Database Users

Stuck at G1 Splash (Help Please)

As a disclaimer, I have already searched and found some people with the same issue. What I haven't found is someone that arrived at this problem in the same way I did. I am scared ****less of bricking my phone (and hope I haven't already). So at this point, I am looking for some help to figure out my best course of action.
I recently updated to JF1.5 using his updater app, and everything worked. Today when I received my new SDcard, I started the process to get apps on my SD following this tutorial: http://forum.xda-developers.com/showthread.php?t=512743
I got as far as partitioning my card using the Apps2SD application as described, doing everything the tutorial says. I began the partition on my phone, and let it sit.....and sit, and sit. It sat frozen on the partitioning screen (the one with the slider to select the size) for almost an hour before i pulled the battery. I selected 1444mb for the ext2 after reading that it was not a good idea to go higher than 1500mb.
Now, as stated the phone boots to the G1 splash and goes nowhere. I am however still able to boot in recovery mode using Home+Power. Interestingly, it says at the top:
"Android system recovery utility
Build: JFv1.42"
Not sure if this means that 1.5 didn't install correctly or what, but that's what it says.
I have no idea what to do at this point, and am scared to go on without some candid advice. Sorry for the noobishness of my description - if there is anything else needed to give accurate advice please let me know. Also thanks in advance for any help I can get!

Same thing happened to me, you have to reflash. I tried using that method and it never worked for me, although I already had the partition. So reflash jf 1.51 and you are golden. BTW that text you see in recovery is the recovery image version, until you switch to another it will say that.

meoshe said:
Same thing happened to me, you have to reflash. I tried using that method and it never worked for me, although I already had the partition. So reflash jf 1.51 and you are golden. BTW that text you see in recovery is the recovery image version, until you switch to another it will say that.
Click to expand...
Click to collapse
Thanks for the response. I'll have to find a way to get that image onto my SD card. I just bought a 16BG card and that was the card I was using when I ran into this problem.....oh wait a sec....
I'm assuming that the JF1.51 update.zip will still be on my old 1GB card from when I updated to JF1.51 via his updater app last week? If so then my life will be a lot easier, and I'll just swap back to that card, boot up in Recovery, flash from update.zip, and that should be it?
Just want to make sure before I put that old card back in and try to flash....

try wiping before you update? Also to mount your SDcard (if you need to) press alt-x in recovery (or in adb shell) and type
Code:
echo /dev/blockl/mmdblk0 > /sys/devices/platform/usb_mass_storage/lun0/file

x2 that's what i had to do since my computer stopped reading sd cards.

Wipe then update.
I'd also recommend using CMv3.4 because the apps2sd is automated. It runs a2sd by itself
And with Cyanogen Recovery v1.2 you can move apps to sd card

First off, just want to thank everyone for the help. I successfully reflashed with jf1.51, but now I can't seem to sign in. I'm on the welcome screen, skipped the tutorial, entered my Gmail account and it sits for awhile trying to contact the server and then says there's a problem with the service or my sim card.
I know my sim card is provisioned for data, so not sure what's happening here...any ideas?
EDIT: Forgot I had to enter the Rogers APN settings, trying that now (Duhhh)
Abolfazl said:
Wipe then update.
I'd also recommend using CMv3.4 because the apps2sd is automated. It runs a2sd by itself
And with Cyanogen Recovery v1.2 you can move apps to sd card
Click to expand...
Click to collapse
I'm interested in this Cyanogen stuff, but no idea where to start. Any good tutorials? I was following this scene for awhile but kinda lost touch a few months ago - turns out there's been lots of developments.

t3mp3st said:
First off, just want to thank everyone for the help. I successfully reflashed with jf1.51, but now I can't seem to sign in. I'm on the welcome screen, skipped the tutorial, entered my Gmail account and it sits for awhile trying to contact the server and then says there's a problem with the service or my sim card.
I know my sim card is provisioned for data, so not sure what's happening here...any ideas?
EDIT: Forgot I had to enter the Rogers APN settings, trying that now (Duhhh)
I'm interested in this Cyanogen stuff, but no idea where to start. Any good tutorials? I was following this scene for awhile but kinda lost touch a few months ago - turns out there's been lots of developments.
Click to expand...
Click to collapse
It is pretty cut and dry. Cyanogen's Mod unleashes the G1 to its max. Apps2sd is automated and is working before you can even turn your phone on.
CMv3.4
CM Recovery v1.2

