My Samsung Vibrant won't mount to a Mac or PC. Yes USB debugging is turned on and mass storage is selected under USB settings. The samsung drivers are installed on the PC. I was on Bionix 1.9 but I just restored back to Bionix 1.7 to see if that would help but it didn't. When connected to a PC I get an error message saying the USB device is not recognized, please unplug and try again.
Does anyone have a solution?
Thanks
turn off usb debugging try that it always works for me then change usb settings to ask on connect hope that helps
Thanks but it didn't work.
ok on your computer when it say that i cannot connect to usb on the bottom left click that message and trouble shoot the usb ports
Yeah it says to unplug the device and then replug it in. If the error persists have the device replaced.
If I perform a factory data reset, will I lose my Nandroid backups via ROMmanager?
Swap the USB cable.
Related
I'm trying to connect my phone to my PC but I also get this USB Debugging Connected, I mount it but as i go to my computer nothing don't show up so I can continue the next step to get froyo 2.2 some one help me what should I do?
What worked for me (others report different) was to first connect to the PC with USB Debugging ON. The PC installed some device drivers. Unplug and turn USB debugging OFF, Ask on Connection ON, then reconnect. Then the three options, Kies, .... showed up and worked.
Hope that helped.
I'm gonna try
It's not installing nothing
Dude ****ing thank you man you are the best I am gonna remember this for now on incase thank you
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
katsumeiyo said:
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
Click to expand...
Click to collapse
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
...Awesome... said:
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
Click to expand...
Click to collapse
He has tried two cables, so I would tend to lean toward the port.
Sent from my HTC Glacier using XDA
i am in the same boat. looks like my charging port is bad. anyway to replace the charging port? i am not good with soldering
it's not ur usb port
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
tempuser2005 said:
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
Click to expand...
Click to collapse
What? He isn't trying to host the connection. He is trying to use his phone as a USB mass storage device.
Where did you get USB host from in his questions?
Sent from my HTC Glacier using XDA
Hi all,
I am having the same problem, except perhaps with a different cause. My user account on Windows 7 became corrupt and I can no longer log in, so I had to create a new one.
On the new account, my myTouch 4G is not recognized for mass storage/disk drive mode via USB. The USB cable does work, the port is okay, and I've used both with other devices. The myTouch shows as charging when connected to the computer. I have uninstalled and reinstalled all of the myTouch drivers, restarted computer and phone, to no avail.
When it is connected in USB, it shows as generic "Drive F" and is inaccessible. When I check properties it says mytouch4g. When I check "Devices" it is recognized as portable storage. I have tried with USB debugging on and off, and have set "connected to computer" mode to disk drive.
Any thoughts? I thought possibly loading the generic ADB driver again might help, but I cannot get to the stage where I can force it to load that driver instead of the HTC one.
Hi Basically plugged my S4 i9505 in via usb. Nothing shows in my computer, but phone remains charging. I have tried uninstalling and reinstalling all samsung usb drivers but it does nothing. Tried installing kies/older usb drivers, still no luck. Regardless of if there are drivers or not on my pc, there is no detection what so ever. My pc is detecting my second S4 I9505 perfectly. Anyone know the solution to this?
majorr92 said:
Hi Basically plugged my S4 i9505 in via usb. Nothing shows in my computer, but phone remains charging. I have tried uninstalling and reinstalling all samsung usb drivers but it does nothing. Tried installing kies/older usb drivers, still no luck. Regardless of if there are drivers or not on my pc, there is no detection what so ever. My pc is detecting my second S4 I9505 perfectly. Anyone know the solution to this?
Click to expand...
Click to collapse
Tap 5 times buildnumber in settings menu under: about phone to open developer settings. Enable USB debugging. Now you can choose what to do when phone is plugged in pc.
lekiaM said:
Tap 5 times buildnumber in settings menu under: about phone to open developer settings. Enable USB debugging. Now you can choose what to do when phone is plugged in pc.
