Database Users

(SOLVED) Problems with Belkin N Wireless Router

Ok I have search a good bit online surfing the net, and 3 calls to Belkin 3 calls to T-mobile and nothing. Now my wifi works everywhere else, and my labtops connect just fine to the router but it seems like the Belkin N has something blocking it (even tried a shadow with original ROM and would not connect). So I took all the security opitions off along with the firewall and it still failed to connect. If anyone has any solutions or ideas I am willing to try. Thanks guys
(SOLVED WITH US FIRMWARE)

is routerset to b/g/n ?
has router got mac security set-up?

nolovelust said:
is routerset to b/g/n ?
has router got mac security set-up?
Click to expand...
Click to collapse
It is set for B/G/and N. And i dont know about the mac security set-up. But I have tried setting it to just G or B and N and nothing. Tell me more about this mac security set-up.

There is nothing wrong with your phone. The shadow/juno has an internal wireless card that only supports b/g wifi and it's currently not compatible with n radio signals. It will work perfectly with b/g wireless networks. So, if your router has a b/g/n setting, set it to that, but do not set the security settings into a newer format, stick with wep2 or wep and it should work with no problem. If you leave it on n setting only, the internal wireless card in the shadow will not support it. You also have to remember that n wireless is not that widely used and its barely catching on. Many new electronics are still being made with b/g internal wireless cards because they are widely avaliable and come in smaller sizes suitable for phones like the shadow. Currently n wireless cards are fairly expensive and i doubt it will be made avaliable on phones anytime soon as cost would be too high for manufacturing. Hope this helps.

-AC- said:
There is nothing wrong with your phone. The shadow/juno has an internal wireless card that only supports b/g wifi and it's currently not compatible with n radio signals. It will work perfectly with b/g wireless networks. So, if your router has a b/g/n setting, set it to that, but do not set the security settings into a newer format, stick with wep2 or wep and it should work with no problem. If you leave it on n setting only, the internal wireless card in the shadow will not support it. You also have to remember that n wireless is not that widely used and its barely catching on. Many new electronics are still being made with b/g internal wireless cards because they are widely avaliable and come in smaller sizes suitable for phones like the shadow. Currently n wireless cards are fairly expensive and i doubt it will be made avaliable on phones anytime soon as cost would be too high for manufacturing. Hope this helps.
Click to expand...
Click to collapse
Ok I understand that but I have tried that already with all my security off set on just G/B and by them self's also and it still will not connect. I went threw all of this on the phone with T-mobile and Belkin. But I appreciate the help.

suasp0nte said:
Ok I understand that but I have tried that already with all my security off set on just G/B and by them self's also and it still will not connect. I went threw all of this on the phone with T-mobile and Belkin. But I appreciate the help.
Click to expand...
Click to collapse
i have the same problem

d*mn!
has anyone sort this thing out yet?
i have the same issue using stock TMO's ROM...

Just for the sake of discussion, I'm assuming that all of you have T-Mobile Shadow phones that work fine with other wireless routers or public access points? Any problems when turning on security settings on other wireless networks (those that you or your friend can manage)?
If the problems persist with other wireless networks while using your Shadow, chances are that your Shadow's wireless card is faulty, which is not unheard of.
Please comment on your phone's status.
Also, which model of Belkin N router are you all having problems with?
All N routers are typically backward compatible so setting them to mixed mode (B/G/N) would not affect the Shadow's Wifi capabilities.
AC, there's never a wep2...I guess you meant WPA & WPA2.

scenarios
First scenario:
Home
NETGEAR 802.11g/b WIRELESS ROUTER WITH WPA-PSK
RESULTS: fine.. shadow is working great on TMO's and erofich's rom
Second scenario:
GirlFriends HOUSE
NEXXT WIRELESS 802.11g/b WIRELESS ROUTER WITH WEP (cheap stuff)
RESULTS: Excellent, shadow is working fine on both roms
Third Scenario
MACDONALDS ROUTER
UNKOWN ROUTER WITHOUT SECURITY
RESULTS: FINE... Shadow gets connection.
----------------------------------------------------------
Last Scenario
OFFICE
Belkin N-Wireless Router F5D8233-4v3(01) with latest firmware update
Result: No way to get Shadow connected. Even WIthout Encryption, MAC address control off, B & G & N bands, UPNP Off, but my laptop does get WiFi Connection (just 11g compliant WiFi card)

Just to point out, I have the same problem with my Belkin Wireless N router. In the office, I can jump onto our Netgear Wireless N router without a problem. I also have no problem jumping onto any free McDonalds networks, the networks at friends' places, or the free network in the CambridgeSide Galleria out here near Boston. This is definitely not an isolated issue. Nobody with a Shadow can get on my home network.

