Related
i update a spl and mi phone is not power on only orange led like chargin and traball + power blue led can any one HELP and black screen tmobile touch 3g
sometimes pc recognizes for 2 esg
can you boot into recovery or fastboot
sappire.nbh
if you turn phone on holding back button and get fastboot screen then you have hope if it does then put official google sappire.nbh and flash
oshizzle1991 said:
can you boot into recovery or fastboot
Click to expand...
Click to collapse
i plug in pc and it say unknown device and home+power
use adb. see if
it finds the phone.
Try with the volume down and power on. If you can get that then you're ok and recover.
I flashed my radio and my daughter(2) pulled my phone off 1/2 way. Battery popped out and it died.....
I wasn't able to get anything.
If you can get the volume down you can adb flash it.
guys plz help me i might me in lot of troble
becacuse my htc magic taking forever time for rebooting
what i did i will write in steps
1. i did nandroid backup then i rebooted
2. then i apply update from sd card through recovery mode(home+power on) which has more apps than my original update
3.then i rebooted but it was taking very long time for rebooting so i removed battery
4.then i apply nandroid backup then same thing happen as it in step 3
now i am not able to go past vodafone logo screen
i have htc magic from htc brand
Phone____:: Sapphire PVT 32A
SPL______:: 1.33.00010
Radio____:: 3.22.20.17
even though i am still able to go in hboot mode and recovery mode
i am confused how to procedd?is this phone bricked?
so guys what should i do your help is nessary and appriciated
p.s-sorry for bad english
guys plz help me what should i do next?
Just flash a custom ROM, if you can access recovery,and you can, you are not in trouble!
1.Boot into recovery
2.wipe
3.mount usb mass storage
4.copy a custom ROM to the root of your SD card ( lets say cyanogen as most people do)*
5.choose apply any zip and apply the rom that you put
6.reboot
*Using http://forum.xda-developers.com/showthread.php?t=609714&page=1 would be easier for you to flash than cyanogen.
Hope it helps!
thanks for quick reply !!
i will follw mentioned steps thanks!!
but the cyanogen rom will work on my phone as it have perfect spl 1.33.00010?and also it is not rooted
also can u mentioned approx time phone takes to reboot after recovery?
also can u tell me what i did wrong in first time? that will be useful in future to me
thanks
eyegor said:
Just flash a custom ROM, if you can access recovery,and you can, you are not in trouble!
1.Boot into recovery
2.wipe
3.mount usb mass storage
4.copy a custom ROM to the root of your SD card ( lets say cyanogen as most people do)*
5.choose apply any zip and apply the rom that you put
6.reboot
*Using http://forum.xda-developers.com/showthread.php?t=609714&page=1 would be easier for you to flash than cyanogen.
Hope it helps!
Click to expand...
Click to collapse
thanks a lot your procedure just work fine without problem
but can u also tell me that before applying any new update wipe is necessary?i think that was reason to cause problem in first place
anyway thank u very much!!!!!!!!
You're welcome!
After updating your current ROM you don't need to wipe.(sometimes the dev will say that you must wipe, then you will have to do it) However, if you are switching to a different ROM you have to wipe.
And remember to always make a nandroid backup before flashing!
eyegor said:
You're welcome!
After updating your current ROM you don't need to wipe.(sometimes the dev will say that you must wipe, then you will have to do it) However, if you are switching to a different ROM you have to wipe.
And remember to always make a nandroid backup before flashing!
Click to expand...
Click to collapse
again thanks ,it helped me lot!!
I got the same brick problem, i can boot into Hboot and into Fastboot
but when i try to run fastboot commands on the computer it sais "failed (remote: not allow)
can someone tell me where can I find the sapphire.nbh for the HTC Nagic 32A
thks
lunetas said:
I got the same brick problem, i can boot into Hboot and into Fastboot
but when i try to run fastboot commands on the computer it sais "failed (remote: not allow)
can someone tell me where can I find the sapphire.nbh for the HTC Nagic 32A
thks
Click to expand...
Click to collapse
Can you open the recovery from your phone?
no, I can't
stian230 said:
Can you open the recovery from your phone?
Click to expand...
Click to collapse
Make a goldcard.
Use search to find more info about it.
eyegor said:
Make a goldcard.
Use search to find more info about it.
Click to expand...
Click to collapse
from what i learned, to make a gold card the phone has to be able to boot
mine doesn't
lunetas said:
from what i learned, to make a gold card the phone has to be able to boot
mine doesn't
Click to expand...
Click to collapse
You must create goldcard.
If you even flash nbh, you can get message about wrong Customer ID (cause you flash ROM, that isn't to your phone: country-dependent)
Try ask friend or find neighbor with android-phone.
