Phone: Samsung Vibrant
PC: Windows 7 64-bit
Latest drivers from xda installed for phone.
I've tried for over 2 hours now and rooting does not work for me.
It will not push the update.zip to my phone and my phone does not restart.
I have followed the instructions in the Rooting forum to a T.
I've turned on USB Debugging. I plug my USB cable in. My drives show up in Windows Explorer. I then run the T-Mobile Vibrant One-Click Root application in admin mode.
I click on One-Click Root and the shell runs. It says my phone should be rebooting but nothing happens on my phone. Nothing gets copied and the phone does not reboot.
Any ideas?
EDIT: I looked in the rooting thread more and people have been posting about ADB. I've checked this in my Device Manager and I have "ADB Interface" listed there with no ! on it. It says it's working properly.
Are you mounting the USB??? To get adb or other apps to work you can not have the USB connecte mounted. You said you can see it in windows explorer so I am assuming that you mounted the USB.
The mounting is happening automatically. I plug in my USB and it mounts and turned on USB Debugging. Not sure why it's doing it automatically as it never has in the past.
I'm not sure what you mean by "you can not have the USB connected"
If I can't have the USB connected then how do I do this?
Skullpuck said:
The mounting is happening automatically. I plug in my USB and it mounts and turned on USB Debugging. Not sure why it's doing it automatically as it never has in the past.
I'm not sure what you mean by "you can not have the USB connected"
If I can't have the USB connected then how do I do this?
Click to expand...
Click to collapse
You cannot have the drives mounted , if they show up in windows , adb will not work ..
Did you happen to install the winamp beta for android? , it mounts the drives.
watcher64 said:
You cannot have the drives mounted , if they show up in windows , adb will not work ..
Did you happen to install the winamp beta for android? , it mounts the drives.
Click to expand...
Click to collapse
Yes... I did.
So I uninstalled Winamp Beta. Removed the USB. Plugged it back in. This time the drives did not mount.
I tried to run the One-Click again and nothing happened.
Can anyone help? I'd really like to be able to root my phone.
Why don't you just download the. Zip file, rename to update.zip, move it to the root of your internal sdcard, reboot into recovery, then reinstall packages.
I'm not sure why you're using a PC to root.
Sent from my SGH-T959 using XDA App
If you search for 'root your Vibrant ' you will get step by step instructions on how to root without using a PC. That method has worked for me numerous times.
Sent from my SGH-T959 using XDA App
Search For "OCLF" In The Market
Install App
Open App
Click Root Phone
Reboot Phone Into Recovery
Select Reinstall Packages
Reboot
Your Now Rooted. Now Dance
Dude,
This is what I follwed and it worked 100% for me:
1. Download update.zip file on PC
2. On your Vibrant, go to Settings > Applications > USB Settings > and select Mass Storage.
3. Connect your Vibrant to your computer, and mount as a mass storage device by pulling down the notification bar at the top of the screen.
4. Back on your computer, look for a new drive. We’re looking for the Internal Storage, not the External, so make sure you open the drive that does NOT have the Avatar movie in it.
5. Copy (drag and drop) the update.zip file to the Internal Storage.
6. Turn off the phone.
7. Hold down the volume up and down buttons while turning the Vibrant on, which will bring you to the recovery mode.
8. To navigate in Recovery, use volume up and down to move, and Power button to select. Select ‘Reinstall Packages“
9. After installed, your phone will reboot, and will have the Superuser app, as well as Busybox installed.
10. You’re Rooted!
Nikhil
Worked great until Step #7.
I tried turning the phone on holding down both the volume up and volume down buttons but no recovery console.
Disregard my previous. I got into the recovery console and I followed the instructions.
Things seem to be working. I have the Superuser app but not the Busybox one.
i need help with this as well. i just downgraded my brother's vibrant to 2.1 update1 so that i can root cuz i couldnt get it to work with 2.2. and now when i do the update.zip file it doesnt seem to work. i get a superuser app but i dont have root. idk what is going on. i have tried everything from one click root to manual rooting. whenever i go to the main recovery and hit reinstall packages the yellow bar doesnt go all the way before it says it's finished and reboots. could this be an issue? please help..
Related
Has been working fine with no issues. I have windows 7 ultimate x64. I never get the option to mount when I plug it in. so I tried a different pc and still no luck. I'm not rooted. Restarted my phone, remounted my memory still no luck. Please help.
Sent from my SGH-T959 using XDA App
Turn on USB Debugging.