Customer Call Details Nov 13 2008 04:37
I have an HTC Touch that can connect to other hotspots, but not to my home Belkin router. Sometimes, if there is another connection available, it can see the router, and says that it is Available, but cannot connect; other times it won't even see it. I have checked for firmware updates, but I have the latest. Any help would be greatly appreciated.
Belkin Response Nov 14 2008 22:18
Hi Lilburd,
Thank you for contacting Belkin Technical Support.
We understand that the HTC Touch does not connect to the router. We apologize for the inconvenience caused.
Please follow the steps given below to update the firmware and configure the router:
We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.
Please download the latest firmware on the router from the link given below. Download the file "3.01.29":
http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=10288&scid=0
and save it to the computer.
- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.
Please follow the steps given below for configuring the router:
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables.
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.
If the connection type is Dynamic (cable):
- Choose "Dynamic" and then click on "Next".
- Type in your “Host Name”, if your Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes".
If the connection type is PPPOE (DSL):
- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen.
Internet Status should show "Connected" on the top right hand corner of the web page.
If the problem persists, please get back to us with the following information:
1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”.
4. If the internet connection is stable on the computers using the router?
5. If the HTC Touch detects and connects to other networks in the neighborhood?
Lilburd, if you need further assistance please feel free to write back to us and we will be happy to assist you.
Regards,
Belkin Technical Support.
This was the response I got when I e-mailed Belkin, and it worked like a charm

You Solved This Issue
DUDE, Im using the F5D8133 4v3.. thatss the US version..
the latest firmware on the US support page was 3.01.17 if i remember right,
on the BELKIN UK Support page is 3.01.29 and guess what i updated the firmware to the one in UK site .... and....
IT DOES WORK LIKE A CHARM!
FINALLY I HAVE WIFI
bless you and the techsupport guy @ belkin uk

fenix_tx40 said:
DUDE, Im using the F5D8133 4v3.. thatss the US version..
the latest firmware on the US support page was 3.01.17 if i remember right,
on the BELKIN UK Support page is 3.01.29 and guess what i updated the firmware to the one in UK site .... and....
IT DOES WORK LIKE A CHARM!
FINALLY I HAVE WIFI
bless you and the techsupport guy @ belkin uk
Click to expand...
Click to collapse
The same happened to me. I also have a Belkin pre-n router and my HTC Tytn wouldn't get wifi, no matter how or what I tried. I read your comment yesterday and, although the no-so-great new firmware check utility on the web interface said there was no new firmware available, I checked the USA and UK sites, since the Spanish site doesn't even show this router anymore. I downloaded 3.01.29 from the USA site and now my HTC Tytn is getting wifi at last. Thanks a lot, you saved my day.

Wireless tether to a wireless router??

So, I'm getting a tablet and Seagates wireless hard drive to use with it. The only thing is I won't be able to tether to my phone if using the hard drive, so I was thinking of getting a mini wireless portable router.
My question is, how can I get my phone to tether to a wireless router (say a DLINK g730ap) so my tablet can access the Internet and the hard drive within the DLINK? Unless I use the Android Tether as a router, where the hard drive connects to the phone and the tablet connects to the same phone. But I don't know what the transfer speeds are going to be, I imagine it would probably be slow, but I'm not sure.
I hope this makes sense, thanks!!!

groovdafied said:
So, I'm getting a tablet and Seagates wireless hard drive to use with it. The only thing is I won't be able to tether to my phone if using the hard drive, so I was thinking of getting a mini wireless portable router.
My question is, how can I get my phone to tether to a wireless router (say a DLINK g730ap) so my tablet can access the Internet and the hard drive within the DLINK? Unless I use the Android Tether as a router, where the hard drive connects to the phone and the tablet connects to the same phone. But I don't know what the transfer speeds are going to be, I imagine it would probably be slow, but I'm not sure.
I hope this makes sense, thanks!!!
Click to expand...
Click to collapse
I think I understand what you want to do, and it's something I did not too long ago. I actually wanted to see if I could use Sprint Hotspot on my EVO, tethering at 4G, as a replacement for my xfinity internet. The problem is, the router I use requires an Ethernet connection as it's internet input, so I wasn't even sure it was possible. But, apparently, it is. I had to change the firmware on my router, though. If you're trying to do something similar, that's likely what you'll have to do. I got my modded firmware from dd-wrt. But there are a LOT of warnings, and just like upgrading the firmware on your phone can lead to a brick if done incorrectly, the same goes for the router.
I actually couldn't get it to work using Wireless Tether for root users; it only worked with the native Sprint Hotspot, so unless you're paying for the service, it might not be possible. And your bandwidth will be very limited, so don't expect very fast transfer speeds.

