Related
I've got cyanogen's optimized 1.5r2v3.4, and Recovery Image v1.2. I have read half a dozen threads on how to get your phone back to stock, including this one http://forum.xda-developers.com/showthread.php?t=491350, but I have a unique impediment.
The screen on my fiance's brand new phone completely stopped working after less than a week. I can only interact with the phone via adb connected to the recovery shell, so I have to be absolutely sure it goes perfectly the first time (since the odds of having a working recovery shell after a bad flash are slim). I have not changed the second splash screen, so by what I read, all I need to flash back are the SPL, then the DREAIMG.nbh, correct?
How do I do update.zip for flashing the SPL via the recovery console? I had no problems getting the phone from stock to rooted, followed the instructions step by step. But now that I have to try and figure out how to do EVERYTHING via adb ONLY, I read the most simple instructions and find myself going 'wait, what?', trying to figure out how that would work done entirely without being able to see feedback on the phone screen.
Use the DREAIMG.nbh and recovery.img for rc29 stock its in the rooting thread.......load up the phone in fastboot (camera and power button) the phone will recognize the files and tell u to hit a button....you hit that whopping one button and wait 2 minutes and you'll be back to stock rc29 where then you can reroot or just sit around waiting for Over the air updates from t-mobile to catch u up to cupcake.....honestly i don't use fastboot EVER but i always keep those two files on my sdcard so if i have a problem i just run it and blast back to rc29 and start over......hope u see this before its closed in 5 seconds for not using the SEARCH BUTTON
sorry just use just reread ur post...use the DREAIMG.nbh it has the old SPL built into it
i'm not sure how this would be done, but what iwould suggest is put the original SPL on the SD card as update.zip and the DREAIMG.nbh on the sd in the root of the sdcard, then reboot holding home, give teh phone 5 minutes to boot into recovery then press alt+S wait 10 or more minutes to let it flash and then press home and back to reboot, or in adb shell type reboot bootloader, give it a minute or so and then press power, wait 30 minutes and hit the trackball, if after hitting the trackball the phone vibrates then it went fine, if not then the .nbh didn't flash
tubaking182 said:
i'm not sure how this would be done, but what i would suggest is...
Click to expand...
Click to collapse
Yeah, that sounds like a plan. Thanks, I just really couldn't get my head around how I could possibly do this!
Can I ask why you are bothering? Are you afraid they will hit you with an out-of-warranty fee because it's rooted? They won't, I've returned a first gen G1 that had the issue of the screens ribbon cable coming unplugged (sounds like your problem) and T-Mobile sent us a new one no problem.
GenericNode said:
Are you afraid they will hit you with an out-of-warranty fee because it's rooted?
Click to expand...
Click to collapse
Yeah, actually. *shrug* it doesn't seem to have flashed back to the stock image anyway, so I guess it'll have to go back in whatever form it's in. Hopefully you're right and they don't care about custom images.
heldc said:
Hopefully you're right and they don't care about custom images.
Click to expand...
Click to collapse
They sure didn't care about mine.
And besides, whether or not your phone is rooted isn't in the check-list of questions a CSR is supposed to ask before accepting a return, so how could it be your fault?
Actually they asked me repeatedly if i botched rooting my phone, i kept asking what that meant and they moved on after the third or fourth time they asked(which i found odd since the demo phone in my t-mo store is rooted and running dude 1.2). as long as it doesn't have a custom splash screen it should be ok.
also you could always grap the OTA update and edit it in some way(resize a pic and put it back) and then resign with testkeys and rename update.zip then the only thing they'll see if they really look at the phone is a bootloader that's been changed and recovery, but the rest will look like their stuff.
tethering caused double post sorry
tubaking182 said:
Actually they asked me repeatedly if i botched rooting my phone, i kept asking what that meant and they moved on after the third or fourth time they asked
Click to expand...
