Related
is it possible to switch to another custom recovery after I already got clockworks?
I tried unrevoked but its stuck in the reboot (I believe its trying to root my aria again)
not sure what youre trying to do.... i believe Clockwork is the only Recovery for rooted phones. if you want to flash a custom ROM, well that is something else altogether. please be specific as to what you want to flash to the phone. include a link to the flash too
I was trying to flash psfreedom recovery rom from here
http://psfreedom.com/wiki/HTC_Aria
I believe the method on that website was for unrooted arias without clockworks
zyo said:
is it possible to switch to another custom recovery after I already got clockworks?
I tried unrevoked but its stuck in the reboot (I believe its trying to root my aria again)
Click to expand...
Click to collapse
To flash a different custom recovery on your Aria, you need to rename the zip file LIBEIMG.ZIP on the SD card and boot in HBOOT (Power on the phone by holding down VOL DOWN and the Power Button). When it boots to the HBOOT screen you should see text stating that it found LIBEIMG.ZIP and is installing it.
awesome. now before I go ahead, is there any clockworkx recovery image I can revert back to?
zyo said:
awesome. now before I go ahead, is there any clockworkx recovery image I can revert back to?
Click to expand...
Click to collapse
I'm curious, what recovery are you talking about?
thanks for including the link. the instructions are clear.... Root IS required, Clockwork recovery is recommended, the Freedom Aria flash appears to be a custom ROM.
once the phone is Rooted, boot into Recovery, make a Nandroid backup, and flash downloaded zip file from SD card.
if you need help Rooting, there is all sorts of good methods available on this site. I use the Unrevoked method myself, but it works best on Linux or Mac OS
zedbra said:
thanks for including the link. the instructions are clear.... Root IS required, Clockwork recovery is recommended, the Freedom Aria flash appears to be a custom ROM.
once the phone is Rooted, boot into Recovery, make a Nandroid backup, and flash downloaded zip file from SD card.
if you need help Rooting, there is all sorts of good methods available on this site. I use the Unrevoked method myself, but it works best on Linux or Mac OS
Click to expand...
Click to collapse
hmm I think you are looking at the old method which is a custom rom
The new one is a custom recovery which brings me to the question as I dont think you can flash a custom recovery in the clockwork custom recovery.
its possible im looking at the wrong thing, but far as i can tell it states "Recovery Custom ROM" which is totally different from Custom Recovery ROM
From link posted above:
"Update can be installed in recovery mode in Psfreedom settings menu via Update (local) or Update (net) if you have configured your wifi connection. Put the file on your SDCARD and install it.
Download Recovery custom rom : http://alephzain.klutsh.com/aria-recovery.tgz "
tpbklake said:
To flash a different custom recovery on your Aria, you need to rename the zip file LIBEIMG.ZIP on the SD card and boot in HBOOT (Power on the phone by holding down VOL DOWN and the Power Button). When it boots to the HBOOT screen you should see text stating that it found LIBEIMG.ZIP and is installing it.
Click to expand...
Click to collapse
I have similar questions. I was trying to update my version of clockwork also using unrevoked again, but couldn't get it to work. I guess my questions are:
1. Is there any benefit in updating to a newer version of clockwork? My current version is 2.0.x.x and I believe the latest one is 2.5.0.4.
2. Will this same method work to do so? Can I rename the latest clockwork .zip file like this and get it updated?
I thought using the flash clockwork option in ROM Manager would do it, but it doesn't. If I reboot from ROM Manager it goes to the newer version, but if I reboot otherwise it goes to my original. The couple times I've used it, there appears to be maybe some different features/options in the newer one and I feel like I might be missing out on something!
What's the difference with this recovery?
Sent from my Liberty using XDA App
zedbra said:
its possible im looking at the wrong thing, but far as i can tell it states "Recovery Custom ROM" which is totally different from Custom Recovery ROM
From link posted above:
"Update can be installed in recovery mode in Psfreedom settings menu via Update (local) or Update (net) if you have configured your wifi connection. Put the file on your SDCARD and install it.
Download Recovery custom rom : http://alephzain.klutsh.com/aria-recovery.tgz "
Click to expand...
Click to collapse
These are probably two different things. once you got the recovery rom flashed you can upgrade it in recovery mode (hence its different from original clockwork recovery)
Ok bro, I didn't see much info about it so I'm gonna take your word for it.
