Related
Hey All,
On 2.2 now and they changed the USB mass storage interface a little.
When I plug the phone in, it connects fine. I can put files on the SD card etc.
If I click the "Turn off" button to turn off USB storage on the phone, it crashes the phone (just freezes up and sits there, the progress indicator won't even spin).
I have tried unmounting the phone in windows too first of course and it won't help. Just unplugging the cable seems to work but then it thinks its still connected.
Anyone have any ideas? This definitely was fine pre-2.2
I get the same. First time I've had to do a pull the battery restart on the N1 :/
Yes pulling the battery is the only way to restore the phone i've tried it a dozen times and it seems to be a serious problem.
I think this started after applying the CM root mods... I am using the kernel .34 version and I am having the same issue. I was running without this mod for a while and didn't have this issue, so either it's related to the root mod or it's some weird issue that doesn't show itself until something else happens.
joshuapurcell said:
I think this started after applying the CM root mods... I am using the kernel .34 version and I am having the same issue. I was running without this mod for a while and didn't have this issue, so either it's related to the root mod or it's some weird issue that doesn't show itself until something else happens.
Click to expand...
Click to collapse
I also have the .34 kernel from CM for root.
It's definitely the CM root mod.
Yeah its been confirmed on that thread. Known issue I guess.
This thread needs a bump!
this is a well known issue with .34 kernals
just apply CM's root mod stock kernal, and it will work fine
all .34 kernals have this problem and im sure lots of people are looking into it.
Yes there is a workaround if its really bugging you, revert to an earlier 33 or stock kernel (I did).
3rd thread, about 4th rom flashed
constant issues with builds. have gone from stock to:
cm 6.1.3 -apps crashing, random crash notices i.e "phone book has crashed force close" - "the process com.android.phone has stopped unexpectedly"
cm 7 - random reboots, opening browser caused power cycle, wifi issues, lag (thread posted, no solutions at the forefront)
currently on tripnraver pre release. now another issue. no signal what so ever.
original baseband on this xperia x10a is .55. it is suggested to use with bands 52 or 49.
loading either of these basebands. which ive done. doesn't seem to fix the no signal problem. the description states should be backwards compatible even if appropriate bb is not installed on device. yet no luck.
attempting to flash either baseband fails to resolve this problem. currently trying to flash back to stock and try another full reinstall and baseband flash in flashtool.
any ideas would be a great help. having to flash x number of times between roms is getting quite time consuming
thanks everyone.
if you want to stay on the miui rom, you can flash the baseband patch located here and stay on whatever baseband works best for you (I'm on .55 and find it fantastic), then when you load the rom, go to dev tools>bad behaviour>crash the system server.
http://forum.xda-developers.com/showthread.php?t=1011608
Otherwise, I would recommend wolfbreaks cm 6.1.3, as it is the most stable. You must have done something wrong during installation as I never had an issue with his roms.
The only issue I have ever had with any rom is MiUi and thats because I used the wrong baseband. You must be doing something wrong for you to be having problems
if you want, try this flash, it's trips miui pre-final with the baseband patch implemented.
http://www.multiupload.com/KCKE9K2WKN
worked with my .54 baseband
thanks so much for the links to the baseband patches. i remember coming across a thread that posted it but unfortunately forgot to book mark. so im definitely going to go ahead and try with the patch installed. hopefully all works well
each rom ive flashed has been done properly according to instructions. cache wiped, dalvik, and full reset as per menu options in xrecovery.
one way or another i experienced lag for the most part, and as mentioned some random crashes. never had reset on wolfs rom just error messages at times. trips rom worked excellent, smooth and quick. hopefully with the patch implemented everything will work flawlessly
thanks you guys
*Updated
Flashed over rom with baseband patch. signal working. everything running smooth.
except for when using camera zoom. zoom default displays 0x. as soon as the option is selected it spawns an immediate force close
any patches? or similar outcome for anyone else?
i will outline my steps below so everyones up to speed on how i performed this flash.
