Ok I have search a good bit online surfing the net, and 3 calls to Belkin 3 calls to T-mobile and nothing. Now my wifi works everywhere else, and my labtops connect just fine to the router but it seems like the Belkin N has something blocking it (even tried a shadow with original ROM and would not connect). So I took all the security opitions off along with the firewall and it still failed to connect. If anyone has any solutions or ideas I am willing to try. Thanks guys
(SOLVED WITH US FIRMWARE)
is routerset to b/g/n ?
has router got mac security set-up?
nolovelust said:
is routerset to b/g/n ?
has router got mac security set-up?
Click to expand...
Click to collapse
It is set for B/G/and N. And i dont know about the mac security set-up. But I have tried setting it to just G or B and N and nothing. Tell me more about this mac security set-up.
There is nothing wrong with your phone. The shadow/juno has an internal wireless card that only supports b/g wifi and it's currently not compatible with n radio signals. It will work perfectly with b/g wireless networks. So, if your router has a b/g/n setting, set it to that, but do not set the security settings into a newer format, stick with wep2 or wep and it should work with no problem. If you leave it on n setting only, the internal wireless card in the shadow will not support it. You also have to remember that n wireless is not that widely used and its barely catching on. Many new electronics are still being made with b/g internal wireless cards because they are widely avaliable and come in smaller sizes suitable for phones like the shadow. Currently n wireless cards are fairly expensive and i doubt it will be made avaliable on phones anytime soon as cost would be too high for manufacturing. Hope this helps.
-AC- said:
There is nothing wrong with your phone. The shadow/juno has an internal wireless card that only supports b/g wifi and it's currently not compatible with n radio signals. It will work perfectly with b/g wireless networks. So, if your router has a b/g/n setting, set it to that, but do not set the security settings into a newer format, stick with wep2 or wep and it should work with no problem. If you leave it on n setting only, the internal wireless card in the shadow will not support it. You also have to remember that n wireless is not that widely used and its barely catching on. Many new electronics are still being made with b/g internal wireless cards because they are widely avaliable and come in smaller sizes suitable for phones like the shadow. Currently n wireless cards are fairly expensive and i doubt it will be made avaliable on phones anytime soon as cost would be too high for manufacturing. Hope this helps.
Click to expand...
Click to collapse
Ok I understand that but I have tried that already with all my security off set on just G/B and by them self's also and it still will not connect. I went threw all of this on the phone with T-mobile and Belkin. But I appreciate the help.
suasp0nte said:
Ok I understand that but I have tried that already with all my security off set on just G/B and by them self's also and it still will not connect. I went threw all of this on the phone with T-mobile and Belkin. But I appreciate the help.
Click to expand...
Click to collapse
i have the same problem
d*mn!
has anyone sort this thing out yet?
i have the same issue using stock TMO's ROM...
Just for the sake of discussion, I'm assuming that all of you have T-Mobile Shadow phones that work fine with other wireless routers or public access points? Any problems when turning on security settings on other wireless networks (those that you or your friend can manage)?
If the problems persist with other wireless networks while using your Shadow, chances are that your Shadow's wireless card is faulty, which is not unheard of.
Please comment on your phone's status.
Also, which model of Belkin N router are you all having problems with?
All N routers are typically backward compatible so setting them to mixed mode (B/G/N) would not affect the Shadow's Wifi capabilities.
AC, there's never a wep2...I guess you meant WPA & WPA2.
scenarios
First scenario:
Home
NETGEAR 802.11g/b WIRELESS ROUTER WITH WPA-PSK
RESULTS: fine.. shadow is working great on TMO's and erofich's rom
Second scenario:
GirlFriends HOUSE
NEXXT WIRELESS 802.11g/b WIRELESS ROUTER WITH WEP (cheap stuff)
RESULTS: Excellent, shadow is working fine on both roms
Third Scenario
MACDONALDS ROUTER
UNKOWN ROUTER WITHOUT SECURITY
RESULTS: FINE... Shadow gets connection.
----------------------------------------------------------
Last Scenario
OFFICE
Belkin N-Wireless Router F5D8233-4v3(01) with latest firmware update
Result: No way to get Shadow connected. Even WIthout Encryption, MAC address control off, B & G & N bands, UPNP Off, but my laptop does get WiFi Connection (just 11g compliant WiFi card)
Just to point out, I have the same problem with my Belkin Wireless N router. In the office, I can jump onto our Netgear Wireless N router without a problem. I also have no problem jumping onto any free McDonalds networks, the networks at friends' places, or the free network in the CambridgeSide Galleria out here near Boston. This is definitely not an isolated issue. Nobody with a Shadow can get on my home network.
