I was running Fusion 1.1 recently, and when the Core v1 kernel was released, I flashed the 1.2ghz version, but experienced freezes.
I figured my phone couldnt handle the OC, so I flashed the 1ghz version, my phone started freezing worse. I tried rebooting and it froze during the Galaxy S boot animation.
I then adb'd into recovery and tried flashing Fusion 1.1 again, but my phone froze during the flash and now it wont boot past the Vibrant screen. When plugged into the computer, it only boots up enough the show the battery charge screen, but freezes before it even displays a battery level.
ADB doesnt seem to recognize any connected devices.
Maybe Im getting the hardware button combos wrong, as far as I know, a device that wasnt previously hardware locked cant become locked, right? I know for a fact mine wasnt locked before.
If someone could post the exact hardware button combos, cause Ive seen conflicting posts on this. Or any help for that matter, Im desperate.
try turning the phone off, holding volume up and volume down, while holding those two plug the usb cable in.
see if that gets you into download mode.
rbirg said:
try turning the phone off, holding volume up and volume down, while holding those two plug the usb cable in.
see if that gets you into download mode.
Click to expand...
Click to collapse
Nope, just pops up the battery screen and freezes.
A question about hardware locked phones, the combo Im using to get into recovery is, hold down vol up + vol down + power, and when the Vibrant screen disappears, release the power button, but keep holding the volume buttons.
However when I do this, the Vibrant screen just pops up a second time, which wont happen unless Im holding the power button. If I am to take "hardware-locked" literally, then the power button wouldnt even do that, right?
thegreatcity said:
A question about hardware locked phones, the combo Im using to get into recovery is, hold down vol up + vol down + power, and when the Vibrant screen disappears, release the power button, but keep holding the volume buttons.
Click to expand...
Click to collapse
Hold Vol+/Vol- and Power. Release Power when first Vibrant screen comes up. Works for me..
fearmonkey said:
Hold Vol+/Vol- and Power. Release Power when first Vibrant screen comes up. Works for me..
Click to expand...
Click to collapse
I just get stuck on the Vibrant screen.
Unless your Vibrant is actually hardware locked, this method should get you into download mode. I have always entered download mode using this method.
1- Power off your phone.
2- Make sure you have the correct drivers installed on your PC for the phone. (I assume you do if you were using ADB).
3- Open Odin on your PC. (I recommend using Odin3 v1.3 or higher, v1.0 has issues)
4- Remove the battery from your Vibrant.
5- Plug the USB cable into your computer.
6- Plug the USB cable into your Vibrant.
7- With one hand (holding the Vibrant on it's side) hold down the Volume up, Volume down, and power buttons all at the same time.
8- While watching the screen, and holding all 3 buttons, place the battery back in the vibrant.
9- Once the battery has been inserted you will likely see one of two things, the "swirly" thinking icon (most common) or the battery icon will pop up. Keep holding the buttons until the initial icon disappears and you see a full black screen is shown.
10- As soon as you see that black screen, release ONLY the power button, continue to hold the volume keys and if done correctly, the Vibrant will go into download mode.
11- Verify Odin sees the device. There will be a box that turns yellow with a Com port shown
12- Load up the .pit & .tar files for the stock rom and flash away. (May have to use re-partition, not sure though)
Hope this helps/works! Good Luck!
Dragoth12 said:
Unless your Vibrant is actually hardware locked, this method should get you into download mode. I have always entered download mode using this method.
1- Power off your phone.
2- Make sure you have the correct drivers installed on your PC for the phone. (I assume you do if you were using ADB).
3- Open Odin on your PC. (I recommend using Odin3 v1.3 or higher, v1.0 has issues)
4- Remove the battery from your Vibrant.
5- Plug the USB cable into your computer.
6- Plug the USB cable into your Vibrant.
7- With one hand (holding the Vibrant on it's side) hold down the Volume up, Volume down, and power buttons all at the same time.
8- While watching the screen, and holding all 3 buttons, place the battery back in the vibrant.
9- Once the battery has been inserted you will likely see one of two things, the "swirly" thinking icon (most common) or the battery icon will pop up. Keep holding the buttons until the initial icon disappears and you see a full black screen is shown.
10- As soon as you see that black screen, release ONLY the power button, continue to hold the volume keys and if done correctly, the Vibrant will go into download mode.