@brswattt, far as I can tell this is " basically" used for jailbreaking the ps3.
@armyengineer;
you can use unrEVOked to flash the new recovery. if youre a Windows user, download the unrEVOked tool and run the .exe as Administrator. also make sure there are no conflicting s/w on the PC such as HTC Sync and you have all the drivers installed(HBoot, ADB drivers, etc.)
for more info about the PSFreedom Recovery, check out THIS Thread HERE
unrevoked keeps giving me
couldnt find misc
error, is there any other way to flash a recovery?
zedbra said:
@armyengineer;
you can use unrEVOked to flash the new recovery. if youre a Windows user, download the unrEVOked tool and run the .exe as Administrator. also make sure there are no conflicting s/w on the PC such as HTC Sync and you have all the drivers installed(HBoot, ADB drivers, etc.)
Click to expand...
Click to collapse
This still isn't working for me. Everything appears to go well at the start, then I get:
Waiting for root...(safe to restart if this doesn't work)
At which point the only way I can restart is to pull my battery. After doing so, it reboots and I get:
This was a triumph
It is not, however, any such thing. After another minute I get this:
Internal error: couldn't find misc.
So I've still got my original version of clockwork, 2.0.1.3, despite the fact that ROM Manager is telling me I have 2.5.0.1. I'm obviously missing something here.
BTW, if it matters I'm running CM 6.1.0
armyengineer51 said:
I have similar questions. I was trying to update my version of clockwork also using unrevoked again, but couldn't get it to work. I guess my questions are:
1. Is there any benefit in updating to a newer version of clockwork? My current version is 2.0.x.x and I believe the latest one is 2.5.0.4.
2. Will this same method work to do so? Can I rename the latest clockwork .zip file like this and get it updated?
I thought using the flash clockwork option in ROM Manager would do it, but it doesn't. If I reboot from ROM Manager it goes to the newer version, but if I reboot otherwise it goes to my original. The couple times I've used it, there appears to be maybe some different features/options in the newer one and I feel like I might be missing out on something!
Click to expand...
Click to collapse
Although there is a ClockworkMod 2.5.0.4 version, I don't think it is for the Aria. According to ClockworkMod ROM Manager, 2.5.0.1 is the most current one for the Aria so I am believing what ROM Manager is telling me since it is written by the same the vendor.
I have tried CM 6.1.0
original HTC Aria 2.1 International Rom
and FR001 RC1
all no go. I think it has something to do with the phone already been rooted and has clockworks installed which makes unrevoked unhappy
zyo said:
I have tried CM 6.1.0
original HTC Aria 2.1 International Rom
and FR001 RC1
all no go. I think it has something to do with the phone already been rooted and has clockworks installed which makes unrevoked unhappy
Click to expand...
Click to collapse
OK, let's start from the beginning. You asked about installing an alternate recovery (PSFreedom recovery), but apparently it has its own installation procedure that needs to be run on an unrooted Aria.
What you need is to find just the PSFreedom recovery and copy it to your SD called in a file called LIBEIMG.ZIP and that is how you need to install it on a root phone that has ClockworkMod. Perhaps you need to go back to the PSFreedom thread and ask if a LIBEIMG.ZIP can be produced that can be flashed from HBOOT to replace ClockworkMod.
Looks like everything you need is located in the PSFreedom wiki:
http://psfreedom.com/wiki/HTC_Aria
I got a recovery.bin which is suppose to be used with unrevoked.
are you talking about the same one if I just compress it into a zip file?
All,
I have updated to 2.3.4, lost root as expected and tried to reroot 2.3.4.
I had no luck, once i ran ./Gingerbreak the script would sit and not do anything after displaying the initial text.
Has anyone successfully done this?
I thought about updating with the prerooted 2.3.4, but the devs started to add all sorts of stuff in there, and right now that is not what I am after.
Thanks!
Also anxiously waiting for a 2.3.4 root option.
- No custom boot loader means I can't use the current SU.zip process.
- I didn't unlock the boot loader on the phone and now really don't want to go through the hassle of having the phone reset when I do... too much on it.
- Can't do a nandroid backup (to unlock) because I don't have root.
Catch 22 circle. Am keeping my eyes open, hopefully someone comes up with an alternate method. Once I get root again I will unlock the boot loader after making a backup so this doesn't happen again.