- flashed back stock in SEUS
- root with one click (success)
- installed busy box (market)
- installed xrecovery apk
- booted into xrec
1. full factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
5. install custom zip from sd card
6. selected trips rom with bb patch implemented
5. reboot
Camera zoom doesn't work in most ROMs yet and the lag you were experiencing was likely just the FW "settling" it can take a little bit and a couple reboots sometimes for the phone to calibrate itself properly.
Sent from my X10i using XDA Premium App
thanks cmoney. maybe ill try my luck with cm7. give it a few reboots and hope for the best. great rom. im really loving trips iphonesque style
clean smooth and quick. everythings working great. hoping the zoom may get fixed soon enough. only other inquiry i have with regards to this rom is the apps2sd.
this feature is essential to myself personally. and it is not working as ive noticed on this rom. ive read a thread with regards to a fix for the last release. i checked the settings for an enable option in case the feature requires being manually set as active but nothing listed. within sd settings state reads as unavailable. if anyone has an answer as to whether this fix will function with the current pre release. ill be going ahead with completeling the flash and reporting what i find back on this thread.
thanks again everyone
Try Wolfbreaks rom. It's very very stable for me. It has cam and everything upto date.
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
thesoundofsilence said:
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
Click to expand...
Click to collapse
works for me on trips newest....
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
thesoundofsilence said:
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
Click to expand...
Click to collapse
I dunno man, it works fine for me, but I copied data from my 0.3.2 xrecovery image, so that might be why. try flashing that apps2sd fix for 0.3.2, should work fine
damn it. i just found that thread. found the links to the fixes. so far ive tried miui32_a2sd_fix.zip. and flashed that over with xrec prior to reboot. which did nothing.
there are two more links so im going to try those two flashes as well and hope that one of them will do the trick. if its working when utilizing .32 patches then ideally the bloody thing would have to work here. thanks for the input though dtox. much appreciated
I don't know what else to suggest man
From the feedback I see in the miui thread, everyone else is reporting it working!
Did you factory wipe, wipe cache partition, and wipe dalvik cache before install? then flash the miui 1.0.zip, and flash immediately the baseband patch then reboot into the rom.
Remember not all apps allow apps2sd so use something like android system info, go into the applications tab click on one, click manage and then see if the option "move to sd" is highlighted. Like I said check a few though, not all apps can be moved
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
thesoundofsilence said:
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
Click to expand...
Click to collapse
Try it again but without the fix...
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
thesoundofsilence said:
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
Click to expand...
Click to collapse
No idea man, like I said it is fine for everyone else so I'm so no big development will arise that will make it function with your phone....
maybe it has something to do with 10a. i dont know. but the point is it shouldn't even be doing this regardless. hypothetically if its froyo and it has apps2sd built in. it should work. its not the way ive flashed. the phone supports it. so my only conclusion the rom must not be as compatible as stated. and from reading different posts about the prev builds sometimes the patches worked at other times they didnt. and also the fact that the rom is claimed to work without the need for a bbpatch. yet without the patch instaled phone caught no single. i guess certain unexplainable glitches can be bound to happen at times but any how ill give it one last go.
if nothing comes out of that then im giving up on that build because it seems relatively hopeless.
lol I'm using an x10a...
Still man you're the only person reporting this. Don't you find that strange? What baseband are you using anyhow?
This is my journey from Eclair to Froyo - read only if you have ample time. You have been warned !
I had never tried even rooting my Galaxy I5801 so I was a bit hesitant to upgrade my DDJG6 Eclair to DDJP2 FROYO even via Kies. After some days of the official release I finally plugged my phone to update. But alas, Kies constantly showed "operation timed out" (poor connectivity ?) and I was left with no other choice but Odin
DAY 1:
Downloaded the flashing package and the relevant firmware, connected and fired up Odin as per the tutorial. Loaded the packages and started the process with a prayer on my lips. The first boot nearly gave me a panic attack but the tutorial did calm me down and voila ! I had successfully flashed Froyo. Thereafter I also loaded my backed up contacts & memo data through Kies sync.