Click to collapse
No way. Sweet. I haven't seen this policy yet, but I never pay attention
yeah well, i have had enough experience rooting and un-rooting to the point that i decided that when my replacement arrived i rooted it with my eyes closed, i had all the needed files on my sd card and comp so i used adb install and memorized the steps. only took an hour to do. the thing i hate when i am on the phone with them is when they ask me to reboot/pull battery/wipe when i tell them i tried all that and then i called.
tubaking182 said:
yeah well, i have had enough experience rooting and un-rooting to the point that i decided that when my replacement arrived i rooted it with my eyes closed, i had all the needed files on my sd card and comp so i used adb install and memorized the steps. only took an hour to do. the thing i hate when i am on the phone with them is when they ask me to reboot/pull battery/wipe when i tell them i tried all that and then i called.
Click to expand...
Click to collapse
When you talk to those people you have to sound as newbish as possible, that's probably why they kept asking if you rooted it.
trust me i sound like a freaking idiot. "they told me on the t-mobile forums to press the homekey and turn the phone on and i got a triangle with an exclamatioin point, and then i pressed alt+w and after a few seconds my phone rebooted but the screen is always sideways when i open apps." i act like an idiot and they replace it. the only problem i had was when the guy asked what my favorite thing about the phone is, right after i told him i didn't know what root was. i just said games cause that's all i could come up with
Hello all,
I think I may have bricked my nexus one. It is completely my fault for attempting things that I knew little about, so flame away But after the flaming, if anyone is willing to help I would be sooooo thankfull...
I successfully rooted my phone following the instructions on this page: (all links edited with a double asterisk as I don't believe I can post links)
h**p://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/
Then successfully installed cyanogenmod (which is awesome!) following this page:
h**p://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
All was well, I even got the modaco desire rom up and running, and was happily switching back and forth using the recovery screen. I had nand backups for specific setups, etc.
Then I decided it would be good to know how to go back to stock, and found this page:
h**p://**w.androidspin.com/2010/05/06/guide-unrooting-your-nexus-one-its-like-it-never-happened-almost/
I followed the instructions to the letter (I think) except for erasing userdata (it said "failed: remote not allowed"). I thought that things would be ok, since I'd recently wiped, so I followed the page till the end.
The phone rebooted, and I got the original nexus boot animation - but it's in an endless loop! What's worse, it that now when I try to go to the bootloader or recovery mode, I get the exclamation triangle with the little android.
Is there any way through a command prompt (or other method) that I can fix this? I tried to re-flash the RA recovery image through the command prompt, but the response was, "waiting for device."
ANYTHING that anyone can suggest to help, I would be so thankful! I've been loving the nexus, and hate to think that I crippled it
Thanks in advance,
Randy
I doubt its bricked.
Noticed you didnt mention that fast boot doesnt work? (power button+trackball) try it.
Once you get to fastboot you can flash any ROM back. (fastboot flash **** commands from a command shell)
Did you ever perform a Nand Backup from Recovery?
It's not bricked, the only way to brick is to interrupt power when flashing a Radio image
Connect phone to PC. Open command prompt.
adb reboot recovery
Wipe, reflash.
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
nexus5894 said:
So far, nobody has managed to brick a Nexus. There is no way as the fastboot mode can restore the whole phone and can't be messed with. Make sure you have the latest version of the SDK with correct USB drivers and fastboot. Then try and reflash the recovery image.
-------------------------------------
Sent from my Nexus One
Click to expand...
Click to collapse
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Paul22000 said:
Actually...
http://forum.xda-developers.com/showpost.php?p=6320068&postcount=404
Click to expand...
Click to collapse
............................
It worked!!!!!
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Randy Malkoski said:
It worked!!
britoso, thank you soooooo much! The only way that I knew to get into bootloader/recovery was via power button/volume down, but power/trackball brought up the bootloader screen, and I clicked on fastboot. I was able to flash the RA recover image through the command terminal via fastboot, then able to get into recovery. I had cyan and modaco sense on the sd, and was able to flash one of them on.