Or find computer with card-reader INSIDE and OS Ubuntu/Linux (usb-card-readers are not compatible, they recognized as disks, not drives)
I created a GoldCArd using a friends phone, i followed the steps carefully
and it sayd "cid incorrect"
any advices/sugestions?
htc magic stuck in htc magic boot screen, it keeps rebooting after playing the htc welcome sound.
it was not rooted before & i have no backup room. fastboot can't recognize the device
C:\SDK_15\tools>fastboot devices
< waiting for device >
all the drivers are installed
is there any chance to recover it?
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
octupusisonfire said:
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
Click to expand...
Click to collapse
If they find out it was due to rooting they will charge you for any repairs. If not, then you are lucky and you get a free repair
chinang said:
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
Click to expand...
Click to collapse
white htc magic mate. so is there a chance to recover it?
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
digitaljeff said:
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
Click to expand...
Click to collapse
yes i can access recovery mode but there's no options in there
in fastboot mode,
Does it appear fastboot USB ?
jgcaap said:
in fastboot mode,
Does it appear fastboot USB ?
Click to expand...
Click to collapse
yes, it appears
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
jgcaap said:
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
Click to expand...
Click to collapse
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
paloma728 said:
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
Click to expand...
Click to collapse
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
jgcaap said:
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
Click to expand...
Click to collapse
i have no warranty mate. i hv done nothing to the phone. concerning experiment im ready ks i hv nothing to lose.
besides, two weeks ago i gave to a gsm-shop for unlock, is there any chance of..........
ok lets try this first without rooting. try to put in fastboot mode and upgrade a ROM from HTC official site same version you are using now. (Not the update from january but november)
the unlock procedure does not affect the phone performance so do not worry. is a complete seperate region in your phone.
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
jgcaap said:
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
Click to expand...
Click to collapse
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
paloma728 said:
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
Click to expand...
Click to collapse
just unroot and restart. get the sap.img and load it
jgcaap said:
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
Click to expand...
Click to collapse
ok mate i will give it a try then post result.
thank you very much
did it work ?
Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
EDIT: This sort of resolved itself, but now I can't get into recovery mode. :/
Rhaseo said:
Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
Click to expand...
Click to collapse
So your flashing the engineering spl for the first time or are you flashing the stock spl back?
Binary100100 said:
So your flashing the engineering spl for the first time or are you flashing the stock spl back?
Click to expand...
Click to collapse
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.
Rhaseo said:
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.
Click to expand...
Click to collapse
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.
Binary100100 said:
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.
Click to expand...
Click to collapse
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.
Rhaseo said:
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.
Click to expand...
Click to collapse
Can you still get into fastboot?
Binary100100 said:
Can you still get into fastboot?
Click to expand...
Click to collapse
Nope. It won't turn on at all.
Rhaseo said:
Nope. It won't turn on at all.
Click to expand...
Click to collapse
Won't boot, no recovery, no fastboot.
If it looks like a brick, if it sounds like a brick then it's probably...
I have a similar problem. I purchased this phone and it just almost works. It boots into fastboot just fine but not recovery. Here are the specifics as they stand now.
Sapphire unknown 32A ship S-on H
CLD 13
Radio 3.22.20.17
May 8 2009, 21:02:32
I made a good gold card...tried the 2010 spl...still hangs during unzip step of the flash process. Any other ROM and I get a main version older error.
Fastboot info version main 2.53.707.2
cid T-MOB010
Any help would be greatly appreciated.
Nice job on probably bricking your phone. You've got the myTouch 1.2 which means you just flashed an incompatible radio. Congratulations!!! I honestly not sure what to tell you. Which sappimg are you trying to use to get the engineering SPL?
Like i said...it was like this when I bought it.
I'm going to try to do a poorman's JTAG...wish me luck.
jonk26.2 said:
wish me luck.
Click to expand...
Click to collapse
Good luck! You can do it!
If you have any questions along the way, please don't hesitate to ask.
JTAG did in fact de-brick my MT3G 1.2 (bought from ebay) the first time I tried it. I made the mistake of flashing the stock ROM, so I would get to the "touch the android to begin" screen and couldn't get any further without a data plan. It wasn't until I probably flashed the wrong sappimg in a root attempt that I started experiencing the stuck at unzipping/FAIL-PU/remote signature verify fail problem...
FYI, I tried flashing radio 2.22.28.25 (the one from the OTA) using JTAG and the radata command, and it fixed my USB. I haven't experiemented much beyond that, but I'm planning to try some more things this weekend.
Moderators, I'd like to suggest merging this thread with http://forum.xda-developers.com/showthread.php?t=773368 and http://forum.xda-developers.com/showthread.php?t=771622 since they all seem to be discussing the same problem.
Hi xda,
I'm sorry if this is a "common" error, but I couldn't find a thread via google or the search function - If I'm just an idiot, SORRY.
