I tried to install apps2sd for my Samsung Galaxy 3 (GT-I5801) which has android 2.1-update 1 stock rom.
using this post
http://forum.xda-developers.com/showthread.php?t=804574
but something went wrong and it failed to install apps2sd for my mobile. My phone was already rooted before this and was working well and samsung kies could detect it.
But after unsuccessful installation of above , my sh file under system/bin/sh got corrupted and now kies don't detect my device. also
- exec '/system/bin/sh' failed: Exec format error (8) -
error occures when i try to connect to adb from cmd ( windows xp).
After resetting phone , kies detected my phone and it asked for update but it failed at 98% installation of plug-in update ( required for android 2.2 froyo update )
I tried with many file explorers as sh file seems to be 0 size and sh_bak as valid but no app could recover that. Also i am unable to remove superuser permission app as samsung service center will not tolerate my phone as it was rooted. I tried z4root but it says your phone is rooted and it does not un-roots phone or re-roots phone.
Please help me. I am from INDIA.
araandroid said:
I tried to install apps2sd for my Samsung Galaxy 3 (GT-I5801) which has android 2.1-update 1 stock rom.
using this post
http://forum.xda-developers.com/showthread.php?t=804574
but something went wrong and it failed to install apps2sd for my mobile. My phone was already rooted before this and was working well and samsung kies could detect it.
But after unsuccessful installation of above , my sh file under system/bin/sh got corrupted and now kies don't detect my device. also
- exec '/system/bin/sh' failed: Exec format error (8) -
error occures when i try to connect to adb from cmd ( windows xp).
After resetting phone , kies detected my phone and it asked for update but it failed at 98% installation of plug-in update ( required for android 2.2 froyo update )
I tried with many file explorers as sh file seems to be 0 size and sh_bak as valid but no app could recover that. Also i am unable to remove superuser permission app as samsung service center will not tolerate my phone as it was rooted. I tried z4root but it says your phone is rooted and it does not un-roots phone or re-roots phone.
Please help me. I am from INDIA.
Click to expand...
Click to collapse
If you are familiar with flashin usin odin...just download the Asia firmware I5801DDJG6 from this link http://www.fileserve.com/file/Ym3b23D...or follow this thread...http://forum.xda-developers.com/showthread.php?t=778880
Sent from my GT-I5801 using XDA App
I got this weird problem with installation, hopefully somebody will know how to solve this here.
I've installed developer's preview before (on the same laptop) with no problem, even uninstalled and re-installed with no trouble. This time, when I tried to re-install (fresh install on a different partition, not upgrade), I got a tcpip.sys 0x0000098 error. So after that, I tried "sfc /scannow" in command prompt, but it showed no error in system files.
Anybody have a clue on what to do next?
I'm running Windows 7 Home Premium x68, trying to install Windows Developer's Preview x68. Let me know if I need to provide additional information.
Hiiii..im new to windows8...at present im on windows 7...want to upgrade to 8...please answer some queries...
1) should i upgrade or should i install freshly
if im planning to install freshly do i loose data from other drivers excluding system driver(C) in my case..?
2) At present i have so much data on windows 7 like android drivers,other drivers,apps,softwares etc which are related to c drive..how to backup them..? and when i come back with windows 8 after installation i can restore the apps and others..?
3) should i install mother board drivers after installation...?
in windows i dint installed as i installed it on xp..
4) which is the best method of windows 8 installation..? i mean boot method or by clicking setup.exe...?
5) I heard we can also install windows8 with USB/PENDRIVE please tell me the procedure
i have downloaded the windows8 from torrentz so i dont have ISO image..how to generate..?
6) Any other suggestions or advices or cautions plz feel free to give..
THANX IN ADVANCE
vinaysweetheart007 said:
Hiiii..im new to windows8...at present im on windows 7...want to upgrade to 8...please answer some queries...
1) should i upgrade or should i install freshly
if im planning to install freshly do i loose data from other drivers excluding system driver(C) in my case..?
2) At present i have so much data on windows 7 like android drivers,other drivers,apps,softwares etc which are related to c drive..how to backup them..? and when i come back with windows 8 after installation i can restore the apps and others..?
3) should i install mother board drivers after installation...?
in windows i dint installed as i installed it on xp..
4) which is the best method of windows 8 installation..? i mean boot method or by clicking setup.exe...?
