Database Users

[FILE][ZIP] CWM - GAPPS with new market 2.2.7 - Works with MDJ Ginger 2.x

Hey guys,
Just thought I'd share this with you. This is a fairly new GAPPS I pulled from a Cyanogen forum post for you guys that still don't have the new market app. It's a Clockwork zip, so it installs through CWM. Tested and works perfectly on a fresh install of MDJ Gingerbread 2.0 and 2.1. I got it from a CM6 thread, so it seems to be compatible with it also.
Edit - New link is Gingerbread official GAPPS, must be flashed with Clockwork v1.1!
Enjoy!
-- LINKS TAKEN DOWN -- People are having issues and causing more damage to their ROMs than supposed to. Will fix and get back to everyone. Sorry!
WARNING: MAKE A BACKUP OF YOUR IMAGE AND APPLICATIONS BEFORE INSTALLING! I did it on a CLEAN ROM and cannot promise that it will work for everyone on a pre-installed ROM.

Any news on this?

[Q] Browser crash after install. Adope Flash Player 10.1

Hello,
has somone experience with the Adobe Flash Player?
After the installation the browser crashs !?
Mod Version: CM-6.1.1-Spica-a8.3
Ist theit another posibility to get the Flash Player?
Thx for help!!!
Till

Flash 10.1 will never run on Spica as it requires arm v7 and phone has arm v6. You can use FlashLite 9, head over to samdroid.net for details.

gen_scheisskopf said:
Flash 10.1 will never run on Spica as it requires arm v7 and phone has arm v6. You can use FlashLite 9, head over to samdroid.net for details.
Click to expand...
Click to collapse
I did what you recommended, but no funktion :-(

Can you give more details:
a) how did you install previous version?
b) how did you install the one from Samdroid?

gen_scheisskopf said:
Can you give more details:
a) how did you install previous version?
b) how did you install the one from Samdroid?
Click to expand...
Click to collapse
Android 2.2.1
Kernel 2.6.29.6
Mod CM 6.1.1. Spica a 8.3
First I had Eclair Android 2.1 on my phone.
Then I decide to change, cause I red under Android 2.2 Flash would be working.
After the installation of CM, I did whats in the instruction.
I copied both files on the sdcard/root. Then recovery and install the the *.zip.
Reboot. Then I installed the *.apk after the phone is back to normal mode.
Maybe their is no FlashPlayer for CM 6.1.1???
Thx

I can't say for sure, I'm still using Eclair, you have to search Samdroid to get an answer.
I have working FlashLite from Samdroid kitchen (android 2.1).

gen_scheisskopf said:
I can't say for sure, I'm still using Eclair, you have to search Samdroid to get an answer.
I have working FlashLite from Samdroid kitchen (android 2.1).
Click to expand...
Click to collapse
Now I have Eclair too on my Spica, but I see only the sign of flash player. What configuration you have in your phone?
Firmware 2.1-update 1
Basisbandversion i570EXXJD1
Kernel 2.6.29 [email protected] #70
Buildnummer
ECLAIR.XXJH1 / Samdroid 1.3.1.d
Thx
Till

Samdroid 1.3.1d as base, XM STD kernel, qbanin's all2sd, [email protected]
But FlashLite 9 is only usable in browser afaik (works in default and DolphinHD), I couldn't open any .swf file

Uninstall Gingerbread MIUI 2.3.4 on Galaxy S

Hello, i need to uninstall Miui Gingerbread to install the official Gingerbread, i'm much more used to it, how can i do it?? Already tried to clean up the data and system and tried the Sam's firmaware last gingerbread but it would not worked.. Is it possible to downgrade to 2.2 and then install 2.3.3??
Greetings

Yes it is possible to downgrade for 2.3.3 to 2.2(.1 in my case)
I can't remember exactly how I did it, but I basically followed the instructions to install MIUI, but for a 2.2 ROM, so wiping data, system and cache, then flashing a darky ROM (but should work with any tbh)

Dead easy. Just install the Samsung Android 2.3.3 XWJVB ROM (link - http://www.theandroidsoul.com/how-to-install-xwjvb-gingerbread-rom-gaalxy-s/)
But before you install XWJVB, install the EZRom to remove/uninstall the MIUI. It's available in two versions, select the one you want:
Android 2.2 based EZRom - http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/
Android 2.3 based EZRom - http://www.theandroidsoul.com/ezbase-rom-v3-0-full-installation-guide-w-video/
Credits and Thanks to Nitr8 for great EZRoms

All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)

shivajibanerjee said:
All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)
Click to expand...
Click to collapse
+ check bootloader. And use 512 pit.

take a look at the darkys thread There's a complete solution for your problem. Just work the manual down and you'll gain the ultimate gingerbread experience in green Fully with root and deodexed and so on

Thanks a lot guys.. U guys rock...

problem from 2.3.4 to room cooked

hi all,
if i flash the 2.3.4. can i flash after any firmware coocked? I have already flashed it to 2.3.4 and when i try to fash any room coocked i have the phone in black screen and doesn't start. there is some problems about the update related to bootloder update ?