DAY 2:
I was happy with my effort and started explorin the possibilities of FROYO including app2sd. All fine until I decided to install a flashlite plugin later that day. The system starting freezin so I rebooted. The problem recurred and I again rebooted. This my boot screen got stuck on the "GTI5801 - Samsung" screen. I knew I was screwed but since I could access download / recovery mode (even though wipe data or cache didnt work) I knew it was only a "soft brick"
Day 3:
Geared up to reflash my phone through Odin. This time I took some unusual steps - removed bootloader & sbl and extracted dats.rfs from DDJG6 & added it to DDJP2 tar package. Flashing was succesful and I had started to sort of like the entire process.
Day 4:
Was disappointed with the improper implementation of swype so I decided to install swype beta. Root, delete, register and install - simple ? That's what everybody says.... Downloaded superoneclick, enabled USB debugging and rooted (Z4root didnt work). Now the delete process was tricky. Couldnt make sense of titanium backup so tried another method. Since root explored is paid app and terminal emulator is beyond my scope, installed super manager from market. Gave superuser permission and started deleting relevant swype files - I think it was 2 from /system/app, 1 from /system/lib and 1 from /data/data. Registered for swype beta and downloaded it as advised on the website. I write this post with swype beta.
Everything is working fine now - almost !
PROS - learnt flashing, knew the benefits of rooting, now can manage my apps and memory a bit better
CONS - My music player is screwed. For that matter, any music player I have downloaded and tried is having the same problem. The player doesnt play some music files, skips it or even if forced to play remains mute although the music play status bar moves. I checked the file properties and played them on PC. They are either Mp3 or M4a. Do I need to reinstall the music player coz it sounds like its become corrupted ? But then it plays some tracks flawlessly
I am in debt to XDA Galaxy 3 forum members and rudolf in particular for helping me out at crucial junctures. Now if only I could solve this problem !
jg6 is an eclair rom right? That could be causing problems, mizing eclair and froyo.
Did you do a factory reset after flashing (I suspect you did if you followed a tutorial).
Also, removing boot and spl is not unusal, it is HIGHLY RECOMMENDED, always do it! (this is mostly for other people reading this thread)
Nice story... Waiting for day 5+
@stubborn - yup, i did a reset but the music player problem persists. I included the data.rfs file from eclair to froyo coz I was somehow convinced that its absence in the DDJP2 had causes my system to freeze the first time
@kyrillos - Day 5+ testing isnt exactly detailed. The only thing I noticed is that the battery drain was more than DDJG6 eclair or maybe its the battery bug acting whimsically (as it usually does). Havn't modified or tested the GPS so no comments. Installed Gingerbread keyboard but not exactly to my taste. Still using a combo of swype and regular tap.
BTW - ur ROMS are damn good judging by the features, performance feedbacks and screenshots. However, It will take me another leap of faith to flash one of those since the complexity involved is beyond my current level of expertise (or rather the lack of it !)
Any ideas / tutorials on deleting the stock music player app and reinstalling it (with apk files, if possible) ?
This doesn't belong here, but my lack of writing stuff prevents me from posting this where it is supposed to be
If possible, move this post into this thread: http://forum.xda-developers.com/showthread.php?t=1115958
So. JV5/JV9/JVO builds from kitchen with CF and HC kernels cause soft-reboots on my SGS I9000. I tested all of them by now. Tried the Talon Kernel 0.2.1 with JV5 and JV9, which caused boot-looping.
So I kept reading and found out that I was not the only one having this problem, but it seemed to be solveable by flashing a stock JVO first.
I already had Gingerbread Bootloaders, flashed JVK a while back, so I tried a few no-wipe ROMs as I mentioned above. All with the same problem. I lost connection to my cell network and it didn't come back. Somehow connected to the WiFi, I suppose. I could reproduce it by getting a GPS fix. But that was more or less related to my phone using wireless networks for positioning, which means that it switches on WiFi for just a second but without telling me.