5) I heard we can also install windows8 with USB/PENDRIVE please tell me the procedure
i have downloaded the windows8 from torrentz so i dont have ISO image..how to generate..?
6) Any other suggestions or advices or cautions plz feel free to give..
THANX IN ADVANCE
Click to expand...
Click to collapse
1. Fresh install, preferably dual boot Windows 7
2. Before installing Windows 8, create a new partition for data, and an extra partition for Windows 8, so you can dual boot and access data from both os.
3. You won't need mobo drivers, at least I didn't.
4. Boot method
5. Download the Windows 7 USB tool from the Microsoft site, use that to create a bootable USB.
Sent from my Galaxy Nexus using Tapatalk 2
win 8 software too few good games.
can i get the download link for windows 8 iso image for 32 bit(x86)operating system plzzzzzzzz
vinaysweetheart007 said:
can i get the download link for windows 8 iso image for 32 bit(x86)operating system plzzzzzzzz
Click to expand...
Click to collapse
Careful.. warez not allowed here.
Sent from my GT-N8000 using Tapatalk HD
Hello all,
I made a fresh install on my PC with Windows7 x86, because I bought a new and bigger SSD.
On my old Installation I had all the Tools for my HD2 installed, without any Problems. Okay, it's a long time ago I made the Installation, but it worked.
On the new System, I always receive a message when I try to install Windows Phone Power Tools that the Microsoft.Smartdevice.Connectivity.dll V11.0.0.0 is missing. I searched Google and find out that the dll will be installed by Windows Phone Developer Tools. But it's allready installed!! Also Windows Phone SDK 7.1 is installed.
I cant find any V11 on Google and no other hint how to install the DLL on my new System.
Any ideas from someone??
Thanks and Greets,
Masterslice
Okay, it seems that no one can help me out with this problem..
I made another thing, my old system is on the old SSD. I put back this SSD in my PC and booted the system.
As I found in Google, the location must be C:\Program Files\Common Files\microsoft shared\CoreCon\1.0\Bin\, but there was no dll..
I searched for the mentioned dll and found it here:
C:\Program Files\Common Files\microsoft shared\Phone Tools\CoreCon\10.0\Bin\Microsoft.Smartdevice.Connectivity.dll in Version 10.1.40219.209
And the Windows Phone Power Tools were installed here:
C:\Users\Username\AppData\Local\Apps\2.0\07VV00KK.TYR\L17KJWPJ.ZXY\wind..tion_89698295f69f556b_0001.0000_18b3ec4d3a81c136
Why a part of the folders has such kind of strange names, i dont know..
Next step was, I backup the folders from my old system and copied them to my new system.
Now I can start the WindowsPhonePowerTools.exe and connect with my HD2! It works!
But I cant understand why I can't install all from the beginning..
Better to make a Backup also from this programm!
Seems to be solved.
new WPPT is for x64.... only x64 can install WP SDK 8 needed for WPPT
but thx for your way to fix that
dxdy said:
new WPPT is for x64.... only x64 can install WP SDK 8 needed for WPPT
but thx for your way to fix that
Click to expand...
Click to collapse
Yes, thats the reason why I installed all the old versions, like the WPDT and WPSDK 7.1 with Update and Visual Studio and so on... I tried a lot, now way for me to fix this error! Only the posted solution worked for me!
I am happy now and I will install in a few days my old SSD into my Laptop with a fresh install from Win7 x64!
Masterslice said:
Hello all,
I made a fresh install on my PC with Windows7 x86, because I bought a new and bigger SSD.
On my old Installation I had all the Tools for my HD2 installed, without any Problems. Okay, it's a long time ago I made the Installation, but it worked.
On the new System, I always receive a message when I try to install Windows Phone Power Tools that the Microsoft.Smartdevice.Connectivity.dll V11.0.0.0 is missing. I searched Google and find out that the dll will be installed by Windows Phone Developer Tools. But it's allready installed!! Also Windows Phone SDK 7.1 is installed.
I cant find any V11 on Google and no other hint how to install the DLL on my new System.
Any ideas from someone??
Thanks and Greets,
Masterslice
Click to expand...
Click to collapse
I got the Same problem
Can you give me the file please
How to install in my win 7 its showing me this message again again
help me
mnksngh706 said:
I got the Same problem
Can you give me the file please
How to install in my win 7 its showing me this message again again
help me
Click to expand...