I never thought I'd be so happy to see "quietly brilliant"!!! I WILL buy you a beer, a case in fact as soon as money clears my paypal account.
I have learned my lesson, research research research. (I did do some, but not enough to feel comfortable with what I was doing - hence my cry for help!)
Other than the phone and OS itself, the thing I like most about the nexus is the fact that one CAN root, and then customize (sold a Telus moto droid because I could not do that very thing).
I digress... thanks again so much!
And Paul, thanks for your sense ROM; I've had HTC phones from the Touch to the the diamond to the Hero, and missed the UI!
Click to expand...
Click to collapse
Glad to hear it. You learn the most by trial and error.
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
revonomics said:
I think i got the same problem. i tried to Unlock Bootloader and Root Google Nexus One which was successful but then i tried to superboot it and when it came to the part where you "double click the ‘install-superboot-windows.bat’ file" i clicked it but it did not go to the nnext screen where the superboot completes it just stayed at the "bootloader screen". i must hve not done something or done something wrong i dont know.
So then i unplugged the phone from the pc and rebooted it. when it reeboted i wasnt getting any network, the phone was slow and the notification bar would not slide down...also i noticed the phone restarting on itself...
/i tried all kinds of "restore to factory settings" but not solved. Can anyone tell me what to do tht will work. I coud not understand what was said in the above thread as i am new to this android n my first time rooting n stuff n i believe that solution would work for me too..if some one could please explain in simple tirms the steps i need to take would be good...
Really appreciate it....
Click to expand...
Click to collapse
Tell me what i need to download again and how to go about it...i really need my phone working again ((((
Okay, so I have rooted my Droid eris several times and have downloaded and installed kaosfroyo, vanilla, and plain Jane. I have reverted back to the "stock" Rom with this program on the computer. I have clockwork mod on this because i have seen this name in the text while it installed. So now I think I'm on the stock but I'm not fully sure. I want to unroot this phone completely and make it back to how it was when you would open up a brand new box. Then i was to go through and install the, in your opinion, the best rom out there. Now for the probem, when I go to install a new Rom, I turn off the phone completely, hold down volume down and end buttons, then when the menu comes up I push up on the volume button and i get the picture of an Eris with a red triangle and an exclamation point. That disables me from doing anything. It does the same thing when I turn the phone off and hold volume up with the end button. To fix it, I just turn off the phone and let it boot up normal. Is there any fix for this? Please keep in mind that i am a super dummy when it comes to this stuff so I don't fully understand the technical terms and would appreciate explanations.
Thank you so much for your time and help.
Time To Shine said:
Okay, so I have rooted my Droid eris several times and have downloaded and installed kaosfroyo, vanilla, and plain Jane. I have reverted back to the "stock" Rom with this program on the computer. I have clockwork mod on this because i have seen this name in the text while it installed. So now I think I'm on the stock but I'm not fully sure. I want to unroot this phone completely and make it back to how it was when you would open up a brand new box. Then i was to go through and install the, in your opinion, the best rom out there. Now for the probem, when I go to install a new Rom, I turn off the phone completely, hold down volume down and end buttons, then when the menu comes up I push up on the volume button and i get the picture of an Eris with a red triangle and an exclamation point. That disables me from doing anything. It does the same thing when I turn the phone off and hold volume up with the end button. To fix it, I just turn off the phone and let it boot up normal. Is there any fix for this? Please keep in mind that i am a super dummy when it comes to this stuff so I don't fully understand the technical terms and would appreciate explanations.
Thank you so much for your time and help.
Click to expand...
Click to collapse
By program on the computer do you mean you ran the ruu from verizon to put the stock software back on the phone? If that's the case I beleive you have probably unrooted the phone and will need to re root. I may be wrong but I think the ruu also flashes the original recovery which is why your not able to boot into it.
Conap said:
By program on the computer do you mean you ran the ruu from verizon to put the stock software back on the phone? If that's the case I beleive you have probably unrooted the phone and will need to re root. I may be wrong but I think the ruu also flashes the original recovery which is why your not able to boot into it.
