Database Users

[Q] ROMs work great, except...?

Hey all, been poking around the forums and trying out various WM and Android ROMS and they all seem to work beautifully, kudos to the devs.
I seem to be running into a bit of a problem though.
My phone is an MP6900 (Vogue 100) from Bell. And while the roms work great, the second my phone goes into standby mode (when not attached to my comp) the phone resets.
I have tried four different roms, two android and two WM and the problem persists.
Also hard resets, battery removal etc etc to no avail.
I also tried to roll back the radio as that got updated when I went to my stock rom previously.
And to boot I can't seem to flash back to the stock ROM anymore, while I was able to even just yesterday. I get Error 262, for whatever reason.
I was wondering if anyone else has run into this issue and could point me in the right direction.
And I did a search on the forum (pre-registration) but couldn't find anything, sorry if this has been brought up before.
Again, great work on all of the ROMs! I had no idea phones had come this far. (Sad to say but true lol)

JustinHTC said:
Hey all, been poking around the forums and trying out various WM and Android ROMS and they all seem to work beautifully, kudos to the devs.
I seem to be running into a bit of a problem though.
My phone is an MP6900 (Vogue 100) from Bell. And while the roms work great, the second my phone goes into standby mode (when not attached to my comp) the phone resets.
I have tried four different roms, two android and two WM and the problem persists.
Also hard resets, battery removal etc etc to no avail.
I also tried to roll back the radio as that got updated when I went to my stock rom previously.
And to boot I can't seem to flash back to the stock ROM anymore, while I was able to even just yesterday. I get Error 262, for whatever reason.
I was wondering if anyone else has run into this issue and could point me in the right direction.
And I did a search on the forum (pre-registration) but couldn't find anything, sorry if this has been brought up before.
Again, great work on all of the ROMs! I had no idea phones had come this far. (Sad to say but true lol)
Click to expand...
Click to collapse
Sounds like a dying battery to me.

It worked fine in the original Windows though so that's why I am a bit baffled.

what happens if you put your device in bootloader and try to flash to stock? Error 262 is a connection error. basically happens whenever some event interrupts the flashing process (a dead battery will cause this). If you haven't yet, try to flash to stock via the method in this post (bootloader and then flash)

Tried that, didn't work. Just gets to 31% and pops 262 no matter how I try to do it.
The odd thing is though that I can flash any other ROM just fine.
Would reformatting the SD card work?

Figured it out. I used the 0.41 ROM to unlock the phone which was causing the issues. I reflashed with the 2.3.1 and everything works fine.

JustinHTC said:
Figured it out. I used the 0.41 ROM to unlock the phone which was causing the issues. I reflashed with the 2.3.1 and everything works fine.
Click to expand...
Click to collapse
0.41 was reportedly having tons of issues, you should have started from there
Glad you got it working.

Too many issues so few roms

3rd thread, about 4th rom flashed
constant issues with builds. have gone from stock to:
cm 6.1.3 -apps crashing, random crash notices i.e "phone book has crashed force close" - "the process com.android.phone has stopped unexpectedly"
cm 7 - random reboots, opening browser caused power cycle, wifi issues, lag (thread posted, no solutions at the forefront)
currently on tripnraver pre release. now another issue. no signal what so ever.
original baseband on this xperia x10a is .55. it is suggested to use with bands 52 or 49.
loading either of these basebands. which ive done. doesn't seem to fix the no signal problem. the description states should be backwards compatible even if appropriate bb is not installed on device. yet no luck.
attempting to flash either baseband fails to resolve this problem. currently trying to flash back to stock and try another full reinstall and baseband flash in flashtool.
any ideas would be a great help. having to flash x number of times between roms is getting quite time consuming
thanks everyone.

if you want to stay on the miui rom, you can flash the baseband patch located here and stay on whatever baseband works best for you (I'm on .55 and find it fantastic), then when you load the rom, go to dev tools>bad behaviour>crash the system server.
http://forum.xda-developers.com/showthread.php?t=1011608
Otherwise, I would recommend wolfbreaks cm 6.1.3, as it is the most stable. You must have done something wrong during installation as I never had an issue with his roms.

