okay so i changed my default prop to give me nordic signature and wen i update via seus it gets stuk at 162.5 everytime then gives me download failed
i have deleted my db, and reinstalled seus,
plz help i want 2.1
sounds like the server is over populated
im not certain its the server as it gets stuck in the same place every time not to mention it tells me to check if my battery is fully charged (which it is)
Could try the update service. I was having issues with pc companion. Just started up update service and it ran smoothly. Using 2.1 now
same
i get the same problem. i tried on my vista and win 7 and got the same problem on both os.
Related
now i'm using SE X2, but i got a big problem with SEUS when i wanna update my X2. After i had connected my x2 with SEUS successfully, finished downloading the new rom for X2 through SEUS, then it stoped, it didn't install new rom into my phone with the notice that the services was failed. I tried to reinstall seus but it still didn't work
Anyone helps me plz. thanks!
what windows do you use. is your pc strong enough to run SEUS, minimum specs are listed on the SE site? is your phone battery above 50%. test the usb cable if it works by transfering some data...
whoami9999 said:
now i'm using SE X2, but i got a big problem with SEUS when i wanna update my X2. After i had connected my x2 with SEUS successfully, finished downloading the new rom for X2 through SEUS, then it stoped, it didn't install new rom into my phone with the notice that the services was failed. I tried to reinstall seus but it still didn't work
Anyone helps me plz. thanks!
Click to expand...
Click to collapse
I have 2 PC's: 1 is a tablet laptop from HP (Vista 32bit), 1 is a desktop from Acer (Vista 64bit). The HP is high-usage, all sorts of crap on it. The Acer is low-usage, Media PC.
First few times I tried upgrading firmware (or reloading after a phone-hangup), I had to use the Acer, because every time I tried updating via the HP, ...it would run the progress bar ALL the way through the process to the end (right side of the bar), then give an error stating that the update failed.
A couple weeks ago, I did a reload again, and thought I'd give the HP a shot at it one more time. This time, it failed exactly the same way, but for some reason, I accidentally booted the phone.....and it was fine (did the whole new-setup as expected).
So, moral of the story:
--If the SEUS site isn't working for you, try another PC.
--If you have no other PC and the SEUS site is saying it's not working, don't believe it and try booting your phone anyway.
(I have a feeling that it never updates the bootloader, and that's in a separate memory space. So, you'd probably have to go out of your way to corrupt the phone so bad that you wouldn't be able to hook-up the bootloader with the SEUS site and try again.)
Hi whoami9999,
Just try it once again after stopping / disabling your anti virus and firewall.. And one more thing, don't forget to re-enable it after checking!
Regards,
Sujith
Hi guys
Just installed the new keies software and it said the froyo update was out for my handset (galaxy s) it downloads the update really slow (takes about 20 mins) and then then after it reaches 100% the phone disconnects from the PC and the andriod constuction logo appears on the phone, then shortly after i get an error message from kies telling me the upgrade didnt work and that an emergancy repair is needed..
Ive managed to recover the phone back to working order, but is there anyway i can get this update?
p.s phone was unlocked with the tool from these forums when we had it, if that makes a differance
There are many problems with kies while upgrading the firmware. When you get the error - did you read the error? At times it says something about a "rapi.dll" file missing or any other file, just download that file and it should work.
Best alternative is download the firmware from samfirmware (stock) and flash through odin, it hardly takes any time.
If you want your genuine network supplied firmware i would use the Kies Registry Patcher as this allows you to save the downloaded rom in case of problems .
Failing that as advised the stock rom but that is not what came with the phone its generic non network non branded .
http://forum.xda-developers.com/showthread.php?t=835628&highlight=Kies+Registry+Patcher
jje
xero01uk said:
Hi guys
Just installed the new keies software and it said the froyo update was out for my handset (galaxy s) it downloads the update really slow (takes about 20 mins) and then then after it reaches 100% the phone disconnects from the PC and the andriod constuction logo appears on the phone, then shortly after i get an error message from kies telling me the upgrade didnt work and that an emergancy repair is needed..
Ive managed to recover the phone back to working order, but is there anyway i can get this update?
p.s phone was unlocked with the tool from these forums when we had it, if that makes a differance
Click to expand...
Click to collapse
This is not a big deal, just click on emergency when it appears and kies will proceed, it might say that it will download the firmware again or might use the firmware that is already downloaded.
Can somebody point me on kernel for JVQ supporting Voodoo Color? Thanks.
hy, i just got an samsung galaxy s a few days ago.when i connect it to pc KIES finds a new firware( it's still runing 2.1 update 1),after i press START,i get an error: firmware update has stopped working... cand anyone help? thx in advance
ionelys said:
hy, i just got an samsung galaxy s a few days ago.when i connect it to pc KIES finds a new firware( it's still runing 2.1 update 1),after i press START,i get an error: firmware update has stopped working... cand anyone help? thx in advance
Click to expand...