Anyways, I thought I might have been wrong about the bootloaders being the reason to flash the stock firmware, so I did as it said: it specifically said JVO+ in the tutorial, so I went through the hassle and did the following:
- Flash an entire JVO firmware
- Reboot
(that one took a while)
- Full factory reset via dialer code
(that one took a while, too)
- reboot again, this time into bootloader, to flash a hc-speedmod kernel, to have root access and CWM
- reboot again, into CWM, to flash one of the ROMs I tried earlier
I ran back into my old trouble. So this is not an issue of the GB bootloaders or a previously installed version. The phone keeps soft-rebooting.
I re-installed the stock JVO firmware and flashed the speedmod kernel again, rooted via CWM menu and now I am just recovering my important applications via Titanium. Nothing bad happened yet, and it would have, with any of the kitchen ROMs Trust my, I almost tried them all
Nobody else wrote anything on that, so I thought I'd let you know there's no need to wipe all your data (like I did) and hope for the soft-reboots to be gone.
There's something seriously wrong there.
Anybody else having the same issues?
Cheers.
Andreas
Yep, I had a whole lot of trouble with the Kitchen JV5 release yesterday, ended up giving up and goind back to Darky's 10.1. Mine would boot, and when doing a media scan, would soft reset itself. I could get it to work eventually by powering down before media scanner completed then powering up. Bit odd - tried three builds of JV5 with different kernels but they ended up all being screwy. Ah well, will see what JVP brings...
glad to hear that I'm not the only one crazy enough to wipe his entire phone for a new (and fast) operating system.
Anyways... I am now back to my old status. Re-installed most of my apps, sync behavior, BT devices, wireless APs, etc. blayallah...
JVO with a hc speedmod kernel is by far the best and fastest ROM I have run so far.
Kitchen builds are dead to me until some of the people who ran into the same problems as I did confirm that those issues have been dealt with.
Just for your information:
- battery life seems amazing, at least regarding to the sensor. Hope it's any accurate. Had it unplugged over night and lost 22% battery life with WiFi on in a bit more than 10 hours
- it responds VERY fast, compared to any other ROM I had before
- bluetooth devices have to be set up again, for some reason my phone doesn't like my headset any longer. I can hear people talk but they can't hear me. However, the microphone does work when I use my headset for text2speech. Weird.
Anything else seems just the way it was before. Just faster.
I'd be glad to hear if someone could still help me out with the soft-reboots, if somebody else decides to use the kitchen builds either way I won't until somebody else tells me it's working now
Andreas
Why would u need to SOFT reboot ?
I don't *need* to soft-reboot. It just does that. Modem crashes, lost network connection. The phone doesn't actually entirely crash, it just restarts the network service and your phone is going to be offline.
That's a soft-reboot. No entire system crash or kernel panic, just the modem crashing.
That does happen when things are messed up
I'm having the same issue: on a JV5 and JV9 RomKitchen build with a JVO modem, as soon as I get a GPS lock, the phone soft-reboots.
paour said:
I'm having the same issue: on a JV5 and JV9 RomKitchen build with a JVO modem, as soon as I get a GPS lock, the phone soft-reboots.
Click to expand...
Click to collapse
guys, why dont you try the JVP v7 builds, its much better.
also, please select the default boot animation, else it will go into bootloop.
I can confirms that doing a no-wipe upgrade to JVP v7 fixed this soft-reboot issue.
Thank you for that information. I'm not in a flashing mood right now JVO is running just fine right now. Anything about JVP v7 that's worth the try?
JVO is running fine for now. So I'm not feeling like flashing everything over again.
Is there a simple way to just dump my current phone status, its ROM and everything somewhere to my harddrive and re-flash all of that over in case anything goes wrong?
andreas1979 said:
Thank you for that information. I'm not in a flashing mood right now JVO is running just fine right now. Anything about JVP v7 that's worth the try?
JVO is running fine for now. So I'm not feeling like flashing everything over again.