The only issue I have ever had with any rom is MiUi and thats because I used the wrong baseband. You must be doing something wrong for you to be having problems

if you want, try this flash, it's trips miui pre-final with the baseband patch implemented.
http://www.multiupload.com/KCKE9K2WKN
worked with my .54 baseband

thanks so much for the links to the baseband patches. i remember coming across a thread that posted it but unfortunately forgot to book mark. so im definitely going to go ahead and try with the patch installed. hopefully all works well
each rom ive flashed has been done properly according to instructions. cache wiped, dalvik, and full reset as per menu options in xrecovery.
one way or another i experienced lag for the most part, and as mentioned some random crashes. never had reset on wolfs rom just error messages at times. trips rom worked excellent, smooth and quick. hopefully with the patch implemented everything will work flawlessly
thanks you guys
*Updated
Flashed over rom with baseband patch. signal working. everything running smooth.
except for when using camera zoom. zoom default displays 0x. as soon as the option is selected it spawns an immediate force close
any patches? or similar outcome for anyone else?
i will outline my steps below so everyones up to speed on how i performed this flash.
- flashed back stock in SEUS
- root with one click (success)
- installed busy box (market)
- installed xrecovery apk
- booted into xrec
1. full factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
5. install custom zip from sd card
6. selected trips rom with bb patch implemented
5. reboot

Camera zoom doesn't work in most ROMs yet and the lag you were experiencing was likely just the FW "settling" it can take a little bit and a couple reboots sometimes for the phone to calibrate itself properly.
Sent from my X10i using XDA Premium App

thanks cmoney. maybe ill try my luck with cm7. give it a few reboots and hope for the best. great rom. im really loving trips iphonesque style
clean smooth and quick. everythings working great. hoping the zoom may get fixed soon enough. only other inquiry i have with regards to this rom is the apps2sd.
this feature is essential to myself personally. and it is not working as ive noticed on this rom. ive read a thread with regards to a fix for the last release. i checked the settings for an enable option in case the feature requires being manually set as active but nothing listed. within sd settings state reads as unavailable. if anyone has an answer as to whether this fix will function with the current pre release. ill be going ahead with completeling the flash and reporting what i find back on this thread.
thanks again everyone

Try Wolfbreaks rom. It's very very stable for me. It has cam and everything upto date.

im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.

thesoundofsilence said:
im going to flash back to wolfbreaks updated 6.1.3 unless anyone can point me in the direction of a fix for trips rom.
the smooth and fluid feel of trips rom was brilliant. i am hopeful someone has directions for an apps2sd fix as i have flashed the build twice and the same issue has occured.
Click to expand...
Click to collapse
works for me on trips newest....

i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?

thesoundofsilence said:
i just downloaded the new version 1.0
this is ridiculous. without the baseband patch. crash system server. no signal
now apps to sd is saying "apps2sd is not supported on this device"
this is an xperia x10, so obviously there must be something wrong here.
can anyone elaborate on exactly what to do about this because im going to attempt to flash back the rom, flash the bb patch right after, reboot. i assume this will only solve my signal issue. but this apps to sd is getting extremely frustrating and i can not figure out why it is not showing an enabled status.
- Flashed 1.0 with baseband patch - network signal resolved.
- apps to sd is STILL not working. and i really dont know what to do about this. everything else on this rom is perfect. is there something im missing? i came across a patch for apps2sd fix but this was for a previous version. would it be needed here? is there a setting that must be enabled first in order to start apps to sd as a service.
- as mentioned previously within the main menu, under sd card settings. message states "apps2sd is not supported on device" and on previous build would display "apps2sd unavailable". its simply impossible that the phone doesn't support it. as with every other rom the feature has worked. froyo would support it. the question is how do i go about enabling said feature?
Click to expand...
Click to collapse
I dunno man, it works fine for me, but I copied data from my 0.3.2 xrecovery image, so that might be why. try flashing that apps2sd fix for 0.3.2, should work fine

damn it. i just found that thread. found the links to the fixes. so far ive tried miui32_a2sd_fix.zip. and flashed that over with xrec prior to reboot. which did nothing.
there are two more links so im going to try those two flashes as well and hope that one of them will do the trick. if its working when utilizing .32 patches then ideally the bloody thing would have to work here. thanks for the input though dtox. much appreciated