Abolfazl said:
It is pretty cut and dry. Cyanogen's Mod unleashes the G1 to its max. Apps2sd is automated and is working before you can even turn your phone on.
CMv3.4
CM Recovery v1.2
Click to expand...
Click to collapse
Cool, I guess I'll try it out now before trying to restore everything. I don't see a tutorial for it though, or am I to just follow the previous "How to root" tutorial and just use his image as the update.zip?

t3mp3st said:
Cool, I guess I'll try it out now before trying to restore everything. I don't see a tutorial for it though, or am I to just follow the previous "How to root" tutorial and just use his image as the update.zip?
Click to expand...
Click to collapse
no no no! just rename CM3.4 to update.zip, enter recovery (Home+power) wipe (alt+w) and flash (alt+s) after it says installation successful, reboot (Home+back)
you might also want to download his recovery image 1.2 like suggested in the posts above me
place the recovery image on your sdcard, do not rename it and do
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img

alritewhadeva said:
no no no! just rename CM3.4 to update.zip, enter recovery (Home+power) wipe (alt+w) and flash (alt+s) after it says installation successful, reboot (Home+back)
you might also want to download his recovery image 1.2 like suggested in the posts above me
place the recovery image on your sdcard, do not rename it and do
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
Click to expand...
Click to collapse
Thanks a lot, going to try that now with my 16GB card. And just to be clear (last questions in this thread, I PROMISE!), I should flash with CM3.4 and THEN install the recovery image, or vice versa?
Also, with CM3.4, will I have to go through to steps again to try to partition my card (which is where i ran into the problem from post #1), or is there some automatic process built into his super-de-duper ROM?
Thanks again to all for the speedy responses!!

t3mp3st said:
Thanks a lot, going to try that now with my 16GB card. And just to be clear (last questions in this thread, I PROMISE!), I should flash with CM3.4 and THEN install the recovery image, or vice versa?
Also, with CM3.4, will I have to go through to steps again to try to partition my card (which is where i ran into the problem from post #1), or is there some automatic process built into his super-de-duper ROM?
Thanks again to all for the speedy responses!!
Click to expand...
Click to collapse
Don't worry asking questions is good as long as they are intelligent. You should flash CM3.4 and then the recovery image, as that is what i did. However, i don't think it really matters. To be safe, flash CM3.4 and then the recovery image.
And to your question pertaining to partitioning your SDcard, you can try MarcusMaximus' Apps2SD2 app which formats the card for you here
Unzip it to your sdcard and install it using ASTRO file manager or some other file manager.
If you have adb working,
Code:
adb install AppstoSD2.apk
if you have other questions you can always contact me on AIM- roflzbrianxdd

alritewhadeva said:
Don't worry asking questions is good as long as they are intelligent. You should flash CM3.4 and then the recovery image, as that is what i did. However, i don't think it really matters. To be safe, flash CM3.4 and then the recovery image.
And to your question pertaining to partitioning your SDcard, you can try MarcusMaximus' Apps2SD2 app which formats the card for you here
Unzip it to your sdcard and install it using ASTRO file manager or some other file manager.
If you have adb working,
Code:
adb install AppstoSD2.apk
if you have other questions you can always contact me on AIM- roflzbrianxdd
Click to expand...
Click to collapse
Thanks a ton, I'll get to this right after i finish this delicious sub! I'll also add you so I can IM if i have any more questions..

t3mp3st said:
Thanks a ton, I'll get to this right after i finish this delicious sub! I'll also add you so I can IM if i have any more questions..
Click to expand...
Click to collapse
Cool, Best of Luck with the flashing

alritewhadeva said:
no no no! just rename CM3.4 to update.zip, enter recovery (Home+power) wipe (alt+w) and flash (alt+s) after it says installation successful, reboot (Home+back)
you might also want to download his recovery image 1.2 like suggested in the posts above me
place the recovery image on your sdcard, do not rename it and do
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
Click to expand...
Click to collapse
Alright...I successfully partitioned my card, flashed with CM 3.4, but now when I try this instruction to install the new recovery, i get this error msg in Terminal:
error writing recovery: Permission denied
Any ideas?