Click to collapse
I am sorry, but I can't help you and give you the file.
Because I work now on my System with Windows 8.1 and I didn't installed all the Tools for HD2.
My HD2 is working, but I didn't used it since I got my Lumia820.
I can't install Windows 10 Technical Preview on my Samsung RV509 laptop (Core i5 and 6Gigs of RAM). I tried doing a clean install, and once I boot from the flash stick It gets stuck on the Windows logo and the loading dots doesn't appear, so I tried to do an upgrade from Windows 7 and once it restarts it gets stuck on the windows logo and doesn't load after that (I tried both 32 and 64bit versions) then i get the error 0xC1900101-0x20017. So I tried to install it inside a virtual machine and i tried another machine,and it did install just fine. I tried everything I can from trying to launch the setup from the command prompt but still once it restarts it gets stuck on the windows logo. I'm not sure what do I need to do to get it to install and boot. I've tried with every single build since the insider program started till 9926.
I would really appreciate any help in this matter. Thank you.
I think you didn't really tried a clean install, since you wrote that you've tried to upgrade later. Clean install means you erase all traces of previous system installation. Also, it's good to delete all partitions. Maybe you're hard disk is MBR formatted and Windows 10 requires GPT (just a suggestion, I'm not sure about that).
Secondly, are you trying an UEFI install? I've had Win10 for a couple of months now but I remember having problems with starting UEFI installation from USB stick. To do this, you have to change partition layout on usb stick to GPT, then make new primary partition, format it to FAT32 and copy all files from install iso to usb stick. Then you can start your install in UEFI mode and I think this will help you. Just remember to delete all partitions and let Windows create new partition layout for you, this way it will create EFI partition.
If the installer says it can't create partitions in UEFI mode, you will have to change partition layout to GPT by yourselft. You can put your hdd in a PC and use a Windows based tool (search google) or maybe some Linux LiveCD will let you do that without removing your hdd.
All I did was just use demon tools and install over my w7. It installed as Uefi. Don't like it and w10 gave me an option on restart to roll back my system. I did and went back to w7.
You shouldn't use Daemon Tools to install Windows from an ISO. If Windows needs to reference a file inside the Install.wim folder on the disc for any reason, that copy will fail as the disc it's using is not a physical disc, but a virtual one that the new installation has no knowledge of. The best way to install Windows from an ISO is to copy the ISO to a flash drive or to the local hard disk and run setup that way, or use Rufus to create a bootable USB media for installing. That could be related to your error codes.
Thank you sanshinron for your reply. I always do a clean install for windows, the only reason that i tried to upgrade is that the setup didn't even load when booting from a USB stick (stuck on the windows logo). The USB stick was created using Microsoft's "Windows 7 USB DVD Download Tool". The same stick loads fine on other PCs. I will try to do what you suggested with the USB stick and give it another try.
sanshinron said:
I think you didn't really tried a clean install, since you wrote that you've tried to upgrade later. Clean install means you erase all traces of previous system installation. Also, it's good to delete all partitions. Maybe you're hard disk is MBR formatted and Windows 10 requires GPT (just a suggestion, I'm not sure about that).
Secondly, are you trying an UEFI install? I've had Win10 for a couple of months now but I remember having problems with starting UEFI installation from USB stick. To do this, you have to change partition layout on usb stick to GPT, then make new primary partition, format it to FAT32 and copy all files from install iso to usb stick. Then you can start your install in UEFI mode and I think this will help you. Just remember to delete all partitions and let Windows create new partition layout for you, this way it will create EFI partition.
If the installer says it can't create partitions in UEFI mode, you will have to change partition layout to GPT by yourselft. You can put your hdd in a PC and use a Windows based tool (search google) or maybe some Linux LiveCD will let you do that without removing your hdd.
Click to expand...
Click to collapse
try https://rufus.akeo.ie/ for the usb install
onebyside said:
try https://rufus.akeo.ie/ for the usb install
Click to expand...
Click to collapse
I tried both Rufus and ISO2Disk to make the USB stick GPT, but still i'm having the same issue with the setup not loading.
toulan said:
I tried both Rufus and ISO2Disk to make the USB stick GPT, but still i'm having the same issue with the setup not loading.
Click to expand...
Click to collapse
I installed UEFI without a problem, is there a reason your set on GPT?