I don't know what else to suggest man
From the feedback I see in the miui thread, everyone else is reporting it working!
Did you factory wipe, wipe cache partition, and wipe dalvik cache before install? then flash the miui 1.0.zip, and flash immediately the baseband patch then reboot into the rom.
Remember not all apps allow apps2sd so use something like android system info, go into the applications tab click on one, click manage and then see if the option "move to sd" is highlighted. Like I said check a few though, not all apps can be moved

i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox

thesoundofsilence said:
i just replied in the dev section lol but yes i have gone ahead and checked the applications menu. specifically downloaded a file i have moved to sd on a previous occasion from the market.
nothing
the "apps to sd" selection is completely greyed out. no matter what application i click on or download. i did a full wipe, full install, and selected the apps2sd fix immediately after rom and bbpatch flash, prior to rebooting. issue still remains.
we'll see i guess. thanks again dtox
Click to expand...
Click to collapse
Try it again but without the fix...

i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.

thesoundofsilence said:
i did that to it doesnt work i get the same message displayed
i tried with fix and without. another thing to note is that the rom itself says it should work with a different baseband as it has elements of unified. (which it doesn't) i had to flash the bb patch to get signal.
im not sure whats up with this but until i figure it out for a certainty ive flashed back over to wolf breaks rom. hopefully something will surface and i can give trips rom another go.
Click to expand...
Click to collapse
No idea man, like I said it is fine for everyone else so I'm so no big development will arise that will make it function with your phone....

maybe it has something to do with 10a. i dont know. but the point is it shouldn't even be doing this regardless. hypothetically if its froyo and it has apps2sd built in. it should work. its not the way ive flashed. the phone supports it. so my only conclusion the rom must not be as compatible as stated. and from reading different posts about the prev builds sometimes the patches worked at other times they didnt. and also the fact that the rom is claimed to work without the need for a bbpatch. yet without the patch instaled phone caught no single. i guess certain unexplainable glitches can be bound to happen at times but any how ill give it one last go.
if nothing comes out of that then im giving up on that build because it seems relatively hopeless.

lol I'm using an x10a...
Still man you're the only person reporting this. Don't you find that strange? What baseband are you using anyhow?

had lite'ning 1.4, updated to 6.1, now wifi issues

ok basically i bought the phone second hand with lite'ning 1.4 on it and the wifi worked perfectly ok all the time. Since it was very old i updated it to 6.1. ever since then I have had issues with the wifi. it will connect perfectly fine to the router but i have no connectivity from it, nothing will get any net access at all. This is also not 100% of the time, its MOST of the time but not all, i do have moments where it does work fine. very very odd.
I have since tried updating the kernel to ninpho 2.1.3 from the 2.0.5 that comes with lite'ning 6.1, but that made no difference.
Someone suggested i try a wifi fix app from the market so i downloaded "FXR wifi fix and rescue" and ran that. It ran ok, wiped all my wifi settings and i restarted, but it has not solved the problem at all.
i find it very very odd since if it was a problem with the kernel OR the rom then everyone would surely have exactly the same problem. I know some people report wifi issues but most dont seem to.
anyone have any other ideas?

The odd thing is that it worked before the update. That means that it will most likely be software related.
You could try flashing something totally different like MIUI or CM. They provide kernels too, so this might resolve it, if your kernel and rom don't "like each other". This usually shouldn't happen, but updates breaking wifi shouldn't too. So it might be worth a try.
Sent from my GT-I9100 using XDA App

if i went to something completely different i assume i would have to factory reset the phone to wipe it first? (or factory reset it AFTER installing the new rom?)
was trying to avoid wiping it as i dont want to spend endless hours setting up everything again. i have backed it up with the free titanium but id still like to not have to find out whether the restore actually puts everything back properly
its very odd as its not completely broken, sometimes it does actually work, and it always connects to the router itself without any problem.

