Related
Hi everybody. I'm Quistnix and I'm a compulsive tinkerer.
Whenever I get my hands on a new piece of hardware, I just have to fiddle with the software. My iPod Touch has been jailbroken, bricked, unbricked, re-jailbroken, broken, repaired and jailbroken. My pc has been running a lot of different editions of Linux and Windows, and has been screwed even more times when I tried to install those.
To the point: I'v got a HTC Magic (32b) and I'm very happy with it. However, I just had to go and put some custom roms on it. I was kinda overconfident and hopscotched from one guide to the other until I got a result I liked. Unfortunately, the end result turned out to be a phone running Android Dev Phone 1, Firmware 1.6 without any backups to restore to.
In it's current state wifi won't run, I don't have root access, Recovery Flasher returns "Flash FAILED.", Terminal won't give me SU rights and it's one of those 'perfect' devices that don't allow fastboot.
Apart from those issues everything seems to work fine, so if it's going to stay like this I'll still end up with a great and perfectly functional phone. Still, I'd like to ask if there is a way to either get it back to its original state, or to make it run a custom rom.
Any help is greatly appreciated.
Quistnix said:
Hi everybody. I'm Quistnix and I'm a compulsive tinkerer.
Whenever I get my hands on a new piece of hardware, I just have to fiddle with the software. My iPod Touch has been jailbroken, bricked, unbricked, re-jailbroken, broken, repaired and jailbroken. My pc has been running a lot of different editions of Linux and Windows, and has been screwed even more times when I tried to install those.
To the point: I'v got a HTC Magic (32b) and I'm very happy with it. However, I just had to go and put some custom roms on it. I was kinda overconfident and hopscotched from one guide to the other until I got a result I liked. Unfortunately, the end result turned out to be a phone running Android Dev Phone 1, Firmware 1.6 without any backups to restore to.
In it's current state wifi won't run, I don't have root access, Recovery Flasher returns "Flash FAILED.", Terminal won't give me SU rights and it's one of those 'perfect' devices that don't allow fastboot.
Apart from those issues everything seems to work fine, so if it's going to stay like this I'll still end up with a great and perfectly functional phone. Still, I'd like to ask if there is a way to either get it back to its original state, or to make it run a custom rom.
Any help is greatly appreciated.
Click to expand...
Click to collapse
have a look at the numerous threads on how to replace the perfect SPL with goldcard method. once you're done with that, replace the recovery, choose a rom and flash.
nmesisca said:
have a look at the numerous threads on how to replace the perfect SPL with goldcard method. once you're done with that, replace the recovery, choose a rom and flash.
Click to expand...
Click to collapse
Thanks a lot, I'll give it a shot tonight
In case somebody else stumbles upon this thread with the same problem:
Using Jester's guide I created a goldcard, and Amon's guide helped me to un-perfect it. After that I could one-click-root without trouble.
I'm currently using the build installed by the ROM v2.16.707.3 from Amon's guide, and it's great.
The only problem left is that I tried to install Amon's [ROM] [32A & 32B] [10-Oct-2009] RAv1.6.2 and got stuck with a never-ending boot screen. This was easily reverted with a backup. I´m going to try installing another rom soon, to see if that helps.
the reason you got stuck in a boot loop is because you didnt wipe your ext partition. you can do that using amon ra's newest recovery. easy peasy lemon squeezy. you need to wipe whenever you flash a new hero rom or any other now now-a-days. do you have adb set up?
edit: Never mind, it's all running beautifully. Thanks!
I just tried flashing the Gingerbreadime.zip and followed the directions to the letter and I experienced my first soft brick. The phone went into a boot loop at the mytouch screen. Luckily I was able to go into Recovery and restored the backup I had made after rooting and turning s=off. It appears to have restored okay as I still have root etc. Does anyone have any idea how or why this happened ? This zip was posted in Droid-Life and was advertised as good for all android 2.2 devices. I have never used adb but have it set up on my phone so I guess I had better get more familiar with it. I have flashed my Vibrant numerous times using Odin and Rom manager but I don't believe that there is a similar program for the Mt4g (Odin that is) I guess I have been spoiled by my Vibrant as it seems to have more options to recover with and are easier to use from what I can tell. I do love this MT4g though It is probably the best all around phone I have ever owned. Any and all info and help is greatly appreciated.:
to my knowledge there has been no gingerbread port for our device yet. Your lucky you didn't brick your device.
