I was able to install ROM without issues. The "R" icon is displayed and under the About phone, network option, roaming is now indicated. What settings will stop the roaming? I did compare settings with stock aria setup and liberated_aria_FR006_signed ROM and the settings are the same but not the results. Any help would be appreciated.
Thanks
cougar4v said:
I was able to install ROM without issues. The "R" icon is displayed and under the About phone, network option, roaming is now indicated. What settings will stop the roaming? I did compare settings with stock aria setup and liberated_aria_FR006_signed ROM and the settings are the same but not the results. Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Are you saying that before this you weren't roaming? The only way to disable roaming so to speak is to move to an area where you have coverage
Sent From My HTC Aria Using XDA App
Roaming issue
yeah, the "R" was not there prior to installing this ROM. I restored the nandroid original rom using clockwork and then re-installed this rom via clockwork and the "R" activates as soon as the phone boots into the new rom.
cougar4v said:
yeah, the "R" was not there prior to installing this ROM. I restored the nandroid original rom using clockwork and then re-installed this rom via clockwork and the "R" activates as soon as the phone boots into the new rom.
Click to expand...
Click to collapse
Have you tried any other ROMs (cm6(.1)) to see it you get the same result?
Sent From My HTC Aria Using XDA App
Roam'n issue
I just installed cyanogenmod 6.0.2.1 and gapps. The "R" also shows up in this ROM and it also indicates roaming in the "About phone" option. What is odd is that the stock rom never indicated "R" or roaming...so...what...the...fudge...
the big question then is, are you roaming?
Do you remember what network your are connected before? If you are roaming, the network name should be changed, it should show in lock screen and status bar.
Maybe your phone network is not in the config file?
The real question is, why was a new thread created for this and not just posted in the existing liberated fr thread...
Sent from my Liberty using XDA App
BelacNongaw said:
The real question is, why was a new thread created for this and not just posted in the existing liberated fr thread...
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Now that is a good question. It probably deserves to be asked in a new thread. I'm serious why not everyone else are adding threads for just stupid questions. Why not open a new thread for a very important one?
tleung11 said:
Do you remember what network your are connected before? If you are roaming, the network name should be changed, it should show in lock screen and status bar.
Maybe your phone network is not in the config file?
Click to expand...
Click to collapse
AT&T, and that is what is displayed on the lock screen, dunno which status bar you mean, still getting used to this mod. What config file do you mean?
Thread moved to General.
Related
Can't get 3G/2G/G/E or any other network to work it only displays the network statusbar. APN's are correct and active but it still wont work.
Help?
Vodafone DE HTC Magic.
velotown said:
Can't get 3G/2G/G/E or any other network to work it only displays the network statusbar. APN's are correct and active but it still wont work.
Help?
Vodafone DE HTC Magic.
Click to expand...
Click to collapse
If you're using a hero rom then double check the apn seems like many hero roms put space after the dot cause it acts like a text field instead of adress field!
Nah,
Had cyanogen 4.0.4 and neither 3g nor wifi worked so i did a nand backup but it still didnt worked :S recovery is cyanogens 1.4 and i already asked in the rom thread but no answer so far ~~.
I really need help getting mms to with on my droid x, I have eveeything working, but mms? Any help will be most welcome.
Sent from my SGH-T959 using XDA App
I'm no expert but have you tried a third party app?
atmancloud said:
I really need help getting mms to with on my droid x, I have eveeything working, but mms? Any help will be most welcome.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
What ROM are you using?
The new fission rom on tbe droid x? I got every thing else working but mms.
Sent from my SGH-T959 using XDA App
atmancloud said:
The new fission rom on tbe droid x? I got every thing else working but mms.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I use Rumm rx. That's the only rom that works for,me..try Rumm and use the metro flash by token
Sent from my DROIDX using XDA App
Thanks for the info, but may I get a link for the metro flash by token?
Sent from my SGH-T959 using XDA App
atmancloud said:
Thanks for the info, but may I get a link for the metro flash by token?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
When I get to my computer I can, but if you go to the eris forum under development there's a link there like on the second page
Sent from my DROIDX using XDA App
Thanks a lot I'll get on it
P.O.I Alex Rubio, Light Swich
atmancloud said:
Thanks a lot I'll get on it
P.O.I Alex Rubio, Light Swich
Click to expand...