Probably wrong modem for you, flash another one. You can find modems in the developement section.

ok thanks I will have a look at that. It is currently on XXKH3 which is what came with lite'ning 6.1. i am confused though, all SGS2 hardware is identical so if this modem in 6.1 is causing this issue, wouldnt it affect every sgs2 that uses that modem?
I found the "shipped modem collection" post in the original development thread so have asked in there which modem i should try.
ok apparently i should try XXKI3. for o2 UK provider.
although i have now read that wifi is not managed by modem but by kernel only. if this is true then modem will not help me

Well, if the wifi is not managed by the modem, try what I proposed you earlier. The simplest would be to flash CM. Make a backup of your current rom, then do a full wipe and install CM.
As for your data:
1. Titanium backup restores your apps with their data (if you wish). That means that, for example, your games will keep their saves, other apps their settings and so on.
2. Assuming that you have a google-account, you don't have to worry about your contacts, calender,... Just sync it before you flash.
3. The backup you make in CWM will backup everything in case CM doesn't work for you.
In case it does work and you'll want to keep it, the other two other parts of your backup will minimize the remaining work. Note that you shouldn't restore "standard"-apps like the media-player or the SMS-app if titanium backup tells you that the app is not currently installed on your fresh CM. This means that CM uses it's own media player or SMS app. It could lead into problems to mix TouchWiz apps with CM.
A side-note:
Don't use the "stable" version. It had more bugs than expected and they made it a RC again. However, it is still in the stable folder. Get the latest nightly.
Sent from my GT-I9100 using XDA App

yep i think it is kernel. just noticed that 1.4 had cf-root, 6.1 had ninph 2.0.5 and i then tried ninph 2.1.3 and both ninph's have had the issue. i just tried speedmod k2-13 as i already had that downloaded and so far the wifi has been ok so hopefully thats it fixed. i guess it was something to do with ninph (i am thinking that because i have it set to sleep the wifi when the screen is off that somehow ninph is not handling this properly).
possibly one good thing to come of it all, ive updated the modem to KI3 which is supposedly the best one for o2 UK so i may even save more battery and speedmod is meant to be really good for battery too. I still have lite'ning on it at the moment.
i might have a look at CM anyway but i do kinda like lite'ning (although i havent actually used anything else since the phone came with it!)
also need to look at wakelocks to see if i can save some more, although not sure how i go about 'fixing' them at the moment

The choice between CM, MIUI and the stock mods is the choice between three different UI's.
I've had all three of them for some time. As you got CWM, you can just create a backup and do a sightseeing tour through the world of custom roms. Believe me, it's absolutely worth it. To get an idea of the main differences, I've written a short overview for you:
Stock mods use Samsung's TouchWiz. The default user interface that you get when buying a Samsung Android phone. So it mostly looks and "feels" the same and you can't do much about it.
CyanogenMod gives you the pure Android user interface. It's the closest to the Nexus phones by google, but gives you some extras. It is much more customizable than stock roms. It's sleek and fast.
MIUI is a whole different story. They're "Redefining Android". I think calling MIUI an "Android custom rom" is an understatement. It's an entire OS. The result of putting the best from iOS and Android into one powerful OS. It adds tons of useful(!) features. If you've ever used Windows Phone 7 or an iPhone, you know what a big step forwards Android is when it comes to features. Switching from Android to MIUI is just like that. There is just so much more. It is BY FAR the most customizable Android you can get.
Wow. If I look at how long the texts are, I see that I'm pretty biased. :O
Well maybe because I've switched so often between them. The stock roms had no chance, because after I used one of the others I found out that TouchWiz doesn't cut it anymore. I hate how "iPhone-ish" MIUI is, but if I flash CyanogenMod I just miss so much. Giving you a list of what MIUI adds would be another long post of this length.
Sent from my GT-I9100 using XDA App

cool thanks will have a look at MIUI at some point.
spoke too soon earlier, the wifi is maybe slightly better on this speedmod kernel BUT when i wake the phone from sleep, it takes about 30 seconds before i can connect to the net with anything. the phone connects to the wifi straight away, but i have no connectivity for a good 30 seconds and then it starts working. (its not the router, i am getting a connection and an IP pretty much as soon as i wake the phone). also the 30 seconds or so only STARTS once i try to connect to something. if i wake the phone and do something that does not want net access for a few mins and THEN try to get on the net via wifi (which shows as connected the entire time) then again i have to wait about 30 seconds from when it first tries to connect before it will start working.