11- Verify Odin sees the device. There will be a box that turns yellow with a Com port shown
12- Load up the .pit & .tar files for the stock rom and flash away. (May have to use re-partition, not sure though)
Hope this helps/works! Good Luck!
Click to expand...
Click to collapse
Followed the directions (used Odin 3 1.70), but when I release the power button at the black screen, the battery screen just comes back up again.
thegreatcity said:
Followed the directions (used Odin 3 1.70), but when I release the power button at the black screen, the battery screen just comes back up again.
Click to expand...
Click to collapse
You are 100% sure you aren't hardware locked? My wifes phone was hardware locked and I couldn't get her's into download mode with that method. If you are hardware locked you may have to make a jig to get up and running....i should have bookmarked that thread....now I have to search.
Sent from my SGH-T959 using Tapatalk
Dragoth12 said:
You are 100% sure you aren't hardware locked? My wifes phone was hardware locked and I couldn't get her's into download mode with that method. If you are hardware locked you may have to make a jig to get up and running....i should have bookmarked that thread....now I have to search.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
I havent had to use to the hardware keys in a while, so maybe I am.
I thought you couldnt use volume keys to navigate recovery if you were HW locked?
If it turns out I am locked, do you think Id be able to access download with this method?
http://forum.xda-developers.com/showthread.php?t=819551
thegreatcity said:
I havent had to use to the hardware keys in a while, so maybe I am.
I thought you couldnt use volume keys to navigate recovery if you were HW locked?
If it turns out I am locked, do you think Id be able to access download with this method?
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
That is the exact thread I went looking for. It should get you into download mode no problem. Worth a shot anyway.
Sent from my SGH-T959 using Tapatalk
This kernel nearly bricked me much like the problem you're experiencing. It does seem like you may be hardware locked...it locked me out of recovery with the use of 3 hardware buttons, but luckily Odin came through.
You do have the samsung drivers installed on your computer correct? This might be the reason why you can't get into download mode. I also noticed that even though I got into download mode it did not immediately show the COM notification showing I was connected...I hit start anyway and it immediately started flashing the other kernel I used to recover (JAC OC/UV 1.0). There is something seriously wrong with this kernel on certain Vibrants and I don't think I'll be flashing it again, even after updates.
Sdobron said:
There is something seriously wrong with this kernel on certain Vibrants and I don't think I'll be flashing it again, even after updates.
Click to expand...
Click to collapse
I would definitely have to agree with you there, it froze during a flash with me, which is anything but safe.
Either way, I went out and bought the correct resistors, but I've never done any soldering so I got the micro usb breakout board since its a little easier. I suppose that will come in a week and then Ill have to put it all together and see if the homemade jig works. Wish me luck!
Sdobron said:
This kernel nearly bricked me much like the problem you're experiencing. It does seem like you may be hardware locked...it locked me out of recovery with the use of 3 hardware buttons, but luckily Odin came through.
You do have the samsung drivers installed on your computer correct? This might be the reason why you can't get into download mode. I also noticed that even though I got into download mode it did not immediately show the COM notification showing I was connected...I hit start anyway and it immediately started flashing the other kernel I used to recover (JAC OC/UV 1.0). There is something seriously wrong with this kernel on certain Vibrants and I don't think I'll be flashing it again, even after updates.
Click to expand...
Click to collapse
Did your phone get hot? One must be careful when flashing oc kernel. It is quite possible to ruin your phone if the temperature gets out of control...
Sent from my SGH-T959 using XDA App
Good luck man. I too had Fusion 1.1, flashed Core 1.2 which caused freezes, I flashed back to stock and when attempting to reload Fusion I messed up the USB and it bricked, and I was hardware locked. I made the "Jig" and it worked fine after a couple tries plugging it in, got to download and flashed back to stock without any problems.
fearmonkey said:
Hold Vol+/Vol- and Power. Release Power when first Vibrant screen comes up. Works for me..
Click to expand...
Click to collapse
Strange, I release after the second Vibrant screen.
OP: it certainly sounds like you're hardware locked. And no, I don't think it means you can't navigate recovery, it means the buttons don't work when trying to get into recovery in the first place (I was hardware locked and couldn't enter recovery/download without adb; I used the flashable fix to remove the hardware lock).
Sent from my SGH-T959 using XDA App
dbacchus said:
Did your phone get hot? One must be careful when flashing oc kernel. It is quite possible to ruin your phone if the temperature gets out of control...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Used the 1 ghz kernel
Sent from my SGH-T959 using XDA App
this happened to me, 1.2 kernal was very unstable, flashed back to stock and bricked hardware locked vib....getting another one sent to me...