Customer Call Details Nov 13 2008 04:37
I have an HTC Touch that can connect to other hotspots, but not to my home Belkin router. Sometimes, if there is another connection available, it can see the router, and says that it is Available, but cannot connect; other times it won't even see it. I have checked for firmware updates, but I have the latest. Any help would be greatly appreciated.
Belkin Response Nov 14 2008 22:18
Hi Lilburd,
Thank you for contacting Belkin Technical Support.
We understand that the HTC Touch does not connect to the router. We apologize for the inconvenience caused.
Please follow the steps given below to update the firmware and configure the router:
We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.
Please download the latest firmware on the router from the link given below. Download the file "3.01.29":
http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8233uk4&aid=10288&scid=0
and save it to the computer.
- To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
connected to the router with an ethernet cable.
Note: If you have changed your Router’s IP address, use that IP address.
- By default, the password is blank. Click the "Submit" button.
- Click on "Firmware Upgrade" under the option "Utilities".
- Click on “Browse” and select the bin file that you have downloaded.
- Click on “update” and follow the wizard.
- After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
- Reconfigure the router.
Please follow the steps given below for configuring the router:
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables.
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.
If the connection type is Dynamic (cable):
- Choose "Dynamic" and then click on "Next".
- Type in your “Host Name”, if your Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes".
If the connection type is PPPOE (DSL):
- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen.
Internet Status should show "Connected" on the top right hand corner of the web page.
If the problem persists, please get back to us with the following information:
1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).
3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”.
4. If the internet connection is stable on the computers using the router?
5. If the HTC Touch detects and connects to other networks in the neighborhood?
Lilburd, if you need further assistance please feel free to write back to us and we will be happy to assist you.
Regards,
Belkin Technical Support.
This was the response I got when I e-mailed Belkin, and it worked like a charm
You Solved This Issue
DUDE, Im using the F5D8133 4v3.. thatss the US version..
the latest firmware on the US support page was 3.01.17 if i remember right,
on the BELKIN UK Support page is 3.01.29 and guess what i updated the firmware to the one in UK site .... and....
IT DOES WORK LIKE A CHARM!
FINALLY I HAVE WIFI
bless you and the techsupport guy @ belkin uk
fenix_tx40 said:
DUDE, Im using the F5D8133 4v3.. thatss the US version..
the latest firmware on the US support page was 3.01.17 if i remember right,
on the BELKIN UK Support page is 3.01.29 and guess what i updated the firmware to the one in UK site .... and....
IT DOES WORK LIKE A CHARM!
FINALLY I HAVE WIFI
bless you and the techsupport guy @ belkin uk
Click to expand...
Click to collapse
The same happened to me. I also have a Belkin pre-n router and my HTC Tytn wouldn't get wifi, no matter how or what I tried. I read your comment yesterday and, although the no-so-great new firmware check utility on the web interface said there was no new firmware available, I checked the USA and UK sites, since the Spanish site doesn't even show this router anymore. I downloaded 3.01.29 from the USA site and now my HTC Tytn is getting wifi at last. Thanks a lot, you saved my day.
Related
Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!
Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...
Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!
Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...
hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX
tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.
still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!
problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.
kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....
I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.
Have you tried another WiFi access point to check the devices WiFi module actually functions?
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse
For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.
Same problem here in France with a Freebox as router
I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?
There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.
zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?
No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse
I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?
same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here
zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse
I also have this problem. Im in Denmark with a Zyxel P660HW-p1.
Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)
I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?
Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.
Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.
same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though
Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.
knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck
HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!
Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.
funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation
I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.
Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!
Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please
I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?
Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.
I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.
hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess
PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved
Hi All,
Just got my new HTC HD2 from Virgin, however I cannot for the life of me seem to connect it to my home WiFi (I've not tried it elsewhere yet).
I've still got my MDA Compact IV here with me and use the same settings as the HD2 and that connects first time no problems, but the HD2 isnt playing ball!
It sees my wireless network at home (full strength) and starts to connect then simply says "Available". No notification of incorrect wireless key etc...reported.
I have used my Compact IV side by side with the HD2 and no issues so I am puzzled as to what I need to do now
Any help would be appreciated.
Thank
Are you sure you didn't set up some MAC address filter in your wireless access point?
kilrah said:
Are you sure you didn't set up some MAC address filter in your wireless access point?
Click to expand...
Click to collapse
I've not enabled MAC address filtering on the router at all, just simple wifi security key access.
Flash a new radio?
(check my sig under hspl flashing guide)
if you are using wep, heres something to try.
routers can be set to three types of wep key
open
open or shared
shared
in my experience if you areset to the middle one, "open or shared" mobile devices can have trouble connecting.try setting it to just "shared"instead.
course it could just be my router but I have seen this behavior in three mobiles including my hd2.