51Cards said:
Also anxiously waiting for a 2.3.4 root option.
- No custom boot loader means I can't use the current SU.zip process.
Click to expand...
Click to collapse
Custom bootloader? Just unlock the one you have and flash a new recovery. It takes a whopping 3 minutes to flash recovery, then SU, and reboot. If you want to keep everything stock so you can OTA, the stock ROM will overwrite the recovery when you boot and you'll end up with rooted stock ROM with OEM recovery. If you want to then flash a custom rom, you can do so through ROM manager.
Want to unroot? Download the FRG33 passimg.zip and boot into bootloader.
This stuff is stupid easy on the N1.
ATnTdude said:
Custom bootloader? Just unlock the one you have and flash a new recovery.
Click to expand...
Click to collapse
Ok so feeling like a newb here.
First I meant 'custom recovery', not 'custom boot loader'... mixup in terms on my part.
But to put in a custom recovery I need to unlock the phone. Once I unlock the boot loader doesn't the phone reset to factory state? I had seen that mentioned several times and in the unlock video I was watching. After the phone was unlocked it went back to "Welcome to Android" etc on the next startup. Have far too much in the phone I don't wish to loose and I can't Nandroid it without root.
Thanks for the info.
I had used Gingerbreak on my 2.3.3 - after 20 seconds of searching on XDA I found that you can simply install ROM Manager, flash RA custom recovery, boot into recovery, remove signature verification, flash update.zip followed by su.zip and you keep root .... all this WITHOUT an unlocked bootloader...
I am attempting to keep my phone as stock as possible and only root to block ads and sometimes push some new app that google wont release to the n1.
I really don't want to mess with custom anything on my daily driver (used for business also). I have my g1 for that
SO....has anyone used gingerbreak successfully on 2.3.4?
Disregard. I misread the post.
MitchRapp said:
I had used Gingerbreak on my 2.3.3 - after 20 seconds of searching on XDA I found that you can simply install ROM Manager, flash RA custom recovery, boot into recovery, remove signature verification, flash update.zip followed by su.zip and you keep root .... all this WITHOUT an unlocked bootloader...
Click to expand...
Click to collapse
Yeah, the ROM manager option would have worked well before I did the OTA for 2.3.4 and lost root. I will keep it in mind for the future, thanks!
I'm sure there's a better, faster, more direct way, but here's how I went from 2.3.4 stock to 2.3.4 rooted without unlocking the bootloader.
1. Flash FRG33 as passimg.zip on SD card.
2. Flash FRG33 to GRI40 as update.zip on SD card using stock recovery.
3. Root GRI40 2.3.3 using Gingerbreak.
4. Install ROM Manager app and install Clockworkmod Recovery.
5. Open GRI40 to GRJ22 update zip file and REMOVE Recovery folder from it.
6. Boot into Clockworkmod Recovery and flash modified update.zip from step 5.
7. Install SU.zip from Clockworkmod right.
Voila! Rooted GRJ22 2.3.4 with locked bootloader. Lot of steps, but I don't think it took more than 10-15 minutes.
Exactly what I did. Works smoothly and you're all set in minutes. As long as you had root in the first place, on 2.3.3.
Sent from my Nexus One using XDA Premium App
DownloaderZ said:
All,
I have updated to 2.3.4, lost root as expected
Click to expand...
Click to collapse
This was the same lesson I learned when I rushed in with Froyo --> GRI40 update the moment it became available. I lost my root and had to wait for Gingerbreak release. Now when they release OTAs, I wait until I understand how to keep the root under the new update before accepting it. Seems like a better approach to me.
Sent from my Nexus One using XDA App
GnatGoSplat said:
I'm sure there's a better, faster, more direct way, but here's how I went from 2.3.4 stock to 2.3.4 rooted without unlocking the bootloader.
1. Flash FRG33 as passimg.zip on SD card.
2. Flash FRG33 to GRI40 as update.zip on SD card using stock recovery.
3. Root GRI40 2.3.3 using Gingerbreak.
4. Install ROM Manager app and install Clockworkmod Recovery.
5. Open GRI40 to GRJ22 update zip file and REMOVE Recovery folder from it.
6. Boot into Clockworkmod Recovery and flash modified update.zip from step 5.
7. Install SU.zip from Clockworkmod right.
Voila! Rooted GRJ22 2.3.4 with locked bootloader. Lot of steps, but I don't think it took more than 10-15 minutes.
