Related
My screen's working great, and always has. However, I was looking to replace the outer touchscreen, (so not the full thing) as it's got a few scratches and theres a bit of dirt under it somehow. They are pretty cheap in comparison to a full screen, and I have opened my device before to replace the front speaker. How difficult is replacing this touchscreen? Also, one of the listings I found talks of 2 types-I've no idea which I have, as others say they work with all.
Here's the link to the ebay page.
http://cgi.ebay.co.uk/I145-Touch-Screen-Pad-blk-for-HTC-Tytn-P4500-O2-Trion_W0QQitemZ260190001334QQihZ016QQcategoryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Mine is an SPV M3100.
Thanks.
Hey,
My HTC Universal screen just cracked, surprisingly without any outside intervention. It was ok this morning and was sitting on my desk. When some friend called me and I picked it up the whole upper screen was cracked. Weird.
Anyway, it's time to replace because I really like this device. So I was looking on ebay and found some sellers who will send it for around 130$-140$ USD. I was wondering if there are some cheaper sellers available outside of ebay that I couldn't find.
Also, maybe someone has a broken Universal with a working screen. My device is missing the front plate (where the IR) and I could always use the extra parts.
Thanks!
- Yaniv
Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.
Hi all, I cracked the screen on my HD2 a few days ago and have been eagerly reading the reports of how to replace the digitiser, etc. I'm working up the courage (and getting the tools) to do it, but in the meantime the digitiser and screen are perfectly functional, if a little bit unsightly. I thought I'd get hold of a screen protector in the meantime so I don't end up with bits of glass in my fngers, etc. Any recommendations of a form fitting protector (or form fitting case) that would fit the bill? Ideally it would cover the bezel around the buttons too, because one corner of it is quite chipped. The pics on ebay are kind of hard to tell from. Any advice much appreciated!
I might be too late as you mentioned that you already getting the tools to fix it yourself. There are specialty repair shops that fix screens, I heard they are not too expensive. I don't know the exact price, but someone with a broken nexus one got his phone fixed this way. Do you mind telling how you cracked your screen, was it your negligence or is it too fragile?
I'm not looking for info about how to repair - I've read those threads. I'm interested in the best temporary fix for the meantime.
The cracked screen is largely due to negligence... dropped it outside. Woulda been nice if the phone was a little more sturdy, but can't expect much better. And thank God it still works just fine as far as I can tell. Gonna be more careful now...
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Amazon/ebay has parts where you can just order the LCD/Digitizer etc, but then to separate them you have to have a heat gun etc. if you touch any part by mistake you will get finger prints or smudges permanently. So not a good idea unless you are one of those super careful person. http://www.ebay.com/itm/LG-Nexus-4-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
if you are handy, you can order the whole assembly online (amazon) for about 60 bucks or so) http://www.amazon.com/Touch-Screen-...r=8-1&keywords=nexus+4+lcd+screen+replacement
I personally got it replaced in So Flo for about 95 dollars + tax. I have been quoted about 140 at a chain fix up places.
bluesteve3 said:
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Click to expand...
Click to collapse
Sure they do. FYI, the "glass" is[ the digitizer. If "everything works", then technically all that needs replacing is the digitizer.
However, digitizer replacement is far from an easy thing to do. Not only does it require some specialist equipment (suction cups, heat gun, glue), you're probably going to screw it up unless you've done it before.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
You can buy just the screen assembly off eBay for about $45, which has the digitizer already mated with the LCD. However, this requires removal from the bezel (again, a heat gun is recommended), then gluing the new one back in. For $60 you can get the entire front assembly (hey, brand new phone!), which is the easiest way to go about things. I'd also recommend buying a new battery ($20) and replacing the old, tired one while you've got the phone apart.
It's not all that difficult to do it yourself. You'll need a T5 TORX driver, something thin, sturdy and plastic to pry the phone halves apart (you can buy screen assemblies that come with all these tools), and some patience. Do everything on a fluffy white towel so the little screws don't get lost. The tricky part is the little rubber gasket thingy that goes over the proximity/light sensor module. Most people who have done a screen replacement have found that reassembly screws up the prox sensor, causing it to always read "near" (meaning during a call the screen will stay off and you can't hang up or use the dialer). The common fix is to put the gasket in backwards.
There are a number of threads here, some youtube videos, and a good teardown tutorial on ifixit.com.
I thought the digitizer was what recognized touch input? Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
wareju said:
I thought the digitizer was what recognized touch input?
Click to expand...
Click to collapse
It is. It's built into the front panel of glass (which is made up of a bunch of different layers of stuff). Don't ask me how it works, it's all magic to me. But when you break the front glass, yet everything still works, that's the digitizer. If you look up digitizers on eBay you'll see that it's the front glass panel, with a cable and other electronic stuff attatched.
Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
Click to expand...
Click to collapse
It's honestly not all that difficult to do yourself. Hell, send me the phone and screen assembly, and I'll do it for free. Seriously. I'll even through in a couple TPU cases I'm not using.
If you do take it somewhere for repairs, make sure you ask what they're doing. Replacing the screen assembly, or replacing the digitizer. For a $100 fee, it could be either. They could buy a $20 digitizer and the remaining $80 is in labor, but it'll take them a lot of time and effort, or it could be a $45/$60 screen assembly that takes far less time and effort to do. Personally, it costing the same, I'd rather have the screen assembly replaced, since replacing only the digitizer can lead to complications. Since it has to be reglued onto the LCD, you might get bubbles, dust/lint, dead spots, and that rainbow affect when you hold it in the light at the right angle.