Related
hows the conection done? hopefully usb?
what setting / software are needed on the lappy and tytn?
if at all it can be done?
You can do it through USB, Bluetooth or IrDA.
These instructions are for universal, but the same applies for TyTN:
BlueTooth
IrDA
USB
maybe we should put this on the wiki?
yak86 said:
maybe we should put this on the wiki?
Click to expand...
Click to collapse
Wiki updated, I've put it on FAQs:
http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs
DUN
Is there a way to use DUN now that it's been disabled because of Internet Sharing?
New Tyten and Vista
Ok, I've been through the 3 ways to connec as a modem, I actually manged to connect ages ago with XP.
I now have a new Tyten, well new for the states but probably old in the rest of the world.
Anyway the New Tyten has a thing called Internet Sharing instead of wireless modem
None of the old settings are there anymore.
It also has a new way to connect via Blue Tooth Pan.
I've tried the Pan way but I had no luck, the connection seemed to work but I couldn't get on the internet.
I then tried USB, I couldn't get Vista to recognise the Tyten, even when I turned off the active synch, anybody got any ideas????
with Vista and WM6 internet sharing I think its easier than DUN. there is a whole how to in the help program on your hermesjust open the help app and search for internet sharing. just make sure your phone and laptop are connected via bluetooth and then open the internet sharing app and click connect make sure its set to bluetooth PAN. on my laptop I have a little bluetooth icon when its on so I right click that and then connect via persoanl network and then a little pop up pops up and I click on the connect bottun and it connects in about 15 seconds pretty easy! I know for USB you have to open the WMDC connection settings and uncheck allow usb connections.
Thanks
Cheers for that, I'll give it a go, although to be honest I've been trying it all afternoon..
I get the connection but no Internet connection..
Help Still needed
Ok, the plot thickens, I found drivers on the HTC Europe site to connect your Hermes to Vista.
I uninstalled all of the previous active synch hardware and also thre previous modem
When I plug the phone in it doesn't open the new downloads.
Any ideas, I'm running Windows 5.1, is there an official Windows 6 I can update to?
Some help with Macbook
So the instructions are great but how does it work on an Apple Macbook? I've searched through the forum many times without any luck. Any ideas on how to connect via USB and/or bluetooth?
elnino132 said:
So the instructions are great but how does it work on an Apple Macbook? I've searched through the forum many times without any luck. Any ideas on how to connect via USB and/or bluetooth?
Click to expand...
Click to collapse
Search, then you'll find.
It is ok for me using 10.4.10 with USB via MissingSync.
http://forum.xda-developers.com/showthread.php?t=302977&highlight=MissingSync
this may help...
For anyone having trouble getting their laptop to recognize the 8525 as a modem this may be the solution.
http://www.terranettech.net/DisplayPg.aspx?codeid=1128
my phone was working fine but when I tried to set my wife's up to tether it wouldn't show new hardware found when plugged in and when I tried to manually install the driver the process bix just kinda stalled out and wouldn't go forward with the driver even though I had browsed to the right one. I had to uninstall the driver which was viewing the phone as a serial device. if you're having this trouble then try following te directions in the link above. it worked for me...
i dunt know if there was a thread similar to this but anyway can anyone tell me whether u can do this or is there a program that will do this for me?
you want to give your PDA internet from your PC via USB?
Sounds kind of pointless to me, if your at your pc wouldn't you wanna just browse on that.
well the reason is...
well i want to update my antivirus database and i can't do that unless i have an internet connection on my BA( i'm using Kapersky antivirus) i don't think kapersky has definitions that are downloadable off their website so that u can transfer them from pc to ppc?
if you have active sync on then afaik you should be able to browse through it anyway, thats why you see the network icon flash up whilst it gives your phone a virtual network connection to your computer.
however the chances of getting a virus on your phone are incredibly slim
since u put it htat way im no longer using the virus program anymore
manachinmaniac said:
since u put it htat way im no longer using the virus program anymore
Click to expand...
Click to collapse
Quick, hack him whilst his anti-virus is down!
Oh no!!
oh no, ps have mercy. it is inevitable. oh pls. don't.hahaha
I'm not 100% sure, but I use My Mobiler and I believe there may be an option to connect to an IP address through that connection. It's also a really good program and free
Link?
u gotta link coz i would really give it a try.
OK....
Guys....i need to know HOW EXACTLY to configure my Universal (WM6) to do so...
i mean i have been searching and trying and NO CANT DO IT....pleaaaaaaaaaaase i need it...i just wanna know how to connect to internet using the PC,,,,
I was looking for the same: For me this worked: In active sync at your pc go to File-->connection setting. Change "This computer is connected to" to The Internet not automatic as default. Thats it. Worked for me. Diden't work on auto mode. Hope this helps
Ben
Ive been using Activesync via bluetooth for years too.
yes... got it...