The problem is, that my little brothers HTC Magic is failing on boot. The screen keeps on showing the logo for HTC Hero. - Then he tells me that his friend told him that the Hero rom were a better choise, so the friend TRIED to flash the hero rom over at the magic, but now it loops the logo.
My questions is :
1) Is the hero rom a better rom for the Magic?
2) How do I get it to work again?
Is it rooted?
Can you get into recovery?
Can you get into fastboot?
What radio, hboot and recovery are on the phone?
If you or your brother don't know what those things are then you've got some reading to do. Google those words or search in this forum. Once you understand what those things do or if you already know, then report back.
patrickpetersen said:
Hi xda,
I'm sorry if this is a "common" error, but I couldn't find a thread via google or the search function - If I'm just an idiot, SORRY.
The problem is, that my little brothers HTC Magic is failing on boot. The screen keeps on showing the logo for HTC Hero. - Then he tells me that his friend told him that the Hero rom were a better choise, so the friend TRIED to flash the hero rom over at the magic, but now it loops the logo.
My questions is :
1) Is the hero rom a better rom for the Magic?
2) How do I get it to work again?
Click to expand...
Click to collapse
U need to clear about the Hero ROM you flashed. Original Hero ROM can not run in Magic, only Cooked Hero ROM can.
Also, If u flash cooked Hero ROM for Magic, u may need the recovery for this ROM (usually suggested by the dev)
ntphuong said:
U need to clear about the Hero ROM you flashed. Original Hero ROM can not run in Magic, only Cooked Hero ROM can.
Also, If u flash cooked Hero ROM for Magic, u may need the recovery for this ROM (usually suggested by the dev)
Click to expand...
Click to collapse
It wasn't me who did the flash , but my brother classmate and he's suddenly in doubt.. He told he flashed the phone, then made a hard reset and then it started looping. If he can't tell me which Rom he used is there any way to find it?
Sent from my Xperia x10 using Tapatalk
giant_rider said:
Is it rooted?
Can you get into recovery?
Can you get into fastboot?
What radio, hboot and recovery are on the phone?
Click to expand...
Click to collapse
If recovery is pressing BACK+POWER, than yes At that screen it say:
SAPPHIRE PVT 32 A ENG S-OFF H HBOOT-1.33.2010 (SAPP10000) CPLD-12 RADIO-3.22.29.17
When I choose fastboot (HBOOT?) It's trying to load some images, but fails.
Sent from my Xperia x10 using Tapatalk
Recovery is home+power. Try it, if still run, u can download the Magic Rom with 3.22 radio.
If not, Download recovery Magic of RA or Seo,... use fastboot to flash the recovery image.
Or u can download official ROM and flash it.
Good luck
Sent from my Gingerbread on Sapphire using XDA App
The problem is : how do I flash it, when there isn't a propper USB connection? When Im at the recovery screen and Im trying to push the image it says no device to be found.. :/
Sent from my Xperia x10 using Tapatalk
I think u should download the original ROM like sapphire.img, put it into sd card, start the phone in Hboot and it will automatically find the img file to flash.
Sent from my Gingerbread on Sapphire using XDA App
ntphuong said:
I think u should download the original ROM like sapphire.img, put it into sd card, start the phone in Hboot and it will automatically find the img file to flash.
Sent from my Gingerbread on Sapphire using XDA App
Click to expand...
Click to collapse
Where can I find the original ?
Wrong section!
Do NOT post in Development unless you have developed something!
patrickpetersen said:
Where can I find the original ?
Click to expand...
Click to collapse
this is RUU file , u can run it from Windows , just connect your phone to USB.
http://forum.xda-developers.com/showthread.php?t=659403
If u don't have gold card, U need to check your CID b4 download the original ROM.
http://forum.xda-developers.com/showthread.php?t=631519
If u have gold card, u can try any ROM u want.
ntphuong said:
this is RUU file , u can run it from Windows , just connect your phone to USB.
http://forum.xda-developers.com/showthread.php?t=659403
If u don't have gold card, U need to check your CID b4 download the original ROM.
http://forum.xda-developers.com/showthread.php?t=631519
If u have gold card, u can try any ROM u want.
Click to expand...
Click to collapse
The USB connection with his computer isn't working so he won't be able to just run the RUU. He'll need to extract the sappimg file from the RUU, put it on his SD card via an adapter, and flash it from hboot on the phone.
With that being said, @the OP, still grab your CID and let us know which country the phone originates from. Then I'll pull the file you'll need and post it back here for you to download with instructions on how to use it.
DonJuan692006 said:
The USB connection with his computer isn't working so he won't be able to just run the RUU. He'll need to extract the sappimg file from the RUU, put it on his SD card via an adapter, and flash it from hboot on the phone.
With that being said, @the OP, still grab your CID and let us know which country the phone originates from. Then I'll pull the file you'll need and post it back here for you to download with instructions on how to use it.