You have to enter su before the code..
Code:
su
then
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img

meoshe said:
You have to enter su before the code..
Code:
su
then
Code:
flash_image recovery /sdcard/cm-recovery-1.2.img
Click to expand...
Click to collapse
I did not enter the su, I will try that now thanks. In the mean time I also performed this step:
13. My /system/sd is read only and/or didn't upgrade to ext3!
Your filesystem is probably corrupt. Boot into recovery and open a console. Run "mount /system" then "/system/bin/e2fsck /dev/block/mmcblk0p2" and fix your filesystem. Reboot.
from: http://forum.xda-developers.com/showthread.php?t=518851
So I hope that didn't hurt anything...ill try with the su now. Thanks!
edit: out of curiosity, what does the "su" stand for? I feel if I know this it may help me to remember to enter it before any commands.
edit #2: does it stand for "Super User" to allow super user permissions? I gathered this after entering SU prompted me to allow superuser access

New recovery.img successfully installed! Thanks again to everyone that helped me with this.
I know I can transfer apps to SD easily from recovery now, but is there also a similar way to do it from the phone (or do they install to the SDcard by default now?)

Hey T3MP3ST... how did it go with upgrade to cm3.4
I had the same problem as you mentioned start of the post....
(stuck at g1, after partition).
this cm3.4 sounds like the solution for me to have apps2sd..
as it is in the ROM automatically, if i understood correctly.

dynamisoz said:
Hey T3MP3ST... how did it go with upgrade to cm3.4
I had the same problem as you mentioned start of the post....
(stuck at g1, after partition).
this cm3.4 sounds like the solution for me to have apps2sd..
as it is in the ROM automatically, if i understood correctly.
Click to expand...
Click to collapse
Hey there, with the help from everyone in this thread, along with the partitioning instructions using Ubuntu (if you still need to partition your card) from tubaking182 found here: http://forum.xda-developers.com/showthread.php?t=523648, It was great.
I just finished flashing with that ROM and then installing CM's recovery image (which is AWESOME...trackball selection, Apps2SD in one click)
I HIGHLY recommend it. If you have any problems, I'm sure you'll find most of the answers in this thread. If not, try PMing one of the helpful respondents, or I may be of SOME help with some minor questions or assurances.

ClockworkMod Recovery

This update.zip will flash clockwork recovery, overwriting the need/ability to use the stock recovery folder with command in it.
For advanced users only.
v.8 Download: http://www.mediafire.com/?dvleg4oatkfxm7w
The credit for this all goes to Bekit for the biggest step forward on the Gtablet, and obviously Koush for the custom recovery to begin with. Roebeet packaged this update.zip.
Instructions:
1) Unpack download to root of sdcard. (Internals /sdcard, NOT /sdcard2)
2) Start tablet while holding volume + and power. (Let go when you see text come up saying entering recovery)
3) You will see a short installation and it will reboot.
4) Check the install by powering off, the powering on with volume+ and power
5) You should be greeted by a menu with Clockworkmod at the top

i have been using clockwork on my gtablet for several days now. it backs up and restores just like i would expect it too.

well done as usual.. props for all involved.

Works great no problems at all !!!
wishlist:
1. add SDCARD2 to the mount and storage section.
2. ... wait that is it.!

Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?

rushless said:
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
Click to expand...
Click to collapse
thats how i did it

rushless said:
Should I be able to take this file and rename to update.zip, put it in the root of "sdcard" internal space, put the recovery folder in root directory too and then boot up with power + volume up to install this?
Click to expand...
Click to collapse
Or just extract the zip file supplied in the first post onto the sd card. Everything will go into its place. Then boot from recovery using power and volume+.

So, if I place the cwm update.zip and recovery folder in the root of sdcard (internal), then when I boot into recovery, CWM will show up instead? Just want to know if it really is that simple. Also, if I want to flash a new ROM (Like the zpad one), do I simply place the update.zip from that rom anywhere other than the root of "sdcard", and flash using CWM?
One last question, if I delete the CWM update.zip, is it like CWM was never placed on my g tab?