Click to expand...
Click to collapse
I'm looking to download all the files for this so I'm set from the start. I found FRG33 here but I haven't found the GRI40 update yet (although I haven't really looked yet either, that's not my question). I'm wondering, the site I listed has FRG83 as well as 33, does it matter which to use? 33 mentions a possible error.
What's the deal?
Thanks,
I think you should be able to use FRG83 instead. All you really need is something that can be named passimg.zip installed by the bootloader itself.
I got the GRI40 update from here:
http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip
GRI22 update:
http://android.clients.google.com/p....signed-passion-GRJ22-from-GRI40.71d2f9ec.zip
That sucked!!! I lost all my settings and apps when I moved back to froyo?? I wasn't expecting that
Oh yeah, I forgot about that. Flashing PASSIMG.zip wipes out everything because it's a full flash.
brettbellaire said:
That sucked!!! I lost all my settings and apps when I moved back to froyo?? I wasn't expecting that
Click to expand...
Click to collapse
There is no way to downgrade Android without wiping everything, as a downgrade is only possible with leaked shipped ROMS (i.e., ROMs that re-write the entire NAND flash memory on the device...
droidexplorer said:
This was the same lesson I learned when I rushed in with Froyo --> GRI40 update the moment it became available. I lost my root and had to wait for Gingerbreak release. Now when they release OTAs, I wait until I understand how to keep the root under the new update before accepting it. Seems like a better approach to me.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I do that as well now. However I have some steps I figured out that work for me. It's more direct (only 2 flashes, plus su), but you have to pay attention. If you didn't already have a CWM backup though, it will wipe everything:
1) Flash to FRG33 using PASSIMG_Passion_Google_WWE_2.16.1700.1_FRG33_release_signed.zip (rename to PASSIMG.ZIP), takes you to 2.2
2) Root using Super-One-Click
3) Install ROM Manager and flash CWM
4) Flash b90257ed8cd3.signed-passion-GRJ22-from-FRG33-121341.b90257ed.zip, takes you directly to 2.3.4
5) DON'T LET PHONE REBOOT into Android, go to recovery then Flash su-2.3.6.1-ef-signed.zip
6) Remove/rename /system/etc/install-recovery.sh via ADB
7) If you have a recent backup, use CWM to 'advanced restore' the data portion.
8 ) Profit! (or root)
Step 5 may require explanation:
Android will reboot at least once during the flash, this is ok, as it loads right back into recovery. However after the second reboot, it will boot normally. You must INTERRUPT this boot process (hold power button, battery pull, etc). At this point CWM is still on there (don't know why, I thought flash was going to wipe it).
The reason you have to interrupt the boot process (for anyone who doesn't know) is because of the install-recovery.sh script. Stock android will automatically flash the stock recovery on bootup.
So boot into CWM, then flash su. After bootup up again, CWM will be gone, but we have root! So remove (I renamed) that file (/system/etc/install-recovery.sh), then reflash CWM using ROM Manager.
EDIT: After posting this, I had a thought: it should be possible to remove install-recovery.sh via CWM using ADB. That would remove the step of reflashing CWM a second time. I updated the step-by-step, but left the explanation as-is.
When I originally wrote these steps a few months ago, gingerbreak wasn't released. So I don't rely on it.
Just wondering, but would you always be safe and able to root by flashing SU.zip if you just never let it overwrite the custom recovery?
I thought you can always pull out the Recovery folder from the update zip file and it won't overwrite your custom recovery. Granted, that will require you to download updates manually rather than OTA, but that's easy enough.
GnatGoSplat said:
Just wondering, but would you always be safe and able to root by flashing SU.zip if you just never let it overwrite the custom recovery?
I thought you can always pull out the Recovery folder from the update zip file and it won't overwrite your custom recovery. Granted, that will require you to download updates manually rather than OTA, but that's easy enough.
Click to expand...
Click to collapse
In theory. It does seem to work for other devices (gTablet). I haven't had much luck with modifying the updater-script inside the zip file however. Whenever I change one, I get errors when I flash the zip. That's why I haven't tried that method.
I wanted to make my own flashable zips to tweak ROMs on my own, but never could get it to work, so I abandoned my work.
