Related
Hello Everyone I felt my previous explanation of the problem I am facing may not have been a good one so I am going to try explaining my problem again. I am currently experiencing several problems. I have a samsung Fascinate. When the phone was working fine I rooted it and all was still fine. I then installed clockworkmod(rom manager). I tried installing several roms by downloading them to to rom manager then selecting the one I want then rebooting the phone. But everytime I tried installing a rom by selecting apply update.zip from sdcard E:signature to verifly whole-file signature, E:signature verification failed, installation aborted. After reading through some of the links in xda developers forums I realized I need Odin. Once I installed Odin it never recognized my fascinate in the ID com column with in Odin. I made sure the phone was mounted by selecting mount from top drop down menu from fascinate. At the same time I notice that in Windows XP it would say USB not recognized although Fascinate would show up as a mass storage when checking under explorer and see a F: drive for the phone. Iam able to see the files in the phone and transfer if necessary. I then tried getting a new update.zip and rebooting to menu where u select apply sdcard update.zip same error of invalid signature. then tried cwmrecovery and rebooting ..no luck either. Then I found a link containing a file named stock.zip...but no luck either. So I decided to wipe and reset to start all over and when I did that and the phone started and I unlocked the screen I began getting endless forceclose. This is where I am now. Does anyone have any suggestions.
You need to download the Samsung drivers first. Then proceed to use Odin.
Sent from my SCH-I500 using XDA App
Also wrong section.
Sent from my SCH-I500 using XDA App
bigal2908 said:
when I pull the battery then hold the volume down and then insert the usb plug the yellow block on Odin does not appear and I get a message on my windows xp saying device not recognized.
Click to expand...
Click to collapse
Download mode is easy:
Step 1. Power up your phone (while phone is off, press power and release), then
Step 2. Immediately hold volume down until you see the yellow Android warning sign.
I downloaded the usb drivers for mobile but ti still didn't wok. What else do you think it might. When I connect the phone to computer (windows XP) on the lower right it says USB device not recognized.
Are you pointing the device driver installation to the path where the drivers are? And did you download the drivers for your correct cpu 32 or 64 bit?
Sent from my SCH-I500 using XDA App
I forgot to mentioned that I have installed the samsung usb drivers two times. still no luck. I even read that if you unplugged the usb and then shoutdown windows xp and physically disconnect power and wait about a minute or two sometimes this would help xp recognize usb port. I also tried disabling and enabling the port via manage in my computer on xp while the fascinate was connected and also tried it disabling and enabling while phone was not connected no luck eitherway. Any other suggestions. Thanks inadvance for everyones suggestions.
the drivers I downloaded are 32 bit. how do I point the drivers as you have mentioned. I also tried downloading android sdk tools and tried to figure out how to push the files top the phone but when I typed adb device under listing devices it does not show the phone or anything for that matter. I am confused now as to what may be the original problem and how to tackle the problem should I work on USB problem first then force close then update.zip any suggesstions.
You need to go to device manager, find the phone under the section that talks about not recognized usb's, right click on it then go to properties, then you need to manually select the drivers you downloaded..
Ever since I rooted I can not get my Epic to connect to a computer period. I'm about to give up and just deal with what I got, hopefully someone can tell me what I'm doing wrong. Before anyone decides to be a smart ass I have used the search function literally for days and have tried tons of things recommended with no result. I am the first to admit I'm an idiot when it comes to anything involving computers but I'm pretty determained to learn.
This has to be the phone because I have tried to connect to 2 desktops (1 running Windows 00 and 1 running the most updated Ubuntu), and 3 laptops (Windows xp, Windows Vista and Ubuntu). When I rooted I used the Vista computer and connected fine (can't anymore). I didn't have the space on the C drive to install the Android SDK so I switched to Ubuntu (first time user btw lol). Somehow when I was backing my SD card I lost any access to it or the notification bar. I never got my SD back til I rebooted but I haven't been able to connect to any PC since. When I charge (even in the car) it always tries to stay in mass storage mode. I basically charge in my car with my phone off hoping it will just charge and not mount my sd card to my car or wall lol. Yes I wiped 3 times, partitioned sd, tried several different cables (but my husband used mine and no problems on his Motorola) I'm sure I've done something wrong when I rooted or mounted to Ubuntu.
