Database Users

bluetooth skipping?

anyone having problems with bluethooth skipping? works fine when I have my phone sitting somewhere, even when 20 feet away, but starts skipping when I put it in my pocket and do anything active. like going for a jog. kinda defeats the purpose. using lantec 930 backbeat headphones. anyone know what could be causing this, it's really annoying.

I'm having the same problem with my Wireo Blutooth headset since upgrading to CM5. Anyone have any ideas?
Edit: Before I rooted and installed CM5 my bluetooth worked fine, now not so much.

I stream Pandora to my car over Bluetooth and haven't had a problem yet. Although on my G1 it used to sound as if it played maybe a half second too slow. But on the N1 its been nothing but glorious.

hurrycaine3000 said:
anyone having problems with bluethooth skipping? works fine when I have my phone sitting somewhere, even when 20 feet away, but starts skipping when I put it in my pocket and do anything active. like going for a jog. kinda defeats the purpose. using lantec 930 backbeat headphones. anyone know what could be causing this, it's really annoying.
Click to expand...
Click to collapse
bluetooth range is very finicky on this
I use it at the gym and most of the time its OK
But sometimes it cuts out even like 3 feet away if i have a machine/bench in between the phone and headset.
*Note* im on stock ROM
I know its not my headphones because i used the same ones with my HTC diamond with no problems at all

damnit, seems to be some hardware issues with the radio's on this phone. Wifi, 3g, and now bluetooth all seem to have some kind of issue. damnit. It's such a great phone except for these issues. damnit..

I have no issues with my N1 and bluetooth with activity. Phone in pocket, or phone is a charging drawer at work. I can easily push music to my stereo bluetooth without any skipping.
I am using the Rocketfish bluetooth headset from bestbuy for 59.99. They are RIDICULOUS compared to the motorola s9hd's for 99.99.
These are a little more uncomfortable but whatever, 40 dollars less INSANELY loud with INSANE bass response and it even comes with like 5 different sound effect things like party hall, wide spectrum, its cool. try em.

I sometimes have the same problem with my bluetooth receiver in my car.
I do not have this problem with my headset or my bluetooth speakers on my desk.
With my Samsung Galaxy I had this far more often - with all devices. Restarting the Galaxy did help. I haven't tried restarting the N1 in these situation.

No issues with Bluetooth with:
Motorola S805 (AD2P & Headset Profiles & A/V Remote Profile)
JayBird SB1 (AD2P & Headset Profiles & A/V Remote Profile)
2010 Lexus HS250h (AD2P & Hands-free Profile & A/V Remote Profile)
"Stock" & CM 5.0.2. -- Only BT N1 issue I have is with my Nissan's hands-free which is very well documented.
Cheers,
Kermee

Can you pause using JayBird controls?
Kermee said:
No issues with Bluetooth with:
Motorola S805 (AD2P & Headset Profiles & A/V Remote Profile)
JayBird SB1 (AD2P & Headset Profiles & A/V Remote Profile)
2010 Lexus HS250h (AD2P & Hands-free Profile & A/V Remote Profile)
"Stock" & CM 5.0.2. -- Only BT N1 issue I have is with my Nissan's hands-free which is very well documented.
Cheers,
Kermee
Click to expand...
Click to collapse
I just got the JayBird SB1 today. Are you able to use the headset controls to pause music playback, or jump to next/previous track? It doesn't work on my N1.
I can answer incoming calls and hang up, but that's all. Running stock ROM on my N1. Would like to know if it's just me, or all N1's.