Is there a simple way to just dump my current phone status, its ROM and everything somewhere to my harddrive and re-flash all of that over in case anything goes wrong?
Click to expand...
Click to collapse
its pretty much the same stuff except very good speed optimizations, 2.3.4, and few UI tweaks.
its been the same since the first gingerbread leaks. we flash it for new builds dont we
...and now it's just pissing me off. JV9 Kitchen Build. On GPS Lock I get soft reboots. What the hell?!
Trying another one now... crap. I thought That would be fixed by now.
So. Kept me busy, just to be sure: Each and every combination I tried using 2.3.3 from the kitchen caused soft-reboots on GPS fix. The phone was very fast with the Talon Kernel and Ext4 FS, but I can't live without GPS
So I tried a non-wipe install over one of the not working 2.3.3 roms.
I'm on JVP now, not as fast as Talon, so it seems, but GPS works, getting a fix at my window within 5-10 seconds, no crashes whatsoever.
So. If anybody else experiences crashes like the ones I mentioned in the opening post, I can also confirm that the JVP ROMs seem to fix the problem.
Andreas
...as much as I hate talking to myself, it's still regarding the same issue, so I have to ask:
Saw the new kitchen build (JVR).
Two questions:
1. Is the soft-reboot issue finally fixed?
2. Is there a little language-switcher-button on the bottom left of the swype keyboard?
I use the JVO swype, and it has that button, and the new ones don't seem to have it any more? It's really nice if you need to switch between two languages all the time and you don't want to go into settings every time you need to switch.
Anyone know that? http://t1.gstatic.com/images?q=tbn:ANd9GcQC6orm5ZMAju2VzczB3MCbwEPeSH9yrYI6wxfdDGFCvkdpe7lQRg <- that one right here has it. Took me a long time to find that, because no swype version but JVO seems to have that feature.
I'd be glad about any answers to those two questions.
Andreas
andreas1979 said:
...as much as I hate talking to myself, it's still regarding the same issue, so I have to ask:
Saw the new kitchen build (JVR).
Two questions:
1. Is the soft-reboot issue finally fixed?
2. Is there a little language-switcher-button on the bottom left of the swype keyboard?
I use the JVO swype, and it has that button, and the new ones don't seem to have it any more? It's really nice if you need to switch between two languages all the time and you don't want to go into settings every time you need to switch.
Anyone know that? http://t1.gstatic.com/images?q=tbn:ANd9GcQC6orm5ZMAju2VzczB3MCbwEPeSH9yrYI6wxfdDGFCvkdpe7lQRg <- that one right here has it. Took me a long time to find that, because no swype version but JVO seems to have that feature.
I'd be glad about any answers to those two questions.
Andreas
Click to expand...
Click to collapse
I have tried the JVR base available in the kitchen---nothing to write home about,went back to STOCK--far better!I imagine the Kitchen as we used to know and use way back is now a thing of the past and the last nail was Tricky also leaving...
andreas1979 said:
glad to hear that I'm not the only one crazy enough to wipe his entire phone for a new (and fast) operating system.
Andreas
Click to expand...
Click to collapse
Guess that makes me crazy too
I've also been tinkering with customising ROM's myself to get to the boot-loop - getting pretty proficient at it now (guess I should read up a little more first)
Hi everyone, I'll try to keep this as concise and clear as possible. Thanks in advanced for reading this.
Phone: SGS4
Running: Android 4.3
Carrier: Bell Canada
Rooted: No
Rom: Stock TouchWiz.
Problem: The phone will not turn on WiFi or Bluetooth. If you attempt to switch either on, it remains a dim green for a few seconds and then turns back off shortly after.
Solutions tried:
(a) Battery pull.
- Unsuccessful. (At first, if battery pulled during Samsung logo animation after restarting from ON state, both WiFi/Bluetooth would turn on again, sometimes for minutes, sometimes hours. Eventually, this stopped working. It would only work on a restart pulling the battery during the animation, never at any other time)
(b) Update to latest firmware through Samsung Kies.