Click to expand...
Click to collapse
I would assume that's what it was. I know it is rooted now because i went through this process to root it after i ran tht program. I don't remember what one it was specifically however i know it had a progress bar on the top right while it installed and had the screen of holding down volume and end button to turn on the phone.
if you are rooted then under your program list you should have superuser permissions icon .. if you dont then you may still be rooted but not likely .. if you do not see that, you can simply go to the market and download a program for root users only and if it doesnt work on your phone then you know you are not rooted .. happy hunting
duccicucci said:
if you are rooted then under your program list you should have superuser permissions icon .. if you dont then you may still be rooted but not likely .. if you do not see that, you can simply go to the market and download a program for root users only and if it doesnt work on your phone then you know you are not rooted .. happy hunting
Click to expand...
Click to collapse
Even if you re rooted afterwards you may need to reinstall recovery...i reccomend you use amons recovery. You can find directions in one of the how-to root threads around here.
problm solved
I posted this elsewhere but I would like a answer faster.
I like to think I am rather educated in regards to how to root and all that. I just got my replacement Evo today and of course it is updated to 2.3.3. So I can't use unrevoked, but I was hoping to flash over to a older backup I made on 2.2 on my old phone.
Except, when I do the whole hold the volume down + power button and eventually choose recover, all that happens is a image of a phone and a exclamation point appears and it never leaves here.
I know in order for me to be able to use ClockwordMod I need to root the phone, which can't happen on 2.3
So what are my options? How do I flash over my old rom???? Even if it doesnt let me get back to 2.2 its still better than redownloading all my apps.
Rapture Veteran said:
I posted this elsewhere but I would like a answer faster.
I like to think I am rather educated in regards to how to root and all that. I just got my replacement Evo today and of course it is updated to 2.3.3. So I can't use unrevoked, but I was hoping to flash over to a older backup I made on 2.2 on my old phone.
Except, when I do the whole hold the volume down + power button and eventually choose recover, all that happens is a image of a phone and a exclamation point appears and it never leaves here.
I know in order for me to be able to use ClockwordMod I need to root the phone, which can't happen on 2.3
So what are my options? How do I flash over my old rom???? Even if it doesnt let me get back to 2.2 its still better than redownloading all my apps.
Click to expand...
Click to collapse
Well, you have a couple problems here.....if I am not mistaken, your first problem seems to be that your recovery may either be corrupt or not installed. I saw this issue back in my TP2 days. Not with the evo though. If this is a replacement EVO and you cannot properly get to your recovery, then I would suggest contacting sprint on this issue. It should at least go into the stock recovery. As for your rooting issue...you can't do anything untill root is provided for the update.....best of luck to you!
His recovery is not corrupt. That's stock recovery
HipKat said:
His recovery is not corrupt. That's stock recovery
Click to expand...
Click to collapse
thats what i thought. so i have to just update the drivers by installing the provided unrevoked drivers/method? id like it but im new and it wont let me. well...
unrevoked dot com/rootwiki/doku.php/public/windows_hboot_driver_install
Well, as we've seen in the 10 million posts about this, there is no root for 2.3.3 yet.
No root, no recovery. No nothing, but stock and that's that.
Rapture Veteran said:
I posted this elsewhere but I would like a answer faster.
I like to think I am rather educated in regards to how to root and all that. I just got my replacement Evo today and of course it is updated to 2.3.3. So I can't use unrevoked, but I was hoping to flash over to a older backup I made on 2.2 on my old phone.
Except, when I do the whole hold the volume down + power button and eventually choose recover, all that happens is a image of a phone and a exclamation point appears and it never leaves here.
I know in order for me to be able to use ClockwordMod I need to root the phone, which can't happen on 2.3
So what are my options? How do I flash over my old rom???? Even if it doesnt let me get back to 2.2 its still better than redownloading all my apps.