I have a pair of Motorola HT820, S9's and the Plantronics/Altec Lansing Backbeats.
They all work fine indoors, but they are lousy outdoors and cut out a lot, I've spent some time testing and here's what I've found out
1. The signal cannot penetrate 1 inch of flesh, a hand will block the signal.
2. If unblocked the signal has a pretty long range.
3. If indoors the signal will bounce a _lot_ meaning that it almost doesn't matter where the phone is.
4. If you're outside and not near a wall/building/hard surface for the signal to bounce off of, if will cut out.
5. BT headset antenna's are generally next to your ear or behind your head, meaning that there is generally no route from the phone to the headset that does not go through at least 1inch of flesh or bounce off something.
I have yet to find a solution for this

SilentMobius said:
I have a pair of Motorola HT820, S9's and the Plantronics/Altec Lansing Backbeats.
They all work fine indoors, but they are lousy outdoors and cut out a lot, I've spent some time testing and here's what I've found out
1. The signal cannot penetrate 1 inch of flesh, a hand will block the signal.
2. If unblocked the signal has a pretty long range.
3. If indoors the signal will bounce a _lot_ meaning that it almost doesn't matter where the phone is.
4. If you're outside and not near a wall/building/hard surface for the signal to bounce off of, if will cut out.
5. BT headset antenna's are generally next to your ear or behind your head, meaning that there is generally no route from the phone to the headset that does not go through at least 1inch of flesh or bounce off something.
I have yet to find a solution for this
Click to expand...
Click to collapse
i feel ripped off....bought the 903's just for running outside, and experienced this for the first time today. i was running with the phone in my hand, because it bounces up in down in my shorts pocket.
is this just for stereo streaming of music? i have known alot of people use mono, single ear phone headsets outdoors with no issues at all...

I think it is all about proximity of the bluetooth receiver in your headset to the phone. I've got the sony behind the head bluetooth phones (for many years now) and I know the receiver is on the right side ear so I keep my phone on the right side of my body when I have tunes going on the headset. More of a learning what doesn't work and then incorporating some wardrobe choices for the gym, on the bus, walking that keep the phone positioned where you need it. Bluetooth is not perfect for sure.

Bluetooth A2DP Lag?

Hello peeps,
I wonder if any of you folks with an HD2, use it with Bluetooth A2DP and satnav?
My predicament is this...
I am a motorcyclist, and occasionally listen to music from my HD2 via a Bluetooth A2DP helmet. It works great, with good sound quality and no skipping of music tracks using Manilla Music Player.
I also have Garmin Mobile XT, which I often use in the car, and the voice prompts and directions work great through the HD2 internal speaker.
However, if I want to use Garmin Mobile XT with my BT Helmet, it works OK, with the exception that audio coming from Mobile XT seems clipped right at the beginning. For example, the instruction:
"Drive 3.4 miles, then keep left." - which is how it would sound through the internal speaker...
...will more often than not sound like...
".(point) 4 miles, then keep left." - when heard through the helmet.
As you can imagine, it would be quite dangerous to have to keep looking at the screen to confirm instructions, and you can believe how confusing this is when actually on the road and relying on voice direction only.
I have searched thorugh all of the HD2 forums for the tags 'bluetooth' and 'audio', found some similar issues that peeps were having with music player playback stuttering and the like, and tried some of the remedies offered by other forum dweller (like the increase file cache, line rate, etc), but to no avail.
As a computer professional, I am inclined to say that the symptons seem like a buffering or issue. But obviously, I am not a cellualr expert, so I will leave the really diagnosis for the pro's here ;-P
Perhaps one other lucky HD2 owner will have experienced (and hopefully had solved) a similar issue (perhaps not with the BT helmet tho ;-P).
Thanks for taking the time to read my post, and I'd greatly appreciate any feedback anyone has to offer.
Rgds,
drkmtr

Me Too!
I'm using a Samsung SBH-650 Bluetooth Stereo Headset, and I get exactly the same thing! I've no idea about a solution, but at least you know you're not alone.

