What happens when you don't read instructions (Video) - Vibrant General

This is a video I made to show what happens when you mess with your phone without doing research in advance. Thought some of you might enjoy and some of you might take as a learning experience
http://www.youtube.com/watch?v=g4Ln15Al0qk

Haha I did laugh "someone help me please"
Sent from my SGH-T959 using Tapatalk

lol great video!
"Congratulations... You have successfully bricked your phone"

Can you access download mode ?!
Read this,
METHOD 2: STUCK AT VIBRANT SCREEN:
(and are not able to use vol+ vol- methods to access downloader/recovery)
You will need the samsung ADB drivers installed for your phone as well as ADB…
ACCESS DOWNLOAD MODE
1) remove back cover and take our sim card and sd-card.
2) take out the battery
3) hold ALL 3 buttons down at the same time. (Vol +, Vol -, Power)
4) while holding down those 3 buttons put the battery back in
5) continue holding all 3 buttons until the vibrant disappears and reappears… once it reappears, release all 3 buttons
6) Setup ODIN and get it all setup and ready… (if you are flashing your phone via odin)
6) now connect your phone to your pc via USB cable
7) open a cmd prompt and navigate to the folder with ADB and type ADB REBOOT DOWNLOAD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your phone will reboot into the download screen… go back to ODIN – A com port should now appear for your phone…
9) Click start and wait for your phone to do its thing
ACCESS STOCK RECOVERY
1) remove back cover and take our sim card and sd-card.
2) take out the battery
3) hold ALL 3 buttons down at the same time. (Vol +, Vol -, Power)
4) while holding down those 3 buttons put the battery back in
5) continue holding all 3 buttons until the vibrant disappears and reappears… once it reappears, release all 3 buttons
6) now connect your phone to your pc via USB cable
7) open a cmd prompt and navigate to the folder with ADB and type ADB REBOOT RECOVERY
Your phone will reboot into the stock recovery and flash whatever update.zip you need
Click to expand...
Click to collapse

Haha.. "I don't actually know what it is called, it says Galaxy"

lmfao, i would love to have that as my startup anim and sound

That video was funny! "Somebody help please???" lol

Br1cK'd said:
lmfao, i would love to have that as my startup anim and sound
Click to expand...
Click to collapse
Me too that brick is awesome looking even a wallpaper of it would be great
Times never wasted when your getting waisted

"I wanted to make all fast.... and stuff."
Too funny.

is there an app for "I brick my phone"?

Hahaha.. this video is great. Thanks for making me LOL at work. Everyone around me was looking at me with a WTF face.

Awesome Video !!!
I too want the brick animation at start up. LMFAO !!! This made my Day Thanks Allen K

Hahaha! That made my day. Thank you for this.
"Somebody help please? Ummm..."

Allen k for governor!

Wow, just....wow. Anyway, to the OP, you should search this forum. You will find your answers. I want that as a boot up sound too. Too funny
Sent from my SGH-T959 using XDA App

rofl!!!! THAT'S AWESOME.

I don't think that you can fix that type of brick, I haven't seen it before

Ive never seen that either
Sent from my SGH-T959 using XDA App

That was amazing lol
Sexy Vibrant featuring Bionix Fusion 1.1. JAC's OC/UV kernel, FFC installed

Omg to funny, "best I can do is......ummmm....i don't know " fooking class right there
Sent from my SGH-T959 using XDA App

Related

Need to turn on Moto X Pure *without* power button (not rooted)