Related
Unable to turn it on. totally bricked
So... Are you unable to turn it on due to no fingers?
Lol yea what happened?
Well, we need a bit more info.
Sent from my SGH-T959 using XDA App
1. have you tried "power button" ?
2. have you charged the phone ?
on a bright side, you are the 1st one !
Maybe your battery is loose? Not to mention that bricking a
phone is usually due to screwing up a software flash. So, is brick really the right word?
Sent from my SGH-T959 using XDA App
kolyan said:
1. have you tried "power button" ?
2. have you charged the phone ?
on a bright side, you are the 1st one !
Click to expand...
Click to collapse
LOL!!
Try holding down the volume down button as you turn the phone on...see if that does anything.
Only time I'd allow the "First" comment to be used in a thread.
Im guessing CW Recovery...
Thank you guys
I think it's bricked, and unrecoverable.
After several flashing, It suddenly turned off then never woke up again. Any effort so far is hopeless
bl4ckdr4g00n said:
Thank you guys
I think it's bricked, and unrecoverable.
After several flashing, It suddenly turned off then never woke up again. Any effort so far is hopeless
Click to expand...
Click to collapse
What were you flashing? Give more info and maybe ppl would/could help you!
All~G1 said:
What were you flashing? Give more info and maybe ppl would/could help you!
Click to expand...
Click to collapse
I tried with captivate stock firmware, i9000 international firmware, then I flash back to vibrant stock firmware.
After had things done with Odin, my phone restarted, and it was the last time I saw my baby working as a smart phone.
Did you try to reboot the phone into recovery or download mode?
DAKIDD236 said:
Did you try to reboot the phone into recovery or download mode?
Click to expand...
Click to collapse
How can I do that when I can't even turn it on?
bl4ckdr4g00n said:
How can I do that when I can't even turn it on?
Click to expand...
Click to collapse
Have you tried plugging it into your charger? does the battery/charging screen come on?
bl4ckdr4g00n said:
How can I do that when I can't even turn it on?
Click to expand...
Click to collapse
try this Koush posted this in his thread.. hope it works
Koush said:
If you are stuck on the phone to PC screen, you are NOT bricked. During development, I ended up getting into this state a couple times myself. You can still get into download mode in the same fashion.
Connect your phone to USB so you get the phone->PC screen. Press and hold both volume up/down. Then press and also hold Home. Then start pressing and holding power for 2 seconds. After 2 seconds, let go of power. Continue holding volume up, volume down, and home, until you get into download mode.
Click to expand...
Click to collapse
All~G1 said:
Have you tried plugging it into your charger? does the battery/charging screen come on?
Click to expand...
Click to collapse
no, a completely blank screen.
no icon, no GUI, no nothing (
Yeah, weird...I just flashed back to US firmware and now my phone is totally unresponsive to everything. Keep in mind I've flashed back and forth several times...even once thought my phone was bricked because the power button wouldn't even turn the screen on. But after holding the correct buttons it finally booted into download mode. I was even using my phone earlier just fine, and having it run quadrant test of 1700, but as soon as I flashed back to 100% stock US firmware, my phone now no longer boots. Go figure lol.
Though this time I think it has bit the dust for real, lol. So be weary of flashing back to US firmware if you are flashing a lot of different other firmwares. Cuz I think something happens and the key combinations get deleted so it refuses to boot into any mode.
DAKIDD236 said:
try this Koush posted this in his thread.. hope it works
Click to expand...
Click to collapse
I"m at the phone to pc screen..but the Home button is not a "button" it's a touch sensitive button on my vibrant and it won't go into download mode...
I got here because i flashed the custom kernel to put the market and data on a ext4 partition...and it reversed my volume buttons and reversed the routing of sound..headphone speaker..that stuff....so i couldn't hear anything...so when i went to reflash stock t-mobile firmware it told me not to unplug for like hours..it wasn't doing anything.....i took the battery out and now i'm stuck at phone to pc...i think i might just use the warranty..seeing as u can't do a think with it...atleast i can't that is..i feel like a moron...
the forum said to work on com7 but com4 was showing up in odin...i couldn't get it to go on com7 so i thought it should still work....
fykick said:
even once thought my phone was bricked because the power button wouldn't even turn the screen on. But after holding the correct buttons it finally booted into download mode.