tenbeau said:
I just tried flashing the Gingerbreadime.zip and followed the directions to the letter and I experienced my first soft brick. The phone went into a boot loop at the mytouch screen. Luckily I was able to go into Recovery and restored the backup I had made after rooting and turning s=off. It appears to have restored okay as I still have root etc. Does anyone have any idea how or why this happened ? This zip was posted in Droid-Life and was advertised as good for all android 2.2 devices. I have never used adb but have it set up on my phone so I guess I had better get more familiar with it. I have flashed my Vibrant numerous times using Odin and Rom manager but I don't believe that there is a similar program for the Mt4g (Odin that is) I guess I have been spoiled by my Vibrant as it seems to have more options to recover with and are easier to use from what I can tell. I do love this MT4g though It is probably the best all around phone I have ever owned. Any and all info and help is greatly appreciated.:
Click to expand...
Click to collapse
There are people experiencing the same thing in the Nexus forum. Personally I would stay away from anything that is not specifically built for this phone as its a completely different OS than Vanilla or Moto Droid or etc. etc.
bobsbbq said:
to my knowledge there has been no gingerbread port for our device yet. Your lucky you didn't brick your device.
Click to expand...
Click to collapse
yes I a sure am. I trusted the Dorid-Life site and should not have. Thanks for the swift response...
setzer715 said:
There are people experiencing the same thing in the Nexus forum. Personally I would stay away from anything that is not specifically built for this phone as its a completely different OS than Vanilla or Moto Droid or etc. etc.
Click to expand...
Click to collapse
I sure intend to and I should have got on this forum before I even attempted to flash it. Right now everything seems fine except I cannot get into recovery only clockworkimode recovery. I am holding down the volume down button and pressing the power button at the same time and the device just reboots. Any ideas and what could be causing that? I am embarassed to say that my ignorance that pushed me to flash that zip is probably at the root of it. Any steps that I can take to enable me to get into stock recovery to check and make sure S=off?
Edit: Just pulled battery and sim card and than put them back in and the device went into stock recovery and s=off so I hope that all is okay and I did not create some ghosts that will show up when I attempt to flash a rom later on.
Please post questions in Q&A section.
I did the same thing. I flashed the .zip file from droid life forum and got a success message when I installed it through recovery and mine never bootlooped. I didn't get the gingerbread keyboard but it didn't bootloop either
Sent from my HTC Glacier using XDA App
tenbeau said:
I sure intend to and I should have got on this forum before I even attempted to flash it. Right now everything seems fine except I cannot get into recovery only clockworkimode recovery. I am holding down the volume down button and pressing the power button at the same time and the device just reboots. Any ideas and what could be causing that? I am embarassed to say that my ignorance that pushed me to flash that zip is probably at the root of it. Any steps that I can take to enable me to get into stock recovery to check and make sure S=off?
Edit: Just pulled battery and sim card and than put them back in and the device went into stock recovery and s=off so I hope that all is okay and I did not create some ghosts that will show up when I attempt to flash a rom later on.
Click to expand...
Click to collapse
I think you mean bootloader? You only have 1 recovery. If you flashed clockwork you no longer have stock recovery. Vol Down + Pwr gets you to bootloader or SPL where it shows S=off.
I did not flash the zip (sounds like an overkill to flash a zip for new KB). I ADB pushed both files and got a FC on multi-touch KB... oh well, I like HTC_IME better anyway
tenbeau said:
I sure intend to and I should have got on this forum before I even attempted to flash it. Right now everything seems fine except I cannot get into recovery only clockworkimode recovery. I am holding down the volume down button and pressing the power button at the same time and the device just reboots. Any ideas and what could be causing that? I am embarassed to say that my ignorance that pushed me to flash that zip is probably at the root of it. Any steps that I can take to enable me to get into stock recovery to check and make sure S=off?
Edit: Just pulled battery and sim card and than put them back in and the device went into stock recovery and s=off so I hope that all is okay and I did not create some ghosts that will show up when I attempt to flash a rom later on.
Click to expand...