ok slightly confused again.
I have lite'ning 6.1, speedmod k2-13 kernel and XXKI3 modem. I am trying to get cwm installed so i can make a full backup image of the entire phone while i try to sort out the wifi issues. i downloaded rom manager from market, and selected the firstion option in the app 'flash clockworkmod recovery'. it brings up a menu saying 'confirm phone model' with AT&T galaxy S2, a coulpe of i9000s and a plain "Samsung Galaxy S2" which is the one i selected. it downloads something and says successfully downloaded clockwork mod recovery.
i then choose reboot into recovery. when rebooting it attemps to install something but then says "failed to verify whole-file signature" and aborts. so im just stuck with the standard recovery instead.
so now im confused, have i missed something?

Ehhhhm, you don't need to do it.
Have a look at the features of the speed-mod-kernel:
Current features:
Root and CWM:
- Automatically installs root (su)
- CWM 4.0.1.5 recovery
It already installs it right away.
Just in case you messed something up. You should flash the kernel again.
Besides that you don't need the RomManager at all. Just shut your phone down and boot into the recovery with the key-combo. Create and restore backups from there.
Sent from my GT-I9100 using XDA App

!!!Stop SAMSUNG GALAXY S3 FREEZING Problems!!!

Well, here is my story...
My cell phone is a Samsung Galaxy S3 mod. GT-I9300. Locked for Digitel (Venezuela mobile carrier). Android Stock Rom version: 4.1.2.
Preamble:
I bought this cellular a year ago, and it worked flawlessly almost for 12 months straight. I haven't experienced any single freezing or rebooting problem. I downloaded KIES and the program detected that a new version of Android was available for downloading for my phone. Bump! Error. I should have backed up my EFS first before doing the upgrading. BACKUP YOURS, IMPORTANT!)
NOTE: Backup your personal data as well since any ROM installation will remove for sure your personal data and info.
After upgrading and a few days later, my cellphone started to act somewhat funny. I started to got some freezing. To be specifically, my phone started to freeze, the screen just froze and nothing happened when I touched the screen, pressed any button. The only thing worked was to restart the cell (by pressing and holding the POWER button or by removing the batteries). Anyway, the freaking freezing problems continue occurring.
By the way, the warranty expired just a few days ago...
Since I couldn't do anything to stop the freezing problems, I decided to root the cell and install a new version of Android not official for Samsung and test its performance. But before that, I factory reset my cellphone, but it didn't work at all.
I tested several Android version I could find on internet: cm-11-20140....-i9300.zip, specifically, the SNAPSHOT, STABLE, NIGHTLY version. None of that worked, I also tested the cm-10-20... without luck. In fact, the freezing problems with those versions got worse and worse.
Taking the above in consideration, I decided to re-install the stock rom version (ver. 4.1.0) the one that was shipped with my phone when I bought it. You can find these version for any carrier in the world at: sammobile
I flashed and I used it for almost a day or so. During that period of time, I could feel that the freezing issues were gone, not even a freezing event. But unfortunately, I couldn't connect to any Mobile Network!!, so I had just bricked my cell phone !!! I took it to the cell carrier company (DIGITEL) and they could not do anything since my warranty already expired. WTF ! I was alone with my own problem now to sort it out.
SOLUTION !!
By no means I mean this is a cure but I have just stopped getting the hellish freezing and rebooting problems, and I just wanna share my experience with you so maybe I could help you to get rid of this annoying issues for the time being.
Picking up where I was left off, all I had was my bricked phone and a working ROM: ver. 4.1.2, So I decided to to reinstall this version back on my phone and see if it connected to the mobile carrier.
I reinstalled it and of course, after erasing cache partitions and making a factory reset. The procedures to install any ROM on your cellphone you can find it on internet (for instance, youtube may help a lot).
After I installed the version 4.1.2. my cellphone could connect to the mobile carrier once again... phewww!! But the freezing problems continued to appear in the fuc# phone. Well, now the only option I had to test thoroughly my cell was to install any application one after another but testing if the application was the culprit for the freezing issue.
But right after installing the stock Rom, I got a error message when my phone run to the first screen (Home Screen): TOUCHWIZ stopped responding... it lit my LIGHT BULB! I searched the web for the TOUCHWIZ and found out reports regarding many problems with Touchwiz.
Holy craps! The TOUCHWIZ is a BUGGY APPLICATION that comes with the STOCK ROM developed by SAMSUNG.
My friends there is no way to UNINSTALL that application but to use another LAUNCHER. I fired up and decided to download KIT KAT Launcher. Well, I downloaded the launcher and when you first run this application a windows pops up so you can decide what launcher the cellphone may use and the time to use it. I select ALWAYS I press the HOME button, the launcher to use is KIT KAT.
In addition to that I disable various stuffs, follows (you have to go through the setting app):
Disable Touch wiz (delete CACHE, and FORCE STOP)
Disable GPS
Disable Multi Windows
Disable Swipe Lock ( I found my cellphone freezes a lot while this is on)
I don't use a lot of widgets... but only one: The Clock and Alarm widget.
So far (it has passed 5 days straight without freezing). My phone froze on me while I was downloading something (maybe the phone was updating an app) and at the same time I was texting someone. I am suspicious that there is something to do with the downloading system too and the phone that could trigger a freeze.
Anyway, if you have experienced the freezing issue on your Galaxy S3 just like me, then try what I just outlined and give it a test. But do not download a bunch of program at the same time, just pick one by one, and allow some time to test your application and check if your phone is stable before continue with the next app to download and so forth. I have downloaded so far: whatsapp, BBM, sudoku and other games.
Hope you can get rid of the freezing problems just the way I did, any question feel free to ask.
I will continue posting any advance with my phone.
FROYCARD
PS: excuse my standard English.