Router
You have 2 separate hurdles to cross-
1. DD-WRT compatible Router to handle all 3 devices communication
2. "Wireless Tether" does not create an actual router, it creates an Ad-Hoc based connection using basic ICS, and typical network/routing functions are not available. If you don't want to use Sprints Hotspot app, you will need to get specific instructions on DD-WRT's forum on how to properly configure this type of setup and use your router as a gateway. I'm sure the information is probably posted already somewhere over there. Head over there and start digging. They are to routing as XDA is to mobile phones.

im running this setup now with my phone and xbox and whatever else. like has been mentioned you need to put ddrt on your router and configure it as an ap bridge. then you have to link it to the ....wtf..hold on ill link you.
http://www.dd-wrt.com/wiki/index.php/Wireless_Bridge#Instructions

Yeah that's the way to go, I use ddwrt in client mode so it pulls my wireless tether from my phone and sends the signal out through the cat5 or 6 cable to whatever is wired to the router. But repeater/bridge mode would be needed to send wired signal and also repeat the signal through the antenna for broadcasting wifi from the router.
Sent from my PC36100 using xda premium

I can't figure out how to use this. I turn on WiFi tether, Wifi itself turns off on the phone. Now, I have a WNR3500L with the toastman tomato mod, and I can't figure out how to get it to work with this.

Wifi Issues on wireless N

Hi all,
Does anyone else have issues using their i337 on wireless N? When mine connects, then after a minute or 2 the phone is not able to get access to the internet. I have to reset the router or cycle the wireless on the phone to get it back. If I force the router to only use wireless G, the phone wifi works great.... I have also tried resetting the router to factor, but no change....
any advice/thoughts?
Thank you in advance!

dahunt said:
Hi all,
Does anyone else have issues using their i337 on wireless N? When mine connects, then after a minute or 2 the phone is not able to get access to the internet. I have to reset the router or cycle the wireless on the phone to get it back. If I force the router to only use wireless G, the phone wifi works great.... I have also tried resetting the router to factor, but no change....
any advice/thoughts?
Thank you in advance!
Click to expand...
Click to collapse
What Model and brand is your router? Your most likely going to need a new router, as it Would be its fault and not the phone. If its D-Link then that should be self explanatory lol

I'm having the same issue with my S4 and my D-Link DIR-655 router. Wireless N allows me to connect to the router and obtain an IP address on the network, but I get no internet connection. If I default the router to only use g and b, it connects fine with internet.

CATCubano said:
I'm having the same issue with my S4 and my D-Link DIR-655 router. Wireless N allows me to connect to the router and obtain an IP address on the network, but I get no internet connection. If I default the router to only use g and b, it connects fine with internet.
Click to expand...
Click to collapse
Your just going to have to get a new router. D-Link mostly the older ones are nortrius for having issues like this. Depends on your internet speed and what you do over wireless more than 90% of people dont even need wireless N

CATCubano said:
I'm having the same issue with my S4 and my D-Link DIR-655 router. Wireless N allows me to connect to the router and obtain an IP address on the network, but I get no internet connection. If I default the router to only use g and b, it connects fine with internet.
Click to expand...
Click to collapse
D-Link = bad router. Google it and you'll see all the problems it has been causing people for years.
As far as Wireless N, it's new enough that I'm guessing that Samsung and the router people both have some updating before it's as good as it should be

alacrify said:
D-Link = bad router. Google it and you'll see all the problems it has been causing people for years.
As far as Wireless N, it's new enough that I'm guessing that Samsung and the router people both have some updating before it's as good as it should be
Click to expand...
Click to collapse
Yea The S4 has AC support I think, Which is the NEW standered. So It would deffantly have 100% Wireless N support haha

hyelton said:
Yea The S4 has AC support I think, Which is the NEW standered. So It would deffantly have 100% Wireless N support haha
Click to expand...
Click to collapse
My Netgear router is only 6 months old, and doesn't have N support, since it requires multiple IO transmission. And MIMO has been a mess for manufacturers. So A) it might not work well from the phone side and B) any D-link router would probably work as well as you'd expect.

alacrify said:
My Netgear router is only 6 months old, and doesn't have N support, since it requires multiple IO transmission. And MIMO has been a mess for manufacturers. So A) it might not work well from the phone side and B) any D-link router would probably work as well as you'd expect.
Click to expand...
Click to collapse
Its only G?? Wireless N has been the latest standered since 2007. Anything more than $20 for a wireless router thats not Wireless N today you paid too much. Bur AC is a WHOLE need thing. The Cheapest AC router is $160 and I think is kind of pointless for a mobile phone.