I have the same with Jabra BT530. No reaction from HTC, no solution here.

i saw once a thread about a similar problem.
there they wrote that the bt-chipset which is used by htc for the hd2 is a Broadcomchip. They told, that there are some differences between the os and the chip and something about the problem, that it switches to standby mode too early or something like this.
this could be the issue. your phone turns the chip too early in standby mode and you cant hear the whole sentence cause it needs time to turn it on again.
sorry mate, im not having a solution, but thats something i read. maybe it helps.
DN41

Bluetooth is a slow (imagine RS-232) comms protocol that was designed primarily for local audio connection. EDR (Ehanced data rate) was brought on for high data rate stereo connections.
If you want stereo audio connection, simutaneous phone connection and GPS connection running while all the associated SW packages are running in your phone, then you are asking a hell of a lot of even a 2.5Ghz laptop!
PLEASE, lets get the device in perspective......

Hello,
Sorry for my english.
I'm biker too, i'm using a Parrot BT Headset and i've got no problem.
I'm listen to music (with S2P) and using copilot live at the same time without problem.
Sometimes instead of S2P, i'm listening to webradio (with Wunderadio) and using copilot live without problem...
Listening radio or music allow that the BT channel is always up.
regards,
Thierry

i'm not a motorbiker, but i use bluetooth headset for listening music.
When wifi is on, and there is not wlan accessible, bluetooth lags every 30 seconds when trying to connect.

I'm reviving this ancient thread, cause I'm having a similar problem with my HTC Amaze and it's driving me nuts.
Sound is played back with about 2 seconds lag, very, very annoying. Never had any issues with my Motorola Droid...
Can anyone explain why this is happening and if there is a possible fix/hack?
Help?!

Bluetooth Streaming Audio from Pandora to Car skipping

unfortunately when i connect bluetooth to my car radio the music skips about every 15 sec. very annoying. Anyone else having the problem.
I have an iphone 3gs that doesnt skip and works great. I love the Evo but bugs are continually showing up.

Its your internet. Try updating your prl.

i did update the prl before i tried it.
still does it.

I have a bluetooth reciever for my AVR and I noticed some skipping as well. Not as frequent as you are saying but if I moved more than 10' away it would be rather bad. The Bluetooth range seems to be poor. In a car I can't imagine you having a problem. I have heard of some issues with factory bluetooth.

I had same problem till I decided to turn off my wifi.. and it started working fine.. it just doesn't have to do with Pandora, its will any Music that you stream over Bluetooth..
Just turn off your wifi and it will work fine.
Thanks

Or just place your phone somewhere else in your car. Bluetooth has very lousy range (isn't it like 10 feet in perfect conditions?), and as such moving it a foot or two somewhere else could make a world of difference.

Its definitely not the internet. I could be at home in wifi with phenominal internet it even laying it off of my SD card. If im in a vehicle or on a bus, its pretty solid and works really well. I walk out the bus and walk around either to m next bus or to work and it fails to play for more than 4 seconds without skipping. And its not like a short, nuisance of a skip. It often stays skipped for up to 3 seconds at a time. Completely unusable. Happens however i connect my phone to any a2dp device. Tried tweaking the /etc/Bluetooth/audio.conference file as suggested in a couple nexus one/s sites, but unfortunately seems to be specific to those phones. This is making me hate this phone. Every other phone I've had in the past two years does this just fine. Whyis it having such a hard time with such a simple task that others have done perfectly? Even other Roms work better but i like also better than sense anyday. Maybe its a kernel issue?. I really want this fixed. But it seems like no one is even trying to work towards a solution. Not on the surface anyway.

Did you try turning off your wifi and any other unneeded services? The only time I have had skipping over bluetooth is when I have my wifi on as well, other than that it streams smoothly through my car stero and computer over bluetooth.

TechniShawn said:
Did you try turning off your wifi and any other unneeded services? The only time I have had skipping over bluetooth is when I have my wifi on as well, other than that it streams smoothly through my car stero and computer over bluetooth.
Click to expand...
Click to collapse
This.
If that doesn't help, then if possible, you should use an aux in cable to prove it's only a bluetooth issue. If it still skips, I'd try a new rom and/or kernel. A2DP performance seems much improved in CM7 compared to Sense roms.. or at least it seems better to me.