Flashing a custom rom would help with the freezing issues too!
Try temasek's 4.4 rom its a lot more smooth than ur stock ull feel u have a new phone
You also lost ur carrier signal because ur efs partition was read only or something so backup ur efs before flashing the rom

kariiim said:
Flashing a custom rom would help with the freezing issues too!
Try temasek's 4.4 rom its a lot more smooth than ur stock ull feel u have a new phone
You also lost ur carrier signal because ur efs partition was read only or something so backup ur efs before flashing the rom
Click to expand...
Click to collapse
Nope,, it didn't work with my cellphone. I already tested it. As a matter of fact, I can name you all the ROM I flashed to my cellphone:
cm-11-20131115-UNOFFICIAL-i9300-V2
cm-11-20140104-SNAPSHOT-M2-i9300
cm-11-20140117-UNOFFICIAL-temasek-i9300-V36
cm-11-20140125-NIGHTLY-i9300
cm-10.2.0-i9300
None of the above rom I used stopped the freezing issue, that's why I needed to return to stock rom, and since then I am using it without experiencing any laggy or freezing.
Thanks anyway. :good:

Isnt it possible to create a rom with all of Samsungs bloat ripped off (TouchWiz included) and replaced with stock apps?
The problem is that non stock kernel roms use up a lot more battery than the stock one...

what?
i havent got this

Dude, you seem like a total beginner at this. You might want to start by trying a proper wipe, install a rom like Temasek and install a kernel like Boeffla.
Touchwiz is not the problem for your freezing. Get a custom kernel on there and try undervolting to lower the temp your phone. It may be too hot and may lock up.
You don't have to stick to roms available from your carrier either. You might just want to try any recent 4.3 rom from Sammy.

jinosong said:
Dude, you seem like a total beginner at this. You might want to start by trying a proper wipe, install a rom like Temasek and install a kernel like Boeffla.
Touchwiz is not the problem for your freezing. Get a custom kernel on there and try undervolting to lower the temp your phone. It may be too hot and may lock up.
You don't have to stick to roms available from your carrier either. You might just want to try any recent 4.3 rom from Sammy.
Click to expand...
Click to collapse
Yeah,,, you may be right I am a newbie... but since I stopped using TOUCHWIZ, I have experienced fewer a fewer lock-ups. I dunno what it is happening with my phone, but that is a fact. I am using KITKAT launcher.
The current stock ROM I am using is: 4.1.2 .... (I9300UBEMH2)
I am not familiar with undervolting to lower my phone's temp... maybe you can guide me about using it, or I could search the web for it.
UPDATE: I installed TWITTER Apps yesterday and each time I used it, it froze my phone for 12 min approx. Any suggestion?

