Database Users

Voice Command only white Display

Hi @ all
MDA per/Qtek 9000 Voice Command indicates(signalises) in the contacts only white display, however, everything goes the contacts are also announced and he acts to phone calls they are not even indicated(signalised.
Danke an alle

Upgrade
Have your tried the recent release upgrade (version 1.6)? It even works when the Universal is closed.

Schau mal hier:
http://www.ppc-welt.info/community/s...=outres.96.dll
Mit der outres.96.dll geht das wieder

extrem_MDA3_ler said:
Schau mal hier:
http://www.ppc-welt.info/community/s...=outres.96.dll
Mit der outres.96.dll geht das wieder
Click to expand...
Click to collapse
Dude/Dudette..... English please. I assume you are saying to download outres.96.dll is the fix, correct, but only if you knew that was the answer in the first place, not to new comers researching this.

Error 0x80072f78 (GERMAN)

Hallo Zusammen,
ich habe folgendes Problem. Ich habe mir gestern das B&B 4.1 ROM aufgespielt. Läuft alles auch wunderbar bis auf meine O2 WAP FLAT.
Habe alle Proxy eingestellt sowie auch in der Reg AllowLSP sowie UAProf laut den Anleitungen in diversen Foren geändert. NICHTS tut sich.
Mit dem alten Rom von O2 lief alles problemlos. Ich kann aber per USB Verbindung mit dem Handy surfen nur nicht über GPRS… dann kommt der Fehler:
0x80072f78
Zugangspunkt wap.viaginterkom.de
Proxy: 195.182.114.52
Was kann ich noch machen?

i cant help you but i can transalte to english so others might find a solution:
(ich kann dir nicht helfen, aber ich kann dein post nach englisch übersetzen)
he wrote:
i have following problem: yesterday, i flashed B&B 4.1 ROM to my device. everything is working great except for my O2 WAP FLAT.
i set all proxies and also set AllowLSP and UAProf in registry according to manuals i found in various forums. NOTHING happens.
with the old O2 ROM everything worked without problems. I can access the internet using a USB connection but not via GPRS...if i try i get this error: 0x80072f78
access point wap.viaginterkom.de
proxy: 195.182.114.52
what else can i do?

Thx...
But nothing work's.....
DAMM IT

soardiac said:
i cant help you but i can transalte to english so others might find a solution:
(ich kann dir nicht helfen, aber ich kann dein post nach englisch übersetzen)
he wrote:
i have following problem: yesterday, i flashed B&B 4.1 ROM to my device. everything is working great except for my O2 WAP FLAT.
i set all proxies and also set AllowLSP and UAProf in registry according to manuals i found in various forums. NOTHING happens.
with the old O2 ROM everything worked without problems. I can access the internet using a USB connection but not via GPRS...if i try i get this error: 0x80072f78
access point wap.viaginterkom.de
proxy: 195.182.114.52
what else can i do?
Click to expand...
Click to collapse
1. Open Internet Explorer.
2. On the Tools menu, click Internet Options.
3. Click the Connections tab, and then click LAN Settings.
4. In the Local Area Network (LAN) Settings dialog box, click to select the Automatically detect settings check box, and then click OK.
5. Quit Internet Explorer.
6. Click Start, click Run, type cmd, and then click OK.
7. Type the following commands. Press ENTER after each command.
a. proxycfg -d
b. net stop wuauserv
c. net start wuauserv
d. exit

Problems with roms....

Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough

Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..

Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??

oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.

Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.

Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now

You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?

mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work

Hast du Skype ?
English:
Do you have Skype?

Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !

mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.

Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?

mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..

I think it's your Radio-Version that make problems. To solve the problem flash this

sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...

It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!

Problem HD2 MultiSim t-mobile

Hey guys i hava a problem with my two SimCards.
For Switching the Messaging-Funktions i have to type *222#
but if i do so my Phone shows:
"
Der Wahlvorgang kann nicht abgeschlossen werden. Sie haben u.U. keinen Empfang oder die Rufnummer ist ungültig. Überprüfen Sie die Nummer, und versuchen Sie es erneut.
"
Are there any ideas?
ROM: HTC GER 1.66
If you need other infos let me know!
Upgrading the ROM & Hardreseting is no option

boehmhd2 said:
Hey guys i hava a problem with my two SimCards.
For Switching the Messaging-Funktions i have to type *222#
but if i do so my Phone shows:
"
Der Wahlvorgang kann nicht abgeschlossen werden. Sie haben u.U. keinen Empfang oder die Rufnummer ist ungültig. Überprüfen Sie die Nummer, und versuchen Sie es erneut.
"
Are there any ideas?
ROM: HTC GER 1.66
If you need other infos let me know!
Upgrading the ROM & Hardreseting is no option
Click to expand...
Click to collapse
Are you saying you have two SIM cards in the phone? That would mean you are using a clone, not an HD2 - and if so, no one is going to be able to help you on these forums. There is no telling what hardware or software is being used in these clone devices.

first simcard >> HTC HD2
second simcard >> iPhone
multiSim, one provider, one number, one bill, up to three simcards
both phones get the calls, but only one is activated for messaging (SMS, MMS)
to activate the messaging on a phone (or simcard) you have to dail: *222#
at the moment the iPhone is activated.
and if i try to activate the HD2 i get the error postet above.
sure i can swap the simcards but that is not the sense of multisim!!
i hope this brought light into the darkness ????

boehmhd2 said:
first simcard >> HTC HD2
second simcard >> iPhone
multiSim, one provider, one number, one bill, up to three simcards
both phones get the calls, but only one is activated for messaging (SMS, MMS)
to activate the messaging on a phone (or simcard) you have to dail: *222#
at the moment the iPhone is activated.
and if i try to activate the HD2 i get the error postet above.
sure i can swap the simcards but that is not the sense of multisim!!
i hope this brought light into the darkness ????
Click to expand...
Click to collapse
Nope, still in the dark. They don't have this kind of service here in the US. Sorry I couldn't be of more assistance.

Need help translating from german

Hi,
I'm trying to use "basebandswitcher" an App for switching bands for the Defy.
I have some errors that I couldn't find solution for anywhere, but a post on a german forum that seems to solve it.
Problem is google translate, and other online translators, do a pretty bad job translating it.
Anyhow I hope some nice German member could help with translating this small quote:
Habe ich gestern bei meinem Handy auch gesehen das diese Meldung auftaucht.
- Wenn Du dem auf Default zurücksetzt nimmt er das von Einsteino vorgegebene Band wieder aktiv (meine 2.21). Bekommst aber beim nächsten mal die selbe Meldung. Aber das zurücksetzen auf DEFAULT geht damit.
- Wenn Du ein anderes Band auswählst und bei dem beschriebenen Fehlerfensterchen "later" anklickst, wird Deine Wahl übernommen.
An sich, finde ich, ein Schönheitsfehler. Das zurücksetzen auf Default geht, die Wahl eines anderen Bandes auch. Nur eben mit kleinem Fenster.
Click to expand...
Click to collapse
Thanks!

shloms said:
Hi,
I'm trying to use "basebandswitcher" an App for switching bands for the Defy.
I have some errors that I couldn't find solution for anywhere, but a post on a german forum that seems to solve it.
Problem is google translate, and other online translators, do a pretty bad job translating it.
Anyhow I hope some nice German member could help with translating this small quote:
Thanks!
Click to expand...
Click to collapse
"I had the same message on my phone yesterday
-if you go back to default it will take the band given by Einsteino. But you will get the same message next time but going back to default works
-if you take a diffrent band and klick "later" in the errorwindow it works"

Thank you very much, loehry
Human translations beats Google