Cant root legend - Legend General

So far I have created the goldcard and tried to root using r4-legend root and when I try to install on the downgraded software it comes up with an exclamation mark ! how do I get past this. Someone has done it and directs a link to modaco but it is no longer there. Please help
The custom menu for wiping doesn't come up btw

Try pressing volume up + power button,when exclamation mark appears.
Sent from my Legend using XDA App

qzem said:
Try pressing volume up + power button,when exclamation mark appears.
Sent from my Legend using XDA App
Click to expand...
Click to collapse
Thanks will give this a try.

qzem said:
Try pressing volume up + power button,when exclamation mark appears.
Sent from my Legend using XDA App
Click to expand...
Click to collapse
Worked got onto the next screen thanks only problem now wont install zip from SD card :lol: ARGHHHHHH

Related

[Q] Backing up HTC ARIA ROM

I tried to backup my current rom on my htc aria using Rom Manager. I selected "Backup Current ROM" and it takes me to the green android guy and it starts loading for a half a second and then, and exclamation point starts blinking and i have to take out my battery to reboot my phone.
Can anyone offer me help?
Thanks.
asifryan said:
I tried to backup my current rom on my htc aria using Rom Manager. I selected "Backup Current ROM" and it takes me to the green android guy and it starts loading for a half a second and then, and exclamation point starts blinking and i have to take out my battery to reboot my phone.
Can anyone offer me help?
Thanks.
Click to expand...
Click to collapse
Yea. Don't use rom manager. Boot into clockwork by:
1. If you're using cyanogenmod, press and hole the power button, choose reboot, choose recovery.
2. If you're using anything else turn the phone off, turn it back on whilst holding the volume down button.
Once you're in clockwork, go to nandroid using the volume down button, select it with power button, then select backup with power button.
P.s. don't have your phone plugged into USB during this process.
Sent From My HTC Aria Using XDA App
R u rooted?
Sent from my Liberty using XDA App
No worries... working fine. Thank you all!
Sent from my HTC Liberty using XDA App

Bricked Defy plz help! =(

hey ppl plz help meh here..i have defy red lens & had a custom rom CM10..everything was workin fine until i install an app called - Font Installer *Root*..it caused bootloops..so i flashed JRDNEM_U3_3.4.3-36-1.7.sbf... (yes i know how to flash via rsd lite and did before also..) but this time..my phone keeps restartin even after gettin back to froyo.. plz help meh..
Have you wiped data and caches before flashing the sbf?
can you get to the bootloader or it is fully bricked?
SIDANE99 said:
hey ppl plz help meh here..i have defy red lens & had a custom rom CM10..everything was workin fine until i install an app called - Font Installer *Root*..it caused bootloops..so i flashed JRDNEM_U3_3.4.3-36-1.7.sbf... (yes i know how to flash via rsd lite and did before also..) but this time..my phone keeps restartin even after gettin back to froyo.. plz help meh..
Click to expand...
Click to collapse
hey even i did flashed SBF just now .....i done
wipe data/cache
wipe cache
wipe dalvik
wipe bat stats
and after this flashed froyo 2.2.2 SBF .....
Dont worry!
Go to stock recovery(press and hold power+ vol up till the phone boots to stock recovery)
Then you will see an android with triangle. Press vol up and down simultaneously till menu comes. Wipe data and cache. Reboot.
Ps- even after phone shows bootlogo dont let go of power and vol up buttons.
Sent from my MB526 using xda app-developers app
yes when those bootloops started..meh did wiped cache..and flashed through rsd..now it shows the startin screen.. "touch android icon to start" then before even touchin it..fone restats..
Try what i said. I had same problem.
Sent from my MB526 using xda app-developers app
kadavil said:
Dont worry!
Go to stock recovery(press and hold power+ vol up till the phone boots to stock recovery)
Then you will see an android with triangle. Press vol up and down simultaneously till menu comes. Wipe data and cache. Reboot.
Ps- even after phone shows bootlogo dont let go of power and vol up buttons.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
+1
kadavil said:
Dont worry!
Go to stock recovery(press and hold power+ vol up till the phone boots to stock recovery)
Then you will see an android with triangle. Press vol up and down simultaneously till menu comes. Wipe data and cache. Reboot.
Ps- even after phone shows bootlogo dont let go of power and vol up buttons.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
hey but by holdin power + vol up button..it shows bootloader.. which says battery ok.. connect usb..(its for flashin sbf)
Then try vol down
Sent from my MB526 using xda app-developers app
& stock recovery? how can i get that now..bkoz my fone is already back to froyo..(stock rom) and meh cant install SndInitDefy for recovery..
"Switch phone off, press and hold volume-down button then switch phone on. When the android with the exclamation mark appears, you have to press both volume keys (for more info, check All-in-one Defy beginners guide)" Motorola Defy Wiki
Then press wipe data and cache, and everything should work
Thats why power+vol down. To boot into stocn recovery. Stock roms have stock recovery.
Sent from my MB526 using xda app-developers app
SIDANE99 said:
& stock recovery? how can i get that now..bkoz my fone is already back to froyo..(stock rom) and meh cant install SndInitDefy for recovery..
Click to expand...
Click to collapse
Stock recovery is from Stock ROM. Hence the word Stock in both
Edit: Woah, too many people trying to help one person Oh and wrong forum ofc...should be in General!
UM
SIDANE99 said:
& stock recovery? how can i get that now..bkoz my fone is already back to froyo..(stock rom) and meh cant install SndInitDefy for recovery..
Click to expand...
Click to collapse
>first download stock sbf from here and then download download and open up rsd lite.
>then hold power+volume up and go into bootloader, plug in your phone and install the sbf.
>then when the phone starts up, pull battery out and wait.
>after inserting battery again, hold volume down+power till an android image comes, then press volume buttons up and down.
>wipe data/factory reset!
once its done, reboot.
hope it works!
THIS SHOULD BE IN THE Q/A SECTION. Moderators please do the needful!
FINALLYYY!!!! it worked!! thank you guys..!!! :good:
SIDANE99 said:
FINALLYYY!!!! it worked!! thank you guys..!!! :good:
Click to expand...
Click to collapse
No problem
Sent from my MB526 using xda app-developers app
hey guys plz dont try to install this app from market..i just read..many ppl complained in the comments for brickin thea fone..
https://play.google.com/store/apps/...SwxLDEsImNvbS5qcnVtbXkuZm9udC5pbnN0YWxsZXIiXQ..
SIDANE99 said:
hey guys plz dont try to install this app from market..i just ready..many ppl complained in the comments for brickin thea fone..
https://play.google.com/store/apps/...SwxLDEsImNvbS5qcnVtbXkuZm9udC5pbnN0YWxsZXIiXQ..
Click to expand...
Click to collapse
Not app fault. Worked for me on gingerbread. Maybe ICS issue.
Sent from my MB526 using xda app-developers app
This is dev section.....not bricking guide....go to gen section.....moderator pls delete it....
Sent from my MB526 using xda app-developers app