Read the freezing thread sticky .
Delete this non working fix as well .

JJEgan said:
Read the freezing thread sticky .
Delete this non working fix as well .
Click to expand...
Click to collapse
Why should I? Are you a moderator of this forum?

Well I just want to update my post.
Yesterday I just wanted to continue figuring this freezing problem out. Since I published my experiences about freezing until yesterday the problem appears to have reduced significantly. I was using stock ROM ver. 4.1.2 flashed with KIES.
But I wanted to continue testing other ROM's. I tried to install a ROM named SAMMY'S ROM developed by guy named JustArchi (that I found in this forum). However I could not install it on my phone (SGS3 - GT-I9300) since it gave me some errors when I tried to install: ERROR STATUS 7
A margin note: This techie or nerdie called JustArchi gave me the boot from his thread for trying to seek help on this error.. so I trashed this SAMMY'S ROM and move on with another solution.
Whatever, I downloaded another official stock Rom ver. 4.3, released by SAMSUNG, intended for IRELAND - I am not from Ireland, but Venezuela (I founded it at SAMMOBILE under the top 10 latest firmware just released). By using ODIN, I flashed my phone, and to tell the truth, my phone feels differently. I haven't experimented any sluggish or lagging, not even a freezing so far (knocking on wood).
For precaution, I am installing one app at the time, and giving it time to see if everything is stable.
Conclusion: to any guys who is getting the annoying freezing, I think you must stick with it until your mobile carrier makes ROM ver. 4.3 available. Otherwise, if you are like me, wanting to work things out for yourself, download any ROM (ver. 4.3 compatible with your phone model) and test it on your phone. Before doing that, you just have to search the Internet for directions to do so, I am not responsible for what you do with your phone. I'll keep updating if another problem arises.
Note: since I am getting some rude comments from senior members who think they are too techie to read newbie's comments, queries, etc. I am not interested in their replies since they are not helping at all, thus I just ignore your lame comments from now on. Just scram.

Dude, you're really not helping anybody here with your information here. I don't know what you think you're sharing. The error 7 pertains to recover error which can be eliminated by installing an alternate recovery version.
I don't care if you're a newbie or not but you are spreading false info.
I'll scram now.

Need an idiot out with GPS issues

I never had to use my GPS til now and found out it cant lock on to any GPS sat. Ive had no other issuses with this phone
This is all the things ive done. I've enable TMO AWS since day one. I'm a TMO user that was a given.
My phone had the old orginal baseband, i think its MDC, then i upgraded to MDL and now i'm on the new NB1.
Ive bounced around all KK roms and even some older roms i still had saved. Nothing can get a GPS lock. I'm leaning now towards something physical, but Google now works and they can trianglulate via cell towers.
Ive 99% sure ive enable all GPS items. Location settings are on high accuracy.
Ive been using GPS status apps to help get a better location and nothing seems to be working.
Does playing around with Kernals help? I never installed one before or played with any of those. I need GPS to be working now so if i cant figure it out soon, i might just jump ship to the nexus/s5/iphone

bump up. Anyone have suggestions?
ive tried many different roms, Touchwiz and not touch. All diffrent basebands. I dont know what kernal work with what roms so ive been avoiding that

A kernel is not going to help. Have you gone back to stock rom and still have the issue? It sounds more like it's a hardware issue. Like the gps antenna is not working.

sadly i'm thinking the same thing. It looks like a cheap part but no idea on taking it apart just yet.
I always thought a kernal acted like a driver for computers,

turtle* said:
sadly i'm thinking the same thing. It looks like a cheap part but no idea on taking it apart just yet.
I always thought a kernal acted like a driver for computers,
Click to expand...
Click to collapse
The kernel is the boot image and in essence it interprets between the software and hardware. If you've flashed other roms you've flashed a kernel each time.