Click to expand...
Click to collapse
Are you s-on or s-off ?
HipKat said:
His recovery is not corrupt. That's stock recovery
Click to expand...
Click to collapse
If I member right once in stock recovery you push vol up + power button to get the menu up.
sent from my locked EVO via tapatalk
*Now Working for 4.3 Update* Will require an up-to-date install of 4.1.x first and then after re-boot, it will update to 4.3 (read post on next page).
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here https://www.dropbox.com/s/9wbux6a4kn0ndz9/StockRecovery-signed.zip
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
jay_ntwr said:
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here http://www.androidrevolution.nl/downloader/download.php?file=Flash_recovery_2.17.401.1.rar
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
Click to expand...
Click to collapse
I appreciate you writing this up. It seems like I've never been able to find a good solution to installing the OTA updates post-root. That being said, do you have any idea what happened in Step 7 that made it finally work? I just don't understand how doing the same thing over and over finally just worked. I want to try installing an update, but I'm a little nervous to do it. And I don't know how else to make the pesky update notification go away without installing it.
trickinit said:
I appreciate you writing this up. It seems like I've never been able to find a good solution to installing the OTA updates post-root. That being said, do you have any idea what happened in Step 7 that made it finally work? I just don't understand how doing the same thing over and over finally just worked. I want to try installing an update, but I'm a little nervous to do it. And I don't know how else to make the pesky update notification go away without installing it.
Click to expand...
Click to collapse
I really have no idea why Step 7 got so strange. The only thing that gave me a warm fuzzy whatsoever was that others were reporting that it was hanging and they just rebooted the phone over and over until it got all the way through the process. It could have something to do with the stock recovery for all I know--a bug perhaps. Again, it made me nervous and I won't do it again. I only did the write up so folks could see what happens and make a call whether or not they wanted to try it themselves and see the steps all on one page instead of getting stuck like I did and then finding the rest of the steps. That part sucked. At least you'll know what you're getting into though. Good luck one way or the other. Please post up if you do go through with it and what your results are.
Thank you for the info! Does sound like an awful lot of work though
jay_ntwr said:
I really have no idea why Step 7 got so strange. The only thing that gave me a warm fuzzy whatsoever was that others were reporting that it was hanging and they just rebooted the phone over and over until it got all the way through the process. It could have something to do with the stock recovery for all I know--a bug perhaps. Again, it made me nervous and I won't do it again. I only did the write up so folks could see what happens and make a call whether or not they wanted to try it themselves and see the steps all on one page instead of getting stuck like I did and then finding the rest of the steps. That part sucked. At least you'll know what you're getting into though. Good luck one way or the other. Please post up if you do go through with it and what your results are.
Click to expand...
Click to collapse
I'm thinking I'll give it a go. I'll do a nandroid backup and store it on my pc. Worst case scenario, I'll just start over from scratch, re-root, and restore my backup. I'll make sure to report my results.
I just makes me wonder why bother using the OTA update if you already went through rooting and flashing custom recovery? It's just one step more to flash the custom ROM and at least you will get constant updates with the developer who created the custom ROM. To me it seems like you either stay stock if you want OTA updates or go the whole hog and use custom ROMs. Just my 2 cents.
shadowboy23 said:
I just makes me wonder why bother using the OTA update if you already went through rooting and flashing custom recovery?
Click to expand...
Click to collapse
Well, in my case, I purchased the Dev edition straight from HTC so I automatically have a de-bloated OS from HTC instead of the ATT ROM that I would have gotten had I purchased the phone from the ATT Store. In that case, I'd no question have a custom ROM from the forum. I just didn't see the need this time around. I would have left the stock recovery, but I do like to make backups so ClockworkMod is something I can't live without. I suppose there are others in that same boat but they are probably few and far between. Really, I just hate to update my ROM since the phone is working how I want at the moment. It's hard to justify just blowing away a functioning OS, setting up everything again, etc. but I may do it again if the OTAs come frequently and/or the process is as strange as it was this past go around.
jay_ntwr said:
Warning:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Background:
I'm certainly not a developer but can wiggle my way around XDA and figure out what to do and how to do it from time to time without having to ask too many questions. This morning I got the notification that an OTA (over the air) Update was available for my HTC One Dev Edition (running the stock ROM) and I simply downloaded it and tried to flash the zip in Clockwork like I've done with countless other updated nightlies on various phones. It didn't work.