Long story short: if you flash the official 2.3.4 rom (kernel), you lose the option (at least at the moment) to downgrade it.
Since most of the current roms for the Milestone 2 (MIUI and CM7 - both "vanilla" by tezet and ICS themed by endless7) use the older kernel, you can't use them anymore.
You could try MS2Ginger by walter79, which is based on the 2.3.4 kernel (the Chinese one).

djlooka said:
Long story short: if you flash the official 2.3.4 rom (kernel), you lose the option (at least at the moment) to downgrade it.
Since most of the current roms for the Milestone 2 (MIUI and CM7 - both "vanilla" by tezet and ICS themed by endless7) use the older kernel, you can't use them anymore.
You could try MS2Ginger by walter79, which is based on the 2.3.4 kernel (the Chinese one).
Click to expand...
Click to collapse
I have just tried to flash MS2Ginger but at startup the phone stays with saver screen. Now, the
rsd motorola doesn't recognize the phone.
DO you have any solution?
thanks

I'm sorry, I have no clue...

djlooka said:
I'm sorry, I have no clue...
Click to expand...
Click to collapse
i'm not able to flash correctly the MD2 version.

I ve succesfull installed MS2 Ginger 2.0.
You have to restore nandroid backup but dont flash the fixed .fsb and do a complete wipe with the stock recovery !
That 's work !!!

[Q] Steps to upgrade defy from 2.2.2 to ICS

Hi,
I recently bought Defy MB525 mobile and it is under warranty till feb'13.
Below are current specs of my mobile-----
System version: Moto_version.34.3601.7.MB525.Retail.en.SEA15
Firmware version:2.2.2
Kernel Version: 2.6.32.9-g0671d13
Build number: JEM3.4.3-36-1.7
Camera Hardware: SOC
--------------------------------------------------
Please share the steps i should follow for 1) backup existing stock version 2.2.2, 2) overclock CPU, 3) upgrade to latest stable ICS version, 4)restore stock version 2.2.2.
Let me know if you need any other details.
Thanks

hi there
well to backup your stock rom first of all you need to root your phone with superoneclick google it.Then install latest 2nd init form here http://forum.xda-developers.com/showthread.php?t=1032212.after that reboot and when your phone blinks blue push vol down button to get into bootmenu.select custom recovery/backup all(to backup you rom)
3)either you download epsy/quarks ics build http://forum.xda-developers.com/showthread.php?t=1432100 or aopk http://forum.xda-developers.com/showthread.php?t=1585425 and the ics gapps.then move those to sd card and enter bootmenu again select wipe data/cache and install zip from sd card:chose one of the 2 above and the gapps after finish reboot and VOILA ics

How is camera in ICSROM?

camera works fine but panorama fc

Thank you, have some questions again
Thank you very much for replying, i am half journey way to start updating to ICS
i have downloaded epsy CM9-NIGHTLY-120406-Defy.zip, is it right one? is there a stable version?
when to overlock the cpu after installing ICS or can be done before?

I'm not sure if there's a stable CM9 release for Defy.
when to overlock the cpu after installing ICS or can be done before?
Click to expand...
Click to collapse
After the update..

I'm using 06.04 by Epsylon3 with Froyo kernel and green lens: I find it stable enough, good for day to day usage. There's no CM9 stable version, not even a RC one.
You can overclock the CPU from the bootmenu, although CM9 comes with 1GHz standard. Maybe undervolt it a bit.
Trimis de pe Defy CM9

Confused on updating android
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.

Rodefy said:
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Click to expand...
Click to collapse
We need froyo kernel because we have SOC (green) camera ;-(
So we need to flash CM7 kernel too. If you use CM9 kernel, then your SOC camera will not work
Procedures in this thread in the first post
I also had to flash ICS Gapps zip (somehow ommited in the procedure)
You can use mentioned nightly - works fine
I would propose to use titanium backup from the market to backup all your apps with data - then you can simply restore them back with all data inside (but your apps - do not restore system apps)