I tried everything with the USB drive and it just installs fine on other pcs. I guess this could be because of hardware not supported yet by Microsoft in the current windows 10 builds. I found many people having the same issue. I just hoped there could be a fix to get the installer to start
I encountered same boot-hang problem when clean installing Win 8.1, and Win 10 shouldn't be different. My solutions:
Post-install boot-hang: The hang at logo boot happens when I don't format the install-to partitition with Win 8.1 installer (I normally partition/format using another tool, to skip the redundant WinRE partition that Win creates). Formatting with the installer allows the boot to complete (you can still keep the original partitioning).
Pre-install boot-hang: Some PCs are idiosyncratic with USB boot; likewise, some USB sticks are "different" from others. I found that using DiskPart to partition & format the USB stick (like a HDD) works when Rufus & straight formatting wouldn't. This, admittedly from a small sample set of one particular problematic combo. Simpler is just try to use different USB sticks.
toulan said:
then i get the error 0xC1900101-0x20017
Click to expand...
Click to collapse
This error indicates an update issue.
Try this:
- Ingersoll mini tool partition wizard
- check your disk type
If it's GPT,
- download minitool portable ISO and burn on USB with UUI.
- boot to the application and convert GPT to MBR
- Format the C: partition or wherever the previous windows was installed
- then overwrite it with win10
If it's UEFI change it from the bios. Turn off secure boot and everything.
Try and let me know.
Is there Windows 10 for Nokia Lumia 625?
Tiash420 said:
This error indicates an update issue.
Try this:
- Ingersoll mini tool partition wizard
- check your disk type
If it's GPT,
- download minitool portable ISO and burn on USB with UUI.
- boot to the application and convert GPT to MBR
- Format the C: partition or wherever the previous windows was installed
- then overwrite it with win10
If it's UEFI change it from the bios. Turn off secure boot and everything.
Try and let me know.
Click to expand...
Click to collapse
After using the minitool partition wizard i found out that it was already MBR.
feherneoh said:
Does that pc have Win8.1 installed with UEFI?
If so, connect installer drive, go to shutdown menu, hold shift, press restart
Then select Use device => UEFI USB
Click to expand...
Click to collapse
Tried it, but still the same issue.
Then turn off safe boot and try format the whole disk and start Windows installation from scratch?
Only if you want Windows 10 badly and are ready to sacrifice your data.
Caution: This 'might' work. No guarantees.
Tiash420 said:
Then turn off safe boot and try format the whole disk and start Windows installation from scratch?
Only if you want Windows 10 badly and are ready to sacrifice your data.
Caution: This 'might' work. No guarantees.
Click to expand...
Click to collapse
Tried it, but it didn't work. I think this could be an issue with a hardware that is not supported yet by the preview. I guess i'll have to wait for that to change in next builds.
toulan said:
Tried it, but it didn't work. I think this could be an issue with a hardware that is not supported yet by the preview. I guess i'll have to wait for that to change in next builds.
Click to expand...
Click to collapse
That might be it cause it's a preview and they sure are known for this kinda issue
Tried build 10041 and still same issue.
toulan said:
Tried build 10041 and still same issue.
Click to expand...
Click to collapse
My Laptop is SAMSUNG RV509 but with intel core i3 1st Generation and 2 GB of RAM inside
And I have the same problem with you when trying to install Windows 10 Technical Preview even with it's latest version just like you, get stuck at begin of instalation process, Windows logo appear without any waiting animation (circle of dots), and nothing happen after that.
Just like you, I'm trying install it so many time and so many way such as update latest version of BIOS, but nothing change.
So, if you have a solution for our laptop, please take your time to guide me.
"Sorry if any inconvenience come to your attention with my English writing skill"
shinstar123 said:
My Laptop is SAMSUNG RV509 but with intel core i3 1st Generation and 2 GB of RAM inside
And I have the same problem with you when trying to install Windows 10 Technical Preview even with it's latest version just like you, get stuck at begin of instalation process, Windows logo appear without any waiting animation (circle of dots), and nothing happen after that.
Just like you, I'm trying install it so many time and so many way such as update latest version of BIOS, but nothing change.
So, if you have a solution for our laptop, please take your time to guide me.
"Sorry if any inconvenience come to your attention with my English writing skill"
Click to expand...
Click to collapse
Of course, once i find a solution i will post it here, so far no luck.