No 3G - Vibrant General

Has anyone gotten 3g to work with a samsung vibrant on t-mobile network. I tried setting up with the settings which work in 2.1 but this is not working:
T-Mobile US
apn: epc.tmobile.com
mmsc: http : // mms.msg.eng.t-mobile.com/mms/wapenc
mmc: 310
mnc: 260
apn type internet+mms
The only one that shows is ATT but I do not have a att sim card so this is not going to work. I have tried turning on and off the airplane mode but this did not work. Anyone get around this issue when upgrading to 2.2 beta?

moncapitane said:
Has anyone gotten 3g to work with a samsung vibrant on t-mobile network. I tried setting up with the settings which work in 2.1 but this is not working:
T-Mobile US
apn: epc.tmobile.com
mmsc: http : // mms.msg.eng.t-mobile.com/mms/wapenc
mmc: 310
mnc: 260
apn type internet+mms
The only one that shows is ATT but I do not have a att sim card so this is not going to work. I have tried turning on and off the airplane mode but this did not work. Anyone get around this issue when upgrading to 2.2 beta?
Click to expand...
Click to collapse
lemme guess, you're using the Bell Vibrant, right? With the hard menu key?
If that's the case, you won't get 3g on TMO, and you're using an i9000

Bell vibrant? What do you mean by that? I purchased this phone through tmob when it cam out. It does not have a hard home key. They are all touch buttons.

moncapitane said:
Bell vibrant? What do you mean by that? I purchased this phone through tmob when it cam out. It does not have a hard home key. They are all touch buttons.
Click to expand...
Click to collapse
then if you can't get 3g to work, either your phone is defective, or you live in an area that TMO doesn't yet offer 3g coverage. There's no work involved in getting 3g to work on the phone. it's automatic.

That sucks man. Call tmo support and have them check your area. You shouldn't have to set anything up to get a 3g signal.
Sent from my SGH-T959 using XDA App

For the first day I had some issues with my 3G but I messed with the apn and it works great I've had the phone for a few weeks and always have coverage. Check to see what you apn is at?
Sent from my SGH-T959 using XDA App

No, I have 3G normally if i use the 2.1 but when I upgrade to the 2.2 beta rom, I do not have access to 3G. I was hoping someone could help with this. I do see a number of posts saying people had to add this manually but I tried and it did not work. Anyone seen this in the US?

Related

AT&T on G1

Wondering if these services work with AT&T on a regular sim-unlocked G1:
3g work with AT&T ?
MMS work with AT&T ?
Is Root required?
I do know how to root and sim-unlock, asking for my dad whose wanting to get a G1.
AT&T's 3G is on a different frequency, so no.
MMS should work with the correct settings listed somewhere in the forums. Root is not required to use it on another network.
xyrcncp said:
AT&T's 3G is on a different frequency, so no.
MMS should work with the correct settings listed somewhere in the forums. Root is not required to use it on another network.
Click to expand...
Click to collapse
Thanks for the quick response, what is the highest service level that will work then? E or G ?
Deuces said:
Thanks for the quick response, what is the highest service level that will work then? E or G ?
Click to expand...
Click to collapse
Edge will work.
You should be able to get 3g on the HTC Dream on AT&T assuming you buy the Canadian version from Rogers. I believe they can be unlocked but I'm not sure. They haven't been rooted yet. We're trying to get that now. There were some donations put together and we sent Haykuro a Rogers phone last week for him to try and root. It should be at his place tomorrow, so hopefully it wont take him too long to root it, then you'd have full control over the phone.
However just simply unlocking it should allow it to work on AT&T's 3g network as both AT&T and Rogers use the same frequencies for their 3g network.
I have the G1 on AT&T everything works besides 3G which isn't a huge deal because T-mobile doesn't have 3G where I am.
I also use an ADP1 on AT&T in Phoenix with no issues besides no 3G. I get about 200kbit/sec down and 120kbit/sec up. Nothing to write home about, but it works.
Use the following APN to connect and get MMS:
APN Settings
Name: AT&T
APN: wap.cingular
Username: wap.cingulargprs.com
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410