Hello all,
I'm in a jam here and hoping one of you can help me out.
The power button on my Moto X Pure Edition, which is not rooted, has stopped working completely. The battery died overnight and, obviously, the phone powered off. Now I can't turn it back on. I'd like to get it turned on or at least get my personal data off of it. Does anyone have any ideas?
I have figured out how to get it into AP Fastboot Flash Mode by holding down the Volume Up & Volume Down buttons simultaneously while plugging it into a power source. But, I cannot select "START" (or anything else) from Fastboot because my power button doesn't work.
Hoping I can figure out how to do this without taking apart the phone, which will void my warranty and probably won't result in me being able to fix it anyway.
Thanks so much for your help!
lowbar said:
Hello all,
I'm in a jam here and hoping one of you can help me out.
The power button on my Moto X Pure Edition, which is not rooted, has stopped working completely. The battery died overnight and, obviously, the phone powered off. Now I can't turn it back on. I'd like to get it turned on or at least get my personal data off of it. Does anyone have any ideas?
I have figured out how to get it into AP Fastboot Flash Mode by holding down the Volume Up & Volume Down buttons simultaneously while plugging it into a power source. But, I cannot select "START" (or anything else) from Fastboot because my power button doesn't work.
Hoping I can figure out how to do this without taking apart the phone, which will void my warranty and probably won't result in me being able to fix it anyway.
Thanks so much for your help!
Click to expand...
Click to collapse
Do you have fastboot installed on your computer? If you do then issue the following command : fastboot reboot
Your phone will now start up.
If you don't, install it. You will have to research how to do it for your system. I'm on Arch Linux, so won't know how to help you, but there will be a google guide.
sr.perro said:
Do you have fastboot installed on your computer? If you do then issue the following command : fastboot reboot
Your phone will now start up.
If you don't, install it. You will have to research how to do it for your system. I'm on Arch Linux, so won't know how to help you, but there will be a google guide.
Click to expand...
Click to collapse
Thank you for the suggestion. Got fastboot installed (used this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) but it doesn't appear to be recognizing my device. See attached image. Still working on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lowbar said:
Thank you for the suggestion. Got fastboot installed (used this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118) but it doesn't appear to be recognizing my device. See attached image. Still working on it.
Click to expand...
Click to collapse
Hilarious. After an hour of fumbling around I figured out the USB port I had the phone plugged into was bad. Plugged it into one on the other side of the computer, recognized, rebooted, good to go.
Thanks so much for your help.
lowbar said:
Hilarious. After an hour of fumbling around I figured out the USB port I had the phone plugged into was bad. Plugged it into one on the other side of the computer, recognized, rebooted, good to go.
Thanks so much for your help.
Click to expand...
Click to collapse
Glad you sorted it.
sr.perro said:
Glad you sorted it.
Click to expand...
Click to collapse
hey man. Im having the same issue with my phone, but no matter what i do my pc still wont detect my phone. i don tknow what to do please help.

Unable to access Download/Recovery Mode after bad flash

So my brother in-law decided to try flashing a ROM onto his Galaxy S7 SM-G930 but somehow managed to flash a ROM meant for the Galaxy S7 Edge SM-G935. Needless to say this resulted in some serious issues. He tasked me with trying to fix his mess, but so far I am at a loss. Here is what I have tried to get the proper firmware back onto the device:
Galaxy S7 Recovery = No worky
* Tried Vol Down + Home + Power
- Results in some kind of diagnostics menu that is in Chinese or something
- Managed to get phone to go to fast boot from here, which has at least aloud the phone to boot and have a useable interface.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy S7 Edge Recovery = No Worky
* Pressing Vol Up + Home + Power
- Results in option to Select Boot Mode (YAY!!! Right? ....Maybe not)
- I select recovery Mode and it freezes for a couple minutes, then reboots the phone without enter recovery mode.
Basically I am not seeing a way for me to get to the point where Odin is helpful. Does anybody have any other options or suggestions I could try?
Have you tried to see if adb works on any of those modes? If it does try to adb reboot bootloader
adb not working either
benbailey84 said:
Have you tried to see if adb works on any of those modes? If it does try to adb reboot bootloader
Click to expand...
Click to collapse
I did try adb after making my post yesterday. I was able to connect to it fine, and was able to use adb reboot bootloader which gets me to fastboot. Nearly everything I did there didn't give me good results. Including fastboot reboot emergency which results in the phone restarting normally.
Also doing adb reboot recovery results in normal restart after pausing at all black screen for 1-2 minutes.
Did you try to flash a stock image via Odin after you ran the adb reboot bootloader?
Sent from my SAMSUNG-SM-G930A using Tapatalk
benbailey84 said:
Did you try to flash a stock image via Odin after you ran the adb reboot bootloader?
Sent from my SAMSUNG-SM-G930A using Tapatalk
Click to expand...
Click to collapse
Odin doesn't see the phone :|
Looks like a fake galaxy, I can be wrong
genica said:
Looks like a fake galaxy, I can be wrong
Click to expand...
Click to collapse
You know, I suspected that when I first saw the diagnostics screen all in a foreign language. After digging into it and checking the firmware and comparing to iFixit's teardown of an S7, I am leaning heavily toward this being a knock off device.