[Q] stuck on dell xcd35 [zte blade] at dell startup logo

plz help...
i just stuck on dell logo... it is not going further from the logo, i have also tried removing battery for a night, full charged and then restared using Power key+home key+volume down but still result is same. actualy i was using cynogenmod 7 for some time and then yesterday i was trying to install a stock rom using rom manager (i dont remember the stock rom name). after downloading i didnt back up my rom then proceeded. it restarted and stuck on the dell logo from then. i really dont know how to reset it... please help me...
NO112 said:
plz help...
i just stuck on dell logo... it is not going further from the logo, i have also tried removing battery for a night, full charged and then restared using Power key+home key+volume down but still result is same. actualy i was using cynogenmod 7 for some time and then yesterday i was trying to install a stock rom using rom manager (i dont remember the stock rom name). after downloading i didnt back up my rom then proceeded. it restarted and stuck on the dell logo from then. i really dont know how to reset it... please help me...
Click to expand...
Click to collapse
Reboot into recovery by pressing vol- and power button together then wipe data.wipe cache. Wipe dalvic cache. Then flash ROM and gapps
Sent from my Blade using xda app-developers app
did you repartition your internal memory for CM?
It may be possible that your /system is not large enough for your stock ROM.
Flash CM again and see if it works,
(if you are not sure about partition size,in terminal emulator type df -h, and report how much you get for system. for stock you need 200+ MB)
keviv77 said:
Reboot into recovery by pressing vol- and power button together then wipe data.wipe cache. Wipe dalvic cache. Then flash ROM and gapps
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
thanx friend 4 replying....
but its not working... i tried rebooting by pressing vol- and power button together but i cant reach at any options, it only shows me the dell logo and nothing else is happening even if i leave it for at least for an hour... also it doesn't starts with a vibration like before... please friend if u can help by any more suggestions...
NO112 said:
thanx friend 4 replying....
but its not working... i tried rebooting by pressing vol- and power button together but i cant reach at any options, it only shows me the dell logo and nothing else is happening even if i leave it for at least for an hour... also it doesn't starts with a vibration like before... please friend if u can help by any more suggestions...
Click to expand...
Click to collapse
Have u installed cwm. Its looks partition issue. Download tpt helper from play store. There's a guide in android development section something like "noob proof guide for tpt" read it
NOTE: press thanks if I helped
Sent from my Blade using xda app-developers app
keviv77 said:
Have u installed cwm. Its looks partition issue. Download tpt helper from play store. There's a guide in android development section something like "noob proof guide for tpt" read it
NOTE: press thanks if I helped
Sent from my Blade using xda app-developers app
Click to expand...
Click to collapse
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
NO112 said:
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
Click to expand...
Click to collapse
There's a thread on modaco on unbricking blade.find that.
Sent from my Blade using xda app-developers app
NO112 said:
thanx friend...
yes i had installed cwm. i had updated my cell from froyo to cynogenmod 7 about 2 or 3 months ago using rom manager and cwm. and this time i was trying to try something different rom and its very hard to remember what went wrong.
also as u suggested i tried download tpt helper but i couldn't find a way to install tpt helper from play store. my phone is not going further from the dell logo, once i press the power button the dell logo appears on the screen and remains that way no matter how long i leave it to process further. dead end. i think its the situation that should be called "bricked"...:crying:
Click to expand...
Click to collapse
Did you try powering on with volume down pressed?
QuantumFoam aka Faiz | Asus TF300T - ZTE Blade | gigatechworld.com
didn't work
yes i tried powering on pressing volume minus key, but it didn't work at all...:crying:
NO112 said:
yes i tried powering on pressing volume minus key, but it didn't work at all...:crying:
Click to expand...
Click to collapse
Take out battery n put it again. Then try by pressing vol- and power button. If nothing happens then u can download tpt from desktop and copy image file to sdcard. Then flash it by pressing vol+ and menu and power button together
Sent from my Blade using xda app-developers app
i tried replacing the battery then powering on pressing vol- and power button but still nothing is happening... please give the link to download tpt...
NO112 said:
i tried replacing the battery then powering on pressing vol- and power button but still nothing is happening... please give the link to download tpt...
Click to expand...
Click to collapse
Google it. U WL find it on modaco
Sent from my Blade using xda app-developers app