1. change the setting like what says above.. in WMC , connection setting, change the computer connect to [ drop menu ] the internet.
2. make sure advance pc to usb is enable in ppc..
Hey, perhaps I am blind, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via LAN, Bluetooth, best would be over Active Sync - USB
Does anyone know there something helpful?
Thanks a lot
My Mobiler
Please have a look under www.mymobiler.com
Thanks! This Software is great!!! Better then I expected!
this is pretty coool! ashame the lag when textin from the laptop
you may wanna check this out
http://soti.net/
remote control via internet
hi guys,
perhaps I am blind too, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via internet. I search a software like VNC but working in reverse!!! So, i need to run a program installed on my diamond while the phone is several miles far from me
Does anyone know there something helpful?
Thanks a lot
P.S. sorry for my english....
Use VNC server (pocketvnc) instead of client.
vnc connection problem
hi HwangPL,
thank you very much for your replay. After your post i've downloaded pocketVNC server version 1.4.2.0(demo version), but i'm not be able to use it. The vnc client on my pc says "connection failure". I think I'll go crazy before sunday......
If you or anybody else have a solution please post it!!!!!!!!!
Thank you one more time.
Try to use old VNC Viewer on your PC. I cannot connect when my mobile phone uses GPRS connection, but it works with WIFI.
I cannot test it right now, cause I don't have any WIFI connection (it surely worked some time ago).
I'll try to test it tomorrow maybe
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
OK. I used vncserver v.1.4.5.0 demo, on my pc VNC Viewer Enterprise E4.5.1 via WIFI (on mobile as internet connection) and it worked. Goodluck!
hi, i came back!!!
Finally i've found the solution. The problem is the IP address. My operator doesn't give me a public IP but a NAT address. This is a very big problem because the phone can't accept any type of connection by the web. Fortunately i found a beutiful program called "Hamachi" that works on both the computer and the PocketPC. So i resolved my problems.
Thanks very much to all for suggestions.....
Hey there,
I am having i think a small problem with both SOTi and My mobiler.
I Have a Touch diamond and when i am seeing the camera on the PC all goes black in PC preview, but on device i can see the camera images.
Can anyone help.
Brgds
Hi
Strange nobody else having same problem.
I believe the reason with the no preview its due to the autofocus, can anyone check on this.
Tks in advance
Jeyo Mobile Companion 2.1
Hey everybody!
Lately i have been trying to get internet through my USB connection without installing anything on the computer. I have searched but didnt find much or atleast anything i could understand)!
I do have an app called internet sharing i tried using that but it doesnt let me connect to INTERNET but only to "Orange Internet" which incurrs data charges(sorta defeats the purpose)! Is it supposed to only do that?
So basicly is it possible to connect to regular internet (as if i was connected through wifi) on my wizard without installing anything on the computer??
Thank you very much A.Mishra
O, glad I can help you out with this one, I have a i600 and I wanted to do the same thing, I found some program called WMWifiRouter, you can download a trial version on their official site :
Code:
http://www.wmwifirouter.com/
I hope this was the answer that you wanted .
Grtz. Firestrikers
Just read this in the manual .....
"When your MDA Compact IV is connected via ActiveSync and your PC is connected tothe Internet, you can browse the Internet, retrieve Outlook emails and also use or update some of the applications that require an Internet connection - and all of it straight from your phone (e.g. you can update Weather or QuickGPS, or use Google Maps)"
Anyone know how I do this - have been trying to figure it out ... but in vain
Just worked it out ....
so... ??
I mean, this is a forum.
I'm sure, there are hundreds of geeks out there, who havn't figured out.
SHARE YOUR KNOWLEDGE !!
Explain, what you did, what happened, how you solved..
cheers
vijaydesor said:
Just worked it out ....
Click to expand...
Click to collapse
share pls coz i aint solved this one yet
damn, i cant even change my softkeys still..
same in here pls someone help me, i tried but i couldn't did it...
Hi guys,
first off - sorry I didn't post my solution earlier - and thanks to jackwidu for pointing out the error of my ways
I connect to my pc using Activesync Version 4.5.0. When connected through activesync, I was unable to (and also unaware that I could) connect my diamond to the pc's internet connection. I recent read that this was possible in the user manual and at first despite trying all different settings, still failed to do so.
Eventually, as in many microsoft cases, I uninstalled activesync and reinstalled and hey presto, was able to access the internet through my pc
Not sure if this will work for everyone but interested to find out if it does ....
good luck guys