Click to expand...
Click to collapse
what was your combination?
I hold volume up and down..then hold home with those..then power for 2 seconds..let go and nothing...it doesn't recognize i'm holding the home because it's a software based button..the home key that is..and with no software...no button...so i'm afraid this screen means bricked...adb reboot download won't work either...i'm gunna get it exchanged in the morning..under buyers remorse..
help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.
Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.
i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons
I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!
did it work?
Hi. I have similar problem. Can anybody give instruction what can I do?
I have this problem too. Please help somebody
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me
i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will
No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse
AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...
on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?
I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..
did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)
I tried to update my firmware last night using odin (I've used it several times for my Galaxy S) and it failed, the error message was something along the lines of "write operation failed"
after waiting 25mins to see if my tab would reboot it didn't so I held down the power button to restart it and it switched off and now it won't switch on again ....
I've tried plugging it into all my usb slots, charging through the wall charger and tried using android commander but nothing makes the screen pop up with that little image of a computer and phone.
I can't even get into download mode, and odin doesn't pick it up. I think it's bricked for good,
I had a issue with the USB cable and had to get it replaced by samsung, now my ELF (Early-Life Failure) is up so I don't know what to do.....
Any Suggestions?
It's ok buddy its not bricked just plug in to the usb on the pc with odin3 on and leave at for a wile and it will come right back up.
Sent from my GT-P1000 using XDA App
I left it plugged in for about 10/15 mins and nothing happened after that I tired to to the whole power+volume down+home button to turn it off and back on, didn't work and just tried to ADB it and the device isn't found.
So I think its a costly paperweight atm
Ok well plug it in to the wall outlet and leave it for a few hours. I had tbe same prom you had and thats what work for me.
sent from SGH-T849
rattenzadel said:
I left it plugged in for about 10/15 mins and nothing happened after that I tired to to the whole power+volume down+home button to turn it off and back on, didn't work and just tried to ADB it and the device isn't found.
So I think its a costly paperweight atm
Click to expand...
Click to collapse
Im so sure of it that id buy your paper weight from you.
sent from SGH-T849
lol I liked my paperweight too much Ok I'll leave charged at home while I go to work for 7 hours, Thanks for your help bulldebeerman, Hopefully this fixes the ubertab (yes I nicknamed this paperweight!)
Ok so It's still bricked.... I forgot to mention the buttons don't work eg. I push and hold the power button and it does nothing. I charged it for the day so it should be 100% battery and now odin isn't finding it still. Also I didn't have USB debbuging enabled :/
Now I will admit I don't have a Tab(til next month) but wouldn't you un brick it the same way you do a Samsung Vibrant?
(Am not trying to be smart, just trying to find out everything I can before I buy it)...And on that note is there a 32GB version out?
rattenzadel said:
Ok so It's still bricked.... I forgot to mention the buttons don't work eg. I push and hold the power button and it does nothing. I charged it for the day so it should be 100% battery and now odin isn't finding it still. Also I didn't have USB debbuging enabled :/
Click to expand...
Click to collapse
Have you tried dropping the phone into Recovery Mode?
There is some confusion on what buttons to press where some say to press and hold the Volume Up AND Power Buttons simultaneously, whereas others mention pressing the above AND the Back Button.
If you can get into Recovery Mode you may be able to restart the phone.
If not and Revery Mode works try dropping the phone into Download Mode which is the same for RM but you press the Volume Down instead of Up.
With DM you will then be able to use third party software (Odin & a suitable ROM image from samfirmware'com) to bring the phone back up and running.
Yep tried all that tried
Power + Volume Up
Power + Volume Down
Power + Volume Up + Down
Power + Volume Down + Home
Power + Volume Domn + Up + Home
so um.... nothing makes the phone start
rattenzadel said:
Yep tried all that tried
Power + Volume Up
Power + Volume Down
Power + Volume Up + Down
Power + Volume Down + Home
Power + Volume Domn + Up + Home
so um.... nothing makes the phone start
Click to expand...
Click to collapse
You mentioned Home button but not the Back Button.
I take it that does not work either?
Sorry forgot to menton that ... tried all possible combos for that too .... and adb won't detect the tab which kinda really make me think its brick for good :/
Its not bricked.
Power it off, and power it back on holding the vol down button and the power button.
