This is based off of the new Froyo I897UCJJ4 leak.
Pre-Cog-Kernel - I am building a multi stage kernel so I can include all of the goodies like Atinm and Supercurio have done. (not very fun, multistage is lame!)
Changelog:
ClockWordMod Recovery (thanks to Atinm)
---Fixed /tmp not mounting
---Replace recovery binary with one from the market (Atinm added in some menu options that I deleted binaries for to save space)
Custom boot animations (/system/media/bootanimation.zip)
---Properly moved up the int list so there is no delay
User Scripts (/system/etc/init.d)
Removed FM Radio module and int code (it's useless)
This allows for nandroid backups and flashing anything you want!
Known Issues:
If you do a factory reset you will have to flash the stock recovery so it can set things up again.
Download:
http://www.ponack.net/designgears/I897UCJJ4_precogkernel.tar
designgears said:
This is based off of the new Froyo I897UCJJ4 leak.
Pre-Cog-Kernel - I am building a multi stage kernel so I can include all of the goodies like Atinm and Supercurio have done. (not very fun, multistage is lame!)
Changelog:
ClockWordMod Recovery (thanks to Atinm)
---Fixed /tmp not mounting
---Replace recovery binary with one from the market (Atinm added in some menu options that I deleted binaries for to save space)
Custom boot animations (/system/media/bootanimation.zip)
---Properly moved up the int list so there is no delay
User Scripts (/system/etc/init.d)
Removed FM Radio module and int code (it's useless)
This allows for nandroid backups and flashing anything you want!
Download:
http://www.ponack.net/designgears/I897UCJJ4_precogkernel.tar
Click to expand...
Click to collapse
WOOHOO!!! D/l-ing to test right now....
Guessing it doesn't have the voodoo inject then yet? Sounds like this might be a good kernel once it gets voodoo.
Keep up the good work!
NiXXeD said:
Guessing it doesn't have the voodoo inject then yet? Sounds like this might be a good kernel once it gets voodoo.
Keep up the good work!
Click to expand...
Click to collapse
Ya, working on that right now, I have to build a mutistage initramfs, which I have never done before..
The new leak is pretty snappy tho
designgears said:
Ya, working on that right now, I have to build a mutistage initramfs, which I have never done before..
The new leak is pretty snappy tho
Click to expand...
Click to collapse
Wait, when you say build, does it mean source? Or is it still inject?
NiXXeD said:
Wait, when you say build, does it mean source? Or is it still inject?
Click to expand...
Click to collapse
Still inject...
You will wont to grab the kernel again, I uploaded a stock one, its fixed now.. lol
designgears said:
Still inject...
You will wont to grab the kernel again, I uploaded a stock one, its fixed now.. lol
edit---
ok, now it boots to recovery everytime, failll...
fixing now
Click to expand...
Click to collapse
Flashed the new firmware... set most of my "settings" back up...... installed tibu and restored my apps. Then I saw this...... flashed this kernel and am now playing...... most apps working so far... will repost when i finish trying them all.
techmik67 said:
Flashed the new firmware... set most of my "settings" back up...... installed tibu and restored my apps. Then I saw this...... flashed this kernel and am now playing...... most apps working so far... will repost when i finish trying them all.
Click to expand...
Click to collapse
Heh, good good, its all fixed now, that edit was a false alarm, I flashed stock then my kernel, and it can't handle that initial setup recovery does, so stuck in recovery is what happen.
You are on top of it like nobodies business, DG. Keep it up!
So we cannot use voodoo with this yet.....correct?
Sent from my SAMSUNG-SGH-I897 using XDA App
amwbt said:
So we cannot use voodoo with this yet.....correct?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That is correct.