I've had the same skipping problem with my bluetooth earphones and evo. The only slight solution that I've had was holding the phone in direct line of site with the bluetooth earphones. When I do that, it doesn't skip as much.

Streaming bluetooth audio to car stereo
Thanks Anku13, your fix works. Just installed a Clarion CZ501 bluetooth receiver in my car, experienced skipping audio every 15 - 30 seconds once my Leo connected/streaming. Killing WiFi was the trick. Love not having an AUX cable lying around in the cabin.

[Q] Spotty Bluetooth Performance?

I'm able to connect my Atrix to my JVC double din in car stereo system via bluetooth and it connects and pairs just fine. The problem I have is that the music "skips" or loses sound every few 20 to 30 seconds. It plays the whole music file but seems to drop out here and there. My old tilt 2 played on this same jvc beautifully using bluetooth. But the Atrix cant keep up? It happens no matter if I play music files through the stock android music player, or Power Amp player. What gives?

I also have a JVC Kw-Avx810 with bluetooth adapter installed. I have the same problem, for calls it works perfectly but for music its a bitt frustrating to hear music skipping each 30 seconds. Sometimes I am able to hear the music without skipping and that happens when I first play the music on the phone and while the music is playing on the phone I turn on bluetooth on the phone and the after 10 seconds it begins to stream the music to the Jvc Unit without any problem. I do that every time that I wanna hear music on my Jvc unit. Havent had any more issues so far.

I use it for my ford sync and at times it will do strange things that my nokia n95 never did but for the most part it works well...

Namuh said:
I'm able to connect my Atrix to my JVC double din in car stereo system via bluetooth and it connects and pairs just fine. The problem I have is that the music "skips" or loses sound every few 20 to 30 seconds. It plays the whole music file but seems to drop out here and there. My old tilt 2 played on this same jvc beautifully using bluetooth. But the Atrix cant keep up? It happens no matter if I play music files through the stock android music player, or Power Amp player. What gives?
Click to expand...
Click to collapse
I had a similar problem when I had my streak. It was because I was pairing Audio with one device and bt phone with another. If you are doing this it will cause that. I use my Sony stereo just fine, will disconnect occasionally, but quality is great.

I use my atrix with my prius, and so far so good.I haven't had disconnect issues yet.

I think it's something JVC could probably fix with a firmware update. The atrix streams just fine to both my Sony and Kenwood headunits.

I have the same problem.
http://www.avforums.com/forums/car-entertainment-ice-sat-nav/539264-help-jvc-avx33-bluetooth.html
http://www.jvc-victor.co.jp/english/car/bluetooth/2007.html
The key terms: "Usable but not stable" , although it was not tested with Atrix, it is evidenced on both HTC and Motorola phones.
Great move JVC .. you've made your product useless to me and tarnished your reputation at the same time. Couldn't get your guys to write a new firmware ... Cant get me to buy another one of your products.
The same looks very like it will be true with Motorola's Andriod phones. Both JVC and Motorola will soon be wiped off my present or future ownership map. Woooo

Mine drops out/ goes silent / loses bt connection about once every 8-12 minutes when connected to my sony head unit (mex-bt5100). I turn off bt then back on, then restart my streaming radio.
Sent from my MB860 using XDA App

