I have a problem with my Xperia X2 when i tilt the device to see the upper limit of the screen (which lies prior to 3g camera) while the screen lights ,there is leakage of light above the display as the display not settled in its place well...
Any one have this problem also??
Please any one have X2 just examine it and tell me?
That's to know if i can return it on guarantee...
Hi!
I can see some light in the area you describe, but only when I tilt the phone so that the viewing angle is about 15-20 degrees. It has never bothered me.
Thanks Prydplante for reply, but is this light more near 3g camera or near the sensor or equal through the upper limit of the screen?
Any one can answer me?
That's to know if i can return it on guarantee...
Is this light leakage more near 3g camera or near the sensor or equal through the upper limit of the screen?
No one have X2!!!
Hi!
When I tilt it from 90 to 0 degrees viewing angle I first start to see the light at the 3G camera-side. This happens at about 15 degrees. When tilt it further I also see the light in a small area under the "S" in Sony Ericsson, at about 10 degrees. Tilting it further I can see a little light along the whole upper edge of the display. But this is not important to me.
Really thanks Prydplante for reply and hoping more efficient build quality from Sony Ericsson in next windows phone mobile...
Related
Well this could be really e serious problem:
using my X7500 I noticed the display light level decreasing a little bit. I supposed it could be a wrong impression of mine. So I tried to push the upper side of metal case and I noticed the light coming up. Then I made a little pression on the same edge (near HTC brand as well the lower opposite side) and the light decreased again.
I assume there must be a problem with led position under metal cover. It's eneogh a little pression to have problem with light display. Maybe it could depend on "shock" due to the keyboard hook-up that could damage led connector inside...
Please help and tell me if you have noticed same problem...
Please any suggestions for this problem?
asci said:
Please any suggestions for this problem?
Click to expand...
Click to collapse
Sorry asci - not come across this problem with my Ameo.
Hi...
try to make a little pression under jog dial button...around that area and notice if something happen with brightnes.
Thank you for your courtesy.
asci said:
Hi...
try to make a little pression under jog dial button...around that area and notice if something happen with brightnes.
Thank you for your courtesy.
Click to expand...
Click to collapse
Tried the suggestion you made but no problems here either asci. Maybe your unit is faulty. Try returning it due to electrical shortage or something similar. It certainly does not sound normal.
asci said:
Hi...
try to make a little pression under jog dial button...around that area and notice if something happen with brightnes.
Thank you for your courtesy.
Click to expand...
Click to collapse
Yeah, tried that - absolutely nothing happening.
I turned it back to assistence...it seems to be an isolated case, and they could tell me when I'll have it back.
HTC customer care: bad assistence:
1. they didn't solve my problem yet;
2. they didn't answer to my mail.
I purchased an HTC X7500 on 21.05.2007. After two days it immediately showed some problems related to LCD display. In fact on making a light pressure all around display metal case, especially near the hardware buttons on left side, the LCD background light became weak as it loosed brightness.
I brought it immediately to a technical customer care for reparation. After two weeks it returned back but the problem related to display brightness still persist.
1. The backlight is weak and display is not so bright and not stable too as the very first time I tested it. Now when I connect 4 in 1 cable or mini USB one, and some time even when a set stylus in its lodging, by doing some little movement of the cables connected or of the stylus in its lodging, the backlight display increases to its normal brightness level for while after that it turns itself weak so that display colors appear not vivid and with a lack of brightness. Before testing it I verified that all backlight levels were set on maximum level with any power option.
2. When I browse through menu icons and select them (without launching application) their appearance is not stable and it seem to flicker.
3. If I set a white background on display it seems to be completely crossed by horizontal stripes and its appearance (color and brightness) is poor.
So today I had to come back to HTC customer care point to leave it for the second time in twenty day.
I would like to point out that I am a professional user and I’m really disappointed about it. I had to bring my device to a technical assistance point twice and the first time, I had it back not repaired.
Considering that, and also considering its high price and that it came with original unmistakable manufacturing faults, I am asking to HTC for a replacement of the device with another X7500 perfectly working.
Best Regards.
asci said:
HTC customer care: bad assistence:
1. they didn't solve my problem yet;
2. they didn't answer to my mail.
I purchased an HTC X7500 on 21.05.2007. After two days it immediately showed some problems related to LCD display. In fact on making a light pressure all around display metal case, especially near the hardware buttons on left side, the LCD background light became weak as it loosed brightness.
I brought it immediately to a technical customer care for reparation. After two weeks it returned back but the problem related to display brightness still persist.
1. The backlight is weak and display is not so bright and not stable too as the very first time I tested it. Now when I connect 4 in 1 cable or mini USB one, and some time even when a set stylus in its lodging, by doing some little movement of the cables connected or of the stylus in its lodging, the backlight display increases to its normal brightness level for while after that it turns itself weak so that display colors appear not vivid and with a lack of brightness. Before testing it I verified that all backlight levels were set on maximum level with any power option.
2. When I browse through menu icons and select them (without launching application) their appearance is not stable and it seem to flicker.
3. If I set a white background on display it seems to be completely crossed by horizontal stripes and its appearance (color and brightness) is poor.
So today I had to come back to HTC customer care point to leave it for the second time in twenty day.
I would like to point out that I am a professional user and I’m really disappointed about it. I had to bring my device to a technical assistance point twice and the first time, I had it back not repaired.