[HELP THREAD] Nexus 4 with 4.3.3 "no command"

Hi to all
I updated my nexus 4.2.2 to 4.3.3 through the ota.
Now i tried to unlock&root with the nexus 4 toolkit(last version 1.6.8)
Never mind what i'm trying to do, when the device trying to get into recovery there is a lying android red icon with: "no command"
I believe this is a soft brick , but the device is working and the android is boot up normally,
I allso tried to press power key and after he was pressed i conitnue to hold him and press volume up, the only thing that happend is
a red light and no recovery menu, i tried every way to use the tool but the recovery isn't back!
Please help me guys!
You are in the future or what?
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 05:03 PM ---------- Previous post was at 05:03 PM ----------
Thibaultvw said:
You are in the future or what?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
And it is stock recovery.
Sent from my Nexus 4 using xda app-developers app
You mean't Android 4.3 and the recovery does this for security.
To access the recovery you have to press volume up and power until it unlocks the menu.
Sent from my Nexus 4 using Tapatalk 4
You didn't read my thread!!!
andyabc said:
You mean't Android 4.3 and the recovery does this for security.
To access the recovery you have to press volume up and power until it unlocks the menu.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
I did press power key and when it's hold I pressed the volume up - it did nothing!
eyalabush said:
I did press power key and when it's hold I pressed the volume up - it did nothing!
Click to expand...
Click to collapse
You have to keep pressing it and holding it until it unlocks.
Mine and the others unlocks fine so yours should work.
Sent from my Nexus 4 using Tapatalk 4
For how long?!
andyabc said:
You have to keep pressing it and holding it until it unlocks.
Mine and the others unlocks fine so yours should work.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
For how long should i press?
I tried 10 times at least, and the result: red light...
eyalabush said:
For how long should i press?
I tried 10 times at least, and the result: red light...
Click to expand...
Click to collapse
Wait, a red light?
Are you on low battery?
Maybe it is either a low battery command, access denied to to too many attempts or incorrect combination.
Try doing the same to the up and down keys followed by the power.
Sent from my Nexus 4 using Tapatalk 4
Battery are full
The battery are full,
I tried doing all the combination , my recovery is dead!!!
any ideas?
eyalabush said:
The battery are full,
I tried doing all the combination , my recovery is dead!!!
any ideas?
Click to expand...
Click to collapse
Pressing the volume up and power key in the same time continuously?
And no I do not mean hold.
Sent from my Nexus 4 using Tapatalk 4
I also have the exact same issue. I never tried entering stock recovery before now and I tried to do it now, after updating OTA to 4.3 and rooting with wugfresh toolkit, 1.6.8. Regardless of how many times I have tried, it just reboots normally and can't access the stock recovery.
aaatoel said:
I also have the exact same issue. I never tried entering stock recovery before now and I tried to do it now, after updating OTA to 4.3 and rooting with wugfresh toolkit, 1.6.8. Regardless of how many times I have tried, it just reboots normally and can't access the stock recovery.
Click to expand...
Click to collapse
So you cannot access the recovery using the bootloader?, if so then it is probably corrupted.
I have the stock recovery image file here which you can flash via Fastboot.
Sent from my Nexus 4 using Tapatalk 4
I imagined the same. The toolkit itself, is giving you the option of reflashing the stock recovery, I think that I will try this at first. The weird thing is that the phone boots up normally, works as it should and is rooted successfully.
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Just looked this up for a customer at my shop and works like a champ. Thank you
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
Excellent. Thanks for that. It was doing my head in.
The question is though will OTA updates still work? And the answer is yes. I flashed back to 4.2.2 and the 4.3 update came through OK. Happy days as I may well pass my N4 on soon and it needs to work 100% for a non tech wife.
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
Thank you, i was going crazy