Click to collapse
make sure fastboot is checked off otherwise you cant get into the bootloader. to make sure it is off go to: menu, settings, applications and uncheck fastboot. you're good to go then. to get into recovery, you can do it thru bootloader or by opening up rom manager and clicking on the "reboot to recovery" option
setzer715 said:
There are people experiencing the same thing in the Nexus forum. Personally I would stay away from anything that is not specifically built for this phone as its a completely different OS than Vanilla or Moto Droid or etc. etc.
Click to expand...
Click to collapse
the website was not specific enough. the port at the current moment is for motorola droid devices. they should have been more specific instead of saying any rooted 2.2 android phone. even if you do get it on your phone, its only going to force close every time you try and type something. thats what happened to me, so after about 24 hours i said **** it and removed it. swype in my opinion is better anyway. im trying to port the g2 swype to our phone so we can have a swype with a mic on the keyboard. oddly, ours didnt come with one.
Okay, so I have rooted my Droid eris several times and have downloaded and installed kaosfroyo, vanilla, and plain Jane. I have reverted back to the "stock" Rom with this program on the computer. I have clockwork mod on this because i have seen this name in the text while it installed. So now I think I'm on the stock but I'm not fully sure. I want to unroot this phone completely and make it back to how it was when you would open up a brand new box. Then i was to go through and install the, in your opinion, the best rom out there. Now for the probem, when I go to install a new Rom, I turn off the phone completely, hold down volume down and end buttons, then when the menu comes up I push up on the volume button and i get the picture of an Eris with a red triangle and an exclamation point. That disables me from doing anything. It does the same thing when I turn the phone off and hold volume up with the end button. To fix it, I just turn off the phone and let it boot up normal. Is there any fix for this? Please keep in mind that i am a super dummy when it comes to this stuff so I don't fully understand the technical terms and would appreciate explanations.
Thank you so much for your time and help.
Time To Shine said:
Okay, so I have rooted my Droid eris several times and have downloaded and installed kaosfroyo, vanilla, and plain Jane. I have reverted back to the "stock" Rom with this program on the computer. I have clockwork mod on this because i have seen this name in the text while it installed. So now I think I'm on the stock but I'm not fully sure. I want to unroot this phone completely and make it back to how it was when you would open up a brand new box. Then i was to go through and install the, in your opinion, the best rom out there. Now for the probem, when I go to install a new Rom, I turn off the phone completely, hold down volume down and end buttons, then when the menu comes up I push up on the volume button and i get the picture of an Eris with a red triangle and an exclamation point. That disables me from doing anything. It does the same thing when I turn the phone off and hold volume up with the end button. To fix it, I just turn off the phone and let it boot up normal. Is there any fix for this? Please keep in mind that i am a super dummy when it comes to this stuff so I don't fully understand the technical terms and would appreciate explanations.
Thank you so much for your time and help.
Click to expand...
Click to collapse
By program on the computer do you mean you ran the ruu from verizon to put the stock software back on the phone? If that's the case I beleive you have probably unrooted the phone and will need to re root. I may be wrong but I think the ruu also flashes the original recovery which is why your not able to boot into it.
Conap said:
By program on the computer do you mean you ran the ruu from verizon to put the stock software back on the phone? If that's the case I beleive you have probably unrooted the phone and will need to re root. I may be wrong but I think the ruu also flashes the original recovery which is why your not able to boot into it.
Click to expand...
Click to collapse
I would assume that's what it was. I know it is rooted now because i went through this process to root it after i ran tht program. I don't remember what one it was specifically however i know it had a progress bar on the top right while it installed and had the screen of holding down volume and end button to turn on the phone.
if you are rooted then under your program list you should have superuser permissions icon .. if you dont then you may still be rooted but not likely .. if you do not see that, you can simply go to the market and download a program for root users only and if it doesnt work on your phone then you know you are not rooted .. happy hunting
duccicucci said:
if you are rooted then under your program list you should have superuser permissions icon .. if you dont then you may still be rooted but not likely .. if you do not see that, you can simply go to the market and download a program for root users only and if it doesnt work on your phone then you know you are not rooted .. happy hunting
Click to expand...
Click to collapse
Even if you re rooted afterwards you may need to reinstall recovery...i reccomend you use amons recovery. You can find directions in one of the how-to root threads around here.
problm solved
*Now Working for 4.3 Update* Will require an up-to-date install of 4.1.x first and then after re-boot, it will update to 4.3 (read post on next page).