jd1639 said:
The kernel is the boot image and in essence it interprets between the software and hardware. If you've flashed other roms you've flashed a kernel each time.
Click to expand...
Click to collapse
ah, understood. I thought it was like the baseband where i had to manual change it.
Does anyone know where the GPS antenna is located at? Is it a part i can swap out or attached the main board. I just pulled apart the phone looking for obvious parts not being connected and everything looked good.
Ebay listings GPS antenna as the 3g blue cable that runs down the side of the battery. I dont think thats the GPS antenna but it does cost a small amount but i dont think that will help.

before you tear it apart try what jd suggested and odin back to stock. you may want to backup and format your internal and ext sdcards also. they can harbor old junk that may effect new roms.
also, are you wiping all including system before flashing and on your phone and some roms i believe you have to odin a modem.bin file as part of flashing. am not familiar with that stuff as i am i337 and never used odin. "yet"
not sure if any of it will help--but--
good luck

Might need more info on what our suggesting.
I'm wiping data and the option under data in clockworksmod.
I don't have anything important, everything is cloud.
Sent from my GT-I9505G using Tapatalk

I think he is suggesting that first you get the STOCK MDL Odin package and flash it. Then wipe all data, dalvich cache, and internal sdcard (remove your external sdcard before hand). Then power it up and IMMEDIATELY turn OFF WiFi, you do NOT want it to try to update on its own. Now check GPS and see if it works.
If it does work now (the FIRST LOCK can take a bit of time) Then again use casual+motochopper to root and install twrp. Then flash a good ROM. Once that is done you can check GPS again and make sure it works, it may take a bit since it will be the first lock again (I always had trouble with MK2 modem for some reason. All the rest worked perfectly).
Or just make sure you have the ROM you want to run on a external sdcard. Then remove it for safe keeping. Now go into twrp/clockworkmod and wipe data factory reset/ cache/ dalvich cache/ and sdcard. Power off the phone after it is done and reinsert your external sdcard. Do not boot up but go directly to where you have the ROM at on your external sdcard CIA twrp/clockworkmod and flash the ROM. This will give you a perfectly clean slate. Now once it is done and booted up let it sit without touching it for at least 5 minutes. Then check GPS. If it works you are good to go. Then download any of your apps from the play store (not from titanium backup in case some system setting are being reinstalled with something). Once you have your apps back check GPS again to make sure one of them hasn't caused an issue with your GPS. If all is still good use titanium backup to recover your DATA ONLY for the installed apps.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

I have no idea why
I had the same problem, and I just fixed it too.. I don't know if this will cause the problem but here it goes.
I found this solution from the forum, but forgot where..
1) I installed the rom (AOSP) I wanted and checked if gps worked (but didnt work, checked with GPS Status)
2) Went to recovery, nandroid the Rom
3) Clean install to Rom that GPS worked (TW Rom) and again checked if gps worked (and worked, also checked with GPS Status)
4) While leaving the GPS toggle on, went into recovery, and without wiping anything, restored the AOSP rom
5) booted checked GPS Status and I was able to see the satellites..
I have no idea right now if this will cause any trouble.. but at least gps works in aosp..
I'll update again if I face any problems
Good luck

Its working now. Not 100% sure what the problem was but that's for everyone with the suggestions.
I flashed about 15-20 different Roms from touchwiz to aosp and miui thing.
Opened the phone up and looked for basic things not connected.
Removed my case and wireless charger insert.
Did the MDB Odin flash. With stock ROM. It didn't still didn't work.
Finally gave up and flashed back old GE ROM. And all of a sudden it works.
I think the Odin wipe and SD card wipe had a big role but not sure. Either way it works now. Might not be the fastest connection to GPS as it takes a few moments now but it works. I'm normally locked on to 13/21 SATs out there in a matter of 2-3 mins.
Now that it works I'm a little weary of trying MDL
Sent from my GT-I9505G using Tapatalk