G1 + Cyanogen 4.2.8 + att = not working

Hi folks,
I bought a Cingular GoPhone cellphone and i want to use the line on my G1. The problem is that the G1 doesn't register the sim card on att's network. The crappy phone works fine though.
When going to "Wireless Controls > Mobile Networks > Network operators > Search networks" i am getting att's network listed, so i guess the phone is able to scan for networks. Since my sim card is an att's, the phone should be able to register the sim card to At&t network, but i'm getting "Your sim card does not allow a connection to this network" error. Same error when trying the "Select Automatically" option.
I've been google'ing but could't find a solution, even though there is a lot of threads going back and forth.
Here is my configuration info:
Phone: T-Mobile G1 ( Dream PVT 32B DREA10000), Unlocked, Rooted.
Sim Card: AT&T (Cingular), 1 week old.
Firmware: CyanogenMod 4.2.8
Build Number: DRC83
Radio: 2.22.18.26I
HBoot: 1.33.2005
Any ideas?
Thanks in advance
Have you already forgotten that G1 is locked to Tmo?
You need the unlock code for it to be used on other carriers.
Plus G1 will only beable to use 2G on att.
Cyan has a new version out now.
The phone is unlocked. I have been using it with south american carriers without any problems.
I don't need 3g right now. ( gophone line )
robertoestivill said:
The phone is unlocked. I have been using it with south american carriers without any problems.
I don't need 3g right now. ( gophone line )
Click to expand...
Click to collapse
You should have said that
Try using the newer cyan thats out.
But wipe
flash the base rom
then flash the cyan on top
Ace42 said:
You should have said that
Try using the newer cyan thats out.
But wipe
flash the base rom
then flash the cyan on top
Click to expand...
Click to collapse
Wiped, flashed with ( http://wiki.cyanogenmod.com/index.php/Latest_version#Defanged_DRC83 ), and then flashed newest Cyanogen ( 4.2.11.1 ).
Still no luck.
Getting the same exact error while registering the sim card.
Thanks
robertoestivill said:
Wiped, flashed with ( http://wiki.cyanogenmod.com/index.php/Latest_version#Defanged_DRC83 ), and then flashed newest Cyanogen ( 4.2.11.1 ).
Still no luck.
Getting the same exact error while registering the sim card.
Thanks
Click to expand...
Click to collapse
Try skipping the sign-in.Turn your phone off then put the sim in.Also change the Apn settings and change provider to att in settings.
Ace42 said:
Try skipping the sign-in.Turn your phone off then put the sim in.Also change the Apn settings and change provider to att in settings.
Click to expand...
Click to collapse
Same error while trying to select the provider: "Your sim card does not allow a connection to this network".
I manually added att's apn settings, but after i saved it, it doesn't get listed at all, it dissapears.
Any clue on what can be wrong here?
Thanks
APN
try adding att apn into the phone then try again
clevetbs said:
try adding att apn into the phone then try again
Click to expand...
Click to collapse
i have an unlocked g1 with att and i had no network problems with cyanogens roms.
Try checking the "2G only" box in data settings. It might be tring to sign into AT&T's 3G voice network, which IIRC, is not a supported feature on GoPhone accounts.
clevetbs said:
try adding att apn into the phone then try again
Click to expand...
Click to collapse
After creating the att apn, the apn doesn't get listed on the apn list and it's not available. I did save it, but the list appears empty.
This is the att's apn settings i found online:
Name: att
APN: wap.cingular
Username: [email protected]
Password: cingular1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
tyweezy can you please compare it with yours?
Try checking the "2G only" box in data settings.
Click to expand...
Click to collapse
I tried, didn't work, probably because i couldn't add the apn.
robertoestivill said:
After creating the att apn, the apn doesn't get listed on the apn list and it's not available. I did save it, but the list appears empty.
This is the att's apn settings i found online:
Name: att
APN: wap.cingular
Username: [email protected]
Password: cingular1
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
tyweezy can you please compare it with yours?
I tried, didn't work, probably because i couldn't add the apn.
Click to expand...
Click to collapse
Do you know what spectrum or frequencies your phone runs at? Sometimes they don't include the international spectrum's (or american)if the phone is imported. Nokia has a few phones that needed a North American version they usually have the NAM title next to there name to show they support the American spectrums.
psychoace said:
Do you know what spectrum or frequencies your phone runs at? Sometimes they don't include the international spectrum's (or american)if the phone is imported. Nokia has a few phones that needed a North American version they usually have the NAM title next to there name to show they support the American spectrums.
Click to expand...
Click to collapse
I don't know. I bought the phone in the US, though. Guess it should work.
I remember playing around with SPL and radio images while trying a custom rom with rosie UI, but it looks that the versions posted in the first message should work just fine.
i had att for while and it worked as soon as i unlocked my phone went to tmo because i needed 3g but still use att sim every now and then with no problems and i think ive used every rom on xda and alldroid
phantom574 said:
i had att for while and it worked as soon as i unlocked my phone went to tmo because i needed 3g but still use att sim every now and then with no problems and i think ive used every rom on xda and alldroid
Click to expand...
Click to collapse
Yeah but he's saying his phone is from South America. I'm sure yours wasn't
The phone is from the US. I bought it on ebay, shipped and used in south america.
I just came up with something that actually match all the sympthoms.
Maybe this is happening because the phone IMEI be banned from att's network.
Is there any way i can find out if the phone is reported as stolen or something like that ?