Am I the only one having trouble getting cwrecovery on the root of sd card? cant get this to run. i am a visual learner and reading how to do all this is helping me very little. if anyone would be willing to do a video or reference me to a link so i can learn to do all this, i would appreciate greatly. this is very frustrating tab stock!

hey this might help you get it installed..
plug your gtablet into your computer, then on the gtablet, click the "enable usb storage connection" button
then on your pc, open windows explorer, and open removeable drive F, the letter may be different for you.. it should show 13gb free on it, and there should be an android folder and a dcim folder.. that's the root of the storage inside the tablet.. it's the same as sdcard.. unzip the clockworkblahblah.zip to the root/top level directory of that removeable drive. then turn the tablet off. and then hold down the volume + button while powering it back on, it should install the clockworkmod recovery manager.. that's about it

jw52637 don't feel bad... I'm a visual learner as well.
uncola,
I followed your instructions and I saw the update install on boot up. Now I'm lost. I expected to see and application named ClockworkMod Recovery or something like that... but I did not. How do I know it is installed and how do I use it to back up my stock ROM? Also, do I remove the "update.zip" from the root directory or just leave it there?
Sorry for the questions but I want to learn how to do this so I can stop bothering you guys.

mmracing said:
jw52637 don't feel bad... I'm a visual learner as well.
uncola,
I followed your instructions and I saw the update install on boot up. Now I'm lost. I expected to see and application named ClockworkMod Recovery or something like that... but I did not. How do I know it is installed and how do I use it to back up my stock ROM? Also, do I remove the "update.zip" from the root directory or just leave it there?
Sorry for the questions but I want to learn how to do this so I can stop bothering you guys.
Click to expand...
Click to collapse
ClockWorkMod Recovery is the recovery system...so you have to boot your tab into recovery (hold volume + and power the tab up). If installed, you'll get the ClockWorkMod Recovery instead of the stock recovery system. You can make backups, do restores, install .zips, etc... from there.....then "reboot" the system to boot back to your normal system.

Thanks tcrews. I moved the update.zip from the root directory to a saved directory then rebooted holding the volume + key and it booted into ClockWorkMod Recovery. I chose back up and everything seemed to backup fine.
So if/when I install another ROM and I do a restore to the ROM I just backed up I should be right back to where I was at that time. I have used Titanium Backup to back up all my applications and settings and know I would have to restore them also.
I'm just wanting to understand how I can get back to "stock" so that I can get the automatic updates from Viewsonic.

Well i just tried it all again, and all worked very well. Thank you very much

Ok, I'm totaly new to this so please bare with me, having some troubles with my G tablet NOT booting so I cant access it through Windows to install CW to fix my tablet. How can I get the Files on the tablet? I can get it to attempt recovery but no luck. PLEASE help. I'm pulling my hair out here.

Anyone know how or am I sol and should try and sent it back?

maccaw1 said:
Anyone know how or am I sol and should try and sent it back?
Click to expand...
Click to collapse
There is a physical reset button inside the device, or you can try ADB.

I cant get the recovery image to find update.zip
I have clockwork recovery gtab-cwm-v08 installed and renamed to update.zip in the root of the internal sd but when i boot into recovery it goes to the android screen then shows a triangle with a exclamation point, then reboots normally!
I rooted with z4root 1.2.1
I have superuser permission so am rooted!
Unrooted then rooted again figuring this might help!
Tried a few different clockwork recoveries
have no idea what the problem is! if anyone has any clue it would be appreciated!

drumdumb said:
I cant get the recovery image to find update.zip
I have clockwork recovery gtab-cwm-v08 installed and renamed to update.zip in the root of the internal sd but when i boot into recovery it goes to the android screen then shows a triangle with a exclamation point, then reboots normally!
I rooted with z4root 1.2.1
I have superuser permission so am rooted!
Unrooted then rooted again figuring this might help!
Tried a few different clockwork recoveries
have no idea what the problem is! if anyone has any clue it would be appreciated!
Click to expand...
Click to collapse
Had that happen to me. What I did was run the CWM again into the gtab. Next reboot I had CWM insgtalled and working.
Hope that helps

CWM 0.8 is the one that I used and is working for me. I have the gTab w/the "original" partition scheme, and installed it by the original gTab update process.
If you're using newer CWMs I've read posts in the CM6b4 thread that newer CWM version seem to be causing problems for some people.
Also if you have a "newer" "batch" gTab w/a different partition map scheme you might want to check what the latest info is on the IRC channel, #tegratab on freenode IIRC. Might be quickest to ask for help there anyways, as it sounds like this probably isn't your problem.

Fresh Start

So i had to Odin back to stock because in whatever rom i used i wouldnt get vibration for text messages. This worked fine and i flashed back to eugenes stock jk2 that was prerooted. Now i need to install new roms again and im having trouble. I have rom manager installed and superuser was already there. I got the rom on the sd card (tried with multiple roms), but when i go to flash the roms it fails because it can't verify the signature. Even when i go to fix permissions and reboot my phone like rommanager tells me to it cant flash a new rom. On the other roms i had i would just go to advanced options in recovery and disable verification checks but with the stock recovery i cant do this. So my main question is why isnt this option in cwm recovery and how can i get it there so i can start getting roms again. Thanks for anyone who takes the time to read this...