Considering that, and also considering its high price and that it came with original unmistakable manufacturing faults, I am asking to HTC for a replacement of the device with another X7500 perfectly working.
Best Regards.
Click to expand...
Click to collapse
Good luck and let us know how it turns out. I hope HTC doesn't become so big that they stop listening and taking care of their customer. I would hate to look for another high end phone manufacturer.
Arrived today...replaced.
Hi, I got the X1 about two weeks ago.
I just notice that my screen on the bottom left corner is a bit lifted.(I mean it's firm butthe position of the lcd is not good, it's rotate a bit. )
I also noctice that there's an orange light line down there too.
This orange line is easily visible in the dark room.
It seems like the backlight is leak.
Do you have the same issue?
Could you check yours ?
Do you think it is a defective unit?
Should I get a replacement?
Thanks
Sorry for my poor English.
Jack
Here's the pic.
yup...another problem...
I suggest you should ask for a replacement...
As a fresh owner I have a few questions:
1 - The lower right corner of the front panel wobbles (?), moves slightly on touch, I can press it for about 1mm (see the attached screen). It is especially annoying when pressing OK or dial off (or whatever the button is called). Is it normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticeable light leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Biges said:
As a fresh owner I have a few questions (too lazy to search):
1 - The upper right corner of the front panel is flimsy (?), moves slightly on touch. It is normal?
2 - The screen has a slight green tone (hue), can anything be done with it?
3 - LCD has noticable ligh leaking near the bottom side, again, is it normal? (Well, the screen does not work now anyway, gotta flash the phone.)
Thanks
Click to expand...
Click to collapse
(1) I have no issues with this, seams fine on mine
(2) I cannot notice any hue, maybe you have a faulty unit given the blue colour and the movement of the panel.
(3) Yes LCD light is noticible, I also get leaks through the optical pad when I have the notification LED's on
1. I got some small loose on the front pannel upper area, it's especially felt when You hold the phone in one hand and work with Your thumb pressing the screen or just put the phone to You ear. You feel then the pannel moves a bit down. Maybe thats normal or just the build quality is not so good at all.
sounds like you have a faulty one. mine is solid as a rock. the loose screen and the green hue could be related. there shouldnt be any discolouration at all and i can only see it getting worse to be honest. where did you get it? if its somewhere reputable then id take it back and ask for a decent one while its still in warranty.
i do have tiny bit of light leakage near the buttons, that does seem common.
Mine is well made too, no hardware problems.
I have a silver one, solid as a rock, light leaks are present though...
Hi,
I noticed that in a certain angle, in sunlight - you can see the screen refreshes rates.
Try holding the device in a way that the sun reflects to the sides of the screen (the device should be positioned vertically to the sun light).
Do you see that refreshes too?
Is that normal?
Thanks ahead.
Wow you got super eyes.. lol.. just kidding..
Can you may be explain a bit on the angle to hold.. should the sunlight reflect or something.. so that we can recreate what you are trying to point out..
Sent from my Galaxy S4
Spitniv said:
Hi,
I noticed that in a certain angle, in sunlight - you can see the screen refreshes rates.
Try holding the device in a way that the sun reflects to the sides of the screen (the device should be positioned vertically to the sun light).
Do you see that refreshes too?
Is that normal?
Thanks ahead.
Click to expand...
Click to collapse
So many people sensible about the screen smearing, screen refresh...Do you get hawk eyes? or you work in screen factory? I didn't notice anything anormal. You are so professional.
Hi Guys,
The refreshes appeared couple of times before.
This one happened while i was driving to college (The direction was East and I was using WhatsApp. meaning, bright background app) and the sun light was pretty strong (aroung 7:30 am).
I saw little black lines on the screen (probably because of the angle of the sun).
Did you had any kind of experience? Im not sure im describing it so well :\
Thanks
whatsup guys!
today ive noticed a screen problem,under the screen around the ultrasonic fingerprint scanner ,thers a simbol like box or like battery under the screen and you can only see that on bright light
i upload a photo plz confirm the problem .
is this a new screen gate problem with s10+?
updatek for sure its the ultrasonic fingerprint sensor but why we start to see it under the screen ,will it burn the screen in time so we all see it strong?
bubu23 said:
whatsup guys!
today ive noticed a screen problem,under the screen around the ultrasonic fingerprint scanner ,thers a simbol like box or like battery under the screen and you can only see that on bright light
i upload a photo plz confirm the problem .
is this a new screen gate problem with s10+?
updatek for sure its the ultrasonic fingerprint sensor but why we start to see it under the screen ,will it burn the screen in time so we all see it strong?
Click to expand...
Click to collapse
It's normal
Normal and also present on optical readers too - Saw it on my Mate 20 Pro in bright light. Haven't seen it yet on my S10 Plus but im sure it can be seen.
This is not a issue or "screengate" thing - under screen readers will always been seen there till someone figures a way to hide them.
It's the ultrasonic sensor, it's normal for it to be visible against very intense light, it doesn't influence the viewing quality.
Unlike the Mate 20 Pro and other devices using optical sensors, there will never be a definite burn-in in that area since ultrasonic scanners don't need the display to emit light for a fingerprint to be readable.
I agree it's normal. I can only see it in direct sunlight on a solid background at a angle to purposely see it. It's definitely not the normal way I would use any phone.
thx guys i appreciate it !!! thread close !