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here https://www.dropbox.com/s/9wbux6a4kn0ndz9/StockRecovery-signed.zip
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
jay_ntwr said:
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here http://www.androidrevolution.nl/downloader/download.php?file=Flash_recovery_2.17.401.1.rar
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
Click to expand...
Click to collapse
I appreciate you writing this up. It seems like I've never been able to find a good solution to installing the OTA updates post-root. That being said, do you have any idea what happened in Step 7 that made it finally work? I just don't understand how doing the same thing over and over finally just worked. I want to try installing an update, but I'm a little nervous to do it. And I don't know how else to make the pesky update notification go away without installing it.
trickinit said:
I appreciate you writing this up. It seems like I've never been able to find a good solution to installing the OTA updates post-root. That being said, do you have any idea what happened in Step 7 that made it finally work? I just don't understand how doing the same thing over and over finally just worked. I want to try installing an update, but I'm a little nervous to do it. And I don't know how else to make the pesky update notification go away without installing it.
Click to expand...
Click to collapse
I really have no idea why Step 7 got so strange. The only thing that gave me a warm fuzzy whatsoever was that others were reporting that it was hanging and they just rebooted the phone over and over until it got all the way through the process. It could have something to do with the stock recovery for all I know--a bug perhaps. Again, it made me nervous and I won't do it again. I only did the write up so folks could see what happens and make a call whether or not they wanted to try it themselves and see the steps all on one page instead of getting stuck like I did and then finding the rest of the steps. That part sucked. At least you'll know what you're getting into though. Good luck one way or the other. Please post up if you do go through with it and what your results are.
Thank you for the info! Does sound like an awful lot of work though
jay_ntwr said:
I really have no idea why Step 7 got so strange. The only thing that gave me a warm fuzzy whatsoever was that others were reporting that it was hanging and they just rebooted the phone over and over until it got all the way through the process. It could have something to do with the stock recovery for all I know--a bug perhaps. Again, it made me nervous and I won't do it again. I only did the write up so folks could see what happens and make a call whether or not they wanted to try it themselves and see the steps all on one page instead of getting stuck like I did and then finding the rest of the steps. That part sucked. At least you'll know what you're getting into though. Good luck one way or the other. Please post up if you do go through with it and what your results are.
Click to expand...
Click to collapse
I'm thinking I'll give it a go. I'll do a nandroid backup and store it on my pc. Worst case scenario, I'll just start over from scratch, re-root, and restore my backup. I'll make sure to report my results.
I just makes me wonder why bother using the OTA update if you already went through rooting and flashing custom recovery? It's just one step more to flash the custom ROM and at least you will get constant updates with the developer who created the custom ROM. To me it seems like you either stay stock if you want OTA updates or go the whole hog and use custom ROMs. Just my 2 cents.
shadowboy23 said:
I just makes me wonder why bother using the OTA update if you already went through rooting and flashing custom recovery?
Click to expand...
Click to collapse
Well, in my case, I purchased the Dev edition straight from HTC so I automatically have a de-bloated OS from HTC instead of the ATT ROM that I would have gotten had I purchased the phone from the ATT Store. In that case, I'd no question have a custom ROM from the forum. I just didn't see the need this time around. I would have left the stock recovery, but I do like to make backups so ClockworkMod is something I can't live without. I suppose there are others in that same boat but they are probably few and far between. Really, I just hate to update my ROM since the phone is working how I want at the moment. It's hard to justify just blowing away a functioning OS, setting up everything again, etc. but I may do it again if the OTAs come frequently and/or the process is as strange as it was this past go around.
jay_ntwr said:
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here http://www.androidrevolution.nl/downloader/download.php?file=Flash_recovery_2.17.401.1.rar
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
Click to expand...
Click to collapse
hi,
one question. this recovery.img i also can use for my htc one 802w? i use the original rom (4.1.2) on my htc one. i make s-off over htcdev.com install cwm802w.img . i become the info the system update to 4.2.2 is available but the phone cant install the update.
any people like help me?
best regards,
ps: sorry for my bad english
Does sound like an awful lot of work though
greengoose_at said:
hi,
one question. this recovery.img i also can use for my htc one 802w? i use the original rom (4.1.2) on my htc one. i make s-off over htcdev.com install cwm802w.img . i become the info the system update to 4.2.2 is available but the phone cant install the update.
any people like help me?
best regards,
ps: sorry for my bad english
Click to expand...
