Touchscreen/Digitiser replacement, TYPES? - 8525, TyTN, MDA Vario II, JasJam General

My screen's working great, and always has. However, I was looking to replace the outer touchscreen, (so not the full thing) as it's got a few scratches and theres a bit of dirt under it somehow. They are pretty cheap in comparison to a full screen, and I have opened my device before to replace the front speaker. How difficult is replacing this touchscreen? Also, one of the listings I found talks of 2 types-I've no idea which I have, as others say they work with all.
Here's the link to the ebay page.
http://cgi.ebay.co.uk/I145-Touch-Screen-Pad-blk-for-HTC-Tytn-P4500-O2-Trion_W0QQitemZ260190001334QQihZ016QQcategoryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Mine is an SPV M3100.
Thanks.

Related

Cost of Screen Replacement?

Hey fellas... I think this is my first post here. Been here so long I don't even remember.
Well I have a K-JAM... I made a mistake of not buying a screen protector at the shop. It's been about 3 months now and depite very careful usage, there are quite a few scratches on the screen. I was wondering how much it would cost to replace it.
Do I have to replace the entire screen or is there some kind of sheath over it that can be replaced hence minimizing the cost?
Any inputs would be appreciated.
Thanks
Do a search on Ebay, there's a few listed there. Seems that just the touchscreen (top part, the one you probably want) is around $35, touchscreen+LCD is around $130.
I did a screen replacement on my previous phone, a SonyEricsson P800. The replacement itself was fairly easy (I replaced both touchscreen+LCD since the LCD was busted), but the touchscreen and LCD on that one were glued together forming one solid piece. Although seperate touchscreens were available for the P800 as well, there would've been no way for me to seperate it from the LCD without breaking the latter. It might be the same case for the K-Jam, forcing you to opt for the more expensive option. You'll just have to check first.
Also, have a look at the Service manual for more information, also about (dis-)assembling the K-Jam.
Goodluck!
Depending upon the depth of scratch, have you tried a repair fluid and polisher?
There is a website in the UK www.mobilefun.co.uk that sell just a solution! No pun intended. For a few pounds it might be worth a try (or dollars depending on where you buy!)
Wow... thats fantastic... I hope it works... the Repair fluid that is.
@Juicey... I cheked it up.... but like most screens, this one seems to have the touchscreen sheath glued hard to it. So i guess that's out of the question.
@BMS_Ian... has anybody around here actually had any luck with these repair fluids?

Screen cracked, looking for a replacement

Hey,
My HTC Universal screen just cracked, surprisingly without any outside intervention. It was ok this morning and was sitting on my desk. When some friend called me and I picked it up the whole upper screen was cracked. Weird.
Anyway, it's time to replace because I really like this device. So I was looking on ebay and found some sellers who will send it for around 130$-140$ USD. I was wondering if there are some cheaper sellers available outside of ebay that I couldn't find.
Also, maybe someone has a broken Universal with a working screen. My device is missing the front plate (where the IR) and I could always use the extra parts.
Thanks!
- Yaniv

Busted Outer Glass of LCD

Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.

Cracked screen - screen protector

Hi all, I cracked the screen on my HD2 a few days ago and have been eagerly reading the reports of how to replace the digitiser, etc. I'm working up the courage (and getting the tools) to do it, but in the meantime the digitiser and screen are perfectly functional, if a little bit unsightly. I thought I'd get hold of a screen protector in the meantime so I don't end up with bits of glass in my fngers, etc. Any recommendations of a form fitting protector (or form fitting case) that would fit the bill? Ideally it would cover the bezel around the buttons too, because one corner of it is quite chipped. The pics on ebay are kind of hard to tell from. Any advice much appreciated!
I might be too late as you mentioned that you already getting the tools to fix it yourself. There are specialty repair shops that fix screens, I heard they are not too expensive. I don't know the exact price, but someone with a broken nexus one got his phone fixed this way. Do you mind telling how you cracked your screen, was it your negligence or is it too fragile?
I'm not looking for info about how to repair - I've read those threads. I'm interested in the best temporary fix for the meantime.
The cracked screen is largely due to negligence... dropped it outside. Woulda been nice if the phone was a little more sturdy, but can't expect much better. And thank God it still works just fine as far as I can tell. Gonna be more careful now...

[Q] Which digitizer for my HD2 and where from?