Click to collapse
Ok.keep me updated..I'm on cricket network but ill try and help as much as I can.
Sent from my DROIDX using XDA App
Okay thanks
P.O.I Alex Rubio, Light Swich
atmancloud said:
Okay thanks
P.O.I Alex Rubio, Light Swich
Click to expand...
Click to collapse
What system version are you on?
Sent from my DROIDX using XDA App
System version I left my phone at work how do I check that
P.O.I Alex Rubio, Light Swich
atmancloud said:
System version I left my phone at work how do I check that
P.O.I Alex Rubio, Light Swich
Click to expand...
Click to collapse
Settings and about phone. I am just wondering because Rumm is 2.3.320 and I think Fission is 2.3.340. If you want try this before you try Rumm. Backup current ROM and then run the Metro Flash from here http://forum.xda-developers.com/showthread.php?t=730289. Also make sure your APN settings are correct.
Thanks a lot I found that I can have everything working with the stock Rom. Using root explorer to push the u2nl and upstart.sh. it will only send mms using 3 mags pixel.
Sent from my ADR6300 using XDA App
atmancloud said:
Thanks a lot I found that I can have everything working with the stock Rom. Using root explorer to push the u2nl and upstart.sh. it will only send mms using 3 mags pixel.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
That's how I had my X the first tine and then I flashed Rumm Rx and love it. Im glad you have it working..
Sent from my DROIDX
Help with mms!!!
Ok, I've followed everything step by step in order to make my stock GB DX work on Metro instead of VZW. All went perfectly until the last part. Flashing MetrOFF 1.2 (GB). I have put the file on my sd card and tried running it in recovery mode per instructions, and it seems to start, but then fails out saying that it's not signed and aborts. Does anyone know how to make it work? I like the stock ROM and took out most of the bloatware that I didn't want. The rest is perfect imo, except the MMS part. I don't have service yet because I want the phone working %100 before paying another company money for service. Pease help!!?
Electriphead said:
Ok, I've followed everything step by step in order to make my stock GB DX work on Metro instead of VZW. All went perfectly until the last part. Flashing MetrOFF 1.2 (GB). I have put the file on my sd card and tried running it in recovery mode per instructions, and it seems to start, but then fails out saying that it's not signed and aborts. Does anyone know how to make it work? I like the stock ROM and took out most of the bloatware that I didn't want. The rest is perfect imo, except the MMS part. I don't have service yet because I want the phone working %100 before paying another company money for service. Pease help!!?
Click to expand...
Click to collapse
Try using the old version of CWM recovery.
Sent from my DROIDX using XDA App
ok.. CWM Recovery. Sorry, I'm tired and I don't quite follow. I know I didn't say which instructions I followed, but I never had to dl another recovery prog to get this far. I did get the instructions from this forum and followed them to a tee. After all of that, I ran across another thread that showed me how to mod settings through ##7764726 with the code 000000 (Well, it led me there and I figured out alot just by looking around.), and then another prog allowed me to set the APN. Anyway, I wonder if between that and other forum instructions, did I bypass having to use the MetrOFF mod? I'd still like to because all of the other instructions there were right on the money and don't want to find that I missed something going through a back door. TY for the info...
Also (a bit off topic), I need a prog that will allow me to actively switch between apps (ie. Web, game, IM service, sms/mms, e-mail, etc) w/o having to back out completely or restart the app or navigate from the home screen to that app every time. Kinda like Task Manager in Windows Mobile 6.5??? I'm sure I'll have to designate a shortcut to that app on the home screen (wish I could make a button do it, like the back button ), but it would make "fast switching" a hell of alot faster and easier. TY big time for any help here!!!
Going further down the rabbit hole... Why isn't it told that in order to install CWM you need to get something from Java in order to undersrtand the SDK file of Android and then from there (God willing) understand wtf you're doing to install CWM on the DroidX? It seems pretty clear that this is the process to get an app from the AndroidMarket to work on this phone. Yes, for me it's worth the effort, but for a noob with no patients that just wants the better to be best, I think it should be an added must in all instructionals! Even my tech savvy self (still learning all things android) is perplexed and almost confused at all of this. I hope I help someone out there with all the same frustrations...