Solution:
I figured out after researching that the custom recovery wouldn't allow the OTA to be flashed and that the stock recovery would be needed to flash the OTA update. I also realized that it took a bunch of different threads to figure out how to make it all work and there didn't seem to be one thread on the HTC One forum that discussed how to do it so I figured I may as well write up what I did to help someone else--after all, so many folks have helped me on this forum and I've rarely had much to contribute of any real depth anyway--just repeating what others already had taught me.
How to:
You need to re-flash the original recovery to your phone so that CWM or TWRP are no longer your recovery. Obviously, now is the time to do a backup and I'd put it somewhere other than on the phone in case you really mess this up.
1. Get the stock recovery bits here http://www.androidrevolution.nl/downloader/download.php?file=Flash_recovery_2.17.401.1.rar
2. You'll need to un-pack the rar and there is a text file that has the instructions.
3. Of course, I didn't follow the instructions, I just plugged my phone into USB with debugging on and fired up cmd, changed into the directory where I extracted the files, cd'd into fastboot and typed "adb reboot bootloader" and waited until the phone rebooted into bootloader
4. I typed "fastboot devices" and hit enter to make sure I was connected to the phone still
5. Cd.. to get back to where the .bat files are and type install-recovery-windows.bat and the stock recovery is flashed to your HTC One.
6. Now unplug the thing and reboot and you'll get the notification again that the OTA update is ready to install and it will start to install.
7. Mine locked up. That's right, the damn OTA update stopped at about 1/4 of the way through. I figured I bricked the phone. I always figure I bricked it if something doesn't go exactly how I thought it would but I've never actually done it to any of my 6 or so devices. Then I found this thread: http://forum.xda-developers.com/showthread.php?t=2306996&page=2 and I turned off the phone by holding down the power and restarting it. It got all the way through and hung again so I reset the phone again. Then, it rebooted a few times and looked like it was going to never work right again, but I just let it keep rebooting and left it be and after a few minutes, less than 10, probably more than 5, I was back up and running and saw the android applications updating as expected after an update.
8. Now you'll want to re-flash your custom rom (TWRP, CWM) and I did that with Hasoon's All-in-one tool.
9. Re-get Root. You can do that with Hasoon's tool I suppose or however you prefer to root.
AGAIN:
Because of of how weird step 7 was, I'd recommend NOT INSTALLING THE OTA and just waiting for a ROM to have the changes incorporated. This is the last time I'll install an OTA I think as the whole thing was sketchy at best. However, if you just insist doing the OTA, that's how I did it. It may not work for you. You'll probably brick your phone as I may have just gotten lucky.
Hopefully someone will come up with a better way to do this and start a new thread and we can delete this one forever.
Click to expand...
Click to collapse
hi,
one question. this recovery.img i also can use for my htc one 802w? i use the original rom (4.1.2) on my htc one. i make s-off over htcdev.com install cwm802w.img . i become the info the system update to 4.2.2 is available but the phone cant install the update.
any people like help me?
best regards,
ps: sorry for my bad english
Does sound like an awful lot of work though
greengoose_at said:
hi,
one question. this recovery.img i also can use for my htc one 802w? i use the original rom (4.1.2) on my htc one. i make s-off over htcdev.com install cwm802w.img . i become the info the system update to 4.2.2 is available but the phone cant install the update.
any people like help me?
best regards,
ps: sorry for my bad english
Click to expand...