hyelton said:
Its only G?? Wireless N has been the latest standered since 2007. Anything more than $20 for a wireless router thats not Wireless N today you paid too much. Bur AC is a WHOLE need thing. The Cheapest AC router is $160 and I think is kind of pointless for a mobile phone.
Click to expand...
Click to collapse
2009. And I didn't need MIMO since nothing I had supported it. And you're right about AC, I'm not upgrading the router just to get that - G doesn't carry through the walls in my house well enough to use. AC probably would, but I don't need the power draw.

alacrify said:
2009. And I didn't need MIMO since nothing I had supported it. And you're right about AC, I'm not upgrading the router just to get that - G doesn't carry through the walls in my house well enough to use. AC probably would, but I don't need the power draw.
Click to expand...
Click to collapse
I have an RT-N16 and love it, the main thing I look for is Gigabit ethernet I have a server and a lot of big transfers are needed. I have a network of about 25 total devices.

I'm also having this problem. Why are people so quick to say it is the router's fault? Every other wireless device in my house works flawlessly, every person who visits me and connects to my wi-fi has zero issues. My GS4 is the only thing to ever have issues in fact.
I'm running DD-WRT on a Linksys WRT160-Nv3. Linksys and D-Link are probably the most commonly sold consumer router's here in the states. Your average person goes to Walmart, buys the 60 dollar router, and leaves. If Samsung can't design a phone that works with these common types of routers, then the problem is on their end.
Telling someone they need to go out and replace their router is really not an answer, using the reason "D-Links suck, your router is the problem" is opinion, not fact.
/rant.

VM Super Hub 1

Is there anyway of using the super hub 1 from virgin media to act as a wifi extender/repeater?
I currently have a super hub 2 connected but in some spots of the house i cant access wifi or its a poor signal so o was tjinking if it is possible to create a wifi extender from the super hub 1? Any help would be appreciated, and thanks.

skyla20 said:
Is there anyway of using the super hub 1 from virgin media to act as a wifi extender/repeater?
I currently have a super hub 2 connected but in some spots of the house i cant access wifi or its a poor signal so o was tjinking if it is possible to create a wifi extender from the super hub 1? Any help would be appreciated, and thanks.
Click to expand...
Click to collapse
It is possible, the easest way is to first change some settings on your old hub, you will need to disable built in features such as the DHCP, secondly you may need to change the old hubs ip, if it is the same as the new one, to prevent a ip address conflict (for example, if they are both using 192.168.1.254 though if yours is an old netgear tg834? Then its probably using 192.168.1.1) , now assuming your old super hub supports the same wireless encryption as the new one, match the wireless ESSID (name) and encryption password (And type! Such as wpa2) so that they appear as the same Wireless network (distributed wireless) and the easesst and most supported method is to then link the two devices via ethernet and place one of them somewhere else in the building where it can provide a signal in the blindspots of your primary superhub.
Also a side not.. If i recall, the most recent superhub uses 802.11n on 5GHz, which does not boad well in old victorian houses, and new ones made with lots of metal strips between plaster boards.. 2.4GHz works better at penetrating walls, so check you dont have this option set to 5GHz under the wireless settings.

tytiger said:
It is possible, the easest way is to first change some settings on your old hub, you will need to disable built in features such as the DHCP, secondly you may need to change the old hubs ip, if it is the same as the new one, to prevent a ip address conflict (for example, if they are both using 192.168.1.254 though if yours is an old netgear tg834? Then its probably using 192.168.1.1) , now assuming your old super hub supports the same wireless encryption as the new one, match the wireless ESSID (name) and encryption password (And type! Such as wpa2) so that they appear as the same Wireless network (distributed wireless) and the easesst and most supported method is to then link the two devices via ethernet and place one of them somewhere else in the building where it can provide a signal in the blindspots of your primary superhub.
Also a side not.. If i recall, the most recent superhub uses 802.11n on 5GHz, which does not boad well in old victorian houses, and new ones made with lots of metal strips between plaster boards.. 2.4GHz works better at penetrating walls, so check you dont have this option set to 5GHz under the wireless settings.
Click to expand...
Click to collapse
Ok i will check all that out soon as i have time but thanks also. The house is made in 1970's it is strange that im not getting good signal in the garage room the wireless hub is situated in the living room downstairs then theres a brick wall then the hall way withthe stairs in the middle another small brick wall which leads to the garage room. I get signal but its poor. Would a netgear wifi extender work the one on the net for about £40 if the super hub 1 idea didnt work?
Sent from my iPhone using Tapatalk