Settings -> Applications -> Development -> USB Debugging
Worked for me
First, make sure you are using the pull down menu on your phone to select mount sd card. If that isn't the problem then you probably need to download and install the drivers from samsung on your computer. There is a link I'm sure you can find in the xda forums with a step by step directions for this exact problem.
Sent from: Sammy Vibe Rooted
ROM: Stock
Recovery: Clockwork 2.5.0.4
BrittFTL said:
Turn on USB Debugging.
Settings -> Applications -> Development -> USB Debugging
Worked for me
Click to expand...
Click to collapse
Just tried and didn't work, thanks
All I did was install nova and this happened ( sad face)
Halieus said:
First, make sure you are using the pull down menu on your phone to select mount sd card. If that isn't the problem then you probably need to download and install the drivers from samsung on your computer. There is a link I'm sure you can find in the xda forums with a step by step directions for this exact problem.
Sent from: Sammy Vibe Rooted
ROM: Stock
Recovery: Clockwork 2.5.0.4
Click to expand...
Click to collapse
I didn't have drivers before and it worked. So I did install from samsung.com and-still no success. Says it cant recognize device. Also It charges but never shows the.USB symbol or asks me to mount.
Any ideas... Any one
Sent from my SGH-T959 using XDA App
For those of you having a problem with Windows 7 recognizing your Vibrant ... here is how I fixed it on my system.
*Note: You do not need to load any special USB drivers for your phone to be recognized in Mass Storage mode in Windows 7.
*Warning: You follow these instructions at your own risk ... no screaming at me if you try it and something gets screwed up!
1) Navigate your way into the Device Manager / Universal Serial Bus Controller
2) Uninstall the device(s) "USB Root Hub" (My system had 2 listed)
3) You will lose mouse and keyboard control (because you just removed the USB Hubs)
4) Reset your PC and allow Windows to boot normally.
5) Go back to the device manager and wait for all of the "!" marks to go away as windows re-installs the USB Hubs and reinitializes all of your devices.
6) Make sure your Vibrant is in mass storage mode and has USB debugging OFF
7) Plug in your Vibrant via the USB cable and be amazed as windows recognizes your device and assigns the drive letters. After you select the mount option on your phone you will have normal access via windows explorer.
Hope this helps some of you out there !!!
~Stresa
Thanks. I am having this problem right now. I used to work. now all of the sudden it just stopped connecting. But i have a clarification questions. when you say remove the usb root hub, do you mean uninstall or disable?
Thanks.
I had the same problem after flashing JI6 via ODIN (after softbricking a la t-mobile ota), but I was able to fix it by enabling the prompt to ask what to do every time usb was connected, and then changing it back to treating it as mass storage. I read this suggestion in another forum (don't remember where) and it helped with mine.
I had no trouble before the update, it just started right after.
dandab said:
Thanks. I am having this problem right now. I used to work. now all of the sudden it just stopped connecting. But i have a clarification questions. when you say remove the usb root hub, do you mean uninstall or disable?
Thanks.
Click to expand...
Click to collapse
Sorry, I should have been more clear. It should say uninstall. You want to force windows to reinstall the devices.
I know this thread is old but if you change your view in device manager to view by connection you can find which root hub to uninstall and then re-install. This happened randomly when I was trying to update my epic and I didn't have to re-start because it was only the front ports root hub that was having the problem. Thanks for the help.
Does anyone use the micro usb port? I have yet to find a use for it. I can't transfer files with it, charge with it nor are there any peripherals (that I know of) that can use it. I searched around but couldn't find much useful stuff on the port. All I found was this useless video:
**Ok I can't post the video because of more stupid forum rules but just go to youtube.com and append this after the url: /watch?v=1xBVu-IatDQ **
Anyway, if someone has ideas on how this port can be used I'm all ears... Thanks.
dq
It is a file transfer port. you plug a cable into it and into your PCs usb port. works like the ones on your phone.
Does it work for you? Because it doesn't for me. Nothing happens when I plug it into a computer. No automounting on the computer side or indication on the tablet that I can put it into "usb storage mode" like the 2.X Android versions do.
dq
don quixada said:
Does it work for you? Because it doesn't for me. Nothing happens when I plug it into a computer. No automounting on the computer side or indication on the tablet that I can put it into "usb storage mode" like the 2.X Android versions do.
dq
Click to expand...
Click to collapse
What OS are you using on your computer, and have you installed the drivers for it?
don quixada said:
Does it work for you? Because it doesn't for me. Nothing happens when I plug it into a computer. No automounting on the computer side or indication on the tablet that I can put it into "usb storage mode" like the 2.X Android versions do.
dq
Click to expand...