Nice Boot Animation
and of course all the other geeky stuff. Thanks, am now running this on optimized jj4
Sorry for being such a newb, but can someone post a step-by-step on how to flash this kernel and then the ROM found here: http://forum.xda-developers.com/showthread.php?t=826138 ?
chipsa964 said:
Sorry for being such a newb, but can someone post a step-by-step on how to flash this kernel and then the ROM found here: http://forum.xda-developers.com/showthread.php?t=826138 ?
Click to expand...
Click to collapse
Just wait and I bet DG releases a full rom with this all integrated VERY soon.... =)
I hope so...I keep checking back on that thread and it's been at 9.1.3 for almost 3 days now! I'm still at Beta9, which is working really well for me, but I want the newest stuff
btw holy crap, delray beach....you live 3 minutes from me :O
chipsa964 said:
btw holy crap, delray beach....you live 3 minutes from me :O
Click to expand...
Click to collapse
There are a bunch of S FL people around...... =)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
techmik67 said:
There are a bunch of S FL people around...... =)
Click to expand...
Click to collapse
haha who else? I just thought it was pretty random that you are from my town... nice build btw
chipsa964 said:
Sorry for being such a newb, but can someone post a step-by-step on how to flash this kernel and then the ROM found here: http://forum.xda-developers.com/showthread.php?t=826138 ?
Click to expand...
Click to collapse
you would flash the rom, and then flash the kernel.
JimmehDean said:
you would flash the rom, and then flash the kernel.
Click to expand...
Click to collapse
I tried flashing this and when it rebooted it just sat on the ATT screen for the longest time. Did it just need more time?
Related
Just wondering if anyone has his kernel in a flashable zip? I've tried to extract it and make my own, but having problems.. Thanks.
boredmug said:
Just wondering if anyone has his kernel in a flashable zip? I've tried to extract it and make my own, but having problems.. Thanks.
Click to expand...
Click to collapse
i was told to just use the boot.img from fresh toast. insert it into the rom of ur choice and flash it. it worked for me.
you can't just insert it into the zip though right? Do you know of a tutorial that will tell me how to do it?
boredmug said:
you can't just insert it into the zip though right? Do you know of a tutorial that will tell me how to do it?
Click to expand...
Click to collapse
i put the boot.img right into the zip then resigned and flashed. worked fine for me
This is a signed zip of the boot.img. Kernel 2.6.29-GoDmOdE-OC-BFS [email protected] #89 Should work. I am using this one in a custom cooked rom, signed the update myself.
http://www.4shared.com/file/m8rEPxk2/update_signed.html
smstutler said:
This is a signed zip of the boot.img. Kernel 2.6.29-GoDmOdE-OC-BFS [email protected] #89 Should work. I am using this one in a custom cooked rom, signed the update myself.
is this flashable over the current rom we are using or does it have to be inserted in a rom zip folder..... in other words how is this applied
Click to expand...
Click to collapse
grr.. i tried to flash this update to sushi rom and it gave error can't find update script
boredmug said:
grr.. i tried to flash this update to sushi rom and it gave error can't find update script
Click to expand...
Click to collapse
yep same here
smstutler said:
This is a signed zip of the boot.img. Kernel 2.6.29-GoDmOdE-OC-BFS [email protected] #89 Should work. I am using this one in a custom cooked rom, signed the update myself.
http://www.4shared.com/file/m8rEPxk2/update_signed.html
Click to expand...
Click to collapse
you didnt include an update script you just signed it.
here is an update.zip with # 89 kernel. idk what it will and wont work on.
im not responsible for loss of rom. nandroid, apply, see what happens. i recommend using set cpu and min-245 max-729
this allows for the best stepping.
tried it on damage 2.07.2.3333 with jit enabled... wouldnt go past the htc screen
same on Icerom and Sushi. Sticks at the HTC screen
Avalaunchmods said:
you didnt include an update script you just signed it.
here is an update.zip with # 89 kernel. idk what it will and wont work on.
im not responsible for loss of rom. nandroid, apply, see what happens. i recommend using set cpu and min-245 max-729
this allows for the best stepping.
Click to expand...