skyla20 said:
Ok i will check all that out soon as i have time but thanks also. The house is made in 1970's it is strange that im not getting good signal in the garage room the wireless hub is situated in the living room downstairs then theres a brick wall then the hall way withthe stairs in the middle another small brick wall which leads to the garage room. I get signal but its poor. Would a netgear wifi extender work the one on the net for about £40 if the super hub 1 idea didnt work?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes, any off the shelf Signal "Booster" device should work, I use one at work and it's essentially a small WiFi device that connects to a specified Access point (in your case the super hub) and re-broadcasts the same network settings from it's own wireless card, forwarding any data to and from the original access point like a wireless bridge. the only down side is there is usually a slight decrease in bandwidth with this method, where as using multiple wireless access points, hard-wired in to a network via Ethernet all have their own dedicated connection providing maximum bandwidth. Hope that helps and isn't too technical

tytiger said:
Yes, any off the shelf Signal "Booster" device should work, I use one at work and it's essentially a small WiFi device that connects to a specified Access point (in your case the super hub) and re-broadcasts the same network settings from it's own wireless card, forwarding any data to and from the original access point like a wireless bridge. the only down side is there is usually a slight decrease in bandwidth with this method, where as using multiple wireless access points, hard-wired in to a network via Ethernet all have their own dedicated connection providing maximum bandwidth. Hope that helps and isn't too technical
Click to expand...
Click to collapse
I full understand, soon as i get some spare time i will try the settings on the hub etc, if no luvk with that then i will look towards on getting the wifi extender preferably the netgear with two sntennas on for £40, i did hear that that one is only 2.4ghz. Oh well fingers crossed somthing works.

skyla20 said:
I full understand, soon as i get some spare time i will try the settings on the hub etc, if no luvk with that then i will look towards on getting the wifi extender preferably the netgear with two sntennas on for £40, i did hear that that one is only 2.4ghz. Oh well fingers crossed somthing works.
Click to expand...
Click to collapse
If im not mistaken again (the VM Superhub in my experience is the one at the office) it broadcasts on 2.5 and 5GHz simultaneously, so you may get away with it, the repeater would use the 2.4Ghz band for it's distribution link, and any devices close enough (and supporting) could use the 5GHz band, which in theory would work in your favour, and not effect the repeated signal, giving you a little boost in performance.. this, of course depends on how well the superhub manages its wireless, and i have little faith in it as it is..

Wifi issue related to root?

Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.

Dbrock1980 said:
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Click to expand...
Click to collapse
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out

BadKarma81 said:
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
Click to expand...
Click to collapse
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .

jpk17 said:
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
Click to expand...
Click to collapse
well i used odin and got back but it turns out it seems to be the router? im on stock with no root and still cant access the net or anything else when im connected to the router. any thoughts on this?

Can you reset the settings in the router via your pc?

Try connecting standing right next to the router. I had this issue with my Note 2 and it ended up being a physical issue with the wireless chip or antennas. It's actually the reason I'm not on a S5.

Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app

Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.

Dbrock1980 said:
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Click to expand...
Click to collapse
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.

armeN0317 said:
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
Click to expand...
Click to collapse
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.

Broadley1 said:
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
This leads me to think that perhaps the router (however old or new) may have a setting, or an actual limit, on how many devices connect to it.
If not that, perhaps if you rooted, and tried removing bloat, you may have been a bit overzealous and removed something related to WiFi and are now having this issue as a result.
I have only removed the list of apps and bloat that have been posted on Ricks Rom HERE. The ONLY problem I have seen since removing this list, was that I can no longer access PhotoVault correctly. Gives me an error saying that it has no connection to the database, but my 4G is working fine at the time as I was downloading via steam and streaming a movie, and playing a PC game at the same time...

Dbrock1980 said:
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Click to expand...
Click to collapse
You have the right setup with a different subnet. It's possible the main router is assigning the same IP address that your router has to another device. It would be best if you picked up another router that has repeater capabilities and set it up in repeater mode. Also reserve an IP address for your router from the main router to avoid IP conflicts.
Another possibility is simply the wifi on your router is deteriorating and it's time for a replacement. I recommend the Netgear Nighthawk R7000 if you don't mind spending the $$$. If your on a bit of a budget the Netgear N900 (WNDR4500v2) is the next best thing that supports repeater mode.

well its been still working intermediary. I have to unplug the router and plug it back in then i can browse the net on my phone. idk if id like to lay out that kind of money for a new router. there has to be something else thats causing it. i set the router to reboot everyday, also my phone. its odd though. sometimes it works sometimes it dosent.