I've recently installed Master Rom 1.1.4 JAC however I think I've made the mistake of flashing Vibrant_ AOSPish 1.2 & JAC & KING KERN the result is that I can not get past the launcher section of my phone or select anything because the UI is not responding. I've tried the 3 button thing to get to recovery and it's just not working for me after a million tries I gave up. At my wits end I came across one click root, (excellent to get to recovery mode)! now I'm stuck it won't let me get to SD section where my Rom are stored... I need Help? BTW I have a mac I know not good for this situation but what am I going to do.
Have you tried restoring to stock rom using odin?
Sent from my SGH-T959 using XDA App
No I have no Idea on how to use Odin what I've seen is that it can only be use if you have a PC, I have a mac with VM fusion but that does not work. I'm really close to just throwing the phone out the window -_-
You can't use someones computer? Don't throw the phone away, you can send it to me! Lol
Sent from my SGH-T959 using XDA App
Related
I want to preface this by saying I have spent 4 hours trying to recover my phone and I have tried all the things suggested in the treads, including what worked for me last time.
I installed a kernal for using the buttons backlighting for notifications which apparently works on the Fascinate. My phone never rebooted from that. I tried to install Clockwork and install an update.zip or an old restore file and it would not read off my SD properly/was not effective. I then tried using Odin to flash over the system, kernal, and recovery. Still no dice. I formatted my sd and tried to install clockwork again and everytime I try to access it through installing update.zip it says that signature verification failed and the installation is aborted and does not even reach clockwork.
I hope someone can help me. I have tried everything I can think of and have had zero luck.
PS: Currently my phone will show SAMSUNG but keep looping
Did you have voodoo on your phone before you flashed the kernel?
Sent from my SCH-I500 using XDA App
ktez said:
Did you have voodoo on your phone before you flashed the kernel?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
No, I was running a deoxed .4 rom
Are you installing clockwork through Odin? I have had problems with getting clockwork to work if I installed it any other way. It should work through Odin tho - also was the kernel you flashed with the backlight notification the voodoo one or non-voodoo?
Sent from my SCH-I500 using XDA App
Also did you try wiping data? Even if you can't get into clockwork you can do it from the Samsung recovery. I would try that and then do all the Odin recovery stuff again and see if that helps - but if you flashed the voodoo kernel you will have to go thru the post on completely removing voodoo.
Sent from my SCH-I500 using XDA App
ktez said:
Are you installing clockwork through Odin? I have had problems with getting clockwork to work if I installed it any other way. It should work through Odin tho - also was the kernel you flashed with the backlight notification the voodoo one or non-voodoo?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I am installing through Odin. I don't know any other way to do it. I installed the non-voodoo one.
I installed this one since I heard it worked on our phone as well...
forumDOTxda-developersDOTcom/showthreadDOTphp?t=772672
"i9000_BacklightNotification_v1.6.zip"
ktez said:
Also did you try wiping data? Even if you can't get into clockwork you can do it from the Samsung recovery. I would try that and then do all the Odin recovery stuff again and see if that helps - but if you flashed the voodoo kernel you will have to go thru the post on completely removing voodoo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I have wiped every data thing you can think of several times. And do you think it would hurt for me to try to remove voodoo even if I don't think I flashed that kernal
I'm hoping someone more experienced than me will take this one - I'm not sure if that backlight notification you flashed is compatible with the fascinate. That could be your problem. Can anybody else jump in here?
Sent from my SCH-I500 using XDA App
You flashed a i9000 kernel onto your Fascinate. Ay caramba.
DON'T FLASH NON-FASCINATE ROMS ONTO YOUR FASCINATE
Anyway, I can't think of anything except trying to flash the Fascinate CWM kernel back onto your phone again with Odin.
edit -- FYI, the only BLN kernels any Fascinate owner should be flashing are the ones from jt1134, available only via ROM Manager
s44 said:
You flashed a i9000 kernel onto your Fascinate. Ay caramba.
DON'T FLASH NON-FASCINATE ROMS ONTO YOUR FASCINATE
Anyway, I can't think of anything except trying to flash the Fascinate CWM kernel back onto your phone again with Odin.
edit -- FYI, the only BLN kernels any Fascinate owner should be flashing are the ones from jt1134, available only via ROM Manager
Click to expand...
Click to collapse
Figured as much... I read it worked and that is why I installed. Hopefully I can get a fix. Maybe I should do adb?
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
bloodywaterfox said:
I am new to power using with phones. I had went to install syndicate and my phone had crashed, i finally got it up and running with oden once, Tried it again, this time i can't seem to get oden to work. At one point my phone wasn't even turning on or doing anything until i had taken it to a sprint store hoping my insurance would cover it.
I can get into clockwork.