Click to collapse
Thanks. Wasn't sure. Now I know a lil more than I did yesterday.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aloysius 2.0.9 sticks at the HTC screen also.
ill throw a new update later. i know why this one isnt working ill have to make some changes in the ramdisk.
I am also very very interested in a flashable zip aswell!
Avalaunchmods said:
ill throw a new update later. i know why this one isnt working ill have to make some changes in the ramdisk.
Click to expand...
Click to collapse
Will you be posting it here?
Its not going to work when flashing to a damage control rom or one thats based off of damage like most roms here are. Also it will not work on darchdroid.
The only rom the kernel will work on is fresh or fresh toast or one based on it.
You have to pull the boot.img apart and put ramdisk from your current rom and the kernel from fresh toast. And then add the necessary lines to init.rc and etc so you can have bfs and compache and all working. You might even need the config file from your current rom to put into the kernel, which you would have to compile your own kernel using toasts github source.
Who wants to be a quick test dummy thats running damage control.
Here is quick boot.img i put together so theres a chance it might not work, its a flashable update.zip so you can do it in recovery. I used avalauches .zip he posted earlier just changed the boot.img. Make a nandroid before flashing.
This is fresh toast kernel
flashing now
let me know if there is anything specific I can tell you.
I would know what if anything to look for in a logcat, I'm just gonna dl setcpu and check it out
*edit-
SetCpu is showing 768MHz max, I'm watching it fluctuate between 19 and 768...
No fc's, normal boot time
So far so good
nebenezer said:
flashing now
let me know if there is anything specific I can tell you.
I would know what if anything to look for in a logcat, I'm just gonna dl setcpu and check it out
SetCpu is showing 768MHz max, I'm watching it fluctuate between 19 and 768...
No fc's, normal boot time
So far so good
Click to expand...
Click to collapse
The boot.img i just posted worked on damage control?
For those among us who aren't terribly comfortable using the RageAgainstTheCage method to root this sucker there is an alternate method! This method DOES however require some familiarity with Odin, so if you aren't cool with that or if you have zero experience using key combinations or flashing I wouldn't recommend this.
Things you'll need:
JI6 Kernel
http://www.multiupload.com/FEJ1YHMM2I
JF6 Kernel
http://koush.tandtgaming.com//test/kernel-captivate-stock.tar.md5
Root via update.zip
http://www.multiupload.com/02RXSWORVC
And Odin of course (NOT THE ONE CLICK DOWNLOADER)!
http://www.multiupload.com/DLS7TWUVPY
1. Place the update.zip on your internal SD card.
2. Power down your phone
3. Boot into download mode and set up with Odin
4. Place the JF6 kernel into the PDA slot, and uncheck auto reboot, hit start
5. Once Odin has finished, remove your battery and close Odin.
5.5 Also remove the USB cable!
6. Put your battery back in, press and hold both volume buttons, and power on
7. You SHOULD be in stock recovery now, select "Reinstall Packages" the root update.zip should run.
8. As soon as the phone attempts to reboot, remove the battery, start Odin, use key combos to get back into Odin
9. Flash the JI6 kernel back to the phone
10. Profit!
Lovely post fellow name sharer
Sent from my SAMSUNG-SGH-I897 using XDA App
Why do you go from the JF6 to JI6? Just wondering
Why am I too entoxicated to flash my ****?! Zilch I blame you...
P.S Did you get my beer and hookers?
Sent from my GT-I9000 using XDA App
whoa...definitely a weird way to go about things, but also seems easier (for the average user) to successfully root.
on the other hand, i would be willing to bet a one-click will be up tomorrow (someone said they would do it, don't remember who).
anyways...like always zilch pulls through! nice job man
The reason you have to switch, is that the JI6 kernel enforces Signature Verification on update.zip packages, so using the root zip package fails horribly. However JF6 does not share the same opinions on unsafe update packages and will eagerly gobble up whatever you feed it
LinuxNewb said:
Why am I too entoxicated to flash my ****?! Zilch I blame you...