Click to collapse
Just find a stock recovery for 802w, flash it to your phone and you should be fine to to OTA. The original post didn't mention if he's using 802w. If he's not, then the recovery.img can't be used for 802w.
How to get s_off , supercid 11111111
and return to s_on with supercid ?please tell me quickly
Thanks for all friends
Sent from my HTC One using xda premium
Sent from my HTC One using xda premium
I haven't been able to get this to work. I flashed back to the stock recovery, but when I attempt to install the update it gets about half way through before rebooting. It goes back into recovery, starts installing again, but then stops and just shows a red triangle with an exclamation mark. I can get the phone to reboot by holding the power button for 10 seconds, which boots it up normally. When it gets up and running, it's like nothing ever happened, but then the update notification reappears.
trickinit said:
I haven't been able to get this to work. I flashed back to the stock recovery, but when I attempt to install the update it gets about half way through before rebooting. It goes back into recovery, starts installing again, but then stops and just shows a red triangle with an exclamation mark. I can get the phone to reboot by holding the power button for 10 seconds, which boots it up normally. When it gets up and running, it's like nothing ever happened, but then the update notification reappears.
Click to expand...
Click to collapse
I'm experiencing the same thing, can't seem to find anything about it...
With the new 4.3 rolling out on the Dev editions, I decided it was time to try this again. What I found was I had to update to a something prior to the new 4.3. In other words, it was still one of the 1.29 streams that updated first and did just like the last time I did this. The thing stopped, locked up, had to hold the power button down, locked up again, reset again, then it was fine. As soon as the phone booted, the 4.3 update was available and I installed that without any issues. So, the method above still works and even with the weirdness I felt a little better this go around.
Good luck.
sunnyyen said:
Just find a stock recovery for 802w, flash it to your phone and you should be fine to to OTA. The original post didn't mention if he's using 802w. If he's not, then the recovery.img can't be used for 802w.
Click to expand...
Click to collapse
I haven't really checked this thread in weeks. I'm not sure what an 802w is. If you can clarify, I'll check and post.
Totally ran just fine
I had to as stated roll back to the attached recovery, did that with fastboot and no problems, then restarted the phone, then had it start the OTA update, then read around debating if I want CWM or TeamWin, but before I notice, the progress bar got up past half way. Looked away for what must've been less than 5 minutes until it vibrated and was restarting itself. It restarted again, and then it loaded and updated all the apps... Seemed like the smoothest rooted update I've ever done, no forced restarting or anything!
I just bought my HTC One last friday, and I think I screwed up things a little bit, because the first thing I did after I charged it, was updating everything to 4.3, before unlocking the bootloader, getting s-off and before rooting the phone. So I ended up with the latest 4.3 on my phone, but it was a pain in the ass to root it properly. I was able to unlock the bootloader, but something must be different with the way 4.3 treats the internal storage distribution, because I was only able to get root, using TWRP and the latest version of SuperSu, but I wasn´t able to install Busybox.
It's a little bit weird, because although I was able to use Titaniumbackup to install some apps, apps like OTA Rootkeeper don't work properly. I also lost the stock calculator, flashlight and voice recorder, but I was able to install older versions again.
I think the only thing I regret is not getting s-off first, but I think this will only mean that I will have to wait for a revone update, or I will have to flash the boot.img after flashing a custom rom as I always did with my One X.
jay_ntwr said:
I haven't really checked this thread in weeks. I'm not sure what an 802w is. If you can clarify, I'll check and post.
Click to expand...
Click to collapse
802w is Chinese dual sim version with different radio frequency
Sent from my HTC One dual sim using xda app-developers app
deepforest said:
802w is Chinese dual sim version with different radio frequency
Sent from my HTC One dual sim using xda app-developers app
Click to expand...
Click to collapse
That is not the one I have then.
I have a rooted HTC one with stock rom. I relock the bootloader and I also have stock recovery.
I am on 4.19.401.5 version.
So, will it be possible for me to have new OTA update including Sense 6?
Should I install the missing applications also, like calculator and flashlight?