Click to collapse
Computer OS? i just plugged it into my Win7 system and it was there instantly. 3.0 shows up as a media device, which allows both the tablet and the computer to talk to the sdcard at the same time. So you won't see a mount prompt on the tablet. BTW my Incredible2 is running 2.3 and also lets me access the SD card on it and the computer at the same time.
I'm still using an old tiny xp and it worked fine for me just plugged it in and there it was
I tried Gentoo Linux and XP and neither worked. What drivers do I need to install?
I also have access to a Win7 system so I'll try that.
dq
Drivers from acer website.
I have adb installed should this not be enough?
You need none installed. ADB if its running in some form might be interfering. its just a basic driver in windows it uses.
I only run adb-server when I need it and not all the time. I thought that any needed drivers would have been installed when I installed adb.
For my Gentoo machine what should I do? It's not detected at all if I plug it in. My x10 mini and Nexus One are detected no problem and I can mount them and everything so what's up? Is there a kernel module that I need to build?
Thanks.
dq
I had to download these drivers for my xp netbook ,,
http://global-download.acer.com/GDF...A Tab&Step3=A500&OS=a05&LC=en&BC=Acer&SC=PA_6
I agree with Nova 5. The Windows drivers for USB come with the SDK and while you might not think you will have use for the SDK you will. It makes the process of installing custom ROM,s and Recovery Kernels a breeze. You download your zip flashes or recovery images to Win 7 and then you adb push your downloads to the tablet. The alternatives, unless soneone was nice enough to compile you an apk, which most advanced system developers don,t bother with, unless their app is destined for the massees throug Andriod market, is to install a terminal emulator and enter native Unix/Linux shell commands manually. If you aren't a shell cmd expert I suggest you immediatly download the latest Android SDK for Windows and start learning what it can do for you with just 2 or 3 adb push commands which can help you advoid 10's of lines of manually entered Linux shell commands that can do some real damage to your system if you are copying someone elses terminal emulator sh install instructions, don't understand what they do and make 1 simple typing mistake. With adb push you don't even have to get involved in Linux's complicated bit based permission changes to install something at the system level.
Sent from my A500 using xda premium
Yes, well I only really use adb in the same capacity as what you describe-- to root a device. After that busybox can be installed and I can either ssh into the device (which I prefer) or use the terminal on the device itself.
But my problem is the detection of the device once it is plugged into my Linux box. I'm not sure if I need a special driver for that and I'd rather not aimlessly search through the kernel config in order to build one (I've done that before and it's painful!). It's good to know that one can mount it on an external device and still use it simultaneously though. That will save me time in trying to fiddle around with settings in the tablet itself...
dq
don quixada said:
I have adb installed should this not be enough?
Click to expand...
Click to collapse
If you are not able to transfer files Try enabling usb debugging before connecting to pc.
If the tab is not in the usb devices list and it doesn't show up as an unknown device, you might want to try another usb cable. Or another port if you have the Windows and Linux on the same machine and you are trying to connect on the same port.
Sent from my A500 using XDA Premium App
gradyzero said:
I agree with Nova 5. The Windows drivers for USB come with the SDK and while you might not think you will have use for the SDK you will. It makes the process of installing custom ROM,s and Recovery Kernels a breeze. You download your zip flashes or recovery images to Win 7 and then you adb push your downloads to the tablet. The alternatives, unless soneone was nice enough to compile you an apk, which most advanced system developers don,t bother with, unless their app is destined for the massees throug Andriod market, is to install a terminal emulator and enter native Unix/Linux shell commands manually. If you aren't a shell cmd expert I suggest you immediatly download the latest Android SDK for Windows and start learning what it can do for you with just 2 or 3 adb push commands which can help you advoid 10's of lines of manually entered Linux shell commands that can do some real damage to your system if you are copying someone elses terminal emulator sh install instructions, don't understand what they do and make 1 simple typing mistake. With adb push you don't even have to get involved in Linux's complicated bit based permission changes to install something at the system level.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Not nearly what I was saying. Not even close enough that a bomb would touch it.
Simple answer is my vista and win7 systems accessed the iconia as a media player device requiring no drivers as they are a common system driver. My only comment about ADB was that it might be interfering if it somehow was left running in the background.
I'm not sure what the problem is, but I had to play around with the settings and plug it in several times and finally it showed up. Now I plug it in and the dialog for auto play shows up instantly. When I choose to view files, I get a window with two drives. One is the internal storage and the other is the sd card.
sandiegoan said:
I'm not sure what the problem is, but I had to play around with the settings and plug it in several times and finally it showed up. Now I plug it in and the dialog for auto play shows up instantly. When I choose to view files, I get a window with two drives. One is the internal storage and the other is the sd card.