P.S Did you get my beer and hookers?
Click to expand...
Click to collapse
You're NEVER too intoxicated for flashing
And no.. I'm still waiting, sir!
Zilch25 said:
The reason you have to switch, is that the JI6 kernel enforces Signature Verification on update.zip packages, so using the root zip package fails horribly. However JF6 does not share the same opinions on unsafe update packages and will eagerly gobble up whatever you feed it
Click to expand...
Click to collapse
Somehow, your nerdiness is so amazing that even what you say is just sexy. I look.forward to waking up in 13 hours
*edit* in December I'll be in miami... I'll buy you hookers and some beer then
Sent from my GT-I9000 using XDA App
I'm glad I got to read this before you sobered up and edited the post I'm not quoting it just in case you DO decided to change it later though haha
Zilch25 said:
I'm glad I got to read this before you sobered up and edited the post I'm not quoting it just in case you DO decided to change it later though haha
Click to expand...
Click to collapse
Oh hell no I know this is an epic quote... We have smoked so much and drank so much I'm still coherent enough to start backing my **** up in Titanium. I have to disable voodoo
P.S I love you
P.P.S Why the mod edit doesn't this new Xda app allow png uploads?!
Sent from my GT-I9000 using XDA App
Rofl Linuxnewb these posts are fantastic =P
Or use rageagainstthecage
http://forum.xda-developers.com/showthread.php?t=797397
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Say goodbye to 2.1 everyone!! Here's to inoperable phones for lengthy periods of time because we're *MOD EDIT* with our ****.
P.S Zilch for President
Sent from my GT-I9000 using XDA App
CLShortFuse said:
Or use rageagainstthecage
http://forum.xda-developers.com/showthread.php?t=797397
Click to expand...
Click to collapse
Which is why I mentioned specifically in the OP that this is for people who didnt WANT to do that... but thanks anyway =P
Should I crosspost in your thread too?
Dont get catty...
Zilch25 said:
Which is why I mentioned specifically in the OP that this is for people who didnt WANT to do that... but thanks anyway =P
Should I crosspost in your thread too?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
I don't seem to have the option to allow unknown source installs on this build. is is just me or was this removed? Trying to restore some apps through titanium but it's not working...any ideas?
bxxpeace said:
I don't seem to have the option to allow unknown source installs on this build. is is just me or was this removed? Trying to restore some apps through titanium but it's not working...any ideas?
Click to expand...
Click to collapse
This just adds root, not sideloading CLShortfuses thread covers the sideloading stuff. Also, for some reason Titanium is messed up on this froyo build, can't find the apks =(
Thank you. I knew this didn't do the sideloading...I should've mentioned that I tried to sideloading manual way but it didn't understand cp....i'll check the other threads. Thanks for the quick reply!
Zilch25 said:
This just adds root, not sideloading CLShortfuses thread covers the sideloading stuff. Also, for some reason Titanium is messed up on this froyo build, can't find the apks =(
Click to expand...
Click to collapse
try to install latest version or reinstall.. ran into that problem mine seems fine to me @[email protected]
wait are you talking about uninstalling the crapware? then nvm X_x lol
Zilch25,
You da man. The JI6 kernel is what I have been waiting on. I rooted (using the JPH kernel swap method) and have been sitting on the i9000 JPH 2.2 kernel, trying to figure out how to dump the JI6 kernel.
Did you dump the JI6 kernel your self? Do mind sharing a link or a quick PM on how you dumped this?
Thanks
tikidroid said:
Zilch25,
You da man. The JI6 kernel is what I have been waiting on. I rooted (using the JPH kernel swap method) and have been sitting on the i9000 JPH 2.2 kernel, trying to figure out how to dump the JI6 kernel.
Did you dump the JI6 kernel your self? Do mind sharing a link or a quick PM on how you dumped this?