3g Data Loss (Not signal loss)

So i noticed since installing custom rom, that my 3g data no longer works, the signal is fine, i can make/receive calls but as for data, market/internet anything requiring a connection it just does not work unless connected to a wifi network, and before you ask! yes i was able to do it before from stock so its not a service provider plan issue lol.
First, is the mobile data on the phone itself turned on? I know from using a few different rom they have the ability to turn off just mobile data.
Other than that, I know verizon has had some problems which only required an ESN swap (changing the phone connected to your account to another phone, then back to your current phone is the process to do this), but I also see from your profile that you are on Telus, so I merely offer these two options in hopes that one may help.
well i haven't checked that actually, lol so i will, but i'm on a telus network if i could make a sig lol id have that info sorry haha. Oh yea it is displayed there haha my bad.
k just checked, am i in the right place (just to make sure) Settings -> wireless and network -> mobile network ->3g Packet Data ON
and if so, still no luck.
How do i do this ESN swap?
Yeah that's the correct information, if you haven't done it already, I would at least try toggling it off then back on and see if that fixes it.
After that, as I said before, I don't know much about the Telus Fascinate but I'm sure that there are a few developers or people experienced with Telus Fascinate lurking around the forums that may be able to help. Sorry I couldn't help you more.
That's Okay, lol the ESN swap is it difficult? maybe its the same for telus as verizon..
for verizon a person could log into their online account and switch to an older phone, then switch back. I personally had to take my phone to Best Buy and they could do the ESN swap for me there.
Again not sure on telus......but you can change the esn by a number up or down and not use another phone. I have completed this process several times when I have lost 3g. You will force repartion of data.
Sent from my SCH-I500 using XDA Premium App
It sounds like your having the same problem iv been having. If your 3G icon is disappearing a dmu reset should fix your problem.the esn swap is a way of resetting your dmu but I find it easier to just call into tech support and tell them to do it. If they refuse make them or hang up and call again. Once you get some one who will do it it takes 2min.
Sent from my SCH-I500 using XDA Premium App
LOL wait... ESN swap is for CDMA phones. Telus is GSM.
OP, you didn't flash a Verizon Fascinate ROM onto your Telus model, did you? If so, you need to do a full stock Odin including GSM modem.
Hence not on sure on telus. Obviously esn is of no help with gsm. Thanks for the info.
Sent from my SCH-I500 using XDA Premium App
Yes thanks for the info, definitely good to start learning about telus since it's going to show up more and more on these forums
Swype'd from my CM7 Fascinate
i dont think so otherwise this TELUS ONLY guide should be edited to some sort lol http://forum.xda-developers.com/showthread.php?t=923712
s44 said:
LOL wait... ESN swap is for CDMA phones. Telus is GSM.
OP, you didn't flash a Verizon Fascinate ROM onto your Telus model, did you? If so, you need to do a full stock Odin including GSM modem.
Click to expand...
Click to collapse
oh fascinate verizon rom no def not, its a vibrant using that guide.
I had a lot of problems with my 3 g going away. There wasn't even a 1x just bars. I was frustrated to the point of getting a different phone. I had verizon put a different phone on my account then out my samsung back on and it fixed it. Hopes this helps.
Sent from my SCH-I500 using XDA App
i could just tell them my data isn't working and see what they do i just wanna make sure that nothing they do will brick my phone...lol
loki9 said:
oh fascinate verizon rom no def not, its a vibrant using that guide.
Click to expand...
Click to collapse
I'm guessing it's an APN issue. Make sure you have a Telus APN in there.
s44 said:
I'm guessing it's an APN issue. Make sure you have a Telus APN in there.
Click to expand...
Click to collapse
LOL i just came to say i solved my problem and thats what it was lol, thanks anyway now i have 1 issue left, my market and internet data works now without wifi thanks to the apn realized it wasn't there. Now i cant send/receive picture msgs...is this a rom defect? or..cuz i know some roms have bugs...i guess that would prob be a question for the rom dev hmm..well this has been solved anyway. Im not sure if its posted on these forums but if it isnt for future ref. Heres the default APN for Telus Canada.
Name: TELUS SP
APN: sp.telus.com
Proxy: 74.49.0.18
Port: 80
Username: <Not set>
Password: <Not set
Server: <Not set>
MMSC: http://aliasredirect.net/proxy/mmsc
MMS Proxy: 74.49.0.18
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 302
MNC: 220
APN type: default,mms
I had the infamous 3g issue with an interesting side note...
The esn swap worked perfectly, however, when I used *228 with option 2 (update roaming capabilities) the next day, my 3g started dropping again. Did another esn swap, and its been fine now for 4 days. I did use the *228 option 1 both times and nothing changed... only when I used option 2 the first time did my 3g start dropping again.
Sent from my SCH-I500 using XDA Premium App