When you see the computer---!---phone icon, release the keys, and connect it to a pc with an open odin. It will get recognized ( even though you dont get the download mode, you are in it ).
After that, flash whatever you need.
Try that and let me know.
sedde said:
Its not bricked.
Power it off, and power it back on holding the vol down button and the power button.
When you see the computer---!---phone icon, release the keys, and connect it to a pc with an open odin. It will get recognized ( even though you dont get the download mode, you are in it ).
After that, flash whatever you need.
Try that and let me know.
Click to expand...
Click to collapse
I don't believe he is getting any power indications at all.... I've already mentioned pressing these keys.
Beards said:
I don't believe he is getting any power indications at all.... I've already mentioned pressing these keys.
Click to expand...
Click to collapse
Oh then it must be hardware fault. Return it and get a new one back.
yep no way of seeing if the tab is on or not . other than after the whole day of charging the tab gets hot on the back :/
rattenzadel said:
yep no way of seeing if the tab is on or not . other than after the whole day of charging the tab gets hot on the back :/
Click to expand...
Click to collapse
Where's your nearest Service Centre???
Beards said:
Where's your nearest Service Centre???
Click to expand...
Click to collapse
texas you have to send it to samsung
Shame..... In the UK we are quite lucky in having an abundance of centre's.
I have three within 10 miles.
I think mine is only 15 minutes away ... would it be covered in warranty?
So, I can no longer even get to the download screen on my Fascinate.
It won't connect to Odin, or even (long shot, I know) to Kies. I've tried the "remove sd, sim and battery, plug in, hold volume buttons and reinsert battery" technique. All that happens is I get a little "device not connected to PC" icon (there is no text, just a pic of a device, an error triangle, and a PC).
When I try to connect to the PC without powering on (to charge the battery), the loading spinner comes up and the device freezes.
Any ideas? I think I might be screwed, here...
muad-dib said:
So, I can no longer even get to the download screen on my Fascinate.
It won't connect to Odin, or even (long shot, I know) to Kies. I've tried the "remove sd, sim and battery, plug in, hold volume buttons and reinsert battery" technique. All that happens is I get a little "device not connected to PC" icon (there is no text, just a pic of a device, an error triangle, and a PC).
When I try to connect to the PC without powering on (to charge the battery), the loading spinner comes up and the device freezes.
Any ideas? I think I might be screwed, here...
Click to expand...
Click to collapse
Phone should still be under warranty, as long as you're the original owner on the original account. Take that ***** back.
It would be useful to know exactly what action you think killed it.
The error you describe sounds exactly like you tried to boot after an incomplete or incorrect Odin.
Actually killing download mode for real is extremely rare, so it would be helpful to know how you did it.
Battery is totally optional for download mode.
1. Pull battery (to be sure phone is off). Leave the sd card alone.
2. Plug into pc, while holding down vol - (do not let go ever unless you see a yellow triangle)
3. If nothing happens, press power until you see any screen activity.
Just posting in case it is helpful, chances are download mode got your device to where it is now.
Swyped w/ XDA App. When in doubt, mumble.
scriz said:
Phone should still be under warranty, as long as you're the original owner on the original account. Take that ***** back.
Click to expand...
Click to collapse
Original owner on original account, but rooted the phone and failed flashing the firmware (connection got interrupted mid-flash). Think warranty will still cover it? I'm with Telus in Canada.
The error you describe sounds exactly like you tried to boot after an incomplete or incorrect Odin.
Click to expand...
Click to collapse
Yep.
Actually killing download mode for real is extremely rare, so it would be helpful to know how you did it.
Battery is totally optional for download mode.
1. Pull battery (to be sure phone is off). Leave the sd card alone.
2. Plug into pc, while holding down vol - (do not let go ever unless you see a yellow triangle)
3. If nothing happens, press power until you see any screen activity.
Click to expand...
Click to collapse
Absolutely nothing happened. Phone was off, battery pulled. Left the sim out, didn't touch the SD card. Plugged it in while holding vol - (then repeated this with vol +, vol + and -), tried the power button - absolutely no screen activity. It appears I done killed it but good. D:
Thanks for trying though.
muad-dib said:
Absolutely nothing happened. Phone was off, battery pulled. Left the sim out, didn't touch the SD card. Plugged it in while holding vol - (then repeated this with vol +, vol + and -), tried the power button - absolutely no screen activity. It appears I done killed it but good. D:
Thanks for trying though.
Click to expand...
