I have a HD2 on O2 in the UK that works OK other than this problem. The unit is running the latest ROM from HTC and is my second unit with this problem:
Whenever push email is selected for my exchange account at work, the unit will not go into standby mode. Sure, the backlight dims, but it won't turn off. The screen is still responsive. However, if I set activesync to check emails every 5 mins then the backlight will turn off and go into standby as per the backlight settings.
I would prefer to use push email if possible, but not at the expense of the battery lasting half a day and responding to touch while in my pocket!
Any ideas?
Related
How do you switch it off ? I have set the thing to switch off automatically after 2 minutes, but its still on after 3 hours and the battery has dropped from 99% to 40%. I had the bluetooth on and everything else switched off.
It is one week old.
Is the battery life normal ?
I'm sure it didn't switch off.
thanks
I have a jasjar. First thing i did, i uninstalled antivirus and skype. I keep it all day on with bluetooth active, and everything off at night. Based on calls and activities i put it on charge every 3 or 4 days.
I have set my MDA Pro to turn off after 3 minutes, and it does indeed turn off. If I don't touch it (turn it back on), the device can go all day with negligible battery usage (a few %).
Bluetooth is off. WiFi is on. 'Incoming beams' are off.
I sync by cable, so the device is powered while syncing. If you sync via bluetooth, then perhaps activesync is keeping the device awake even though it is not powered.
If you turn it off manually (power button on edge near SD card slot), does it turn itself back on? Mine does that when activesync is running and connected. Otherwise it is happy to stay off until I get a call or some reminder.
go to the phone options and change from Auto band select to GSM. Using 3G sucks battery like a mofo
my main issue is that it should have turned itself off
1) in the comms menu, only bluetooth was on
phone was off
wireless was off
beam set to off as well
From 98% charge to 40% in 3 hours, when I hadn't used it at all.
I am sure that is not usual.
So gsm/3g/gprs shouldn't have any bearing on the batt life, as it was set to off ....
was bluetooth actively doing anything during this time or just on and sitting there?
Firestomer, the following eat batteries:
- PIE running in the background
- Camera app running in the background (can be activated when you shut the camshell as it is easy to hit the camera switch on the front)
- UMTS (which is not a problem for as your radio is off)
hi joe
BT wasn't doing anything - I closed the clamshell and left it expecting it to switch off, but I guess it didn't since it chewed through nearly 60% power in 3 hours.
Also, what is the technique for switching it off ? I have pressed the power button to the left of the SD slot, all it does is switch the backlight off. I have held it for 0.5 seconds, 1, 5, 10 ....
I am loosing patience with the thing - wifi isn't working for me and TomTom5 keeps forgetting it has a GPS connection ...
btw what is PIE ??
firestomer
PIE = pocket IE
Two clicks of the off switch will turn the device off
On my device BT only uses about 10/15% of battery over a 12 hr period
Are you talking about svitching the device entirely off? i dont think that can be done...exept if you take the battery out and put it back in and dont turn it back on
yes as close to off as possible when I am as sleep etc, but it guess it needs to keep the clock and alarm and keypressed detect powered ....
Can anyone explain why my wifi connection is dropped when I put my phone into standby mode. This does not happen when I am using GPRS?
If the battery was not so crap I would not need to keep putting it into standby mode.
I guess its because when the device is in standby all the PDA functions are stopped, but the phone functions are not. GPRS is connected via the phone line which is active in standby mode thus it does not drop.
This does not sound out of the ordinary to me.
thanks for confirming my fears. So does anybody know how you can use this device for 8 hours (working day) with wifi switched on? I normally leave it logged into IM when I am at home and do not want to leave it charing all the time.
Try Start-Settings-System-Power-Advanced and untick the battery Power Timer.
Dave,
Agile is clever enough not to power off the device but and all that happens is the screen dims. I am trying to put the device in to standby but leave wifi on along with running agile messenger but this does not seem to be possible. The reason for this is to prolong the battery life by not having the screen on as wifi zaps my juice so much more than GPRS.
It is however possible when using GPRS as the phone function works when it is in standby.
Marc
i needed to do this on my dell axim too, used a program called screenlock which kills the display and locks the buttons. you press 2 buttons to wake the system. Wifi and other apps continue running.
my post http://www.aximsite.com/boards/showpost.php?p=840747&postcount=2
the app
http://www.pocketgear.com/software_detail.asp?id=14621
be careful, if you cant work out which hardware buttons its using, you'll have to soft reset your device (if it works at all, i've not tested on wizard)
let me know if it does what you want
just tested and it appears to use messaging and voice speed dial as its 2 buttons
Thanks I will test it asap
Hey everyone! I'm searching for a good IM that keeps on running in the background over Wifi and gives a sound when a new message comes in.