Switching on/off Moto g4plus without power button

hi guys,
the power button on my phone is broken. the battery drained and now i'm unable to switch on my phone. is there any way to do so, without using a power button?
thanks in advance
blazeshark06 said:
hi guys,
the power button on my phone is broken. the battery drained and now i'm unable to switch on my phone. is there any way to do so, without using a power button?
thanks in advance
Click to expand...
Click to collapse
Yes there is, buy a new button from amazon or witring, welcome[emoji6]
Sent from my Moto G4 Plus using Tapatalk
blazeshark06 said:
hi guys,
the power button on my phone is broken. the battery drained and now i'm unable to switch on my phone. is there any way to do so, without using a power button?
thanks in advance
Click to expand...
Click to collapse
This worked for me on previous models but I haven't tested it on the G4 but hopefully it will still work.
Plug in the charger and long press the volume down key simultaneously.
There you will get the options screen for normal reboot, reset etc.
You can use the volume down key to scroll and the volume up to select.
It takes a little timing but if you do them at exactly the same time it should work.
Sent from my SM-T530NU using Tapatalk
Hey I'm having the same issue as this guy and my Moto G4 doesn't work like that as the volume up button only scrolls onto the next option not selecting it, I hope you're able to help as I have no clue what to do
Sythiuisx said:
Hey I'm having the same issue as this guy and my Moto G4 doesn't work like that as the volume up button only scrolls onto the next option not selecting it, I hope you're able to help as I have no clue what to do
Click to expand...
Click to collapse
That's bootloader screen,
You need PC and Fastboot installed on your PC,
Then run "fastboot reboot" command and it will start. (search general threads to know about fastboot setup and how to do it.)
"fastboot reboot emergency" works for me.
____Mdd said:
That's bootloader screen,
You need PC and Fastboot installed on your PC,
Then run "fastboot reboot" command and it will start. (search general threads to know about fastboot setup and how to do it.)
Click to expand...
Click to collapse
Where can I find where to download PC and Fastboot for my computer?
I'm unable to turn on my phone because the power button is broken and my battery has drained out. I tried the technique where I hold the charager in place and press the down portion of the volume button. Which option is best to select for me to turn on my phone?
Use a pin. I have my volume buttons broken. And there's some gap and I can push the pin in this area and it works fine. You can try the same with power button
I found the fix, I turned on my Moto G4 without a power button plus it was completely off.
1. Connect your USB Cable to the computer.
2. You have to put the charger & hold the volume down key at once. (Requires slight timing)
3. It will load you to the Fastboot Flash Screen Secure
4. Then manually install the ADB Driver, by going to Device Manager (Windows) right click > properties > update driver > select manually > select from list > click next > have disk > load the .inf driver file. You can get the Moto G4 driver online e.g. Google USB Drivers.
5. Install ADB Minimal & Fastboot then open it.
6. Type fastboot devices to see your device there.
7. Now type fastboot reboot
That's it.
If you face an error of bootloader slot not found, please use Minimal ADB Version 1.4 and do the process again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Got something new !! FFBM mode