Click to collapse
Just find a stock recovery for 802w, flash it to your phone and you should be fine to to OTA. The original post didn't mention if he's using 802w. If he's not, then the recovery.img can't be used for 802w.
How to get s_off , supercid 11111111
and return to s_on with supercid ?please tell me quickly
Thanks for all friends
Sent from my HTC One using xda premium
Sent from my HTC One using xda premium
I haven't been able to get this to work. I flashed back to the stock recovery, but when I attempt to install the update it gets about half way through before rebooting. It goes back into recovery, starts installing again, but then stops and just shows a red triangle with an exclamation mark. I can get the phone to reboot by holding the power button for 10 seconds, which boots it up normally. When it gets up and running, it's like nothing ever happened, but then the update notification reappears.
trickinit said:
I haven't been able to get this to work. I flashed back to the stock recovery, but when I attempt to install the update it gets about half way through before rebooting. It goes back into recovery, starts installing again, but then stops and just shows a red triangle with an exclamation mark. I can get the phone to reboot by holding the power button for 10 seconds, which boots it up normally. When it gets up and running, it's like nothing ever happened, but then the update notification reappears.
Click to expand...
Click to collapse
I'm experiencing the same thing, can't seem to find anything about it...
With the new 4.3 rolling out on the Dev editions, I decided it was time to try this again. What I found was I had to update to a something prior to the new 4.3. In other words, it was still one of the 1.29 streams that updated first and did just like the last time I did this. The thing stopped, locked up, had to hold the power button down, locked up again, reset again, then it was fine. As soon as the phone booted, the 4.3 update was available and I installed that without any issues. So, the method above still works and even with the weirdness I felt a little better this go around.
Good luck.
sunnyyen said:
Just find a stock recovery for 802w, flash it to your phone and you should be fine to to OTA. The original post didn't mention if he's using 802w. If he's not, then the recovery.img can't be used for 802w.
Click to expand...
Click to collapse
I haven't really checked this thread in weeks. I'm not sure what an 802w is. If you can clarify, I'll check and post.
Totally ran just fine
I had to as stated roll back to the attached recovery, did that with fastboot and no problems, then restarted the phone, then had it start the OTA update, then read around debating if I want CWM or TeamWin, but before I notice, the progress bar got up past half way. Looked away for what must've been less than 5 minutes until it vibrated and was restarting itself. It restarted again, and then it loaded and updated all the apps... Seemed like the smoothest rooted update I've ever done, no forced restarting or anything!
I just bought my HTC One last friday, and I think I screwed up things a little bit, because the first thing I did after I charged it, was updating everything to 4.3, before unlocking the bootloader, getting s-off and before rooting the phone. So I ended up with the latest 4.3 on my phone, but it was a pain in the ass to root it properly. I was able to unlock the bootloader, but something must be different with the way 4.3 treats the internal storage distribution, because I was only able to get root, using TWRP and the latest version of SuperSu, but I wasn´t able to install Busybox.
It's a little bit weird, because although I was able to use Titaniumbackup to install some apps, apps like OTA Rootkeeper don't work properly. I also lost the stock calculator, flashlight and voice recorder, but I was able to install older versions again.
I think the only thing I regret is not getting s-off first, but I think this will only mean that I will have to wait for a revone update, or I will have to flash the boot.img after flashing a custom rom as I always did with my One X.
jay_ntwr said:
I haven't really checked this thread in weeks. I'm not sure what an 802w is. If you can clarify, I'll check and post.
Click to expand...
Click to collapse
802w is Chinese dual sim version with different radio frequency
Sent from my HTC One dual sim using xda app-developers app
deepforest said:
802w is Chinese dual sim version with different radio frequency
Sent from my HTC One dual sim using xda app-developers app
Click to expand...
Click to collapse
That is not the one I have then.
I have a rooted HTC one with stock rom. I relock the bootloader and I also have stock recovery.
I am on 4.19.401.5 version.
So, will it be possible for me to have new OTA update including Sense 6?
Should I install the missing applications also, like calculator and flashlight?
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie