Hello,
has somone experience with the Adobe Flash Player?
After the installation the browser crashs !?
Mod Version: CM-6.1.1-Spica-a8.3
Ist theit another posibility to get the Flash Player?
Thx for help!!!
Till
Flash 10.1 will never run on Spica as it requires arm v7 and phone has arm v6. You can use FlashLite 9, head over to samdroid.net for details.
gen_scheisskopf said:
Flash 10.1 will never run on Spica as it requires arm v7 and phone has arm v6. You can use FlashLite 9, head over to samdroid.net for details.
Click to expand...
Click to collapse
I did what you recommended, but no funktion :-(
Can you give more details:
a) how did you install previous version?
b) how did you install the one from Samdroid?
gen_scheisskopf said:
Can you give more details:
a) how did you install previous version?
b) how did you install the one from Samdroid?
Click to expand...
Click to collapse
Android 2.2.1
Kernel 2.6.29.6
Mod CM 6.1.1. Spica a 8.3
First I had Eclair Android 2.1 on my phone.
Then I decide to change, cause I red under Android 2.2 Flash would be working.
After the installation of CM, I did whats in the instruction.
I copied both files on the sdcard/root. Then recovery and install the the *.zip.
Reboot. Then I installed the *.apk after the phone is back to normal mode.
Maybe their is no FlashPlayer for CM 6.1.1???
Thx
I can't say for sure, I'm still using Eclair, you have to search Samdroid to get an answer.
I have working FlashLite from Samdroid kitchen (android 2.1).
gen_scheisskopf said:
I can't say for sure, I'm still using Eclair, you have to search Samdroid to get an answer.
I have working FlashLite from Samdroid kitchen (android 2.1).
Click to expand...
Click to collapse
Now I have Eclair too on my Spica, but I see only the sign of flash player. What configuration you have in your phone?
Firmware 2.1-update 1
Basisbandversion i570EXXJD1
Kernel 2.6.29 [email protected] #70
Buildnummer
ECLAIR.XXJH1 / Samdroid 1.3.1.d
Thx
Till
Samdroid 1.3.1d as base, XM STD kernel, qbanin's all2sd, [email protected]
But FlashLite 9 is only usable in browser afaik (works in default and DolphinHD), I couldn't open any .swf file
Related
I'm just checking that the Wildfire can not run Flash 10.1? I just want to be sure that it's not availible and I'm not missing out or anything?
If it's not available is there anyway to run kongregate arcade and other flash games? A browser with flash support like skyfire? (that only works for videos I think?)
non rooted wildfires cannot have flash
If you have rooted you could flash a custom rom which supports flash.
Sorry i cant help about the games I never tried.
So rooted device can handle full flash ? not only flash lite on this processor ?
Well I am rooted and running the Wildpuzzle ROM+OC.
I was under the impression that the device only supports flash lite though? Could someone please correct me if I am wrong. What happenbs if you install flash 10.1 through an apk from a non market source?
as far as i know 10.1 uncompatible, even with custom roms ( i use wildpuzzle v.08)
Sorry guys bad choice of words earlier.
I dont know of any way for flash 10.1
WillKennerley said:
Well I am rooted and running the Wildpuzzle ROM+OC.
I was under the impression that the device only supports flash lite though? Could someone please correct me if I am wrong. What happenbs if you install flash 10.1 through an apk from a non market source?
Click to expand...
Click to collapse
Correct. Flash Lite is all it will support, apart from browsers like Skyfire. Flash cannot be supported on the Wildfire because it doesnt meet the hardware requirements, so, no software "hack" can enable Flash on it. You can try installing the APK from another source, but, your browser will only FC.
Hello, i need to uninstall Miui Gingerbread to install the official Gingerbread, i'm much more used to it, how can i do it?? Already tried to clean up the data and system and tried the Sam's firmaware last gingerbread but it would not worked.. Is it possible to downgrade to 2.2 and then install 2.3.3??
