Using the M3100 with the itech clip S35 Headset
firstly i've been using the fit4cat tweaker which has an A2DP quality improvememt tweak - unfortunately the tweak makes the quality worse so i've tuned it off and the music quality is not too bad when playing through my car stereo. However, I need to try some decent headphnes with the unit because the ones supplied sound very tinny!
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Thirdly, I have the S35 outputting through my car stereo. When people are calling me they can hear an echo (of themselves speaking as the sound comes out through the car speakers). There is some sort of delay i suppose but this is very annoying. I'm not sure why its happening because when I tried the headset using my Sony Ericsson W800i there was no such echo!
therfore, is the echo problem an A2DP thing (as the w800i does not support it and this works ok) or is it a m3100 thing? To test this I could turn off A2DP and ry the headset again - is this possible?
any suggestions appreciated
I have the Jabra BT620s headphones and I have indentical problems.
After install all works well but as soon as you disconnect media player just plays via the phone speaker
at least you guys get it to work once. WMP never plays through my iPAQ bluetooth headset. AVRCP controls work fine though. TCPMP plays fine through the bluetooth headset as long as I pair it up before I execute TCPMP. This is exactly how it worked with my 8125.
The WMP issue is very strange and is likely yet another example of the lack of QA testing in the A2DP portion of the TyTN's implementation. I would expect that these issues will all be fixed in a subsequent TyTN ROM update.
I'm getting on ok with this
quality is pretty good both using the headset with my own sony ear buds. Vast improvement over the itech supplied ear buds.
A2DP - no skipping during normal playback and it works well - quality is not an issue through the car stereo either - not bad at all . I've even been listening to music over A2DP and running sat nav using a GPS BT receiver. A slight pause in music when GPS connects but then all runs well.
My only 2 gripes are:-
1. When you disconnect or go out of range of the headset, it reconnect perfectly with the phone application. This isn't the case with the wireless stereo. I have to enter BT settings, uncheck the wireless stereo setting, save then recheck the setting before it reconnects. Slightly annoying but accesptable (for now)
2. the echo using the headset through my car stereo. People calling me can hear themselves again (about a 0.5 second delay) through the car speakers! Just to repeat my earlier post, this does not happen with my W800i. not sure if its an A2DP problem or something else.
Similarly here, I don't seem to be able to make A2DP (and the handsfree profile, for that matter) work.
Using HTC and an Itech clip, I am able to pair the "wireless stereo" and then play music for some 10 seconds on the GS Player, after which the Wireless Stereo symbol disappears from the top bar and the connection is interrupted. I actually believe that the Itech clip is 'shut off', as I have to turn it on again.
When I try to reconnect the headset, it just won't work and the whole machine is slowed down. Only a soft reset helps.
I hope this is a ROM problem (and not mine) and it'll be fixed soon...
WMP and the Itech clip work fine for me, with the current German ROM.
a2dp issues w/th Hermes
With the CHT9000 WWE rom I had the wireless stereo drop off after about 1 minute, then I would have to reconnect. I flashed to the other dopod WWE ROM (latest) and the problem is gone....sound is comparable to my prophet. Reg tweaks suggested in other forums definetely make the sound quality worse for either ROM version. I think further updated ROM's will improve A2DP reliability (or someone may find a reg hack)...as with the prophet A2DP it just takes time.
Hi guys, I've got the vario ii and the Sony Ericsson HBH-610.
I can add the headset fine and make calls through it, but I don't know how to get the music in wmp to play through it.
If anyone has a few mins spare and could explain it for me I would be really grateful
Headsets..HBH 610...
With my CHT 9000 I use an OMIZ 5660...works great for calls and wireless stereo. I don't have any other headset to compare it to (since I only have used this brand)....I believe that if your "options" do not list wireless stereo then you can't use the A2DP function on your device, at least as it is designed to be used.
I'm not aware of a one-piece headset that supports A2DP that is available (all should have either 2 headphones or two wired ear plugs)..
THE ONLY WAY, I FIND :
I have a 590A Plantronics Bluetooth HeadSet
You must refresh Services of your iTech or your Plantronics !
Go Parameters, Bluetooth, Select your Headset, Refresh.
Then reselect services and Save !
Each time you lost the link (Bluetooth turn off or ...) you will have to Refresh,reselect and Save !
I am searching for a Solve but not find another !
I forget something else !
It is the same thing with my Bluetooth GPS (GNS).
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
So far A2DP has worked fine for me with my Nokia HS-12W. I have applied some registry settings and optimised my SD card and so far it has played with hardly a skip. Definitely better than my previous BA with WM5.
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
hutton118 said:
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
Click to expand...
Click to collapse
This is probably headset dependent because with my Nokia HS-12W if i need to reconnect i just press the Audio button and it re-establishes the A2DP connection. No going to BT settings at all.
Interesting, can you just confirm what you mean by the Audio button. Is that just hitting 'Play' in WMP?
Thanks
No, the Nokia has a Music key (not Audio, my mistake) which switches from A2DP to the built-in radio. So if i have lost the BT connection pushing the Music key to select the Audio player will re-establish the connection and music is streamed to the headset. You will see the A2DP icon on the today screen when it has connected and get the chime in the headset.
Ok, thanks for that.
Just one last point, if the connection is lost while music is streaming, does the audio switch to the phone speaker instead??
My problem is I'll be listening to music on the subway then or some reason I'll loose the connection (interferance, low battery...whatever) and immediately music starts coming out the speaker, much to my embarrassment!
Thanks again!
my bluetooth will pair with phones and headsets but will not connect for file transfer
Might just be me (but I doubt it)...I haven't seen an Android build yet that had OBEX. Check the changelog and feature list for your particular upgrade and see if that was offered.