Make sure that you have CWM recovery flashed onto your phone using odin. Also make sure that whatever rom you install is on agreement with your software version.
Sent from my overclocked Fascinate using XDA App

yea maybe i need to try one of eugenes roms because its his froyo version? i have cwm because i installed it through rom manager (well at least i think i have it)

lavcoles said:
So i had to Odin back to stock because in whatever rom i used i wouldnt get vibration for text messages. This worked fine and i flashed back to eugenes stock jk2 that was prerooted. Now i need to install new roms again and im having trouble. I have rom manager installed and superuser was already there. I got the rom on the sd card (tried with multiple roms), but when i go to flash the roms it fails because it can't verify the signature. Even when i go to fix permissions and reboot my phone like rommanager tells me to it cant flash a new rom. On the other roms i had i would just go to advanced options in recovery and disable verification checks but with the stock recovery i cant do this. So my main question is why isnt this option in cwm recovery and how can i get it there so i can start getting roms again. Thanks for anyone who takes the time to read this...
Click to expand...
Click to collapse
Are you putting the rom on the internal memory?

Yea i copied it to the iternal sd, i see it on the internal sd, but the only way to reflash it is to rename it update.zip becauae all i can do is reinstall system packages

You have to download cwmrecovery, plug your phone in while in download mode and put cwmrecovery onto your phone. Just installing rom manager doesn't cut it and trying to flash anything will give the exact errors you're talking about.
Sent from my SCH-I500 using XDA App

how do you delete the post ?

So i put the cwm recovery in the phone slot in odin and reflash it?

lavcoles said:
Yea i copied it to the iternal sd, i see it on the internal sd, but the only way to reflash it is to rename it update.zip becauae all i can do is reinstall system packages
Click to expand...
Click to collapse
You put the rom Just on the internal sd card not any folders right?

its doesent matter at least for me if the rom is right there or in a folder no difference just file called update.zip need to be there (not in the folder )

and no ! u cant flash clockwork recovry thru odin ! loL both of these program u mentioned are intended to flash roms not to be flashed as rom p u can flash in clockwork recovery if the rome is made for it which would be packed with .zip file if its odin file it would be .tar not every rom is flashable thru odin or clockwork depends how devs made it

bartek25 said:
its doesent matter at least for me if the rom is right there or in a folder no difference just file called update.zip need to be there (not in the folder )
Click to expand...
Click to collapse
Something must have gotten corrupted in the file transfer. I know your fustrated . Have you tried repeating the odin process?

Yea it was on the internal sd, i mean iv probably flashed 20 different roms and i know how to move them between different file folders and how to access them ect... The only problem is basically that im stuck in stock which has a different recovery

nomadrider123 said:
Something must have gotten corrupted in the file transfer. I know your fustrated . Have you tried repeating the odin process?
Click to expand...
Click to collapse
No this sounds like a good idea though, maybe i should use a different tar file.

lavcoles said:
Yea it was on the internal sd, i mean iv probably flashed 20 different roms and i know how to move them between different file folders and how to access them ect... The only problem is basically that im stuck in stock which has a different recovery
Click to expand...
Click to collapse
Here is the update.zip that will flash you into clockwork from stock recovery. Put this on your phone's internal sd, reboot to recovery, and hit "reinstall packages". If your phone reboots to stock recovery again, hit reinstall packages again and the second time it should put you right into Clockwork Recovery. Good Luck.

Thank you this is what iv been looking for

NP Friend, let me know if it works for you.