Thanks
Click to expand...
Click to collapse
Actually credit goes to designgears for grabbing the kernel first, he beat me to root by about 5 minutes haha, I did however repack it for flashing myself =P But if you're interested in how to pull it, you need root first obviously, then from adb shell:
Code:
cat /dev/block/bml7 > /sdcard/zImage
Then you just have to pack it up properly to be "Odin friendly"
Now available on rommanager and the Biffmod home page http://ibmirror.us/biffmod
Biffmod for cappy is here. I think you'll enjoy it.
The goal here was to create a stock 2.3.5 feel for the cappy , preserve the customization options of Cyanogenmod, and add the features I felt were missing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty on your phone has long been voided. If it explodes.... NOT IT!
Features:
*Mix of AOSP/cm7 - 2.3.5
*black launcher2
*black camera
*notification widgets
*overclock capable kernel (1.7ghz)
*voodoo color and sound
*BLN/LED Notifications (on by default, the BLN app is not compatible)
*Ricktips
*glitch kernel HL thanks TK-Glitch
This should be good for daily driver. I do not own a captivate, I own a vibrant. This is a blind port that I will support as best I can.
Credit goes to : koush, cyanogenmod team, TK-Glitch, jonathangrigg, samsung, google, your mother (if i missed someone, PM me and I'll fix it. Don't want anyone feeling like I kingklickxd them)
Thanks to the patient community for putting up with mah "devvin"
I don't care for donations, if you like my "work" feel free to press the thanks button down there
DOWNLOAD VERSION 1.3 here
Steps to install
1. Download rom and put on the root of your sdcard
2. Select ROM in Rom manager
3. Select wipe data, cache, dalvik
4. PROFFIT!!!!!
No need to odin back to stock before flashing this and GB bootloaders aren't required
if the glitch kernel freaks out on you... you may need a different leakage version. Source code and updates for glitch kernel, can be found in the following thread ------->http://bit.ly/pNkURn
CHANGELOG:
v1.3- Initial release and port from samsung vibrant, relatively untested
Seems interesting...i'll try it out tonight.
As shall I... I doubt many people here will get the KingKlick reference lol (I'm from way back... G1 days). Great to see you deving for Captivate, biff.
you guys are officially testers. Please let me know any bugs or issues you have. Cappy and Vibrant are basically the same so i think i pulled it off proper, but since i don't have the device, its not possible to know. Once you all confirm its as stable as it should in theory be, i'll push to rom manager and start doing biweekly updates.
Sounds good. I won't be using Glitch though, I'm currently testing a kernel of my own (in my sig). TK-Glitch was the dev of Gitch kernel btw
I will give a try also this night!
So I can flash this with gb bootloader and Samsung rom without the need to go back to froyo stock?
Thanks in advance
deltatyger said:
So I can flash this with gb bootloader and Samsung rom without the need to go back to froyo stock?
Thanks in advance
Click to expand...
Click to collapse
That's what the OP says. If you have issues, then they're most likely caused by your GB bootloaders. Give it a try, worst that can happen is that you have to go stock. (disclaimer: worse can happen if you really, really, really screw up and I'm not responsible)
+1. I have jvp installed. With gb bootloaders. Do I have to-
1. flash to stock eclair
2. flash to stock gb
3. just wipe and flash?
Sent from my cell phone. DUH.
P.s I have never flashed cm or aosp before, so I have just the very basic idea of aosp. Only thing I know is that battery was pretty bad on cm7 due to the phone not being able to get to the deep sleep mode. Could someone please tell me how is it on this?
Sent from my cell phone. DUH.
I already answered this if you want to be safe, go for stock eclair. > flash
I already answered this if you want to be safe, go for stock eclair. > flash
Click to expand...
Click to collapse
Kay.... Thankee. Btw, wat abt the battery issue on cm7? Does this have it?