- Unsuccessful.
(c) Boot into safe mode to see if any applications were the cause.
- Unsuccessful.
(d) Wipe device clean and start fresh.
- Unsuccessful.
(e) Change WiFi power saving state to off through *#0011# menu.
- Unsuccessful.
I have not tried loading other roms or kernels.
A quick google search shows that many people have the same problem, I have yet to find a working solution. If anyone here can point me in the right direction, I'm willing to pay at this point. I cannot return it to Samsung as there is a crack on the screen which has voided the warranty. I could fix the screen and try sending it in but I'm hoping for a software solution.
I feel as if it is not a hardware issue as the battery pulls worked initially.
Any input would be greatly appreciated. Once again, I'm willing to pay for a working solution, the number is up to you as long as it is reasonable.
Wexberg said:
Hi everyone, I'll try to keep this as concise and clear as possible. Thanks in advanced for reading this.
Phone: SGS4
Running: Android 4.3
Carrier: Bell Canada
Rooted: No
Rom: Stock TouchWiz.
Problem: The phone will not turn on WiFi or Bluetooth. If you attempt to switch either on, it remains a dim green for a few seconds and then turns back off shortly after.
Solutions tried:
(a) Battery pull.
- Unsuccessful. (At first, if battery pulled during Samsung logo animation after restarting from ON state, both WiFi/Bluetooth would turn on again, sometimes for minutes, sometimes hours. Eventually, this stopped working. It would only work on a restart pulling the battery during the animation, never at any other time)
(b) Update to latest firmware through Samsung Kies.
- Unsuccessful.
(c) Boot into safe mode to see if any applications were the cause.
- Unsuccessful.
(d) Wipe device clean and start fresh.
- Unsuccessful.
(e) Change WiFi power saving state to off through *#0011# menu.
- Unsuccessful.
I have not tried loading other roms or kernels.
A quick google search shows that many people have the same problem, I have yet to find a working solution. If anyone here can point me in the right direction, I'm willing to pay at this point. I cannot return it to Samsung as there is a crack on the screen which has voided the warranty. I could fix the screen and try sending it in but I'm hoping for a software solution.
I feel as if it is not a hardware issue as the battery pulls worked initially.
Any input would be greatly appreciated. Once again, I'm willing to pay for a working solution, the number is up to you as long as it is reasonable.
Click to expand...
Click to collapse
When you say wipe device clean, how did you do that? Did you use ODIN and flash the firmware or just do a factory reset?
DeadlySin9 said:
When you say wipe device clean, how did you do that? Did you use ODIN and flash the firmware or just do a factory reset?
Click to expand...
Click to collapse
I did not use ODIN, I did a simple factory reset. I will try that ASAP and post an update. If there any other solutions as well, I would really appreciate them in case that does not do the trick.
Thank you for your response DeadlySin, it is greatly appreciated.
Wexberg said:
I did not use ODIN, I did a simple factory reset. I will try that ASAP and post an update. If there any other solutions as well, I would really appreciate them in case that does not do the trick.
Thank you for your response DeadlySin, it is greatly appreciated.
Click to expand...
Click to collapse
Just try that first, as doing a factory reset does not actually change the system files but rather wipes all userdata. Just use the file for whatever firmware you have in the I337m firmwares thread.
DeadlySin9,
I finally got around to using odin to reset the firmware, first to stock 4.3 from my carrier, then 4.2, both of which still failed to change the state of the problem. At this point, it seems like an obvious hardware problem but if that was true, I still can't understand why I could re-initiate WiFi/Bluetooth after a specific pattern of battery pulls (this does not work anymore but worked for awhile, stopped, then started again, now finally stopped). Any last ideas? I really appreciate your help.
DeadlySin9 said:
Just try that first, as doing a factory reset does not actually change the system files but rather wipes all userdata. Just use the file for whatever firmware you have in the I337m firmwares thread.
Click to expand...