In addition though, you could just try to replace the recovery.img in the zip file with CWM. That might work too, as long as signature verification is off. I don't remember if I tried that.
EDIT: Forgot one key thing: Doing this won't prevent the OS from reflashing the stock back anyway on bootup (using install-recovery.sh). You MUST remove that file regardless, if you're on a stock ROM. If you want to remove that from the zip you can, but again requires updater-script changes. However if you want to OTA, then I'd recommend just renaming it, since some OTA's update that file. That way you can rename it back for the update.
On the GRI40 to GRJ22 update, I didn't have to do anything too complicated like modifying scripts. I simply yanked the Recovery folder out of the update and that seemed to do the trick with no error messages and CWM still intact.
First time posting although I've been lurking for quite a while so hopefully I don't get flamed out of here on my first attempt.
I tried posting this under another thread in Q&A but was not getting a response and I'm anxious to try and get to where I could start flashing some ROMs . As far as I know I've done everything correctly but I'm sure I'm missing something. I don't mean to double post this but like I said I'm really anxious to get started.
First I did root my Evo using unrevoked 3, all seemed to go well and correctly as I ended up with S-OFF, superuser app, etc. I created a backup and everything, (still running stock Sense ROM.) Do I need to try using Unrevoked Forever now?
I started reading posts about backing up RSA keys and WiMAX partitions etc and when I connected the phone (yes usb debugging and charge only); opened a command prompt and browsed to the ADB directory I never get the # confirming I have root access. (I only get the $)
Now from what I'm reading Clockwork mod backs up the WiMax anyway but I still wanted to walk through the process to get more familiar with it. I guess my first question is do I really need to back up the partition and keys if I have a successful nandroid backup?
Also I installed root check and the under the basic setting it said I had no root access, and then under the advanced setting it said I did.
I tried installing Ti backup and clicking under problems to install busy box thinking that may be the problem, but I don't see the setting it describes there where I can change to install busybox.
Finally I also downloaded the busybox installer. It gives two options of where to install it in either /system/bin/, or /system/xbin/....does it matter? Will installing it this way be ok or do I need to push through ADB? If I need to push through ADB then obviously I need to get my # root access figured out.
Thanks in advance to anyone who can try and help me make heads or tails of this situation.
Radio: 2.15.00.11.19
Software Number : 3.70.651.1
Hardware Version: 0003
HBoot: 2.10.0001
I would recommend your next step would be to flash over from clockwork to amon ra.
http://forum.xda-developers.com/showthread.php?t=705026
Download the PC136IMG.zip and place it on the root of your SD card. Update it through HBOOT. Once that is done do a nand back up of your wimax keys. Then proceed to download a rom to your liking and flash.
im0rtalz said:
I would recommend your next step would be to flash over from clockwork to amon ra.
http://forum.xda-developers.com/showthread.php?t=705026
Download the PC136IMG.zip and place it on the root of your SD card. Update it through HBOOT. Once that is done do a nand back up of your wimax keys. Then proceed to download a rom to your liking and flash.
Click to expand...
Click to collapse
Yes, flash over to the Amon RA recovery. You might need to delete the PC36IMG.zip file after installing so that it will not ask you again to update.
Then you could just download the superuser app from
http://goo-inside.me/superuser/su-2.3.6.2-efgh-signed.zip
copy it to the root of your SD card, and then install that from RECOVERY in Hboot menu.
Okay I verified that if you have s-off you will be able to get root back on your phone if you run the RUU.
As expected the RUU did unroot my phone but it didn't touch s-off. So I downloaded CWM 3.0.0.8 from dougpiston.com and changed it to PB31IMG.zip (this has to be a flashable zip file to work) and it loaded from hboot no problem. I then downloaded the latest superuser app using ROM Manager, version 2.3.6.3 efgh, older versions will not work, and just flashed it through recovery. Superuser does not need to be renamed update.zip you can just leave the name as is and select let me choose zip from sdcard and it installs just fine.
Took a while for me to get superuser running again as I had an older version and I could only find the newest version in ROM Manager.
****YOU MUST HAVE S-OFF FOR THIS TO WORK*********************
kzoodroid said:
Okay I verified that if you have s-off you will be able to get root back on your phone if you run the RUU.