Greetings
Yes it is possible to downgrade for 2.3.3 to 2.2(.1 in my case)
I can't remember exactly how I did it, but I basically followed the instructions to install MIUI, but for a 2.2 ROM, so wiping data, system and cache, then flashing a darky ROM (but should work with any tbh)
Dead easy. Just install the Samsung Android 2.3.3 XWJVB ROM (link - http://www.theandroidsoul.com/how-to-install-xwjvb-gingerbread-rom-gaalxy-s/)
But before you install XWJVB, install the EZRom to remove/uninstall the MIUI. It's available in two versions, select the one you want:
Android 2.2 based EZRom - http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/
Android 2.3 based EZRom - http://www.theandroidsoul.com/ezbase-rom-v3-0-full-installation-guide-w-video/
Credits and Thanks to Nitr8 for great EZRoms
All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)
shivajibanerjee said:
All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)
Click to expand...
Click to collapse
+ check bootloader. And use 512 pit.
take a look at the darkys thread There's a complete solution for your problem. Just work the manual down and you'll gain the ultimate gingerbread experience in green Fully with root and deodexed and so on
Thanks a lot guys.. U guys rock...
Hello everybody,
I'm trying to install a custom rom on a phone of a friend, an xperia x10i
I tried several rom, but the only one the seems to work is the MIUI rom, that unfortunately does not have any support for the camera...
I tried all the roms I found here, but except for the MIUI rom, all the other get stuck at the beginning, when the logo "sony ericcson appears.
Does anyone have any idea or suggestion?
Thank you very much
depends what your baseband is
do you follow the instructions?some need wiping before boot
try new miui.it has full working cam and extra swap ram.i just dont want my Android to look like
icrap.try this link
http://www.xperiax10.net/2011/08/12/tripnmiui-now-officially-on-the-miuiandroid-forums/
I want to port it on Lg optimus one, but i am not expert
josephnero said:
do you follow the instructions?some need wiping before boot
try new miui.it has full working cam and extra swap ram.i just dont want my Android to look like
icrap.try this link
http://www.xperiax10.net/2011/08/12/tripnmiui-now-officially-on-the-miuiandroid-forums/
Click to expand...
Click to collapse
that isn't what he's asking...
he's asking why only the miui rom will work.
I assume it is because he is trying gb roms with the wrong baseband and kernel
flash 2.3.3 stock rom via flashtool
then root it
then install xrecovery..
then any rom u like download and flash via
xrecovery.....
flash tool :- http://forum.xda-developers.com/showthread.php?t=920746
(PLZ DOWNLOAD THE LATEST FlashTool version 0.3.0.0)
Rooting and Installing Xrecovery :-
http://forum.xda-developers.com/showthread.php?t=1196808
(thanx to DooMLoRD)
some roms 2.3.3
http://forum.xda-developers.com/showthread.php?t=1192988
(WB-XPERIA TW Gingerbread)
http://forum.xda-developers.com/showthread.php?t=1222919
( FreeXperia Achotjan ARC_2.3.5)
http://forum.xda-developers.com/showthread.php?t=1213843
( CM7-ZMOD| 003 | Cyanogenmod 7 | 2.3.3)
Thank you very much for the help...
I'm running the last MIUI rom, but the camera is still not working :/
When I try to take a picture just crash it....
How do I know which baseband I'm using and which kernel I need?
Thank you in advance
The last Trip's Rom with .71 baseband is fully working (camera too)
http://android.modaco.com/topic/344807-rom-18-08-tripnmiui-iris-103235ub71/
Hi all
I want to install CM7 ROM on my Stock Defy (Android 2.2) and have a doubt about when to flash a SBF file and what is the relation between Android and Kernel versions.
First, let's take a look of this table from wikipedia [1]:
Android Version-------------------Kernel
------2.1.x------------------------2.6.29
------2.2.x------------------------2.6.32
------2.3.x------------------------2.6.35
......