I also can't use adb. I followed the directions to the t (a few times lol) but when I run any commands it says "no such file or directory" I didn't have adb on the windows pc when I di noobnl's one click so I never ran the (adb shell ect) commands. I now can't do jack. I am now running noobnl's DI18 ROM with modem.bin flashed thru Clockworkmod.
I have tried all the basics you will find wit 2 days of web search.
My goal is DK28 (dream on Erica lol)...Thanks for any help and for anyone sparing me a lashing ;-)
Sent from my SPH-D700 using Tapatalk
When you plug in on your windows pcs...in Device manager..do you see anything appear? also do you have USB debugging on the phone?
USB debugging on?
Have you tried reinstalling the drivers for the Epic?
Rebooted phone and PC? (Sometimes it helps)
Used Odin?
Something might have been screwed up during one of your downloads, bad file maybe. Try reinstalling your drivers first, use Odin (phone must be in download mode), and see if it recognizes te device. If it does then Odin the stock .tar file and go from there. It'll give you a fresh start.
That's all I can think of right now.
Sent from my SPH-D700 using XDA App
I bet your USB debugging is on since most root's requier it. Even tho it says connect to pc if usb debugging is on it wont connect to my windows 7 box
I would suggest, if you're really having this many issues, just boot into download mode (1 on the keyboard + power button) and odin back to di18.
Just for kicks have you tried Settings > Privacy > Factory data reset? I assume that wiping does the same thing if not more but it's worth it to see if it somehow resets a setting that might be the issue.
What's left - software issue or Hardware issue.
Software:
hmmm...yeah gotta try connecting through Odin which uses downloader mode instead of USB modes...
Can Odin see your phone? Run Odin as admin with antivirus off, and proper samsung drivers installed. Then boot phone holding down 1 key into downloader mode. Connect to computer through USB port on back of computer (i.e. directly to motherboard) - does Odin identify something attached to USB port?
Yes - flash the dk28!
No - with Odin still on, unplug the USB cable, pause, and reconnect it. Still No? Try a different USB port on computer. Also try uninstalling and reinstalling the drivers - be sure to reboot the PC. If still No, then try on another computer, and as you did before, try different cables. Still No?? --> hardware problem with phone.
Hardware problem with phone: Look at the usb port in the phone - is there any junk in there that might interefere with the connection?
Yes - clean it out
No: phone perhaps internally damaged:
Solution for hardware damage:
You and husband clean up and go to sprint store.
At store - tech will know phone is rooted, so:
--Tech more likely to like you? You handle it, maybe even blame husband. Husband can silently attend and look sheepish, playing the part of 'me man, me dominate environment, me break fancy tech of wife, me sorry." Try to get free replacement phone while simultaneously promising never to let your husband root the phone again, or even touch it.
--Tech more likely to like husband? He goes alone, cops to the true story of how you rooted it and then was backing stuff up when it suddenly stopped working [truth from men? so sincere!]. Try to get free replacement phone while simultaneously promising not to let you in the house should you even attempt to root again.
P.S. forgot to add you might turn off the PCs firewall while testing, as well.
quik99 said:
I bet your USB debugging is on since most root's requier it. Even tho it says connect to pc if usb debugging is on it wont connect to my windows 7 box
Click to expand...
Click to collapse
same here. I tried out the free tethering app the other day and with usb debugging on i coudl never get it to install the proper drivers. Without it on and the 64bit drivers installed Odin worked just fine.
I have seen many Galaxy S devices not connect to a computer because of a faulty USB cable. Had my girlfriends sister switch out 3 Vibrants only to accidentally try and connect it to a laptop with a different USB cable and I've seen two others not connect with the stock Samsung USB cable.