Hello devs and my noob fraans
I am so Happy with this device and all of its developments.
But the only thing I always wanted is to remove that screen which we get when we start our phone in which start is given and and gateway to recovery we have to wait for 5s there or every time to press that start button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
so finally yesterday I was seeing around and went to fast boot mode and restarted my phone in FFBM MODE AND BOOM !!! that screen disappeared I again restarted my phone normally and after that everytime its not coming.
Well yes you also can restore this by going into fast boot again and reboot your device normally from there.
I am currently on aex 5.8 .
May be its a noob thing but I felt many of you need this soo..I posted
And one thing if any pro is reading this
Please tell me what is this ffbm mode and if there are any disadvantages of it..as I am using since 2 days now and no differences are there.
Sorry didn't work for me!!!
supermean1 said:
Hello devs and my noob fraans
I am so Happy with this device and all of its developments.
But the only thing I always wanted is to remove that screen which we get when we start our phone in which start is given and and gateway to recovery we have to wait for 5s there or every time to press that start button so finally yesterday I was seeing around and went to fast boot mode and restarted my phone in FFBM MODE AND BOOM !!! that screen disappeared I again restarted my phone normally and after that everytime its not coming.
Well yes you also can restore this by going into fast boot again and reboot your device normally from there.
I am currently on aex 5.8 .
May be its a noob thing but I felt many of you need this soo..I posted
And one thing if any pro is reading this
Please tell me what is this ffbm mode and if there are any disadvantages of it..as I am using since 2 days now and no differences are there.
Click to expand...
Click to collapse
What is FFBM Mode and pls tell us step by step.
rakeshsainixyz said:
What is FFBM Mode and pls tell us step by step.
Click to expand...
Click to collapse
To go to ffbm you have to go to fastboot mode first then you have to scroll there for ffbm mode I only have seen this in zuk z2 if you are using another phone then I don't know
This is nice and all, but what if your rom get screwed up and you can't reboot to fastboot via software? Is there a button combination to boot into fastboot via hardware?
pipyakas said:
This is nice and all, but what if your rom get screwed up and you can't reboot to fastboot via software? Is there a button combination to boot into fastboot via hardware?
Click to expand...
Click to collapse
Nope, ZUK didn't like the idea of button combination so opted for this screen and I would highly refrain from removing it. I really like the screen btw :angel: And love it when something goes wrong and I can just go through it to Nirvana.
I have z2 pro and this method is not working here.
This screen also shows up on my orbic wonder

I'm having an issue with my G Pad 7 (LG-LK430)

Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
arksoother said:
Heres the problem I started getting after I took the update from Magisk this morning. I did the update through Magisk app using their recommended method of flashing it I believe and I think thats how the problems started.
it just boot loops now with that message over and over again. On top of that error I am unable to boot into Download Mode or Recovery, I get this when I try to:
Any one have any ideas on how to fix this, I'm all ears. Thanks for the help
Click to expand...
Click to collapse
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
rahimali said:
Try flashing Mr. Bump linked here -> https://forum.xda-developers.com/showpost.php?p=68638985&postcount=54
Click to expand...
Click to collapse
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
arksoother said:
So here's the problem with doing this, I have no way of flashing Mr.Bump at the moment with the stupid tablet looping like it is. When I plug in the tablet I don't get the bepoop from my laptop telling me its plugged in and ready to go unless I press the power button and volume down. But then I get what the second picture showed, at that point then the pc does the bepoop sound but I still can't do anything with the tablet. So I guess my next question is how do I flash or use this with the state my tablets in? Thanks.
Click to expand...
Click to collapse
Can you not even boot into bootloader/fastboot or TWRP/recovery?
You should be able to boot to recovery by following the steps shown here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/recovery-mode/
You could also try and boot into safe mode and try and use the magisk manager to uninstall magisk - howto here -> https://www.hardreset.info/devices/lg/lg-lk430-g-pad-f-70/safe-mode/
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
arksoother said:
okay update, so if you look at the fsecond picture it says fastboot_init() I assume this means its initialised? I have no idea what any of the stuff below that means. when I do the recovery mode it shows the words recovery for like a second then gives me the black screen with white text that you see in picture 2. when I try the other method all the tablet does is bootloop with a new error code of 2250 I think. So I have know idea whats going on with this. I'll try uninstalling Magisk like you said but things are looking bleak I feel?
Click to expand...
Click to collapse
somebody else apparently had the same experience although on a different LG device -> https://forum.xda-developers.com/lg-spirit/help/help-fastboot-error-loading-keystore-t3430163
So it seems that fastboot commands may have been disabled which means you can't interact with the device in fastboot mode whatever you do.
If nothing else works, you could try and re-flash stock ROM if you can manage to get into download mode.
Best of luck!

Categories

Resources