music got a option to import music files from itunes so the problem will be solved that way
Google Music Beta seems most clearly targeted as an "iTunes killer." When you install the Google Music Manager desktop app, it will automatically import your iTunes library into Google, including playlists, and you can keep it synced, which potentially means your iPod and your Android will play the same songs. It will not import iTunes music locked by DRM, so those songs are stuck as iPod only, unless you figure out a way to defeat Apple's DRM.
Click to expand...
Click to collapse
Google Music only in the US for now, i think?
Yeah, I guess I could convert...
While I had JW1 i liked it and it seemed zippy, you truly think it is a big leap forward? more so than most FW updates?
it is not a secret that you can activate it using us proxy and then use the service from outside us
then you can use cloud service to upload music and stream it to your phone
only downside is that you will be unable to purchase apps untill it will be activated outside us / in your country
yes JW1 is giant leap for mankind compared to JVT it is simply faster
also the 2.3.6 fixed standby mode with all sync for me (means no moar wierd battery usage on that)

Problem with Data connection in MIUI

Hello guys,
I've been using MIUI for a while. But recently I'm facing problems connecting to data services. I have used 2 different simcards from 2 different operators and I'm sure my connection settings are all right
I'm using cLK (But have tried MAGLDR too, didn't work), my HSPL is 2.08 and radio version is 2.15
I have tried MIUI 2.3.16, 2.3.23 and 2.4.6
I see the data icon on my phone but I can't connect to the internet...
What's the problem and what's the solution?!
Thank you
you could try to re-flash a different ROM other than MIUI & see if the phone is OK.
I'm using jaguar's MIUI Rom & all seems OK.
I used to have this problem on older builds, (newer roms seem to alleviate it) .
I used to fix it by setting my dns settings to google's open dns servers (8.8.8.8 & 8.8.4.4) (in wireless advanced settings & in build.prop)
Go to settings, about phone and then network. (not sure if this process is the same for your ROM)
What does your operator name, signal strenth & mobile network say?
mengfei said:
you could try to re-flash a different ROM other than MIUI & see if the phone is OK.
I'm using jaguar's MIUI Rom & all seems OK.
Click to expand...
Click to collapse
I tried typhoon's CM, no problem here...
Marvlesz said:
I used to have this problem on older builds, (newer roms seem to alleviate it) .
I used to fix it by setting my dns settings to google's open dns servers (8.8.8.8 & 8.8.4.4) (in wireless advanced settings & in build.prop)
Click to expand...
Click to collapse
Does this affect data? (GPRS)
htccraze said:
Go to settings, about phone and then network. (not sure if this process is the same for your ROM)
What does your operator name, signal strenth & mobile network say?
Click to expand...
Click to collapse
Everything seems fine here man
oxydiom said:
Does this affect data? (GPRS)
Click to expand...
Click to collapse
Well, in Wireless Settings I doubt it. But in build.prop, yes, it does.
Marvlesz said:
Well, in Wireless Settings I doubt it. But in build.prop, yes, it does.
Click to expand...
Click to collapse
It's build.prop is like this:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MIUI
ro.build.display.id=MIUIAndroid 2.4.6
ro.build.version.incremental=2.4.6
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Fri Apr 6 11:00:00 GMT 2011
ro.build.date.utc=1305889200
ro.build.type=userdebug
ro.build.user=builder
ro.build.host=xinyudt
ro.build.tags=release-keys
ro.product.model=HD2
ro.product.brand=htc_wwe
ro.product.name=libra_leo
ro.product.device=leo
ro.product.board=leo
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=qsd8k
windowsmgr.max_events_per_sec=60
ro.kernel.android.checkjni=0
# ro.build.product is obsolete; use ro.product.device
ro.build.product=leo
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=libra_leo-userdebug 2.3.7 MIUI 2.4.6 test-keys
ro.build.fingerprint=htc_wwe/libra_leo/leo:2.3.7/MIUI/2.4.6:userdebug/test-keys
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.ringtone=MI.ogg
ro.config.notification_sound=FadeIn.ogg
ro.config.alarm_alert=ClassicAlarm.ogg
ro.config.sms_received_sound=FadeIn.ogg
ro.config.sms_delivered_sound=MessageComplete.ogg
ro.sf.lcd_density=240
rild.libpath=/system/lib/libhtc_ril.so
ro.ril.ecc.HTC-ELL=92,93,94
ro.ril.ecc.HTC-WWE=999
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=1
ro.ril.gprsclass=12
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=5
ro.ril.hsxpa=2
wifi.interface=eth0
wifi.supplicant_scan_interval=60
ro.telephony.default_network=0
ro.ril.disable.power.collapse=1
ro.ril.def.agps.mode=2
ro.opengles.version=131072
ro.ril.avoid.pdp.overlap=1
ro.ril.enable.prl.recognition=0
dalvik.vm.heapsize=64m
dalvik.vm.dexopt-data-only=1
media.a1026.nsForVoiceRec=0
media.a1026.enableA1026=1
ro.modversion=MIUIAndroid-2.4.6-EN-LEO
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.setupwizard.mode=DISABLED
ro.com.android.dateformat=yyyy-MM-dd
ro.com.android.dataroaming=true
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,2.4.60,122,110,2.4.695
ro.ril.emc.mode=2
ro.moddevice=HD2
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.rommanager.developerid=miuiandroid
How can I input the DNS in here? What should I do?
Since you are using cLK, you should be fine with this (I don't know about MAGLDR) :
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
Just add the previous lines to your build.prop and make a restart. [YOU SHOULD MAKE A BACKUP FIRST ]
P.S : These are google's dns . Feel free to use your own favourite.
------------------------------------------------------------------------------------------------------------
Edit:
As to how to edit it, I think you are just lucky: http://www.xda-developers.com/android/edit-your-build-prop-the-easy-way-with-buildprop-editor/
I'm not sure if it works as I have never tried it before, but you can give it a shot .

Categories

Resources