Click to collapse
More background please:
OS?, Kies version?, are you using the stock USB cable?....etc.
The os is the stock sgs firmware 2.1update 1,i am not using the stock usb cable it's an xperia x10cable,it's that a problem?
Cable wrong also turn off firewall .
jje
I tried with an original cable and still doesn't work.i run on win7 32 bit and the latest version of kies
I also have similar error.
I even reset my device to factory setting, and when I connect, Kies prompts to update the device firmware(as following), however - when I click update, it throws the error "FirmwareUpdate has stopped working"
Current firmware version: PDA:JG4 / PHONE:JG4 / CSC:JG4
(INU)
Latest firmware version: PDA:JP6 / PHONE:JP2 / CSC:JP5
(INU)
My Laptop - windows 7 64 bit.
Kies version: 2.0.0.11014_49
Check if all drivers are installed properly,
Have you rooted your device?
Sent from my Nexus S using XDA Premium App
bumer17 said:
Check if all drivers are installed properly,
Have you rooted your device?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
I reset my device to factory settings - so definitely not rooted any more.
Kies is able to detect the device and suggest the firmware upgrade - only to crash thereafter.
In fact I am able to do everything else - sync, browse etc.
can be something wrong with the pc?i can't understand why is happening this
Fairly common problem with multiple posts on the subject probably even a FAQ .
Seems to be many different reasons why Kies fails for some .
jje
i am running an orange romania SIM,the phone was not bought from them, do you think they could help me with the update?
Which version of Kies are you using? Try getting the latest version and run Kies as Administrator.
yeah same problem with me , My phone is i9003 newly purchased and i installed kies new version, I connected my phone it showing new upgrade and i accept that ... it says downloading please wait, once everything done it shows me error
my os is windows 7 64 bit
kies version is 2.0011014_49
i tried all kind of stuff,runding in admin,latest version,compatibility mide tc, nothing works... i really don't get it...
ionelys said:
i tried all kind of stuff,runding in admin,latest version,compatibility mide tc, nothing works... i really don't get it...
Click to expand...
Click to collapse
Your solution is there:
http://forum.xda-developers.com/showthread.php?t=997974
do not forget to thank
i tried this solution too,now it's stops somewhere at collecting update parts or something like that,but the program really stops, i also get that error: firmware update has stopped working...
Phone supplier or service centre is where i would go .
jje
i also had the same problem. i tried on 3 diff laptops but same thing. but jst keep on trying...i think after 30-40 tries..luck was on my side...and it worked.
tats how kies is
i found the "solution".kies has some compatibility issues with win7,i tried it on a PC that was runing xp and worked great,thx everyone for help
I haven't updated my phone for quite a while, the last update I did was a camera update ages ago.
A few weeks ago I tried to do a firmware update and it failed, so I let it be, but now I really want to update it because it's bugging me.
I just updated Kies.
The current firmware version is: PDA:KE7 / PHONE:KE4 / CSC:KD1 (XEU)
It wants to update me to: :KF3 / :KE7 / KD1 (XEU)
I have no idea what that means, by the way.
I hit next, and yes, and choose not to backup, and tick that box, and then it loses the connection and tells me again 'OH HAI! You can update your phone!' and I'm stuck in a loop.
I'm on Windows 7 on a laptop, I'm in Australia, I bought my phone pretty early on, from the UK. Have not done (and see no reason to do) any rooting or other stuff like that.
Please help?
Make sure the Drivers are correctly installed and you don't have a MTP Error when you connect.
Regards.
How do I know if they're correctly installed or not?
How do know if I have an MTP error? Nothing has come to me saying 'I'm an MTP error!' do I have to go looking for it?
Just Uninstall them from CP and Reinstall them. MTP device error pops up when you connect your device, if you don't have one I guess you are OK with that part.
Regards.
Kies suck! Install stock 2.3.4 jvr ot doesn't requires root amd all that stuff!
Sent from my GT-I9000 using XDA Premium App
Kies seems to have major problem with laptops .
jje
Make sure your phone is fully charged - I mean 100%.
I've had Kies flake out on me like that (with no error message or anything) because the phone's battery was only at like 97%.
Very annoying
So, I was eagered to update my phone with the new SFR-FR update, got it all set.
It started all with the 8018001E error I got when trying to update to this update, so I thought I would just leave it, and I changed my carrier to 000-88.
Then I saw there was another method to update, with the WP7 Cab Sender and the update as a .cab file. Tried this one out when I was still being debranded (000-88), this time the installation failed with error 80180011.
Then (oh dear), I downloaded the Samsung Update Tool from the Omnia 7 support page, and installed a update (or something). Now I tried the official way again (changing carrier to SFR-FR, then Zune update), this time I got the 80180097 error! Yes its raining errors today.
After the Samsung Update Tool thingy, my phone couldn't connect to any network, or sometimes it's connecting to my KPN network for a few moments.
I am tired of this all, all I wanted was to install a few OEM updates, now I end up with this. Can anyone help me out? Really appreciated!