Click to collapse
Wexberg said:
DeadlySin9,
I finally got around to using odin to reset the firmware, first to stock 4.3 from my carrier, then 4.2, both of which still failed to change the state of the problem. At this point, it seems like an obvious hardware problem but if that was true, I still can't understand why I could re-initiate WiFi/Bluetooth after a specific pattern of battery pulls (this does not work anymore but worked for awhile, stopped, then started again, now finally stopped). Any last ideas? I really appreciate your help.
Click to expand...
Click to collapse
I don't know why that would work. At this point I'm not sure what else you could do. I know I used to have WiFi issues after some flashes with my Inspire but i never really had a fix even then.
i had issues enabling wifi after installing a custom kernel & with certain roms (same 1/2 lit green toggle crap, sometimes it would toggle back off sometimes it would just stay 1/2 lit and make my phone burn)
my solution has been 100% working for myself so far, if you'd like to try it here's the directions
1. install es file explorer
2. set root permissions AND mount as writable, within es file explorer
3. use es file explorer to navigate to the root of your phone (system directory, i think) and open the build.prop file than select the es file editor
4. find the line that says ro.securestorage.support=true and edit it to false, save and close
5. reboot phone, and hopfully you have no more wifi issues
i was skeptical when i first did this because nothing worked to fix my wifi, but this works 100% for me on every rom
Been there, done that.
It's not a hardware problem. It is, I believe, problems with the restrictive 4.3 update not playing nicely with some system settings. In short your system drivers or configuration settings are getting messed up to to bugs in how Knox and the bootloader are interacting with the modem.
I had your exact symptoms after installing certain custom ROMs, also noted that the problem could be temporarily "fixed" if the boot process was interrupted or by specific sequences of modem changes. The situation is not helped by Bell being more restrictive than other Canadian carriers e.g. Rogers, something that also caused me problems when I was enabling AWS on a Bell firmware.
The effective solution was to install a custom recovery to facilitate a complete wipe of files, then flash a Rogers stock image. Cured. And continuing to work properly if subsequently returned to a Bell stock image. Although, frankly you'd have a more stable and flexible platform if you you kept the Rogers image in the end. If the build properties edit doesn't solve your issue, then here is a path for you to pursue.
.
1/2 Lit Toggles - build.prop editing issue
Amb669 said:
i had issues enabling wifi after installing a custom kernel & with certain roms (same 1/2 lit green toggle crap, sometimes it would toggle back off sometimes it would just stay 1/2 lit and make my phone burn)
my solution has been 100% working for myself so far, if you'd like to try it here's the directions
1. install es file explorer
2. set root permissions AND mount as writable, within es file explorer
3. use es file explorer to navigate to the root of your phone (system directory, i think) and open the build.prop file than select the es file editor
4. find the line that says ro.securestorage.support=true and edit it to false, save and close
5. reboot phone, and hopfully you have no more wifi issues
i was skeptical when i first did this because nothing worked to fix my wifi, but this works 100% for me on every rom
Click to expand...
Click to collapse
I have the exact same problem - I'm on US AT&T, I337UCUAMF3, Android 4.2.2 and this solution looks promising. I followed the steps and have RW set up, but ro.securestorage.support does not exist in my build.prop file. Does anyone know if this property is specific to certain builds and/or if there is an equivalent property?
jrwebdev17 said:
I have the exact same problem - I'm on US AT&T, I337UCUAMF3, Android 4.2.2 and this solution looks promising. I followed the steps and have RW set up, but ro.securestorage.support does not exist in my build.prop file. Does anyone know if this property is specific to certain builds and/or if there is an equivalent property?
Click to expand...
Click to collapse
Adding it to the end shouldn't hurt as long as you make sure you set properties on the build.prop
DeadlySin9 said:
Adding it to the end shouldn't hurt as long as you make sure you set properties on the build.prop
Click to expand...
Click to collapse
Thanks for the tip, good to know it wouldn't screw anything up. I did add it to the build.prop file, rebooted and it seems to have had no effect. Seems that if the property is not present in the file, adding it does not resolve the problem.