Br1cK'd said:
NP Friend, let me know if it works for you.
Click to expand...
Click to collapse
wow it still says i cant flash the .zip file for some reason, it gives me the same error message about signature verification. I am rooted and i even rerooted but it didnt make a difference, thanks for trying to help though

lavcoles said:
wow it still says i cant flash the .zip file for some reason, it gives me the same error message about signature verification. I am rooted and i even rerooted but it didnt make a difference, thanks for trying to help though
Click to expand...
Click to collapse
What rom are you currently running, still on Eugene's JK2? If you Odin'd a stock file, you may have 2e recovery, not the modded 3e. Check this thread, it may help you out with the stock recovery issue. In fact untermensch mentions this kind of issue specifically in the OP. http://forum.xda-developers.com/showthread.php?t=833423

Br1cK'd said:
Here is the update.zip that will flash you into clockwork from stock recovery. Put this on your phone's internal sd, reboot to recovery, and hit "reinstall packages". If your phone reboots to stock recovery again, hit reinstall packages again and the second time it should put you right into Clockwork Recovery. Good Luck.
Click to expand...
Click to collapse
I just added this to the ACS, thanks for reminding me

A little help.. I400

aSo heres my issue. I installed Rom manager and when I try to apply update.zip it says its not found. So I found a update.zip that was supposed to be for the continuum put it in the root of the SD card then reboot in recovery mode. It applied the update.zip but now when I try to reboot into recovery mode I get stuck there. I have to take the battery out over and over. Any ideas? I cant flash any other roms or do any backups because I get stuck at the recovery screen..

What kernel do you have installed?
Sent from my SCH-I400 using XDA Premium App

Stock kernel.. Everything is stock.

What update.zip did you download?
Sent from my SCH-I400 using XDA App

^ that... did you use the one from the post on this forum?
Also, is your recovery stock also? Because that would be why........
Sent from my SCH-I400 using XDA Premium App

The recovery I was using is Clockworkmod, and the update.zip file that I used was from a website I cant remember right off the top of my head but it said it was specifically for the I400 Continuum. I was unaware that there was an update.zip in this forum. As of today I've uninstalled Clockworkmod and deleted update.zip from my SD card. As long as I dont go into recovery the phone shuts down and reboots just fine. But if i go into recovery it gets stuck there and I have to take the battery out a few times to get it to reboot.
P.S. you help with this is greatly appreciated as I am very new to the Android platform. I have a lot of experience modding and flashing roms in WM6 but none with Android.
Thanks,
Justin

what screen does it get stuck on? have you even flashed odin yet?

Lets make this easy.. Is there a post in this forum that gives all the files and step by step instructions on how to install the recovery and do the flashing?

YAY! I got it figured out. All is well! Thank you guys for your help. I think we can consider this case closed.
Thanks again,
Justin

Ok maybe not... I got through the recovery but now when I try to flash in CWM it aborts the installation and says this:
-- Installing: /sdcard/DL17_clean.zip
Finding update package
Opening update package
Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was depreciated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockWorkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
Any ideas?

Download the update.zip from the thread with the CWM kernel and replace the one on your SDCard. I'll get CWM 3.x out eventually then as well, as soon as I have some time to test it and get the few mods out there updated to edify.

Id love to but now its stuck at the 'samsung' screen. when I try to apply the backup that I just made it says:
ClockworkMod Recovery v3.0.0.8
Checking MD5 sums...
Erasing boot before restore...
Error while erasing boot image!
When I try to reboot it just gets stuck at the 'samsung' screen again.

Setup ADB on your computer and download the update.zip from the CWM thread in the Development forum. Open up command prompt and navigate to the directory where the update.zip is located. Boot into Recovery and plug your phone into your computer. Then run "adb push update.zip /sdcard/update.zip". After it finishes pushing, reapply the update.zip and you should be in CWM 2.5.x again. The reason you can't boot past the Samsung screen is because, based on your other thread, CWM 3.x that you tried to use wiped the kernel partition, so it has nothing to boot too. Until you get CWM 2.5.x back, you can't flash anything here via CWM without changing it over to edify scripting.

It says "device not found" Should I be in the stock recovery or CWM? Meaning should I apply update.zip on the phone or no?

You should be in CWM. If it's still not working, you'll need to get an ODIN package that has the kernel in it to flash. I'd post one, but I'm at work and can't put one together.