Click to expand...
Click to collapse
Sometimes mine gets a bit wonky as well. Every now and then, I'll plug it in, get the windows dialogue box asking me what I want to do. I open it up and the box is blank, no drives, nothing. Unplug it, wait a few seconds, pop it back in, and everything is OK. No rhyme or reason, and it doesn't happen all the time.
Quick trick for win7 .
Plug in the device.go into device manager delete its entry and the USB controller it resides on.unplug device.install driver from acer web site.then try the device again.
This works on several USB type issues
Good luck if you don't understand don't try
When I connect my Nexus 7 to my Windows XP (SP3) PC via USB, it's obvious the computer recognizes it and it tries to install ADB drivers. Whether I choose to install those drivers or not, I still can't locate my device in the Windows Explorer Tree. I checked Disk Management for the hell of it and nothing but my PC's harddrives were there. There's an attempt to install drivers for "MTP" but that fails and I'm pretty sure that's the cause; however, I'm unable to replicate it, even as I uninstall/reinstall applicable drivers from the device manager the MTP failure never happens anymore. I did some googling and found a thread with someone who had a similiar experience. In turn, I downloaded https://www.box.com/s/2c25e8bc42ecce400afd to try a different set of drivers. Same problem. Driver install is fine for ADB, but still unable to see my device in Windows Explorer. I'm able to successfully connect the device to the PC with PTP for the camera. I can access DCIM and cache which can serve as a work around, but I'm hoping you can provide any ideas you might have. Thank you!
edit - ***resolution***: Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
While connected to PC, I switched to PTP mode because I was about to give up and just use that
I then disabled usb debugging and switched back to MTP at which point the drivers successfully installed and I could now view my device in Windows Explorer. I also believe downloading the drivers in the link above helped since the first crack I took at this was unsuccessful with existing drivers.
install pdanet on pc and it will install drivers for u so it will be recognized
Ok, I figured it out...I had to disable USB debugging. I don't know if this helped either, but I installed these drivers as an alternative to the drivers that were originally installed: https://www.box.com/s/2c25e8bc42ecce400afd
Been battling with this on my XP machine since yesterday. I couldn't even get debugging to work until I installed NakedDriver. And even still, there seems to be no way to get MTP to work without turning debugging off. On my Win7 machine everything worked perfectly, both ADB and MTP, right out of the box. I have the Galaxy Nexus drivers installed on both machines (which I've read are compatible with the N7). I also have the latest version of Windows Media Player (I've read that some older versions have issues with MTP). Is anyone else able to run ADB and MTP on XP?
*edit*
A: Does PDAnet let you use MTP and ADB simultaneously? Because I really don't want to install it if I don't have to. I got rid of it ages ago (too many things starting up at boot time).
B: I have a Galaxy Nexus also, and I have no issues on the XP box.
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
asus site now has a usb driver for N7
try that
Nordendorf said:
asus site now has a usb driver for N7
try that
Click to expand...
Click to collapse
Updated with ASUS drivers, still doesn't view internal storage fully.
Salty Wagyu said:
Updated with ASUS drivers, still doesn't view internal storage fully.
Click to expand...
Click to collapse
Same here. No change with the Asus drivers. Still can't use MTP when ADB is turned on.
poo. how do I transfer my audiobooks to this stupid device without working drivers?
1. Please disconnect Nexus7
2. Remove drivers on PC.
3. Toggle ON : Settings->Wireless&Networkings->More->NFC.
4. Re-connect device
Good luck !
GotLoveForAll said:
poo. how do I transfer my audiobooks to this stupid device without working drivers?
Click to expand...
Click to collapse
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
im having trouble too, is there any way to make the device to be recognised as a flash drive?
Internal memory partly invisible from Windows 7 Explorer
Salty Wagyu said:
I wouldn't bother with MTP, it's not always showing the contents of the internal storage properly when viewed in Windows Explorer.
Earlier today when I was trying to set up a backup profile for it, it didn't copy all the files off. On closer inspection I found folders like TitaniumBackup to be completely empty, which is not true according to ES File Explorer on the tablet.
I tried connecting MTP again, with USB Debugging on and off but this made no difference. Also I'm only seeing the Notifications folder instead of 36 folders on the internal storage now, really random how it's working.
Click to expand...
Click to collapse
Same observation here (a few months later) on stock Android 4.1.1 rooted.
It seems that new files in the internal memory remain invisible for a long time, but so far they have become visible eventually, sometimes a day or two later. I have no clue what could possibly cause this, and I have not found any trick or workaround that makes them visible, not even rebooting. Any hint is welcome.