Click to expand...
Click to collapse
Thanks! - It's bought in Denmark, so I think it's the Nordic rom
patrickpetersen said:
Thanks! - It's bought in Denmark, so I think it's the Nordic rom
Click to expand...
Click to collapse
Wait, just realized that link require that you be able to boot into the ROM. So, we're going to take the plunge. If your wrong, the file just won't flash, so no worries about bricking.
Go here and download that file. Rename it to "sappimg.zip" and put it on your SD card. With the SD card in the phone and the phone turned off, boot into hboot holding (volume down+power). The phone will pick up the image and ask you to hit "ACTION" to continue (ACTION is pressing the trackball in). Press "ACTION" to flash the file, after its done (will take about 5 minutes) it'll ask you to hit "ACTION" again to reboot. Do that and you'll be back stock.
Sent from my LG-P500 using Tapatalk
Hey DonJuan692006
I have the same problem
Can't boot into bastboot
Devices not recognized (USB)
I would like to try your method : French Magic 32B
Well I found a link (96.03 MB)
Put it on SD Card, but didn't work, still frozen with the boot screen
ben00ze said:
Hey DonJuan692006
I have the same problem
Can't boot into bastboot
Devices not recognized but USB
I would like to try your method : French Magic 32B
Click to expand...
Click to collapse
So you can't get into hboot by holding (volume down+power) to boot? If not, can you get into recovery by holding (home+power) to boot?
Nope
I tried :
Down Volume + Power : Frozen on boot logo
Back + Power : same result
Home + Back + Power : same result
TrackBall + Power : black screen with blue led
ben00ze said:
Nope
I tried :
Down Volume + Power : Frozen on boot logo
Back + Power : same result
Home + Back + Power : same result
TrackBall + Power : black screen with blue led
Click to expand...
Click to collapse
Sorry but your phone is bricked.
Sent from my LG-P500 using Tapatalk
So, there is no solution ?
Warranty is now finished ...
I am able to access fast boot on my phone
here is what it says
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009, 22:33:27
Just wanna get back to basic 1.6, any ideas?
Find the thread about unrooting the mt3g 1.2 and follow those directions
Ok. I dont know if this would do me any good but before I semi bricked, I installed Clockwork Recovery and backed up. Maybe that can fix my problem?
MasonGL said:
Ok. I dont know if this would do me any good but before I semi bricked, I installed Clockwork Recovery and backed up. Maybe that can fix my problem?
Click to expand...
Click to collapse
If you can get into recovery then yes
So im able to boot into clockwork recovery,but i Am not able to actually turn the phone on, It just stays on the My Touch start up screen. I did make a backup but my little nephew lost my sd card I used to make the back up. So is their anyway I can just flash my phone back to life on 1.6 by downloading sappimg.zip?
MasonGL said:
So im able to boot into clockwork recovery,but i Am not able to actually turn the phone on, It just stays on the My Touch start up screen. I did make a backup but my little nephew lost my sd card I used to make the back up. So is their anyway I can just flash my phone back to life on 1.6 by downloading sappimg.zip?
Click to expand...
Click to collapse
Flashing the correct sappimg.zip will get your phone back to stock
Could you assist me in finding that correct sappimg.zip ?
MasonGL said:
Could you assist me in finding that correct sappimg.zip ?
Click to expand...
Click to collapse
http://shipped-roms.com/download.ph...ire_T-Mobile_US_2.10.531.4_release_signed.zip
What is your main version?
fastboot getvar version-main
No idea, where would i find that @ hubh98
Thanks tvall, trying it out now, quick question,while using the clockwork recovery, would I need to rename to update.zip or would I just use the install zip from sdcard option?
MasonGL said:
No idea, where would i find that @ hubh98
Thanks tvall, trying it out now, quick question,while using the clockwork recovery, would I need to rename to update.zip or would I just use the install zip from sdcard option?
Click to expand...
Click to collapse
Rename it to sappimg.zip and boot into hboot (volume down + power)
MasonGL said:
No idea, where would i find that @ hubh98
first enter fastboot mode through USB, then type
fastboot getvar version-main
Don't hurry to install the SAPPIMG.zip with eng spl 2010. It can be harmful for some MT3G 1.2. only install eng spl 2005
http://forum.xda-developers.com/showthread.php?t=529019 through recovery. It is a safer choice.
Click to expand...
Click to collapse
To freaken tvall
tvall said:
Rename it to sappimg.zip and boot into hboot (volume down + power)
Click to expand...
Click to collapse
Ummm. Tvall. youre a freaken boss/genius thanks so much
Worked like a charm
MasonGL said:
Ummm. Tvall. youre a freaken boss/genius thanks so much
Worked like a charm
Click to expand...
Click to collapse
You're welcome. Glad to help