[Q] Galaxy S4 APNs for AT&T

I just got my Galaxy S4 yesterday and I am working on optimising it for speed and performance. One of the things that I noticed in the network settings is that I think I APN is set incorrectly.
I have a Nexus 4 and in order to get the best data speed I had to use the AT&T LTE APN or (PTA). I am assuming this should be the same on the Galaxy S4 yet when I go into my APN settings I have the AT&T PHONE APN.
It is my understanding that the Phone APN can only get HSPA+ and not LTE. Since this is an LTE phone shouldn't we use the PTA LTE APN?
I have ATT Phone as APN and I get LTE. Not sure about the other one you mentioned.
daraj said:
I have ATT Phone as APN and I get LTE. Not sure about the other one you mentioned.
Click to expand...
Click to collapse
Maybe the PHONE APN is capable of receiving LTE but I am curious if the PTA APN would get faster data speeds.
RootzWiki http://rootzwiki.com/topic/31135-att-apns-for-custom-roms/
This post indicates that the PTA APN gets (All the Mbps)
Mine is using the PHONE APN and i have no problems getting LTE. Just did a speed test and i'm getting speeds of 50+Mbps over LTE so it seems to be working fine for me.
PHONE is an APN that AT&T umbrella'd all types of data connectivity under. PHONE will automatically choose to connect to the fastest available network in your area. PTA is what they were putting on phones when LTE phones were first being released, but since then, PHONE is the primary APN one should be using. Using PTA won't hurt anything, and should work fine, but why bother if PHONE is already programmed in there.
At least, that's what they the us at my AT&T Data Support call center I work at :/
Sent from my SAMSUNG-SGH-I337 using xda premium
Jragyn said:
PHONE is an APN that AT&T umbrella'd all types of data connectivity under. PHONE will automatically choose to connect to the fastest available network in your area. PTA is what they were putting on phones when LTE phones were first being released, but since then, PHONE is the primary APN one should be using. Using PTA won't hurt anything, and should work fine, but why bother if PHONE is already programmed in there.
At least, that's what they the us at my AT&T Data Support call center I work at :/
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
And which is true.
Just FYI, on the HTC One there is absolutely no speed difference between the pta and phone apn's.
Can anyone post the PHONE APN setting, I am T-Mobile unlocked on AT&T need to enter that APN manually. Thanks!
Sent from my SGH-M919 using xda app-developers app
Here:
Name: ATT Phone
APN: phone
Proxy: Not set
Port : Not set
User name: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,mms,supl,hipri
APN protocol: IPv4
APN roaming protocol: IPv4
Enable/disable APN: APN enabled
Bearer: Unspecified
Thanks, that's what i got. wasn't sure if there is an issue as i never see hspa+ in dayton. at least not yet. it is an hspa+ area. so wondering what the issue is--
only hspa 11 and hspap 15
NOT 4g speeds as advertised
Ya at&t switched over to phone APN which does get LTE, when i tried PTA i got slower speeds then with phone...
DJsCrIBbLe said:
Ya at&t switched over to phone APN which does get LTE, when i tried PTA i got slower speeds then with phone...
Click to expand...
Click to collapse
Anyone know how to save new APNs? I'm on Omega ROM for the i9505, which has the old Cingular WAP settings in there but no 'ATT Phone' settings so I can use the LTE.
I enter the new APN then go to menu, and then save. However, instead of saving it just goes back to the screen with the one Cingular APN like I never entered or saved anything....
ThePublisher said:
Anyone know how to save new APNs? I'm on Omega ROM for the i9505, which has the old Cingular WAP settings in there but no 'ATT Phone' settings so I can use the LTE.
I enter the new APN then go to menu, and then save. However, instead of saving it just goes back to the screen with the one Cingular APN like I never entered or saved anything....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2295557
Kernersville, NC?
Has anyone had any issues with MMS suddenly not working? I wonder if the mobile APN for it has changed.
sloanster said:
http://forum.xda-developers.com/showthread.php?t=2295557
Kernersville, NC?
Click to expand...
Click to collapse
Yes, that is correct.
ThePublisher said:
Yes, that is correct.
Click to expand...
Click to collapse
I use to work there nice little town...:good:
sloanster said:
I use to work there nice little town...:good:
Click to expand...
Click to collapse
Small world. That's cool. I like it here.
Work in kville myself!!
Sent from my SAMSUNG-SGH-I337 using xda premium
henrybravo said:
Just FYI, on the HTC One there is absolutely no speed difference between the pta and phone apn's.
Click to expand...
Click to collapse
WOW henry hadn't seen you since the inspire days!!
sloanster said:
WOW henry hadn't seen you since the inspire days!!
Click to expand...
Click to collapse
Hello! Yep I'm still kicking. Since the Inspire I went SGS2 > SGS3 > HTC One.