OK. I have since went round and round like most of us do to get things working correctly. I have had success in getting Bootstrap on my phone via .apk on my sd card (not the way I expected to after much hw and following guides), but even now that I have successfully installed CWM, I still can't run the MetrOFF zip file. I get an error stating that:
"Amend scripting was depreciated by Google in Android 1.5.
It was Necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery. Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages."
I then found the Metroff 1.3 [Edify] version that was also meant to remove a roaming indicator, and it was also aborted because of a yet unknown (to me) error. Again, I ask, Please HELP?
No older CWM...
@ Bigshotrob22
Ok, I finally figured out why you said to use an older version of CWM. Problem that I have now, is that I can't find on older version that works. I found 3.0.something and tried it, but it only booted to a black screen everytime I tried to use it at all, so I went back to 5.0.whatever for now. Can Anyone please post a link to an older version that will work on DroidX?
Electriphead said:
@ Bigshotrob22
Ok, I finally figured out why you said to use an older version of CWM. Problem that I have now, is that I can't find on older version that works. I found 3.0.something and tried it, but it only booted to a black screen everytime I tried to use it at all, so I went back to 5.0.whatever for now. Can Anyone please post a link to an older version that will work on DroidX?
Click to expand...
Click to collapse
In Rom Manager at the bottom there's "All Clockwork recoveries" download the version 2 sumthin and try that
Sent from my DROIDX using XDA App
Every pure sense rom I flash, I only get hsdpa connections when I first flash. I get the "h" icon and I also get about 5-8mbps download. Now, after I reboot, I only get the "3g" icon, and about 1-2mbps. I've tried every apn setting out there, to no avail. Then when I restore stock rom, no hsdpa (in signal strength widget) until I reboot after restoring. I've seen a couple of other posts like this with no answers so decided to try q&a. Any info would be greatly appreciated. And this was with using the kernal that came with the rom, and faux's kernals, both cfs, and bfs 0.9.8, and 1.0.0 rc1&2. Stumped.
Edit: stock based roms have no problem connecting to hsdpa after a reboot.
Sent from my HTC Glacier using XDA App
You should try formatting system data cache boot dalvik-cache amd factory data reset then flash the rom. See how it works after that and we can go from there.
Sent from my HTC Glacier using XDA Premium App
dacquesta1 said:
You should try formatting system data cache boot dalvik-cache amd factory data reset then flash the rom. See how it works after that and we can go from there.
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
I agree. I am running a sense ROM and I have no problems. Now one thing is the stock ROM may say you are in H range and you truly aren't. A lot of the ROM and kernel cooks have fixed this. So my question is do you get H at all or its just missing from places you had it before?
Sent from my beautiful mind
I get an "h" at first, with download speeds of 4-7mbps, then after reboot I get only the "3g" icon. Download then drops to maybe 1.5-2.5mbps. I've tried orange sense, evil-d's, and gorillaSense. Royal thunder never showed an "h".
Edit: I use the signal strength widget to double check what network I am on, along with ,menu,about phone, network
Sent from my HTC Glacier using XDA App
Hey guys can someone help me out!Every ICS ROM i tried have Extremely slow data speed.Im currently on Zipnet's ROM.This happen is EVERY ICS ROM!On GB i have normal data speed.Also radio is same in this and GB rom.What should i do?I did nothing wrong when flashing.Watch this video,
http://youtu.be/w81AnKDBn8s
PS
I flashed latest radio and still have the problem.Guys,SpeedTest always giving me "0" downloading speed no!I went back to GB until i get an answer.Here are Screen Shots of Speedtest on ICS and GB(same radio).Tell me what to do please..
PROBLEM SLOVED AFTER FLASHING SENSE ROM!Today i flashed this "SmartBeat Venomous | Sense
4A | Android 4.0.3" ROM and i got normal data speed.But i want AOSP ROM.What should i do?