Current router settings is WPA-PSK [TKIP]. I even tried turning off security and got nothing My router is Netgear WGR614v9 - it came with my Virgin broadband deal.
Current ROM version is 1.48.405.2 (71294) WWE and radio version 2.05.51.05.2
Its most annoying that the HD2 on the face of it seems like a really good handset but then I cant get the Wifi connected which most basic handsets have no issues with
Any other possible solutions?
I got the same problem
I have the exact same problem.. Cant connect to my AP with my leo... got no mac secure on, even if i remove my security(WPA/wep or whatever), it will not connect...
I had the same issue when I applied hint 39 from http://forum.xda-developers.com/showthread.php?t=583638
Result: couldn't connect to my network with WPA2.
After restoring the parameters everything is OK.
Right finally got it working!
Installed the Touch_X_Wireless_Draft_N_ON.cab cab and then uninstalled it and now it seems to work.
Cab can be found here: http://forum.xda-developers.com/showthread.php?t=584415
Hope that helps others out too
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
my advise is disabling WEP password in both HD2 and the router.
it works perfectly.
"Incorrect Network Key" problem
Bro you made my day! I spent whole day to figure out a solution to the exact problem. I wish I had seen your reply before. When I changed my cable modem's setting as suggested and encryption to AES, it worked
Thanks again.
spyralmale said:
I had this issue too, could see my home Wifi network, but the device would just say, "Incorrect Network Key". But it was correct!
I now have it working strangely by changing router Security Options to (WPA-PSK + WPA2-PSK)
Connects with no hesitation now!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=959764
"When you connect to wifi on your phone, open terminal emulator and do a ping to your PC's IP address, or use any ping app (I am using Net Ping from market). As soon as you start to ping your PC, connection is immidiatelly opened. I have no idea why it is like that, but for now I am using this method when I want to use FTP server on HD2...."
Hi
I've had a search in the forums but haven't seen any other posts re. this but wondered if anyone had any ideas?!
Basically I'm having problems connecting to some networks with my Tab 10.1 (stock, updated OTA to the latest TouchWiz UX last week).
I first had a problem last week when I took the device into work - there's an 802.1x EAP network there but it wouldn't even show up in the network list. My SGS2 connects to it without an issue.
Then when I got home tonight (after happily using it at my parents' house during the day) I found it wouldn't connect to my home WiFi (hidden SSID, WPA2). It had connected to this network fine in the past, but now was just sitting showing it as 'not in range' network. At first I thought it might be a router issue (it used to be a little flaky), but then I saw that my iPod and SGS2 were both connecting and working on it without a hitch.
I couldn't see the network at all in WiFi Analyzer (similarly to at work), although it was showing my neighbours' WiFi networks fine. I tried deleting the saved entry and telling the router to broadcast the SSID but it still wouldn't work.
I then put on my WiFi hotspot on my SGS2 (also a previously remembered connection) and it worked absolutely fine!
Does anyone have any ideas where to go next apart from doing a full reset? (which although not the end of the world would be quite a pain).
Thanks for any suggestions/tips!
OK, bit the bullet and restore my device to factory settings - it STILL can't see my home WiFi, despite my SGS2, laptop and iPod all connecting to it fine. It is however showing up two networks belonging to neighbours and also my SGS2 if I put it in WiFi hotspot mode!
Any suggestions folks??
Sounds like a route issue, did you reboot the router? Is the router on a channel below 12?
Hi thanks for the reply!
I actually just spotted a post at http://www.thegalaxytabforum.com/index.php?/topic/5511-my-wifi-no-longer-works/ with the same issue.
It looks like Samsung have mucked something up when they made the Touchwiz UX update - it now blocks WiFi channels 12 upwards, when the old stock Honeycomb firmware didn't do this. I'd moved my router onto 13 to reduce congestion and I guess the work one must be on 12/13 too.
I can see from the table at http://en.wikipedia.org/wiki/List_of_WLAN_channels that 12/13 are only allowed under low-power conditions in the USA, but this isn't the case elsewhere so they shouldn't have locked it down outside of the USA.
This also happend to me
pwhooftman said:
Sounds like a route issue, did you reboot the router? Is the router on a channel below 12?
Click to expand...
Click to collapse
As I had setup an additional router in my house (with assigned a high numbered -or so i thought- fixed IP address) for some reason my main router tryied unseccesfully to assign the same IP to my SGT as the router. This had obviously conflicts and could not log in.
Went into the router eliminated the fixed IP address and voilá! it got working again, all IP a dinamic!!
Regards