Sent from my cell phone. DUH.
psycho2097 said:
Kay.... Thankee. Btw, wat abt the battery issue on cm7? Does this have it?
Sent from my cell phone. DUH.
Click to expand...
Click to collapse
Using the glitch kernel fixed battery drains on my vibrant version, hoped using glitch on this rom would achieve the same thing. In theory it should. let me know guys
ytt3r said:
Sounds good. I won't be using Glitch though, I'm currently testing a kernel of my own (in my sig). TK-Glitch was the dev of Gitch kernel btw
Click to expand...
Click to collapse
thanks for the heads up, fixed in all threads. not sure how i missed that
Sent from my SGH-T959 using XDA App
infinitybiff said:
thanks for the heads up, fixed in all threads. not sure how i missed that
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Sure thing. The ROM's been great so far, no issues except for a soft reboot, then when it booted it hard rebooted. Just a one time thing, and I've used the phone plenty since then, so I don't think it's anything to worry about.
Gonna flash here in about 15 minutes...i'll let u know what I think, preety excited for something different!
Error when attempting flash from Apex 9 (JVR):
"Assert failed, get prop....." blah blah blah.... "Status 7"
Hmm
Regards
Smith
EDIT: I modified build.prop to read SGH-i897 instead of GT-i9000 and it works. Well, it's installing as we speak...
EDIT 2: How can I change the band selection?? *#2263# isn't working...
Gonna flash in a couple of hours... Backing up stuff..! Ne more reviews n reports?
Sent from my cell phone. DUH.
I am getting the assert error as well checked build prop. Says sgh-i897 currently running cog 5 v2
Sent from my SAMSUNG-SGH-I897 using XDA App
6/03 : Official topic has been opened
http://forum.xda-developers.com/showthread.php?p=23319217
Get your latest CNA fix there.
This topic is now officially (get it?) dead.
Since no official topic for CNA 1.4.0 has opened, I want to share their latest build.
It has the fixed RIL issues many are looking for.
I do not claim any involvement in the development of the ROM, I'm just a guy who setup a build environment, downloaded the source code and compiled.
As such : treat it as a NIGHTLY, this is NOT an official release so expect no support from me or the devs.
It's just a basic compile so be sure to know EXACTLY what you're doing before flashing.
Code:
ro.build.date=Tue Feb 21 18:26:48 CET 2012
ro.modversion=Codename-Android-(MOD)-1.4.0-GalaxyS
I can recommend flashing another kernel as the original had a tendency to bootloop in the past. But you don't need to listen to me of course.
21/2: http://www.mediafire.com/?rbbh36drchehigt
Edit: Apparently it also has the external SD card fix
26/2: I noticed several changes in their code: mostly kernel, bin, xbin. I compiled again. I'm running the default kernel for now.
http://www.mediafire.com/?81ciaepocyo6wp6
27/2: I've flashed another kernel as the included one caused a dialer wakelock, draining the battery, as well as two reboots.
2/03 : Uploaded another compile
http://www.mediafire.com/?lp54q6x6lkhzf3u
This could be the last one if I read the grapevine correctly.
Click to expand...
Click to collapse
you mean this is the "official" CNA from codenameandroid himself? :-D
You're a legend man. This rom is now perfect!
***Trusty old SGS1 running CNA ICS and Devil kernel 1.1BFS***
Is it DaxIΠFIΠITY ROM or someone else?
This has nothing to do with the Asnet release right? It was stopped because it contained a pay-app.
I want to try this one, but only if I harm nobody's income.
Benjamin
Same procedure as usual?
Which kernel is included here?
1) wipe cache & data/factory reset
2) flash zip
3) reboot phone and wipe again?
Im coming from GB 2.3.3.. cheers
BenjaminX2 said:
This has nothing to do with the Asnet release right? It was stopped because it contained a pay-app.
I want to try this one, but only if I harm nobody's income.
Benjamin
Click to expand...
Click to collapse
You don't have to worry, this is another release.