How I fixed the tethering issue
I've had the same problem with my galaxy s - connecting to the PC (Win7 32bit) just doesn't do anything. As a test, I had a friend with the same phone/rom (froyo, rooted) connect - and he was able to! It installed the drivers and it just worked. He disconnected, I connected, and now it's fine.
So, see if you can find someone with the same phone and see if they can connect. Makes no sense to me, but it worked.
I've had my Epic fail to mount before. Interestingly any time I had an issue it was with a Mac - it always mounts on a PC. I'll stop now before I open up a can of worms.
Best advice I have is get a Dropbox account. You can use that guy to move files from a computer to the SD card without having to mount to the computer. Perhaps you can get a factory ROM (with root of course) on your phone that way?
You can get a app from the market called SWIFTP (free) & connect to your sdcard via ftp server. This can be a temporary fix till you get your connection error resolved.
I have 1 USB port on my laptop that the Epic shows up as "unknown device" on. Works on every other port, and everything else works just fine on the same port. The factory USB cable is finicky!
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Did you restart the computer at all?
usb debugging enabled?
i have trouble connecting sometimes and it's always solved by restarting the phone.
Basementboyz24 said:
Alright, Ive been browsing these forums ever since I got a Captivate and now I am trying to help a friend that has an Epic. They currently have dk28. Their Epic has always been Flakey on being detected on computers. We have tried three, it only gets detected on Mass storage on one of those and doesnt get detected in dowload mode on any of them. That being said, We cannot get back to stock via Odin, or use the Samsung official Update due to that it will not be detected in download mode. Can anyone tell me is there anything I can do at this point? Ive already tried 3 cables, uninstalling and re-installing drivers, etc... I am hoping maybe there is some way to get back to stock without odin, then from there getting to EB13 without the use of a computer. Thanks in advance and I look forward to posing here.....
Click to expand...
Click to collapse
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
megabiteg said:
Are you placing the phone in Download mode???
****Ensure USB Debugging is Enabled.
Download mode:
1. power off the phone.
2. Press 1 + Power button together
otherwise, I would highly recommend to:
1. uninstall drivers
2. restart the PC
3. install the Samsung drivers
4. restart
5. try connecting the phone (while powered on) and letting the PC recognize it.
6. Once drivers are installed, unplug the USB cable and Power off the phone
7. Place the phone in download mode and reconnect the USB cable and let the secondary drivers install.
8. unplug and reboot the phone, and restart the PC for last time.
Try Odin now, remember you need the phone in Download mode to use Odin.
Note: Yes I know I send the OP to restart many times his PC but, with windows we can never "restart" to much...
Click to expand...
Click to collapse
Did everything up till 5, and that did not work because the computer would still not recognize the phone. What now?
squshy 7 said:
Couple things:
What OS are you using? If vista or 7, plug it in in debugging and go to the devices window in control panel, see if there is a samsung device there. If there is, right click and look at properties..check to see if there's an adb driver. If you see other drivers but not adb then its matter of getting the drivers to install somehow.
Second, there IS a full di18.zip, and a modem updater.zip to di18 as well, both flashable in CWM..(I believe its in a thread started by noobnl, its kinda old)...you might only have to do the .zip though since you'll eventually be going to the eb13 modem. I don't know for sure.
But be wary: switching android versions with CWM can be dangerous. I know it sounds counterintuitive, but it can actually be riskier than using odin. I would say use this only in last resort.
If you decide to do this, MAKE SURE you have the full download (I say download twice and compare the sizes just to make sure), have a full battery and keep it plugged in, and do your 3x wipes
Good luck
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Im Using Vista and No Drivers were there.... And I guess I may be at the last resort point. Full details?