I have a jvc double din unit too. I don't experience any issues with audio... however the phone is a bit garbled when connected.
Have you tried moving the bluetooth dongle to the front USB port?
Sent from my MB860 using XDA Premium App

i Have a single DIN (AVX33), the bluetooth is built-in so there is no dongle.
I read quite a bit about this problem .. it is related to the phone hands free profile sending signals to the headunit in a way that the headunit cannot handle without disturbing audio. It is exasberhated by low signal strength (both bluetooth signal and GSM signal), and also by the fact some andriods will give equal transmit priority to these hands-free signals that it does streaming audio. This is why turning wifi off helps a little (reduces interference). The signals that are interfering with streaming audio are the ones about battery life, and GSM signal strength. As signal strength chagnes, the phone sends out a new value despite the headunit not needing to do anything with it. This is what interupts the audio consistently but irregularly
End result .. it can be fixed by software adjustment on the andriod (do not send updates when streaming audio .. unlikely with Atrix unless Moto gets their thumbs out of their asses), by software adjustment on the receiver (unlikely as JVC is a **** company that does not care about my woes), or by mitigating the problem as I appear to be forced to do. I do this by turning off the "phone" porition of the bluetooth. Or by starting the music and THEN connecting to bluetooth. Unacceptable to me but I have no other options.
I f**king hate how complex our electronics have become and how consumers are powerless to fix these problems DESPITE the fact some of them have a higher level understanding of what the problem actually is. (therefoer I will not be purchasing anything from JVC or Motorola ever again. They prevent me from solving problems and refuse to fix them for me.)

Really, really poor bluetooth audio quality?

On my G6, I have really terrible audio quality over Bluetooth connections, I've had two separate G6s, of different colors, received weeks apart, and they both suck for Bluetooth audio, especially my Sony car stereo, and LG Tone Free... can anybody else report on their experience? Does your LS993 sound awful on your Bluetooth devices?

Have a fairly new G6 bluetooth og Bose earpiece working very well, also on 2010 F150 pick up and 2012 Buick no audio issues. Audio has been fine so far.

Mine also is pretty poor. The volume level is about half the level of the satellite radio or fm stations in my car

Hello all.
I had G2 in the past and I use to listen music in my car, using Bluetooth connection to Pioneer head unit. I have Spotify premium account and I have my Playlist downloaded with the best quality. However once I got G6 a week ago I noticed that audio quality from the g6 with the same songs, same Playlist, same Spotify account, is not as good as it was with g2. So I did a short research and found a thread in the net where people reported the same problem.
A guy from the thread suggested to disconnect all other Bluetooth devices from the phone (like smart watch or band) and actually that solved my problem. I have MiBand2. Once I disconnected it the audio quality became as good as before.
So guys, if you have a smart watch, try to remove it and check the quality again. I hope that helps.

I went a couple of months with no issues on my Kia Optima, then suddenly, I started getting really bad aliasing on the highs. As said above, I turned off my Huwaei watch and the sound was normal again. After a bit, I turned my watch back on, and it remained fine.
I had it happen once again many weeks later; and again, a quick off - wait - on, cycle with the watch fixed it. So whatever it is, seems to be a bandwith allocation issue with the bluetooth software. From March '17 thorugh almost Sept '17 and I've only had to do this twice? I think I can live with this.

Hey heres something for you to try..
Download WiFi Scanner from App Store.. Look at your 2.4ghz networks.. then keep in mind your cordless phones, IP Cams, Walkie Talkies, baby monitors in your area.. You may be a victim of signal interference.
Bluetooth operates on the 2.4ghz spectrum along with a TON of other devices now available.
Your sony stereo may be the culprit.. if is an aftermarket "Xplod" deck
Im an audiophile, and my G6 runs better than my Samsungs.. (also no issues with the "preventative volume warning"
What you also may have is an app that is causing the volume to lower...
For example.. when i stream the music player with the stock app, sometimes Snapchat notification sounds cause the rest of the volume to be lower..
Google Maps is another one that can hijack the sound but you can control in settings.
For using music try a different app ( i use Maple Player) and it works great ..
Based on your experiences i think its something outside causing the problem to be honest. but thats ALOT of trial and error to deal with.. if worse comes to worse- you can always get an aux jack bluetooth adapter for your car stereo if it IS the stereos bluetooth receiver .