I can get into download mode.
Oden is not working.
and Installing from zip is not working.
I could really use some help with this.
Thank you.
Click to expand...
Click to collapse
Try another USB cable and also make sure it is plugged into the same USB port as before.
I've tried a couple already, any other idea's?
bloodywaterfox said:
I've tried a couple already, any other idea's?
Click to expand...
Click to collapse
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
bloodywaterfox said:
If there would be something wrong with the boot, is there a way to fix this? After using odin or installing from zip it goes right back into clockwork every time.
Click to expand...
Click to collapse
U still didn't answer my question. If Odin doesn't recognize ur phone try installing the drivers again
Sent from my SPH-D700 using XDA Premium App
Esteway.619 said:
Did u convert to ext4 before u tried to flash srf? Also srf didn't come with a kernel u need to flash a kernel right after the rom
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
bloodywaterfox said:
I have no idea, probably not. would you mind showing me how i can find these?
and I posted while you were posting.
I have tried several sets of drivers, and as far as i know odin reads/sees my phone fine.
Click to expand...
Click to collapse
Download and flash rfs2ext4 here's the link. http://forum.xda-developers.com/showthread.php?t=1109362
Edit: afther u flash this make sure u reflash the rom and then flash a kernel. Like genocide or twilight
Sent from my SPH-D700 using XDA Premium App
so i just run the zip from clockwork, then what? i'm a bit android illiterate, i really could use and appreciate the help.
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
bloodywaterfox said:
This is what i did, not sure if it is right or not, however it didn't work.
wiped.
ran rfs2ext4.zip
ran syndicatefro110-fullyloaded-signed.zip
ran genocide2.0_voodoosnd10.zip
and it still keeps boot looping.
I have also been getting a E:cant open /cache/recovery/log
Click to expand...
Click to collapse
What recovery are u using?? I would say try to really install the drivers on your computer and use Odin to go back to stock and start fresh.
Sent from my SPH-D700 using XDA Premium App
Thanks everyone for the help anyways, I found a .tar file that was a full install for odin and now i have it up and running.
I also figured out what i was originally doing, rooting and installing syndicate.
Thanks guys.
He didn't install a kernel.
I updated to EI22, stock w/OTA update. I then rooted and things were working great. Then about 1 week ago, I did a CWM backup and when I restarted the phone just kept automatically rebooting approx. every 3 -4 minutes. I could not stop it no matter what I did. Then I restored the backup and it worked fine. A few days later, I turned the power off to put in a my extra battery, and when I turned it on, the same thing happened. I had to restore twice fir it to stop this time. Then this morning, I did a reboot to see what would happen, and again it happened. Mind you it was working flawless before I restarted it. I have tried everything from removing programs, turning off the wifi, leaving the battery out for a half hour, but nothing. Sometimes after it reboots, I leave it alone for 15 minutes and then when I hit the power button, it just restarts.
Any ideas before I put back froyo??
Sounds like a bad flash. I would Odin all the way to Stock EC05 then root then flash a Gingerbread ROM. Your error is either in the kernel or recovery to happen immediately after boot. It could even be a flaky partition table.
Sent from my SPH-D700 using XDA App
OK. Funny, I flashed backed to a stock EC05 and did the OTA update so as to possible avoid any problems like this.
mszach said:
OK. Funny, I flashed backed to a stock EC05 and did the OTA update so as to possible avoid any problems like this.
Click to expand...
Click to collapse
I figured that but the problem may lie in the rooting which required you to flash a kernel or in your recovery module.
Sent from my SPH-D700 using XDA App
mszach said:
Any ideas before I put back froyo??
Click to expand...
Click to collapse
Your not alone on this issue. I am also considering going back to froyo
ADW was nice enough to bring up a crash report that I emailed myself. In the stack trace I see that android Package manager has died as a cause of the exception. I am not a java programmer so am at a loss here to what's happening.
See also this related post
So I flashed to the ACS ICS rom and so far no problems. What a great ROM!! Many thanks to Marcusant and ACS.
Sent from my SPH-D700 using XDA App
don't use the OTA.
just root ec05, flash CWM 5, flash modem update ec05 to EI22, flash a rom of your choosing. it's that simple. i don't see why people go the OTA route. it just causes problems with the recovery.
EDIT: also if you want Rom manager, check the kernel(or rom) for compatibility.
Why use ROM MANAGER at all? All the same tasks can be done from Clockwork Mod directly?
Sent from my SAMSUNG-SGH-I777 using xda premium
robmoney215 said:
Why use ROM MANAGER at all? All the same tasks can be done from Clockwork Mod directly?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I'm lazy sometimes and like to use a GUI...