Yeah it still isnt working. Hey I appreciate all your help I understand you are working. Ill leave it alone for now but if (when you have time of course) you could put that together I'd be beyond grateful. If its as easy as flashing with odin and having the right CWM to flash the DL17 then I think I can handle that but if there are further, more complicated steps to correct this then I may need your assistance further.
Your help is greatly appreciated,
Justin

Continuum BRICKED
I was using Odin and Froyo to start the ROM and my phone bricked. I go to download mode and it went into CWM recovery. I followed instructions on the forums but now my phone goes from Downloading to Black REALLY FAST!
What do I do and how do I fix?
My phone wont read in Odin, it wont show brick screen, not showing CWM. wont charge. WHAT DO I DO?????????
I NEED MY PHONE!!
PLEASE HELP.

angryuserwhosephonehates. said:
I was using Odin and Froyo to start the ROM and my phone bricked. I go to download mode and it went into CWM recovery. I followed instructions on the forums but now my phone goes from Downloading to Black REALLY FAST!
What do I do and how do I fix?
My phone wont read in Odin, it wont show brick screen, not showing CWM. wont charge. WHAT DO I DO??????
Click to expand...
Click to collapse
Wait in Irc. Txwolf1980 is the resident fixer. But clarify what exactly you have done flashing wise. Read the sticky tread about bricked device. All of them.
And what's Brock screen?
Sent from my SCH-I400 using xda premium

angryuserwhosephonehates. said:
I was using Odin and Froyo to start the ROM and my phone bricked. I go to download mode and it went into CWM recovery. I followed instructions on the forums but now my phone goes from Downloading to Black REALLY FAST!
What do I do and how do I fix?
My phone wont read in Odin, it wont show brick screen, not showing CWM. wont charge. WHAT DO I DO?????????
I NEED MY PHONE!!
PLEASE HELP.
Click to expand...
Click to collapse
Ok. 1. What froyo file were you trying to flash?
2. At what point did it fail?
3. You say you outfit in DL mode, andvitvwent to CWM. On its own? I'm not sure that's possible. Please clarify
4. You say it now goes from download to black screen "really fast". Again, clarification.
5. Ifvyou have downloaded mode, and drivers, we can get a read in odin. It may take a few tries. When you say you don't have cwm, do you have stock recovery? When will you have an hour or so to get into IRC?

[HELP] Accidentally formated SDCARD!

So I rooted, then put CM10.1 nightly and gapps on my sdcard, then went to flash, and I spaced out and accidentally formatted SDCARD when i know that I shouldnt have. crap.
i tried using the "sideload" feature but it wouldnt work on my adb-mac version, i also tried adb pushing ROM files to SDCARD, it says transfered but when i go to flash it says no files in SDCARD, I also tried pushing to SDCARD/0 but i get an error that it isnt a directory since it is formatted.
SOME ONE PLEASE give me instructions on what to do. Do I have to go back to stock or can I just get this to go straight to CM10.1? Id prefer straight to CM10.1 obviously.

crackmulah said:
So I rooted, then put CM10.1 nightly and gapps on my sdcard, then went to flash, and I spaced out and accidentally formatted SDCARD when i know that I shouldnt have. crap.
i tried using the "sideload" feature but it wouldnt work on my adb-mac version, i also tried adb pushing ROM files to SDCARD, it says transfered but when i go to flash it says no files in SDCARD, I also tried pushing to SDCARD/0 but i get an error that it isnt a directory since it is formatted.
SOME ONE PLEASE give me instructions on what to do. Do I have to go back to stock or can I just get this to go straight to CM10.1? Id prefer straight to CM10.1 obviously.
Click to expand...
Click to collapse
Push cwm via fastboot then reflash the rom
Fastboot flash recovery (your recovery)
Sent from my Nexus 4

Hindsight 20/20, but it never hurts to do an adb backup, it will b/u your sdcard as well.
For the future: http://forum.xda-developers.com/showthread.php?t=1420351

mark manning said:
Push cwm via fastboot then reflash the rom
Fastboot flash recovery (your recovery)
Sent from my Nexus 4
Click to expand...
Click to collapse
did this, but still same error, no files found in sd card. i did not think this would solve it but i tried anyway...

crackmulah said:
did this, but still same error, no files found in sd card. i did not think this would solve it but i tried anyway...
Click to expand...
Click to collapse
So you've successfully flashed a recovery img via fasboot? Did you also push a copy of the ROM zip back to your phone?
Boot to recovery and then adb push the ROM to the sd card.
Code:
adb push yourROMsName.zip /sdcard/
The above code assumes you've placed the rom zip in the adb or platform-tools folder on your PC.