------4.0.x-------------------------3.0.1
I look in many forums on how to install cyanogenmod and they say that I have to flash Nordic SBF and so on. So far I understand that one onlye have to flash a sbf file when it's making an update from 2.1 to 2.2 (Android versions) but I don't understand why updating from 2.2.x to 2.3.x doesn't require that (look on cyanogenmod guide to install it --it says nothing about flashing sbf-- [2])
Cyanogenmod 7.1 says that it's Android 2.3.7 but the kernel stays at 2.26.32.x and in the table says that Android 2.3.x 'needs??' kernel version 2.26.35.x, so I want to know these things:
1. Is the Android version hard linked to a kernel version or is possible that you have Android 2.3.7 and Kernel 2.26.32.x installed
2. If 1 is false, is Cyanogenmod really Android 2.3.7??
3. When you are installing a custom ROM, when you HAVE to flash a SBF file into your device? Only when you are updating kernel? or in wich cases one have to flash it?
I hope I was clear with my question and you can help me with that.
Thanks in advance
[1] en,wikipedia,org/wiki/Android_version_history
[2] wiki,cyanogenmod,com/wiki/Motorola_Defy:_Full_Update_Guide
(replace ',' by '.' on URL's, sorry but I'm a newbie)
Hi,
I recently bought Defy MB525 mobile and it is under warranty till feb'13.
Below are current specs of my mobile-----
System version: Moto_version.34.3601.7.MB525.Retail.en.SEA15
Firmware version:2.2.2
Kernel Version: 2.6.32.9-g0671d13
Build number: JEM3.4.3-36-1.7
Camera Hardware: SOC
--------------------------------------------------
Please share the steps i should follow for 1) backup existing stock version 2.2.2, 2) overclock CPU, 3) upgrade to latest stable ICS version, 4)restore stock version 2.2.2.
Let me know if you need any other details.
Thanks
hi there
well to backup your stock rom first of all you need to root your phone with superoneclick google it.Then install latest 2nd init form here http://forum.xda-developers.com/showthread.php?t=1032212.after that reboot and when your phone blinks blue push vol down button to get into bootmenu.select custom recovery/backup all(to backup you rom)
3)either you download epsy/quarks ics build http://forum.xda-developers.com/showthread.php?t=1432100 or aopk http://forum.xda-developers.com/showthread.php?t=1585425 and the ics gapps.then move those to sd card and enter bootmenu again select wipe data/cache and install zip from sd card:chose one of the 2 above and the gapps after finish reboot and VOILA ics
How is camera in ICSROM?
camera works fine but panorama fc
Thank you, have some questions again
Thank you very much for replying, i am half journey way to start updating to ICS
i have downloaded epsy CM9-NIGHTLY-120406-Defy.zip, is it right one? is there a stable version?
when to overlock the cpu after installing ICS or can be done before?
I'm not sure if there's a stable CM9 release for Defy.
when to overlock the cpu after installing ICS or can be done before?
Click to expand...
Click to collapse
After the update..
I'm using 06.04 by Epsylon3 with Froyo kernel and green lens: I find it stable enough, good for day to day usage. There's no CM9 stable version, not even a RC one.
You can overclock the CPU from the bootmenu, although CM9 comes with 1GHz standard. Maybe undervolt it a bit.
Trimis de pe Defy CM9
Confused on updating android
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Rodefy said:
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Click to expand...
Click to collapse
We need froyo kernel because we have SOC (green) camera ;-(
So we need to flash CM7 kernel too. If you use CM9 kernel, then your SOC camera will not work
Procedures in this thread in the first post
I also had to flash ICS Gapps zip (somehow ommited in the procedure)
You can use mentioned nightly - works fine
I would propose to use titanium backup from the market to backup all your apps with data - then you can simply restore them back with all data inside (but your apps - do not restore system apps)