Sent from my SPH-D700 using XDA App
robmoney215 said:
Why use ROM MANAGER at all? All the same tasks can be done from Clockwork Mod directly?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
It was not supported for the Epic before but with the new CWM5 it is. It is much faster to boot into recovery from ROM Manager rather than powering down and 3 fingering into it. Plus ROM Manager supports renaming your backups when you are doing them. Also ROM Manager will continuously update your CWM if new versions come out. There is also OTA updates available if the developer supports it on their ROM.
My wife was trying to change her font with the Rom Toolbox and it froze then boot looped. Has this happened to anyone else? Its a stock froyo with overstock and cwr. I would not go into recovery and odin would not recognize it. I finally got into recovery while trying to get into download mode for odin. In the excitement I re-flashed cm7 because it was still on her sd card. Her phone works now but I will try to get odin to work on it tomorrow. She really needs the GPS to work and cm7 just doesn't do it for her. Plus the whole thing about 911 being iffy. It's 1am here and I'm tired.
Hey man just flash a 2.2 rom like project v or bionix 1.3.1 or something.
Vibrant + ICS
It wont let me go from cm7 to bionix. i tried it.
Sent from my SGH-T959 using xda premium
Flash the JFD using odin.
Sent from my SGH-T959 using XDA App
Craven. Once you get it back to non-CM7, use this method to change your fonts. Much easier and you have total control, unlike Fontchanger which kicks me into a bootloop every single time I used it.
Trying Odin again. It doesnt seem to be working.
Odin can not see the phone. I'm downloading a different version now.
If you are not getting into download mode, try this: http://forum.xda-developers.com/showthread.php?t=1133987
i finally found a combination of cord and plug in that works. Everthing is good now and my wife is happily running deranged 9. Thanks everyone for the support. I hope you found my siries of unfortunate events as funny as i did.
Sent from my SGH-T959 using xda premium
Hello All,
I am quite new to the world of Android, but have searched and read up for multiple days on this site before finally posting my issue.
I have a GS4 that had been running stock with the MF3 OTA update. I finally decided to root and install safestrap to mess with a few custom roms. Everything went well. I was able to create a Rom Slot and load a custom rom for testing whilst keeping my stock in original form. NO issues what so ever. I used the Wicked Rom.... Eventually I decided that I would delete Rom Slot 1 and go back to stock. I followed directions to the T, deleted the slot and selected to boot from Stock. NO GO. This is where the horror begins:
Now, the phone boots up but I see the Samsung Galaxy S4 logo and it stays there...does not go back. I no longer see the SafeStrap recovery screen when booting up. --- I cannot even get into recovery on the phone any longer: it says recovery booting in blue and stays there.
I am able to get into Download mode to re-flash - but naturally none of the stock firmware files are loadable via Odin due to an error I keep getting NAND Flash! (Fail).
I finally decided to drive to Best Buy and asked the guy to flash my phone to stock there. He put the phone in download mode and used their multiflash tool which did not detect the phone and thus he could not move forward. The laptop did detect the phone at best buy, but their software did not and thus flashing did not occur.
I am looking for any and all advice to get this phone running without having to return it to Samsung....please and thanks in advance.
My apologies if my search did not yield a positive result and there is something out there....
Well There is no way to flash with Odin while on MF3, so that effort is completely fruitless at this time. Did the guy try a different USB port, cord or even restarting the computer he was using?
Can you get into your recovery to do a factory reset?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Best buy should be able to do it. I remember reading somewhere that someone had to go to 3 different stores before they found someone smart enough to do it.. Lol
Sent from my SGH-I337 using XDA Premium HD app
I cannot get into recovery at all, it just says recovery booting and sits there....recovery booting is displayed at the top left of the screen in blue.
The guy did not try a different port or reboot. When he plugged the phone in, in download mode, the computer did recognize the phone but his Samsung software did not.
graydiggy said:
Well There is no way to flash with Odin while on MF3, so that effort is completely fruitless at this time. Did the guy try a different USB port, cord or even restarting the computer he was using?
Can you get into your recovery to do a factory reset?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well he is an idiot for not troubleshooting his system. I have had the same exact thing happen with multiple different computers and phones. The computer detects the device correctly, but the program I needed to use would not. More often than anything a quick changing of ports or a reboot of the computer fixed it. I have had to completely wipe out the drivers a few times and reinstall them to get it to work. 9 times out of ten, it is not the phone that is the culprit, it is something else before the phone.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
FIXED
Well it seems the guy at my best buy was a TOOL! I took the phone in again today, had the battery pulled before I arrived - put it in download mode for him. Told him that Samsung tech support said he should reboot his pc. He did. Voila, reflashed to stock. Thank goodness....thank you guys for the advice.
Apply cold water directly to burned area.
Who's awesome?
ME!
Anyways, glad you are back up.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app