Mull1s said:
Same procedure as usual?
Which kernel is included here?
Click to expand...
Click to collapse
Yes, don't forget gapps.
Nandroid first !
As far as I know, the kernel is the standard CM9 one.
But you may want to try another ICS rom from in the development section first...
Data/factory reset is necessary in any case?
Wossner said:
Data/factory reset is necessary in any case?
Click to expand...
Click to collapse
It's necessary if you don't come from an other CNA release...
BYTHAWAY Bubble, shouldn't you post this in development section? Or am I wrong?
boris0711 said:
BYTHAWAY Bubble, shouldn't you post this in development section? Or am I wrong?
Click to expand...
Click to collapse
I just compiled someone else's code, so it does not belong there.
How about External storage? Does it fix too?
Pekedel said:
How about External storage? Does it fix too?
Click to expand...
Click to collapse
What do you need to be fixed ?
It is now visible in storage and the music player, is that what you mean ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I upgraded from Dax' release to this one without wipe and everything works fine.
RIL and external SD card issues have been solved.
The only thing that didn't work (didn't show up in the app list) was the Galaxy S Settings (AriesParts.apk), so I copied the one from Dax to /system/app and then it worked.
Is this rom have gb graphic leftovers?
Like orange stuffs,green buttons?
malcho said:
Is this rom have gb graphic leftovers?
Like orange stuffs,green buttons?
Click to expand...
Click to collapse
Like any AOSP ICS, it has. But that can easily be remedied by this.
Bubble-be said:
Like any AOSP ICS, it has. But that can easily be remedied by this.
Click to expand...
Click to collapse
Thanks i will try it.
MrMagic said:
I upgraded from Dax' release to this one without wipe and everything works fine.
RIL and external SD card issues have been solved.
That's answer my question. Thanks. Now I can start flash your rom Bubble-be.
Click to expand...
Click to collapse
Bubble-B
Thanks again for compiling this for us. Everything seems to work including Wi-Fi tethering solo!
Was wondering if you could use this commit to compile a deep idle top-OFF modded framework-Res.
https://github.com/peteralfonso/platform_vendor_pete/commit/a19d2a56ccf07b9ab53a44b7ba5605a1aaffd9e6
Unlike the other ICS ports this one seems to work glitch free. I was using this one on the previous 1.4 build with amazing success but it isn't compatible with this rom... Not 100% sure that commit is in this modded framework sorry.
http://db.tt/PMXOVx4K
***Trusty old SGS1 running CNA ICS and Devil kernel 1.1BFS***
rlorange said:
Bubble-be
Was wondering if you could use this commit to compile a deep idle top-OFF modded framework-Res.
Click to expand...
Click to collapse
I decided to indulge you as it's a friday night, so I edited that xml and ran the compile. Give it a shot, but you know it's mostly placebo right ?
Release 3 -
New Features:
CM File Manager
New Circle Battery Styles
Working Front Camera
New Camera, Gesture Keyboard, Clock, and Wallpapers from yesterdays Nexus 4 dump
Moreeeeee
Quirks:
Navigate to Settings/language and input tap the settings icon next to android keyboard then Show correction suggestions and set that to always hide otherwise the keyboard is unstable
FULL WIPE REQUIRED
Download: cm-JellyTime_R3.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
waydownsouth
gh123man
Kernel source:
https://github.com/randomblame/android_kernel_acer_t20-common/commits/jellytime
I do not include GAPPS in my roms for many good reasons
DOWNLOAD AND FLASH GAPPS FROM HERE:
gapps-jb-20121011-signed.zip/
ICS BOOTLOADER ONLY PLEASE
Reserved
Flashing this Rom
Hi,
Is this ready to.be flashed....and can in flash it using CWM?