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
I had issues with mine taking the update (and issues with it beforehand) and getting it recognized on two different computer, multiple times, it seems completely random whether or not it would work sometimes.
thepervster said:
some people have tried changing usb ports and it will work.
anyone else having problems not being able to connect phone to comp. can try this method but not sure if this works on the dk28.
what you could do is to remove the microsd card from phone use the adapter that came with it and put sd card into your laptop or if you have a external hub then your microsd will just be a storage devise then download the mac version of froyo from samsung (sorry i can't post outside links yet)but it is the samsung support downloads then search for this SPH-D700ZKASPR click on the software then download the mac version to comp. then copy and paste what you downloaded to the root of the sdcard (the first one you see when you open the sdcard) then put card back in phone, power off phone wait untill all lights go off press volume down, camera and power at same time. then in recovery chose update.zip from sd by using volume buttons to chose what you want to do then press the home button to start.
Click to expand...
Click to collapse
Any confirmation on whether or not this is safe and will work???
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
thepervster said:
this is how i put different updates in zip format on my phones sometimes my comp hesitates, so to make sure they go on sd card all the way this is how i do it. its doing the same as mounting phone in storage mode.
but i went back to stock ecliar di18 2.1 a couple days ago and i had no prob.at all.
i just didn't want to wait for the ota and i found the update.zip on the samsung website yesterday at about 6 pm. downloaded it and it worked great. was rooted this morning at 7am and am good to go.
Click to expand...
Click to collapse
I dont see how this is going to help me since I am not on stock....
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
thepervster said:
sorry, what i was saying for you was to change ports. i guess what should have been asked is are you rooted or do you just have the unofficial dk28 on it from dec. and have you removed any of the bloatware?
Click to expand...
Click to collapse
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Basementboyz24 said:
I tried changing ports multiple times. I got a new cord, and now it finally detects the phone in regular mode but it will not in Download mode or when I have USB debugging on. Any more ideas anyone?
Click to expand...
Click to collapse
Hate to ask, but did you follow the instructions EXACTLY as the SW Updater tool says? Pull battery (next) - Download mode (next) - plug into PC (next) - Pull battery (again) (next).
One of the steps the tool does has to do with installing drivers... you mentioned Vista, but is it 32 or 64 bit? Have you tried a different PC?
Whosdaman said:
Yes change USB ports. The ones in the front normally don't work. You need one directly on the mortherboard
Click to expand...
Click to collapse
I have the exact issue with my phone. I can only connect to my computer using the back usb ports (off the motherboard). I'm on windows 7. If you haven't, give that a shot. Even try uninstalling the drivers, connecting to the back usb ports and see what it does.
Saw someone post about Odin only working when they flipped the phone face down - thought it had something to do with the accelerometer. I suspect that in that case it might just be a bad connection and flipping the phone over made the contacts work. Worth trying though it you are desperate.
My phone is running DL30 based Blackhole 4.01 with the DL09 modem. When I try to plug my phone into a computer, the phone detects the computer, but the computer does not detect the phone.
- The phone starts charging
- The phone says "USB Debugging Connected"
- The computer does nothing
- adb devices lists no devices
- same thing in download mode, the computer doesn't see the phone
I have tried on OS X and booted into Windows XP.
I have no idea how to handle this. The one thing I tried was installing the Stock/rooted DL30 rom instead of Blackhole, but that didn't seem to fix and I went back.
To make matters worse, assuming that everything in ROM Manager is basically safe, I accidentally installed orange clockwork today and I cannot figure out how to get back to a working clockwork. The All ClockworkMod Recoveries option in ROM Manager does nothing - they all say download error.
Wow. If anybody can help with any of this, that would be great. Thanks everyone.
Did you install the proper samsung drivers onto the computer.
Edit: Also did you try to Odin, the title indicates no odin, but your explanation doesnt say so. (Open Odin, remove battery, hold down volume and insert usb cable)
what do you mean "onto my phone?" My Windows system has samsung drivers and OS X were both previously able to connect, use odin, etc. I don't know when it stopped working.