TIA
crazykas said:
Hey guys can someone help me out!Every ICS ROM i tried have Extremely slow data speed.Im currently on Zipnet's ROM.This happen is EVERY ICS ROM!On GB i have normal data speed.Also radio is same in this and GB rom.What should i do?I did nothing wrong when flashing.Watch this video,
http://youtu.be/w81AnKDBn8s
Click to expand...
Click to collapse
You could try to adjust the apn settings and see if that changes anything for you
Sent from my HTC Glacier using xda premium
It also might be your radio, try flashing different ones and make sure you have good coverage
Sent from my MyTouch 4g using XDA App
I had the same problem, but I set my APN up for simple and also flashed my radio to the latest available and it is working tons better now.
neonshadow said:
I had the same problem, but I set my APN up for simple and also flashed my radio to the latest available and it is working tons better now.
Click to expand...
Click to collapse
Set your APN for simple mean what?I think this could not be an APN issue,because if i have entered wrong APN settings,i will not able to get connect to intenet.I can surf internet,no.Problem is it is extremely slower on every ICS ROM i flashed...Ah.My carrier is Airtel.
I have simple mobile and having same problems.
neonshadow said:
I had the same problem, but I set my APN up for simple and also flashed my radio to the latest available and it is working tons better now.
Click to expand...
Click to collapse
I have also simple mobile and having same problems, can you please, post what you did to fixed, or at least point me on the right direction. thanks
I use this and it has fixed my data speed every time.
1. Download the 3g turbocharger from here: http://forum.xda-developers.com/attachment.php?attachmentid=979490&d=1333415041
2. If you don't have script manager, get it from the play store.
3. Navigate to the 3g turbocharger download.
4. Click it and select run as root (icon is the superuser logo)
5. Run the script and select your speed settings. Reboot twice to ensure the build.prop tweak works.
6. Verify your data speeds with speed test and test each setting to find fastest speed.
Hope this helps you as well.
Sent from my HTC Glacier using XDA
Please can someone help me!I also wanna flash AOSP ICS ROMs....please help me....
Seems this is only from me.Scince this us only happing to me,no one gonna fix that because they have not that problem.I understood.I tried everything i know.I aslo tried by editing build.prop..But nothing changed.I will hang on GB untill SENSE ICS ROMs gonna stable,because SENSE is the slove for this..
So I just installed tytungs cm10 on m ygfs hd2 via nativesd with wm6.5 and mobile data is not working I tried many combinations with data and WiFi tethering,... something that's also strange is that thephone shows the roaming sign at the signal bars? How can I fix this? Thanks guys
Edit: It seems that the "R" on the roaming bars doesnt have a connection with the mobile data not working since switching SIM cards removed the roaming "R" but mobile data still wasn't working.
So I still don't have a working data connection not even a 3G or H icon in the notification bar in Android on native SD in wm 6.5 all is working...
Thing I tried:
3 Roms: Jelly Belly, Nexus hd2 Jelly Bean, myMIUI GingerBread, all without working data connection.
HSPL 2.08 and 3.03
Current info:
Radio: 2.15.50.14
HSPL 3.03
Maybe you installed PPP instead of RMNET?
Check your APN settings as well as the network.
Thanks for the answer! I tried with rmnet and ppp with the same results. Networking and apn settings are alright I also can write SMS and call people without problems. The only thing not working is mobile data and it displays the roaming 'R' on the signal bars...
Sent from my MB860 using xda app-developers app
Maybe I should add that it doesn't even show an H or 3G in the notification bar just nothing...
Sent from my MB860 using xda app-developers app
Since there is an "R", maybe you should check "use data when roaming" .. But why is it showing "R" ? You aren't roaming, are you?
Ok I found out why it didnt work... I tried flashing back to HSPL 3.03 from 2.08 and now it works but I have no idea why... anyways thanks for your help
Kiwimoose said:
Ok I found out why it didnt work... I tried flashing back to HSPL 3.03 from 2.08 and now it works but I have no idea why... anyways thanks for your help
Click to expand...