Editing build.prop is a plausible workaround if the OP has root access. If he doesn't wish to root his phone, then he can clean up his system configuration by reinstalling as I described earlier in the thread without requiring root. Two approaches to the same result.
And yes, you can add the entry if it doesn't already exist in your configuration.
.
jrwebdev17 said:
Thanks for the tip, good to know it wouldn't screw anything up. I did add it to the build.prop file, rebooted and it seems to have had no effect. Seems that if the property is not present in the file, adding it does not resolve the problem.
Click to expand...
Click to collapse
UPDATE: I didn't have any luck using the build.prop fix, nor with the wpa_supplicant.conf fix that some of you may have seen mentioned. I ended up Recovering to stock MF3, (I was already on MF3). This gave up my root access, and I didn't take any additional steps to hide busy_box or anything like that, after my MF3 recovery it looked like I was safely unrooted and I contacted AT&T support via web-chat, and they asked some questions and sent me to a nearby AT&T device center. I took it there, they didn't ask a single question about how it happened, whether I had rooted it, etc(although I was paranoid that there would be traces left behind and they would turn me away). Long story short, they replaced the phone no questions asked!
In my opinion it would seem that while this problem could in some cases be caused by rooting and tinkering, it's enough of a known issue to AT&T that they would replace it under warranty. Hopefully Bell or other carriers would do the same. My advice is to try your carrier, particularly if you are with AT&T.
Just to help people who are searching for a solution. I had flashed a T-Mobile rom and my wifi stopped being togglable on my AT&T S4. That is, I couldn't turn on wifi. The button would get stuck on. After trying to flash what I thought was the right MK2 modem and still having the same issue, I thought I was out of luck. However, I found this one here: http://forum.xda-developers.com/devdb/project/dl/?id=3275 and hit paydirt. Flashing it using Safestrap and then wiping cache and delvik worked. The file is called jflteatt-MK2-modules.zip.
Only for WIFI, for me what worked was I had to open a litte bit the one side of the phone and close it again (removing a little the plastic, like if you were going to open the device) Wifi started working again, no need to flash any roms, it seemed to be something related with pressure, humidity or something inside the phone.
Regarding bluetooh I had no luck still not working, only keeps saying activating and never gets activated.
does anyone find a solution for this yet?
I have had the same issue for months. Started after warranty was up. I have AT&T on nc1. I tried everything mentioned here but nothing worked. Even left it with the phone repair guys for a week with no luck. It first started after I flashed Hyperdrive ROM. A reboot helped for a while. It actually came back for a week on Kevp's ROM, but then had an error that reboot the phone and lost it again. Phone is now on Craigslist and I am back to my S2. On a high note it's nice to not have a unlocked bootloader again.
you need to flash the exact same model/firmware's modem file atleast thrice before giving up.... i have a simalar issue the thing is my model number is 1377z and google doesnt have a working flashable modem file for it so basically i am screwed too wifi calling and video recording doesnt work....
update :: saw that you got it replaced !!
smoooth .....
Amb669 said:
i had issues enabling wifi after installing a custom kernel & with certain roms (same 1/2 lit green toggle crap, sometimes it would toggle back off sometimes it would just stay 1/2 lit and make my phone burn)
my solution has been 100% working for myself so far, if you'd like to try it here's the directions
1. install es file explorer
2. set root permissions AND mount as writable, within es file explorer
3. use es file explorer to navigate to the root of your phone (system directory, i think) and open the build.prop file than select the es file editor
4. find the line that says ro.securestorage.support=true and edit it to false, save and close
5. reboot phone, and hopfully you have no more wifi issues
i was skeptical when i first did this because nothing worked to fix my wifi, but this works 100% for me on every rom
Click to expand...
Click to collapse
Just tried this on my sgh-i337m that was having the same wifi issues after rooting and flashing a kernel. Rebooted and wifi is up and running. So far so good. Thanks a lot!