Can't you just boot into fastboot, flash a recovery, boot into said recovery and mount the internal storage and drag and drop the files from your computer?
How did you format the SD card when the phone doesn't have one?

jakejm79 said:
Can't you just boot into fastboot, flash a recovery, boot into said recovery and mount the internal storage and drag and drop the files from your computer?
How did you format the SD card when the phone doesn't have one?
Click to expand...
Click to collapse
The internal storage is considered an SD card.
Sent from my Nexus 4

CMNein said:
So you've successfully flashed a recovery img via fasboot? Did you also push a copy of the ROM zip back to your phone?
Boot to recovery and then adb push the ROM to the sd card.
Code:
adb push yourROMsName.zip /sdcard/
The above code assumes you've placed the rom zip in the adb or platform-tools folder on your PC.
Click to expand...
Click to collapse
yes i did repush the rom file. this isnt working because i dont believe that flashing a recovery adds folder/partition information to the sdcard. maybe im wrong, but it didnt work.

crackmulah said:
yes i did repush the rom file. this isnt working because i dont believe that flashing a recovery adds folder/partition information to the sdcard. maybe im wrong, but it didnt work.
Click to expand...
Click to collapse
Are there any spaces in the ROM zips name?

CMNein said:
Are there any spaces in the ROM zips name?
Click to expand...
Click to collapse
lol no
I am currently using Wug's Nexus Toolkit to try to flash stock from softbrick mode...will let you know how it goes
EDIT:: This is giving me some trouble as I cant turn on USB DEBUGGING (because i have no OS installed) to install the drivers and such.....
PLEASE KEEP IDEAS ROLLIN...

crackmulah said:
lol no
I am currently using Wug's Nexus Toolkit to try to flash stock from softbrick mode...will let you know how it goes
EDIT:: This is giving me some trouble as I cant turn on USB DEBUGGING (because i have no OS installed) to install the drivers and such.....
PLEASE KEEP IDEAS ROLLIN...
Click to expand...
Click to collapse
Just go back to stock
Sent from my Nexus 4

mark manning said:
Just go back to stock
Sent from my Nexus 4
Click to expand...
Click to collapse
this is what im trying to do lol...having trouble tho. what is your recommended method?

crackmulah said:
this is what im trying to do lol...having trouble tho. what is your recommended method?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2010312
Sent from my Nexus 4

You could also try wugfresh's toolkit and selecting "Back to Stock" -> "Soft-bricked".

mark manning said:
http://forum.xda-developers.com/showthread.php?t=2010312
Sent from my Nexus 4
Click to expand...
Click to collapse
ya im gonna do that if this Wug's Toolkit wont do the trick...seems to be working now tho...in middle of flashing stock

crackmulah said:
ya im gonna do that if this Wug's Toolkit wont do the trick...seems to be working now tho...in middle of flashing stock
Click to expand...
Click to collapse
You should learn how to do this without tool kits. Those things while helpful are nothing more than a crutch
Sent from my Nexus 4

mark manning said:
The internal storage is considered an SD card.
Sent from my Nexus 4
Click to expand...
Click to collapse
Yeah but doesn't the Nexus 4 lump all the internal storage together, I know other devices like the OXL have like 6GB internal storage and then a 'simulated' mSD card of about 10GB, making 16GB total. But the Nexus 4 uses the whole 16GB (or 8GB) as internal storage.

mark manning said:
You should learn how to do this without tool kits. Those things while helpful are nothing more than a crutch
Sent from my Nexus 4
Click to expand...
Click to collapse
yes definitely agreed.
although ive always wanted to try one, and it worked! if this were to happen again (if i dont shoot myself) then i will be doing it manually.
Thanks so much to everyone for all the help! I am now running Official CM10.1 Nightly (newest) and running beautifully so far. This is my second N4 tho, so I will be using my 1st stock one for today since its already setup, have to go to work now and will setup my new CM10.1 N4 later, hopefully wont find any crazy bugs...

I had the same problem and after reading this thread I tried the Fastboot method first:
after I finished it didnt boot so I continue with the inst', then it booted but only with 8GB, so I continue with the inst' and from that stage it just didnt boot.
At the end I tried the root toolkit V1.6.2 and the phone back to life with stock rom and 16GB.

I'm back to stock now. But I've used the sideload successfully. After you get your phone restored, you'll probably want to do a full factory reset because some of your pushes have probably gone through and are now eating up space. You can't delete them that I know of unless you FULLY format.
ANYWAY
When I got sideload to work, I had to push it to /sdcard/0/, /sdcard0/, or something like that. Wish I could be more specific, but I don't want to change from stock to install cwm (the ROMS have too many bugs so far, and we might be getting 4.2.2)
The key is finding the right directory to push it to. Experiment with slashes, and it SHOULD work.