Click to collapse
Ok it doesnt work XD sorry for the confusion but earlier mobile data also wasnt working on winmobile and flashing back to HSPL 3.03 fixed it for winmobile so I thought it would fix it for android, too but it didnt... The Roms I tried are NexusHD2-Jelly Bean and Jelly Belly both ROMs think Im roaming when I'm not and both can't create a mobile data connection (not even 3G or H signs in notification bar...) in Winmobile 6.5 mobile data works as it should... So if anyone has any idea how to fix this please help me!!!
Did you check the "Data Roaming" ?
Marvlesz said:
Did you check the "Data Roaming" ?
Click to expand...
Click to collapse
Yes I checked data Roaming and even national roaming just to be sure... I just tried it with a different SIM card and now the Roaming "R" vanished but everything else is still the same so maybe the "R" doesnt have any connection to the mobile data at all?... and thank you for your quick reply
So its not a Jelly Bean problem too I tried myMIUI (Gingerbread) and it has the same problem...
Maybe a problem with the radio?
Radio is 2.15.50.14
I believe it is the international hd2.
Kiwimoose said:
So its not a Jelly Bean problem too I tried myMIUI (Gingerbread) and it has the same problem...
Maybe a problem with the radio?
Radio is 2.15.50.14
I believe it is the international hd2.
Click to expand...
Click to collapse
Sorry for triple posting but i just want to keep everyone up to date on my own progress:
I tried the following trick from this thread: http://forum.xda-developers.com/showthread.php?t=766188
1- Dial *#*#4636#*#* you will have a menu of testing
2- open Phone information you will see all network info...
3- press on (set preferred network type..
4- change to GSM AUTO .... and done....
Click to expand...
Click to collapse
After applying these changes I get a "3G" sign in notification bar but still no connection...
I then set the DNS in build.prop to this:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
which sadly didn't work either...so if anyone has any idea please help!!!
Same problem to me. The mobile data still works if I am using win mobile or even SDCard ROM (ICS NexusHD). But using nativesd ROMs, it does not work.
Someone please help us.
I got it working after flashing the Rom over and over again with full wipe ppp and adding the build.prop lines.
Have you added DNS to build.prop:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Yes exactly
I have added too but it does not work. I found that if using sdcard NexusHD, network type is HSDAP:9 (able to connect) but using any NativeSD ROM, network type is HSDAP:8 (unable to connect). Is it the problem? Anyone can help me?
So my girlfriend pulled the sd card out while the phone was running and after turning the phone on again mobile data didn't work again... I tried doing everything the same way as before but it isn't working again... Does anyone actually know what causes this? Since it's working flawlessly on wm6.5 it should be an android specific bug no? This is quite frustrating since I somehow got it to work before and now just because of such a little mistake it's gone XD
Sent from my MB860 using xda app-developers app
Same problem - no data in nativesd android
I too facing same problem.
I have Magdlr with HSPL 2.08 something with radio 2.15. something
I have win 6.5 in nand and android in sdcard using rmnet
Data connection is flawless in win6.5
But there is no data connection E or 3G or H symbol even in any of the androids. I tried NexusHD JB, Slim rom JB, Touchwizmod JB, Pixeldroid JB. Data never works in any android SDCARD installation.
Any fix please. Thanks. I wanna use whatsapp in android from sdcard
thanks
sathya80 said:
I too facing same problem.
I have Magdlr with HSPL 2.08 something with radio 2.15. something
I have win 6.5 in nand and android in sdcard using rmnet
Data connection is flawless in win6.5
But there is no data connection E or 3G or H symbol even in any of the androids. I tried NexusHD JB, Slim rom JB, Touchwizmod JB, Pixeldroid JB. Data never works in any android SDCARD installation.
Any fix please. Thanks. I wanna use whatsapp in android from sdcard
thanks
Click to expand...
Click to collapse
Same problem here... for a year, can't find the solution.
Tried everything what is written about that problem... nothing
Any help would be deeply appreciated.
F.
Flukturr said:
Same problem here... for a year, can't find the solution.
Tried everything what is written about that problem... nothing
Any help would be deeply appreciated.
F.
Click to expand...
Click to collapse
Hey mobile data is working with "Touchwiz mod V3.0 4.2.2 JB" rom. I made a clean install with PPP connection instead of RMNet. But for me battery drain is very bad in Touchwiz mod. so luking for a good rom with better battery life.
cheers