Motorola MB525 loonly ????

Hi all, i have problem Wtih Motorola MB525 bricked . be for work well version 2.2.2, but ​confusion flashing MB526 firmware version 2.3.6 work with my Mb525 but problem Camera . and i try flashing old MB525 firmwares but no luck after flashing dead only light blang lcd. and i try flashing MB526 firmwares after flashing logo only ??????? hell me
how solution back to MB525 .
firmwares name :
MB525 : JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTHKTW_P013_A010_HWp3_Service1FF
MB526 : DEFYPLUS_U3_4.5.1-134_DFP-231_VFBLUR_SIGN_USADEFYEMARAB1B8VFFR004.0R_PDS03C_USAJRDNGIBRVFFR_P029_A029_M004_Service1FF
Thank u first
Now you cannot go back to anything lower than 2.3.6. Flash any 2ndboot ROM like MS2Ginger, CM10.x or Walter's CM9 build.
Sent from my MB526 using xda app-developers app
ok thank for reply , now my phone logo only and how solution ??
Thank
Flash defy+ sbf
Sent from my MB526 using xda app-developers app
I think you have a defy mb525 with green ". lens "
Read this http://forum.xda-developers.com/showthread.php?t=1216982
I think you will see that you have to flash the sometging like defy bl.7 rooted sbf and you can go on with custom roms or can go a way that walter instruced us to go like downgrade from gingerbreed ti froyo.....
Have fun by bringing your defy back to live
And as someone said ...:
It is nearly impossible to break our loved defy....
All ways remember.. read befor q
And do the mc.giver if you have battery low cannot programm
Cheers
Sent from my MB526 using xda app-developers app
hotdog125 said:
Flash defy+ sbf
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
i try flashing with mb526 firmwares but still logo only ???
help me
samnang ouch said:
i try flashing with mb526 firmwares but still logo only ???
help me
Click to expand...
Click to collapse
Clear data and cache through stock recovery.
hotdog125 said:
Clear data and cache through stock recovery.
Click to expand...
Click to collapse
How to clear data ???????? because phone can't recovery ???
samnang ouch said:
How to clear data ???????? because phone can't recovery ???
Click to expand...
Click to collapse
Switch off the phone. Then press volume down button and then power button. Then a black screen with exclamation mark will appear. Press both volume down and volume up button. In the menu which appears select wipe data/factory reset option (volume button to select options, power button to select). Then reboot.
hotdog125 said:
Switch off the phone. Then press volume down button and then power button. Then a black screen with exclamation mark will appear. Press both volume down and volume up button. In the menu which appears select wipe data/factory reset option (volume button to select options, power button to select). Then reboot.
Click to expand...
Click to collapse
yes i press and hold power + volume down but still logo only ???? can't recovery .
help me ????
samnang ouch said:
yes i press and hold power + volume down but still logo only ???? can't recovery .
help me ????
Click to expand...
Click to collapse
Switch off your phone. Take out your battery and wait for 5 minutes. When you put the battery back in the phone the logo should not come. Then first press volume down the power button (keep holding them both till a black screen with ! mark comes).
hotdog125 said:
Switch off your phone. Take out your battery and wait for 5 minutes. When you put the battery back in the phone the logo should not come. Then first press volume down the power button (keep holding them both till a black screen with ! mark comes).
Click to expand...
Click to collapse
still same ?????????? help
samnang ouch said:
still same ?????????? help
Click to expand...
Click to collapse
See this - http://forum.xda-developers.com/showthread.php?t=1889325

Categories

Resources