Excuse the ignorance in this question...pretty new in flashing the A500
Thanks
randomblame said:
Not working: rotate lock switch
Initial release
http://code.google.com/p/jellytime-iconia/downloads/detail?name=jt-10-20121010-Jellytime-a500.zip&can=2&q=
https://www.google.com/chart?chs=15...121010-Jellytime-a500.zip&chld=L|1&choe=UTF-8
Credits:
waydownsouth
gh123man
Click to expand...
Click to collapse
yes and yes
Flashing this Rom
Thanks Randomblame.
Any particular kernel or just the one that comes with it?
Also, should I full wipe and wipe dalviccache
oh yeah, so do I flash jb-gapps?
randomblame said:
yes and yes
Click to expand...
Click to collapse
Any chance this will work on the A200?
Sent from my BlackBerry Runtime for Android Apps using Tapatalk 2
andrewbat said:
Thanks Randomblame.
Any particular kernel or just the one that comes with it?
Also, should I full wipe and wipe dalviccache
oh yeah, so do I flash jb-gapps?
Click to expand...
Click to collapse
gapps are not included flash the jb gapps package
full wipe recomended but you might get away with just wiping cache/dalvik
the kernel included is mostly just the cm9 kernel modified to build inline with the newer toolchain in cm10 source is here:https://github.com/randomblame/android_kernel_acer_t20-common/commits/2.6.39
supports overclocks up to 1.4ghz for now
ezterry's last kernel was tested to work also
rkennedy01 said:
Any chance this will work on the A200?
Sent from my BlackBerry Runtime for Android Apps using Tapatalk 2
Click to expand...
Click to collapse
no but I know there are a few folks working on a200 so give it time
Uploading new build now
changelog-
fix rotation lock switch
unlock kernel ioscheduler options in settings/performance
update frameworks/base and settings repositories
sync with cyanogenmod
randomblame said:
Uploading new build now
changelog-
fix rotation lock switch
unlock kernel ioscheduler options in settings/performance
update frameworks/base and settings repositories
sync with cyanogenmod
Click to expand...
Click to collapse
Damn, you are quick:highfive: I know you said ezterry's last kernel work with your build, but can I use Godmachine's latest kernel for your build as well?
Thanks
10507 said:
Damn, you are quick:highfive: I know you said ezterry's last kernel work with your build, but can I use Godmachine's latest kernel for your build as well?
Thanks
Click to expand...
Click to collapse
yes his also works
ICS bootloader only or will HC bootloader work?
tgtoys said:
ICS bootloader only or will HC bootloader work?
Click to expand...
Click to collapse
ICS ONLY
Will this work on a501?
grimm18 said:
Will this work on a501?
Click to expand...
Click to collapse
sure but there won't be any wireless data
Flashing this Rom
Is the link above for the new upload?
randomblame said:
Uploading new build now
changelog-
fix rotation lock switch
unlock kernel ioscheduler options in settings/performance
update frameworks/base and settings repositories
sync with cyanogenmod
Click to expand...
Click to collapse
andrewbat said:
Is the link above for the new upload?
Click to expand...
Click to collapse
yes the OP was updated
let me know if you guys find any issues
randomblame said:
yes the OP was updated
let me know if you guys find any issues
Click to expand...
Click to collapse
haha nice I knew it was only a matter of time till you made your way back to the iconia community, good to see that progress is still being made on XDa with jellybean, going to flash this in a bit and will report back with any issues.
if you need any help with testing/debugging before your releases let me know, as I dont need my tablet to be functional for my day to day activites
randomblame said:
yes the OP was updated
let me know if you guys find any issues
Click to expand...
Click to collapse
I am getting an invert(upside down) picture of myself when switching from back camera to front camera.
Sent from my GT-S5570 using Tapatalk 2
10507 said:
I am getting an invert(upside down) picture of myself when switching from back camera to front camera.
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
I'm experiencing the same problem as well, both the camera and video recording from the front cam is inverted, besides that all seems to be working that ive tested so far, I can confirm that hardware rotation switch does work on version 2 as well