Yeah, odin doesn't work because the computer never detects that the phone is attached.
BatsShadow said:
what do you mean "onto my phone?" My Windows system has samsung drivers and OS X were both previously able to connect, use odin, etc. I don't know when it stopped working.
Click to expand...
Click to collapse
Sorry, meant computer.
What do you mean odin stopped working, your explanation doesnt say anything about odin as my edit in above post.
What I mean is that I used odin to install DL09. After that, I don't recall every attaching to my computer, but when I tried recently to install EB01, it no longer works. Sometime after flashing DL09, my phone is no longer detected by computer.
Im saying does odin detect the phone, not the computer.
You can odin the updated CWM (non orange) from here:
http://forum.xda-developers.com/showthread.php?t=942021
no, odin does not see the phone.
Have you put your phone in debugging mode
Sent from my SCH-I500 using XDA App
Read the first posy pleaseeee...
okubricko said:
Have you put your phone in debugging mode
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
Are you sure Odin doesn't work?
Check USB settings on your phone. My rom gives me media player mode and mass storage mode. Don't have my cable with me to test if media player mode stays hidden from the pc.
wynalazca said:
Are you sure Odin doesn't work?
Check USB settings on your phone. My rom gives me media player mode and mass storage mode. Don't have my cable with me to test if media player mode stays hidden from the pc.
Click to expand...
Click to collapse
Odin uses download mode with phone off.. What would this matter?
Sent from my Rocking dj05, themed superdark w/o swype mod, voodoo 5, with custom boot and shutdown.. With premium xda app.
I was IRL with OP trying to solve this a few days ago. It's not that improper/no drivers are installed, the computer literally does not detect that there is a device connected to that USB port. lsusb on Linux turns up just the controllers and root hubs, and devmgmt.msc on XP does not show anything attached at all, even after a manual hardware scan. adb shows absolutely nothing. My Captivate does show up on all the same scans, regardless of the USB mode (Kies/mass storage/media player/what have you.)
He has tried this on multiple computers, so individual ports/USB controllers/drivers/OS bugaboos have been effectively ruled out.
My thought is that between your last flash, OP, and now, your physical microUSB port on the phone is damaged. If you no can haz insurance, I'd say you're SOL.
FYI: The phone does not say "debugging connected" when plugged into the wall. I think the my USB connector is damaged or something. I may consider seeing if I can get it repaired, or I may just wait until I can get a different phone that's better supported by manufacturer (and therefore by the mod community)
Ive been trying to root my phone using cf root but when i put my phone into download mode and connect it to the pc odin doesnt recognise it. However, when i reboot my galaxy s one of the bars at the top of odin turns yellow and in the message box it says "Added!!". Ive tried this on 2 different pc's and its still not working.
When i first connected the usb cable to the pc, a message came up saying if i wanted to install the software from a cd, but i dont have one so i couldnt. Then it said that the software couldnt be installed properly. How do i install it properly?
seeraj15 said:
Ive been trying to root my phone using cf root but when i put my phone into download mode and connect it to the pc odin doesnt recognise it. However, when i reboot my galaxy s one of the bars at the top of odin turns yellow and in the message box it says "Added!!". Ive tried this on 2 different pc's and its still not working.
When i first connected the usb cable to the pc, a message came up saying if i wanted to install the software from a cd, but i dont have one so i couldnt. Then it said that the software couldnt be installed properly. How do i install it properly?
Click to expand...
Click to collapse
Download the drivers from my signature & install them, make sure you haven't connected the phone while doing so. Restart windows, connect the phone. Windows will install the required drivers, & you are ready to go.
Do i install from setup.exe. Its asking for a password.
Ive extracted it all but i cannot set up.
My windows is 32bit. Can someone please tell me where i can the samsung usb 32 bit drivers please?
Ive managed to get the 32 bit drivers and it says that samsung usb modem and the samsung usb android composite device are ready to use. However, it says that no driver was found for the ethernet controller.