Beejive looks really cool, but I have a big problem: My device is set to turn off the backlight after 30 sec. So far no problem. At first I had it turn into standby after 1 min. But by doing that the Wifi connections breaks and after I turn the phone back on it connects again. So I turned this option off. Every programm keeps on running with the backlight off after 30 sec., but if Beejive is opened it still gets the phone into standby after 1 min. I haven't found an option in the configs of Beejive that can turn that off.
Anyone has a solution for that?
Another problem is that Beejive doesn't show messages that were sent to me when I was off. Not good at all.
Thanks!!!
Weird
Beejive sends me messages I received weeks ago (last time I used it) and got disconnected because of it going to sleep. (Even if I have logged into the account severl times between now and then via my PC.
I don't think there is anything the progrm itself can do to keep the phone awake but you can change asetting in advanced config to allow wifi in standby.
I have setup the phone to sync weather for example every half an hour. If the phone is on stand by it does not sync. It is as if it turns off the data connection. Any help would be appreciated.
Any ideas? It will only sync when the phone is awake and unlocked? If the phone is locked it doesn't sync
Im surpriesed nobody can help with this!
You are certain it is only the weather that is not auto updating?
sharkie405 said:
You are certain it is only the weather that is not auto updating?
Click to expand...
Click to collapse
That is the only thing I have noticed so far.
No help at all? Basicily data does not sync at all when the phone is on stand by. It is as if the data connection disconnects. I cant seem to work out how to "keep it alive" Any help would be appreciated.
GhostXSeries, what activity do you expect from your phone in stand by (sleep) mode?
Sleep mode also called "standby mode" is an inactive state of the device that is quickly brought back into action by touching any keyboard key or pressing the on/off switch. It is used to save battery power.
In sleep mode the screen is turned off, all system processes are suspended (including data transfer), and the CPU is throttled down to its lowest power state - no activity. However, all instructions and data still reside in memory, and dynamic RAM memory chips require power to hold their content.
So what kinda sync do you want to have?
AndrewSh said:
GhostXSeries, what activity do you expect from your phone in stand by (sleep) mode?
Sleep mode also called "standby mode" is an inactive state of the device that is quickly brought back into action by touching any keyboard key or pressing the on/off switch. It is used to save battery power.
In sleep mode the screen is turned off, all system processes are suspended (including data transfer), and the CPU is throttled down to its lowest power state - no activity. However, all instructions and data still reside in memory, and dynamic RAM memory chips require power to hold their content.
So what kinda sync do you want to have?
Click to expand...
Click to collapse
The main one I would like to have updated is the weather. I do not see the point of being able to set the weather to automticly update every half an hour if the phone does not do it while in stand by mode. If I turn the phone on and update maually it works fine. Is there any way to sort this?
My phone will automatically update itself if the set amount of time as passed while it was in standby mode. Meaning, if I set it to autoupdate every hour and I've had my phone in standby mode for 2 hours, when I wake it up, it will automatically sync the weather and any other data that should have been syncing during it's standby phase. Does your phone not do this as well?
There is also an app called "Screen Off" which will ONLY turn off the screen and not put your phone in stand by mode which means that all data and such will continue to function while your screen is off.
Oh and I was waiting on a definitive repsonse to the "only weather" question I asked. Obviously, just your weather not updating properly and ALL your data not updating properly are two very different problems.
I did not read the first post carefully. So you mean - the system timers do not work properly - they don't wake up your phone from standby for weather update?
I have mine set to do the same, but fo example for again the weather, I have it set to update every 1 hours, when I leave the phone on overnight and check it in the morning it does not update untill I press the manual update button.
Say I had the phone updated at 11pm and put it on stand by, check the phone at 8am the last update time was 11pm. It will stay at 11pm and only when I press the update button does it then update. It is not an overly big thing but I am under the impression that If I set the phone to update every hour even if it is on stand by or not the latest it should be behind is 59 minutes!
So the problem is on SOME OCCASION,
the phone doesnt automatically sleep given i set the sleep time to 30 sec, which causes major drainage in my battery life. I use go SMS, and i turned on the msg pop up, it would turn on my screen but wouldnt turn off after the 30 sec. Or let say after i read a email but left it on the table as i assume it will turn off automatically after a given amount of time, it would remain on. So im not sure what's causing it any solution?