Click to expand...
Click to collapse
USB debugging is Enable still nothing happen
USB debugging is not required in order to have the phone recognized by the computer.
Have you tried different USB cables and USB ports? Is the phone detected on other computers?
i had the same problem.... and we found out that the pins or the usb connection sh1t from the phone doesn`t make good contact. si try to push a little but or force up and down the usb cable to the usb from phone maybe you will manage to find a stable connection or something.
when i connect to phone to the pc i have to hold the usb cable connected to the phone in a weird position. that works for me
I connected my SM G530H to my PC, but my PC doesn't detect anything. It shows nothing about USB. But my phone keep charging unlees i unplug the USB cable. I turned on USB debugging on developer option but still same. Nothing happens
Im using stock rom. Could anyone help? I can't install twrp to odin if i can't fix this problem.
my nexus 6 will only charge no data transfer and pc wont recognize it. When i connect it to the pc it goes staright to charge mode and the usb trident symbol doesnt ever appear. In developer options usb configure is stuck in "charge mode" only. Ive tried different roms from pie to mm . i reinstalled bootloader and radio, tried twrp back ups and still the same. Had new charging port put in phone thinking that was the problem but didnt help. Ive searched google but couldnt find anything. Any Ideas, really appreciate it thx
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
kanpol said:
When I installed stock rom which was android 7.1 it changed phone back to encrypted. Now i have to format internal drive in order to install a pie rom. Does anyone think that formatting internal drive might fix problem with not being able to do anything but charge phone from usb port, because if that doesnt fix it there would be no way for me to put any rom on my internal drive to install it.. Does anyone have any suggestions
Click to expand...
Click to collapse
Just to double check that adb devices shows your serial #. If not, it may be a driver issue.
Computer doesn’t see it, when I enter adb devices it doesn’t show up. Nothing shows up in device manager either: Also when I enter fast boot on the phone “power lower volume button” it says “connect usb data cable” I’ve trued numerous cables that work fine on my other phone. So it’s not the cable. After I plug them into phone it still says connect usb data cable.
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
kanpol said:
I also have a thumb drive with a micro usb connecter that used to work on the phone. Now the phone doesn’t see it when you plug it in to the phone. But it works on my other phone so it’s not the thumb drive
Click to expand...
Click to collapse
It sounds like a driver problem. Is it a windows PC? Have you tried installing the Google USB driver? I've had similar issues, and reinstalling the driver(s) has worked for me.
It’s windows 10 and I reinstalled driver, other thing is in my car when I plug it in to the usb slot for android auto, it doesn’t show up in my car either and it used too.
It’s like the phone is stuck in charge only mode and I can’t get it out of that
kanpol said:
It’s like the phone is stuck in charge only mode and I can’t get it out of that
Click to expand...
Click to collapse
When you connect your other phone to your PC, does its serial # show up in adb devices? If so, I'm out of suggestions.
1 more thing.. Have you enabled USB debugging in Developer Options?
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
kanpol said:
Other phones shows up and in devolpers options in “usb configuration” you can set it to mtp but when you hit enter it goes back to charge only. I was on” aiop 14.0 rom” when it happened but it was working fine on that rom , then one day android auto kept saying connect usb, so when I got home I tried to plug it into pc and nothing. So I replaced charging port thinking that was problem but it didn’t help. Flashed other roms and even went back to stock, reflashed bootloader nothing helped. I was hoping someone here had seen this before cause I googled it and nothing like this could I find
Click to expand...
Click to collapse
Forget USB configuration for a minute. In developer options, under debugging, USB debugging needs to be enabled.
usb debugging is enable also. even tried turning it off and back on again, didnt help.
you know when you connect phone to pc and you normally see the usb trident symbol on your phone, well when i connect it to the pc i dont see that symbol it just goes straight to charging but even charging i should still see the usb symbol and i dont,