I have had issues with the bluetooth as well. I bought a Motorola s705 for streaming music/speakerphone in my car. For some reason, the sound quality is CRAP and it 'hiccups' every 30 seconds or so. I tried the same device with my wife's t-mobile shadow (htc juno) running WinMo... Worked beautifully.
I'm using the .26I radio, but seriously considering going back to the old radio to see if it improves performance.
I also just tried to pair and do file transfer with my friends Blackberry and failed as well. I think beartard is right... No OBEX.
I am having issues as well. My Pioneer car stereo supports A2DP, and all is well when the thing is paired, but next time I go to use it, I get connection "Error" when connecting either HFP or A2DP. Disabling stereo bluetooth on the stereo seemed to fix HFP, but I want my Stereo bluetooth.....
Have others had much luck with A2DP?
hey thanks for the replies guys but i was looking for some answers haha
AFAIK, only A2DP and AVRCP was added in Android 1.5, so no big wonder file transfer wont work...
A2DP works like a charm with my A2DP headset - haven't tried with other devices.
/Mats
Stereo Bluetooth skipping issues
If streaming music via bluetooth is skipping, turn off your wifi and that will fix your problem. I was having major anxiety over this, but found the answer last night searching forums. I tried it out and my music has not skipped since. I stream music to my car stereo and it is excellent now that I've turned my wifi off.
I bought a bluetooth car kit to play music with. When I first paired the device to my phone, all 3 the media buttons worked (play/pause, forward, and back). The next time I used the kit only the play/pause button worked.
Knowing Samsung sucks at everything, I didn't waste my time disconnecting/reconnecting. I plugged the phone into the ADB interface and watched the system log in DDMS. What I found was really confusing.
I plugged the bluetooth kit into a 12v source and connected the 2 devices. I played some music off my phone and watched the log as I presses some buttons. In the log, the button presses were actually showing up in the log with the right scan numbers but the media player just doesn't respond to anything other than play/pause.
If I try different combinations of connecting/disconnecting I can get the media buttons to work but 90% of the time they wont. WTF is happening T_T
I have not had that trouble with my bluetooth head unit. I have been using Pandora and Mixzing. I only have issues with audio dropout and it seems to disappear (stop dropping) after the connection has been used for maybe 10-15 minutes.
It worked perfectly with my Samsung Omnia.
I found out that the bluetooth controls only work when the media app is in the foreground. If I'm on the home screen the controls will be ignored. If I have pandora open on the screen, pandora will be controlled.
This is annoying and I wonder why nobody else is having this problem.
I understand your frustration. And if I may, I would like to add this question:
Does anyone have a handle on the interrelationship between the Epic 4G, wireless headsets, and AVRCP music players?
My rooted Samsung Epic 4G is running 2.1 and has the stock ROM.
I’m looking for a compatible MP3/Wireless headset combination using either the Motorola S9-DH or S10-DH, or the Rocketfish RF-MAB2. So far, I am unable to do everything the headsets say I should be able to do, that is, answering a call and having the player resume (both headsets get this far) and also controlling the MP3 player, i.e., allowing for track skipping, pausing, etc.
In short, I do not have control over an MP3 player’s basic functions from a wireless headset.
I have tried both the Motorola and the Rocketfish. While the Motorola does not see an MP3 player at all, the Rocketfish does control an MP3 player’s volume level.
The following MP3 players were tried: stock Epic player, Winamp, PowerAMP and MortPlayer Audio.
I am open to suggestions. I am not wed to the Motorola or Rocketfish, but I am comfortable with the way they sound and fit.
OR...would you buy the headset you like, work the MP3 player manually (not a good idea while driving) and tough it out until Froyo addresses the issue of Bluetooth connectivity?
Thank you.
is it possible on the vibrant to stream music to my jawbone bt earpiece ? i used to do it on my touch pro 2. but with android im not sure ? help me out guys please
Yes, it's possible (though it may depend on what model Jawbone you have). Make sure your Jawbone is updated with H2DP and your phone should be able to recognize that the headset can be headphones as well. Check out the Jawbone website for more info.
If his jawbone is like my old one ( now use a Plantronics Pro), it didn't support Stereo (H2DP)
One of things I plan on looking into the Android source for is why someone hasn't come out with a "Mixer" app to route Media out the BT Headset profile. I'm sure there's a technical reason.
I've never seen a phone send music out to a BT headset... I don't understand why that is, it does if you use a wired headphone.
Things like podcasts should be fine in a mono headset. Even music would be better than nothing.
Robert
A2DP?
The new jawbone hero has an update that supports A2DP. Music sounds terrible through it tho, I even streamed NPR's car talk through it and it was scratchy. For some reason too, the phone prefers streaming over BT rather than through the audio jack when it's plugged in. Turned off the audio profile for the headset.
Scenario I'd like to see:
Wired Headphones plugged in
Bluetooth connected to audio receiver
Music plays through audio receiver
Calls go through wired headphones
If a call comes in it pauses the music app and transfers audio to headset. As soon as call complete music continues.
I can get this to work on my Scotts Clean Rom Note 2 and iPhone 5 fine but I can't seem to find a setting or app that can allow this behavior.
Why?
I much prefer hearing music through my car speakers and if I get a call it's much easier to hear and talk through the wired headset.
Anyone else have this use case? Figured out an answer?
Just a thought since I haven't tired this yet.... What happens when you turn off phone audio(but leave media) for the car in the bluetooth settings on the phone?
captivatingtab said:
Just a thought since I haven't tired this yet.... What happens when you turn off phone audio(but leave media) for the car in the bluetooth settings on the phone?
Click to expand...
Click to collapse
Gave it a try, still reverted to headphones.
Thanks though!