I've successfully taken my HD2 apart now I'm not sure about the digitizer I need. My phone doesn't have a T-Mobile logo and it came with the leather pouch which I read means it's not the T-M version.
I'm looking for a new digitizer and the one that looks like the connector would fit says it's for the T-M version. Rather than go on about it here is a pic of my digitizer. I'm in the UK so if anybody has shopping suggestions I'd be grateful.
Ty
hypertyper said:
I've successfully taken my HD2 apart now I'm not sure about the digitizer I need. My phone doesn't have a T-Mobile logo and it came with the leather pouch which I read means it's not the T-M version.
I'm looking for a new digitizer and the one that looks like the connector would fit says it's for the T-M version. Rather than go on about it here is a pic of my digitizer. I'm in the UK so if anybody has shopping suggestions I'd be grateful.
Ty
Click to expand...
Click to collapse
I can't say too much based from picture posted above ...
It could have already replaced unbranded digitizer or it's Telstra, European, Taiwanese version... Are the call and end buttons colored on your phone (green and red respectively)?
If You have enough money, about 89-120$, better choice will be to buy a LCD+digitizer assembly also named LCM, they will work at all versions of HD2, not only T-mobile or European, I tested the LCM from European HD2 with in a T-mobile version of HD2 ant it works perfect. So go on eBay.com and buy one
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Clarification
hypertyper said:
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Click to expand...
Click to collapse
Let me help you:
#1.your picture is defining an uncommon/unbranded TMO(bile)US touchscreen(No doubt about, at least for me!), but grey hardware keys are for international HD2 model, probably you have a (let say) hybrid (home made)version between american(TMOUS) and international model;
#2.nevertheless, in your financial position, I'll look on ebay for an appropriate touchscreen model(there are plenty, most of them with very clear pictures like your's) for about US$30-40;
#3. if you want a combo, as far as I know(and pvii already said it) the 2 LCMs are geometrically identical, but the frame/chasis on which lay on the LCM is different(the american model is longer on 2,0-2,5mm);
#4. international model is cheaper & easier to find.
For more informations/help feel free to contact me!
Cheers!
hypertyper said:
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Click to expand...
Click to collapse
May be it will be better if You post a photo of rear side of your display or at least say it's product number (from sticker on square copper pad, rear side), i.e. P/N:60H00300-00P is for T-Mobile and P/N:60H00295-00P is for international version.
If You don't have enough money for a european LCM combo, you can buy a LCD apart and digitizer apart, even from different sellers but you have to buy matching parts, both for European or both for T-Mobile version.
Thanks for the info guys. The serial number is the kind of solid identification that I was looking for. The serial on my screen ending in 300-00P indicates that it's the TMobile version.
My theory is that since this phone was bought when it wasn't exactly new on the market HTC had switched to the solderless screens which seem more modern?!?
I'm assuming that in terms of connection the digitisers that look like they will fit in terms of connection should work. I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Since I can't find anything else on ebay I guess I'll order one of the TMobile ones and see if it fits. I'll look for a shop with return policy just in case.
Thanks for the help. If anybody has further suggestions I'd love to hear them.
[/QUOTE]I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Thanks for the help. If anybody has further suggestions I'd love to hear them.[/QUOTE]
Read carefully my previous post:
you don't have to be worry, the touchscreen, lcd and lcm are geometrically (length x width) identical!
I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Thanks for the help. If anybody has further suggestions I'd love to hear them.[/QUOTE]
Read carefully my previous post:
you don't have to be worry, the touchscreen, lcd and lcm are geometrically (length x width) identical![/QUOTE]
Yupp, any LCM will fit on any model of HD2.
I wasn't sure which part was identical but if the digitizers are then what I ordered should do the trick. Digitizer should arrive this week so hopefully I'll have something to report about
edit: Digitizer arrived and fits perfectly. I guess my phone was some weird mutation. Solution is to just buy a digitizer with the correct connection, job done.
Oh and getting the right tape is a total *****. I had to take everything apart again because my tape wasn't strong enough!
I thought I'd post my findings and produce some cliffnotes on how I fixed my HD2.
Firstly, if you search youtube for "leo as" and "leo dis" you will find the official HTC videos on how to assemble and dis-assemble the HD2. They make it look easier than it is. Also, they don't separate the digitizer from the screen.
I ordered the tools to "dis" off ebay. Especially the T5 screwdriver was worth getting since it allowed me to find out which digitizer I need. I have a non TMobile version but needed the TM digitizer.
I found that using an old credit card type of card works very well for taking the phone apart. It can reach further into the phone and bends rather than breaking like some of the cheap tools from ebay.
Especially for separating the digitizer and screen it's great. I heated up the digitizer & lcd combo in the oven for a couple of minutes like the video advertised for taking the middle part of the phone apart (you'll see in the vid). Here comes the interesting part: Instead of sliding the card / tool all the way across the screen (between screen and digi), it's enough to just separate it around the edges. There is no glue or adhesive in the middle. It seems obvious now but I got lots of glue all over the LCD which was a bit** to clean.
Another tip that is worth repeating is getting the cheap double sided tape from ebay which is meant for Iphone digitizers (3M branded). I got three of them for £1 incl delivery. I used it to put the "middle" of the phone together. Screen and digi I did with cheap double sided tape which is working but I regret somewhat.
Another tip would be the whit cable (flash?) which goes on the bottom of the mainboard. I put it on top to start with. It's easy to mix up. Also it makes sense to put one end on before you put down the mainboard because that way you still have proper access.
Make sure you have good tape and be patient. I had crap tape and just slammed things together because I was so keen to see if the phone still works. I had to take it all apart again which almost broke the phone because it was coming apart in all sorts of places.
Overall it's like a big, fragile puzzle. I got the phone from a family member who had dropped it so all I had to get was the digitizer and tape. Now I have the best phone that ever lived
If anybody has questions, I feel like I know the hardware of the HD2 inside out.
I also took mine apart to replace the digitizer. I haven't got the new one yet though. I also watched the take apart vid on youtube. Unlike you I didn't disconnect the white wire from under the board. As a matter of fact, I left the other wires attached to the mainboard and just disconnected them from the GPS, camera and Bluetooth boards. At the end of the little channel that the wires are in, there was a little metal tab that held the wires in place. I just bent the tab up to remove the wires. Like you I used a piece of credit card to loosen the glued pieces.

Categories

Resources