As expected the RUU did unroot my phone but it didn't touch s-off. So I downloaded CWM 3.0.0.8 from dougpiston.com and changed it to PB31IMG.zip (this has to be a flashable zip file to work) and it loaded from hboot no problem. I then downloaded the latest superuser app using ROM Manager, version 2.3.6.3 efgh, older versions will not work, and just flashed it through recovery. Superuser does not need to be renamed update.zip you can just leave the name as is and select let me choose zip from sdcard and it installs just fine.
Took a while for me to get superuser running again as I had an older version and I could only find the newest version in ROM Manager.
****YOU MUST HAVE S-OFF FOR THIS TO WORK*********************
Click to expand...
Click to collapse
I can't seem to find a link to to superuser inside ROM Manager. Can you tell me where to locate it?
thanks,
John
under download rom > extras
kzoodroid said:
under download rom > extras
Click to expand...
Click to collapse
You can also get it from here
Thanks to you both. I didn't even click on the Download ROM because it's premium and I'm still getting my feet wet with the whole root thing. I'm off to try the GB RUU w/radio and then re-root.
What if you have s-on?
You can only re-root if you have s-off. S-on blocks you from replacing the stock recovery with a custom recovery and blocks the installation of superuser into the system folder.
Eventually the Unrevoked team will come up with a new way to root phones but this most likely won't happen till the OTA actually starts to drop and people report how they lost root. And then who knows how long it will take them to do it. Could be a few days to a few months.
kzoodroid said:
You can only re-root if you have s-off. S-on blocks you from replacing the stock recovery with a custom recovery and blocks the installation of superuser into the system folder.
Eventually the Unrevoked team will come up with a new way to root phones but this most likely won't happen till the OTA actually starts to drop and people report how they lost root. And then who knows how long it will take them to do it. Could be a few days to a few months.
Click to expand...
Click to collapse
Jeez, can't believe I screwed myself like that. I'm a regular root/flasher, and no idea how to get my fix now..
deadsoulboy said:
Jeez, can't believe I screwed myself like that. I'm a regular root/flasher, and no idea how to get my fix now..
Click to expand...
Click to collapse
I ran the RUU with all expectations of not being able to re-root my phone just so I could test if the OTA would change the security settings on my phone. I also still wasn't sure if I could even get root back if it was still s-off so I was willing to experiment with knowing full well what could happen. From past experience with the Eris and losing root for about 3 months you have to flash these leaks with all expectations that it will break your phone and not sweat it too much if it does as eventually someone will find a fix.
kzoodroid said:
I ran the RUU with all expectations of not being able to re-root my phone just so I could test if the OTA would change the security settings on my phone. I also still wasn't sure if I could even get root back if it was still s-off so I was willing to experiment with knowing full well what could happen. From past experience with the Eris and losing root for about 3 months you have to flash these leaks with all expectations that it will break your phone and not sweat it too much if it does as eventually someone will find a fix.
Click to expand...
Click to collapse
You're absolutely right. I have no doubt in my mind someone will come up with a way to root 2.3 on the INC
Alright, I've got s-off, downloaded the superuser 2.3.6.3 efgh app from the ROM manager butttt... now what? I've tried to boot into recovery but I just get an icon of a phone with an exclamation mark inside of a triangle, which I'm assuming isn't good.
Flash clockworkmod recovery first, then the superuser zip.
I tried that but it gives me an error saying: "An error occurred while attempting to run privileged commands!".
If you flashed the GB RUU and lost root and/or s-off.
Someone correct me please if I'm wrong but couldn't you download the froyo RUU and load it then root and s-off?
Sent from my ADR6300 using XDA App
How are you trying to flash it? I'd recommend getting the 3.0.0.7 (AMOLED) or 3.0.0.8 (SLCD) recovery from www.dougpiston.com. Flash in hboot. Or is that how you're doing it?
deadsoulboy said:
You're absolutely right. I have no doubt in my mind someone will come up with a way to root 2.3 on the INC
Click to expand...