New NEXUS 4 APN Settings

NEXUS 4 APN Settings
Has anyone seen APN settings like theses and can you explain why they work?
Name: Straight Talk
APN: wap.tracfone
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
I live in Columbus,Ga using a T-Mobile sim on straight talk and tried everything I could find even ST customer service and nothing worked well. Then 1 night on straight talk CS chat the rep gave me this and now I get HSPA+ and 4G all over the area. What I don’t understand is the APN: wap.tracfone and the MMSC with cingular in it. All of the other APN’s I found at XDA, the net or straight talk never used those two items. Also I am using a hybrid radio flash but have been using various combinations of APN’s and radios since I got the phone and the APN is what made the difference.
I'm in Tmobile classic plan and my data has been slow the past week or so, not sure why. I am gonna try this APN just to see what happens, it is working, but I'll see how fast it is.
ahunter said:
NEXUS 4 APN Settings
Has anyone seen APN settings like theses and can you explain why they work?
Name: Straight Talk
APN: wap.tracfone
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
I live in Columbus,Ga using a T-Mobile sim on straight talk and tried everything I could find even ST customer service and nothing worked well. Then 1 night on straight talk CS chat the rep gave me this and now I get HSPA+ and 4G all over the area. What I don’t understand is the APN: wap.tracfone and the MMSC with cingular in it. All of the other APN’s I found at XDA, the net or straight talk never used those two items. Also I am using a hybrid radio flash but have been using various combinations of APN’s and radios since I got the phone and the APN is what made the difference.
Click to expand...
Click to collapse
if it's cingular, then you probably actually have or they converted you to, AT&T
notbrodie said:
if it's cingular, then you probably actually have or they converted you to, AT&T
Click to expand...
Click to collapse
Thanks, that explains the cingular and Straight Talk does have, or had ATT, sims I have a T-mobile sim. I still don't see how an ATT APN works with a T-Mobile sim.
MMSC = multimedia messaging service center. Data does not use this unless it is MMS related. How is your MMS working? The other fields could be standard and you would actually be going thru T-Mobile for data.
Sent from my Nexus 4 using Tapatalk
fernandezhjr said:
MMSC = multimedia messaging service center. Data does not use this unless it is MMS related. How is your MMS working? The other fields could be standard and you would actually be going thru T-Mobile for data.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
My data is fine now, where before I was getting no data Again with this new APN I am getting data coverage in my area where until I changed to this APN I could not get coverage. I even asked at the local T-Moile store about coverage and they said that in my specific area coverage for data is not good but w/this change I am a happy customer.
was working. may be my fault i try again
Sent from my HTC One using Tapatalk
Any Status Updates...?
stevew84 said:
I'm in Tmobile classic plan and my data has been slow the past week or so, not sure why. I am gonna try this APN just to see what happens, it is working, but I'll see how fast it is.
Click to expand...
Click to collapse
Any status report on whether this new APN configuration improved T-Mobile classic plans Data speed?

Categories

Resources