SE4GT said:
1. Uncheck MTP, check the one next to it (Camera)
2. Unplug USB
3. Turn off USB Debugging (Uncheck it)
4. Plug in USB
5. Should say connected as camera, then a new window will pop-up allowing you to see your files.
Tell me if it works!
Click to expand...
Click to collapse
Didn't work. Just shows up as a camera with the limited folder access one would expect.
Workaround
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Same issue with an old ibm x40 udated to windows xp pro SP3.
I've installed mtp driver, without success
I've "tried" to install asus driver, without success
I've tried to do as above with the help of the nexus toolkit, without success.
Everytime, the laptop recognize the device as android ADB interface.
Someone could help me?
Thank you in advance
mistershark said:
Everytime, the laptop recognize the device as android ADB interface.
Click to expand...
Click to collapse
Disable USB debugging in your phone.
Same problem with my moto xoom...files not showing in MTP using windows xp...still have not found any solution
hgmichna said:
Disable USB debugging in your phone.
Click to expand...
Click to collapse
+1 have to toggle USB debugging in winXP
hgmichna said:
I now use the following workaround.
Install SDrescan from Google Play.
Run it.
If you already had your phone connected to a computer as a media device (MTP) and are watching the contents of your SD card or internal memory in Windows Explorer, press F5 to refresh your view. If not, connect it now.
I'd be curious whether this works for you as well. If it does, press the THANKS button below.
Click to expand...
Click to collapse
It works! THANKS A LOT!!!
Anyone else with problems seeing the storage after plugging into PC? adb command works and device drivers installed. Found another forum where turning the usb from MTP to charging and back under developer options does the trick. I have a non stock ROM and seeing if fresh out of the box experiences the same thing.
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
rramey23 said:
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
Click to expand...
Click to collapse
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Kandydish said:
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Click to expand...
Click to collapse
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
rramey23 said:
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
Click to expand...
Click to collapse
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Kandydish said:
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Click to expand...
Click to collapse
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
zosimov21 said:
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
Click to expand...
Click to collapse
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Kandydish said:
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Click to expand...
Click to collapse
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
zosimov21 said:
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
Click to expand...
Click to collapse
I have downloaded them. How do I specifically choose just that file? When I go through updating the driver, it asks for a folder location.
Go to dev options, switch the USB from ptp back to mtp and it works for me
xxsashixx said:
Go to dev options, switch the USB from ptp back to mtp and it works for me
Click to expand...
Click to collapse
Tried. Keeps trying to install the MTP drivers and it won't go through.
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Kandydish said:
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Click to expand...
Click to collapse
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
bartendersimon said:
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
Click to expand...
Click to collapse
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Kandydish said:
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Click to expand...
Click to collapse
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
bartendersimon said:
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
Click to expand...
Click to collapse
Changing it from charging to MTP shows a MTP device in Manager with a yellow exclamation mark next to it. When looking into the details, it says that no drivers are installed. When I try "Updating Drivers", it says "Windows failed to install drivers. Code 28" or something along those lines. Code 28 MEANS that Windows failed to install drivers.
Thanks for nothing Microsoft.
Nexus 6p Connection to PC Issue - This Helped!
I had similar problems with PC not recognising my Device. I found http://www.technobuzz.net/install-google-nexus-6p-usb-drivers/ which helped me solve my issues.
1. Downloaded and installed the Huawei Nexus 6p drivers. This installed a Huawei Task Manager which connection to pair was still not recognisable.
2. Deleted old drivers (acer, samsung, htc) from' Device Manager'. This actually helped PC recognise my device which showed up in the Device Manager>Other Devices>Nexus 6p, also in PC interface but once moved off charging to MTP, computer didnt recognise device.
3. Downloaded and installed the adb/fastboot installer. Followed instructions till step 10. My screen didn't show anything like Andoid ADB interface, it displayed MTP file install, which I installed. Just remember to refresh in My PC interface when changing over from charging to MTP, sometimes Nexus 6p will be hidden.
4. Uninstalled the Huawie Task Manager.
This has solved my problem with PC and Device connection. The instructions given are from what I can recall of the process I went through.
Credit to Sidharth Rathore from Technobuzz for this solution.
Hope this helps.
Later.
p.s. I have a windows 10 laptop if this helps.
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I was having the same issue until I uninstalled some other debugging drivers I had installed. So I would recommend crawling through your installed apps for any other android usb drivers and uninstalling them if you still have this issue.
Working on mine right now. Found that USB 3.0 ports will not recognize device. Once plugged into a 2.0, it is recognized. Might help your issue