Click to collapse
The Eris had a manual method (race method) for rooting the phone but I could never find one posted for the Inc. It involved having the phone connected to a pc with adb running and then taking out the sdcard and rebooting, at a certain point of the boot process you counted to 4 and then pushed the sdcard back in. If you did it correctly adb was able to connect to the phone and you could slip a custom recovery and su in. It was rather complicated and only a handful of people ever did it correctly myself included and it was eventually replaced by a one-click method. The one-click method still pretty much does the same thing you just don't have to manually remove the sdcard or have the phone connected to a pc. In some ways the Eris has a lot more support from its community than the Inc does probably because it was Verizons first android phone.
k_nivesout said:
How are you trying to flash it? I'd recommend getting the 3.0.0.7 (AMOLED) or 3.0.0.8 (SLCD) recovery from www.dougpiston.com. Flash in hboot. Or is that how you're doing it?
Click to expand...
Click to collapse
I second this it has to be a flashable version (contains android-info text file + the recovery image) to work. I used the 3.0.0.8 file from doug pistons website which is already to go just needs to be renamed PB31IMG.zip and make sure it isn't being named PB31IMG.zip.zip as file extensions can be hidden especially if you are renaming it on a pc. I downloaded it directly to my phone and renamed it there so the extension wasn't hidden.
swskeptic said:
Alright, I've got s-off, downloaded the superuser 2.3.6.3 efgh app from the ROM manager butttt... now what? I've tried to boot into recovery but I just get an icon of a phone with an exclamation mark inside of a triangle, which I'm assuming isn't good.
Click to expand...
Click to collapse
I beleive that is becasue you stil have the stock recovery? Did you flash the clockwork recovery from dougpiston.com?
I flashed the clockwork mod recovery 3.0.0.7 from dougpiston via hboot.
I tried several different ways to boot into recovery to flash the superuser app but it isn't working. When I try to do it from the clockword mod app it says the same error: "An error occurred while attempting to run privileged commands!".
I tried to manually download the superuser .zip and boot into recovery from the hboot menu, but it still gave me that same phone icon with the exclamation mark and triangle and then nothing.
swskeptic said:
I flashed the clockwork mod recovery 3.0.0.7 from dougpiston via hboot.
I tried several different ways to boot into recovery to flash the superuser app but it isn't working. When I try to do it from the clockword mod app it says the same error: "An error occurred while attempting to run privileged commands!".
I tried to manually download the superuser .zip and boot into recovery from the hboot menu, but it still gave me that same phone icon with the exclamation mark and triangle and then nothing.
Click to expand...
Click to collapse
First thing are you getting into recovery from the hboot menu? And you can't get into recovery from ROM Manager because you need superuser installed to do it that way. It still sounds to me like you don't have ClockworkMod Recovery installed. Maybe only version 3.0.0.8 works I'm not sure but that version is for both amoled and SLCD screens. So either try reflashing your copy of 3.0.0.7 or try flashing 3.0.0.8. I do think I had to flash the recovery a couple times to get it to stick.
Hi, everyone who have been waiting for a way to downgrade their HBOOT so that they can get S-OFF, cause they upgraded to the Official RUU Rom... I think I found a solution for you!
Also give you permanent ClockWork Recovery!
I haven't test it on any other Slide, cause I have only one. So, sorry if it didn't work for you.
Here is what I did, in case you're wondering, I downloaded the Official RUU from HTC Support website, extracted the 'rom.zip' file from Windows Temp folder that it creates, replaced the newer 1.02 HBOOT with 0.52 HBOOT, that I got from 'ESPRIMG.zip' (the Stock rom).
And also replaced the recovery.img with ClockWork Recovery img file.
Then I just renamed the 'rom.zip' file to 'ESPRIMG.zip'
Put it in the root of my memory card, powered off, rebooted into BOOTLOADER, and it detected the file and asked me if I wanted to update, I chose YES, and it went on without a hitch. Next thing I knew, I had 0.52.0000 HBOOT, with permanent ClockWork Recovery(so I dont have to use 'update.zip' anymore), and also the Official Latest 2.15.531.3 unmodified rom, (I like stock Espresso, that's why I bought it ) but you will LOSE ROOT but SuperOneClick method works for me to gain root - http://forum.xda-developers.com/showthread.php?t=803682
Method:
1. Download this 'ESPRIMG.zip' file - http://www.mediafire.com/file/cuemg74en7kk0a3/ESPRIMG.zip
2. copy/paste it to your memory card, in the root, not on any folder.
3. Make sure your card formatted to FAT32 file system, or it won't detect it.
4. Do a Nandroid BACKUP, if you can, cause I don't know if this will work for you. But it will wipe all your data and setting. SO BACKUP!