Click to collapse
The Fascinate shouldn't have a SIM unless you're on Telus. If you are on Telus, what are you trying to flash with Odin?
imnuts said:
The Fascinate shouldn't have a SIM unless you're on Telus. If you are on Telus, what are you trying to flash with Odin?
Click to expand...
Click to collapse
wtb separate forums for verizon and telus.
Welp, took the phone back into Telus, they replaced it in-store no questions asked. Hooray for good service
Anything posted here requiring Odin that I've seen is meant only for the VZW Fascinate.
imnuts said:
Anything posted here requiring Odin that I've seen is meant only for the VZW Fascinate.
Click to expand...
Click to collapse
Yeah, at the time I didn't realize there was a difference between the two. Ah well, lesson learned.
Yet another reason for splitting the forums. Not sure how many more of these posts will be required before the mods take some action, but hopefully they will see your post and your phone will not have died in vain
Glad you got it exchanged.
Sent from my SCH-I500 using XDA App
Asking the admins...
For future reference, you can assemble a jig out of a couple of cheap electronic parts that will put any Galaxy S into download mode. Check the i9000 forums.
Sent from my Voodoo-powered Fascinate via XDA
hey guys, ive never really had any issues far as flashing rom on my phone, ive always just figured things out on my own without the need to ask a question however this one baffles me....
last night i flashed nero v5 over axura 2.2.6, no issues with that the phone rebooted, i let it sit about 10 mins rebooted no problems still so i started setting up the phone like i like it, well the first issue was the market wouldnt download anything at all period, so i reflashed, same thing, i then tried to go to back to axura at which went fine until the phone booted up and is stuck at the devsforandroid splash screen
now naturally the thing to do is hold volume up and volume down plus power get into download mode and odin to stock well heres my dilemma...
my volume up button hasnt worked for a few weeks, not sure why, its just stopped working one day.
is there a way to get into download mode while stuck in a boot loop with the volume button broken?
thanks for any help
chevyman46933 said:
hey guys, ive never really had any issues far as flashing rom on my phone, ive always just figured things out on my own without the need to ask a question however this one baffles me....
last night i flashed nero v5 over axura 2.2.6, no issues with that the phone rebooted, i let it sit about 10 mins rebooted no problems still so i started setting up the phone like i like it, well the first issue was the market wouldnt download anything at all period, so i reflashed, same thing, i then tried to go to back to axura at which went fine until the phone booted up and is stuck at the devsforandroid splash screen
now naturally the thing to do is hold volume up and volume down plus power get into download mode and odin to stock well heres my dilemma...
my volume up button hasnt worked for a few weeks, not sure why, its just stopped working one day.
is there a way to get into download mode while stuck in a boot loop with the volume button broken?
thanks for any help
Click to expand...
Click to collapse
well for me to get into download mode i dont hold the power button... i know you said your volume button doesnt work, but try taking out the battery, put it back in, hold both volume buttons down, while holding the vol buttons plug in the usb cord to the phone... BUT HAVE ODIN READY TO GO BEFORE YOU DO ANYTHING... try doing that if not your gonna have to use adb and thats something im not very familiar with at all...
The above post is right you can also try just holding the down volume button and then while holding it down, plug in the usb cord, make sure you have odin up and ready if it sees then, you are good to go, (it should) You could also use the jig (see the bible for this) once you get the little android with a shovel you can odin back to stock
If you know how to use adb you can type "reboot download mode" and it should reboot into it. Ya I dont ever use the power button when I get into dl mode but hell if your volume buttons aren't all working then I dont know.
Sent from my SGH-T959 using XDA App
AustinKnight45 said:
If you know how to use adb you can type "reboot download mode" and it should reboot into it. Ya I dont ever use the power button when I get into dl mode but hell if your volume buttons aren't all working then I dont know.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
is there a tutorial on this anywhere? i have never used adb never had any use for it i guess until now...
ive also switched to sprint and got the evo 4g, so should i not be able to fix the vibrant i guess ill sell it to whomever can fix it for cheap
p.s. not that anyone cares but when i swtiched carriers i was discussing the samsung epic with him about the update problems we face with the vibrant, and he showed me that in their monthly employee playbook they just got for next month (february), the epic is in it to recieve the foryo update (some time in february),i read it and it didnt say specifically 2.2 or 2.2.1 just froyo, but like always whos know if itll happen or not, probably not but its what he showed me