5. First you need to wipe data and factory setting, and wipe cache and wipe davlik cache (Otherwise it bootlooped for me). So boot into recovery first!
You can do that by going into BOOTLOADER first then selecting Recovery ( for that remove memory card from mobile or else it will start update) or if you have ROM Manager then you can use that to reboot into Recovery, any recovery will do stock or clockwork.
6. Ok, so after Wiping from recovery. PULL battery, then insert back the memory card with ESPRIMG.zip file on it. Reboot into BOOTLOADER, and apply the update.
It should do a reboot automatically to downgrade the HBOOT.
You will see the change if it worked. After applying the update, reboot phone normally.
And if all done correctly, you should have 0.52.0000 HBOOT, and also a permanent ClockWork Recovery. Now you can root by using SuperOneClick method. And also get S-OFF (I didn't need it, cause I have permanent S-OFF! , at least that's how I explain it)
Im guessing it worked for me because I have a factory unlocked S-OFF HBOOT from HTC. Because, to try this out first, I updated my phone via the OFFICIAL RUU from HTC Support Website and it showed S-OFF on my 1.02.0000 HBOOT.
Then I tried this method and it did downgrade my HBOOT and I still had S-OFF without doing the AlphaREV method.
So I guess I have a kind of permanent S-OFF??! :S :?
Hit thanks if it helped.
I am no developer but I am learning
Any feedback would be appreciated.
And yes, my major is CS and I LOVE IT!
any one test this yet?
If i try this and it does not downgrade my HBOOT will my phone be bricked? Will I lose root? I would love to try, but would like a little certainty.....
DylanTheVillian said:
If i try this and it does not downgrade my HBOOT will my phone be bricked? Will I lose root? I would love to try, but would like a little certainty.....
Click to expand...
Click to collapse
I don't think that you phone will be bricked, it would just not downgrade it but the HBOOT will remain. Yes you will lose root, but that can be gained easily by SuperOneClick Root Method.
I not certain myself about the brick. Flash at your own risk.
Could you provide a download link of your ESPRIMG.zip?
lvzhuyiyi said:
Could you provide a download link of your ESPRIMG.zip?
Click to expand...
Click to collapse
LINK updated in main post.
Good job thnx
MamaRisha said:
Good job thnx
Click to expand...
Click to collapse
Did it work?
has this worked for anyone?
I'll be trying it once the download finishes for me. I'll update you guys on whether or not it worked for me.
I'm using a full stock phone btw, factory reset and blank sdcard as well. Hopefully this works for me.
UPDATE:
Looks like this was a dud.
I applied the update 3 times to my phone, but my Hboot still didn't downgrade. It's still on 1.02.0000. Also didn't flash the permanent Clockwork Recovery that we were hoping for either.
I'm guessing your permanent s-off is what let you use this successfully. So for anyone who has S-OFF already this would probably work fine.
On the plus side, it didn't brick me =)
AlanB412 said:
I'll be trying it once the download finishes for me. I'll update you guys on whether or not it worked for me.
I'm using a full stock phone btw, factory reset and blank sdcard as well. Hopefully this works for me.
UPDATE:
Looks like this was a dud.
I applied the update 3 times to my phone, but my Hboot still didn't downgrade. It's still on 1.02.0000. Also didn't flash the permanent Clockwork Recovery that we were hoping for either.
I'm guessing your permanent s-off is what let you use this successfully. So for anyone who has S-OFF already this would probably work fine.
On the plus side, it didn't brick me =)
Click to expand...
Click to collapse
Well thanks for the feedback, yes I think its the permanent S-OFF too. So does that mean I have a phone that was permanently UNLOCK my T-mobile or HTC it self for testing purposes? Is there some way to use this to unlock that 1.02.0000 HBOOT?
any updates on how to downgrade?
i need to downgrade my Espresso, i have the latest official t-mobile update.
i have already followed instructions very carefully missing no details.
i have searched everywhere and tried everything. thank you.
ESPRESSO PVT SHIP S-ON
Hboot: 1.02.0000
MICROP-0620
TOUCH PANEL-SYNW0101
RADIO-7.15.35.16
Nov 26 2010,20:43:01
'ESPRIMG.zip' cannot be downloaded
Gold Card
Would using a GoldCard get us around this problem?