Related
Cliff Notes, i saw this thread on the update to DG27, but I need to know if there is a short cut to get to the newest build or if Froyo will be unable to get without the playing catch up
I did some searching, but if you can forward any information there is about this, that would be helpful and a moderator can delete this...
I looked today at my gf/s epic and noticed she was on build version DG17, and from what I understand, this is old. I cannot find anything on the sprint website found here, so I took er to the sprint store for an update, and all these dolts kept saying is Froyo is not out yet, you need to wait, not listening to anything I was actually saying. After they began to listen they said she is literally stuck, SOL with the version she has until Froyo is released for her device, and that Sprint and Samsung have no updates for her device. Furthermore, whenever I check for an update on her device it always says it is up to date. So, after getting annoyed I came here for help.
I did read somewhere on this forum that being on the older build version causes issues with future updates. If this is true, will she be able to get Froyo if it ever comes out, and is it a good idea to to the updates in between (S:D700.0.5S.DG27 8/30/2010, S:D700.05S.DI07 9/16/2010, S:D700.05S.DI18 9/30/2010, etc), and, if it is possible to manually update the Epic, how does one do it? Once the morons at the sprint store started listening they said There was nothing I can do but wait for Froyo, but I did not instill much trust in them.
Thanks,
Carl
P.S. Please don't flame me, I know very little about the Epic and even less about working with it, but I am capable of doing the update, with your help, of course.
Here use this. Use Odin to go to di18 which is where she needs to be to get froyo ota. Unless you want the leak which works great for me it's dk28. http://forum.xda-developers.com/showthread.php?t=794138. Yeah for some reason you are still on the launch day software. You are 3 updates behind. Use that link to dl Odin and download whichever rom you want dk28 for 2.2 or di18 for 2.1 and use Odin to flash. You will wipe all data and it will be like getting a brand new phone. Just follow the instructions exactly how they are written. Good luck.
you can update your epic regardless of what version you're on to the current official build (DI18) which is "Eclair" and fixes many of the original issues with the phone. You you can also go straight to an update to the newest unofficial build (DK28) "Froyo" but this will make you unable to receive the official Froyo OTA update. But take note that the OTA update is not important as the developers on this site will most definitely provide superior alternatives to updating to Froyo when the OTA update eventually does become available (it has been delayed yet again).
THIS WILL DELETE ALL THE DATA ON YOUR PHONE
*Assuming that you want to return to the current official build used by sprint which is at this moment DI18*
*Only use main/direct-to-motherboard USB slot on PC (not on the face of your PC)*
*Only use high quality USB cable shorter than 3' and not the stock cable*
*Make sure SAMSUNG USB drivers are Installed*
*Make sure your battery is more than 50% charged*
1. SD Card is REMOVED, USB is UNPLUGGED and Battery is REMOVED from phone
2. While Phone is UNPLUGGED from USB, place battery in phone
3. Press and Hold the "1" key and Power button together to reach Download Mode
*KEEP USB UNPLUGGED FROM PHONE and phone in Download Mode*
4. Extract and Run Odin3.exe (Ignore the .pit file included in Odin3+v1.61andepic.pit.zip)
*Leave the "PIT" selection empty*
5. In Odin Uncheck "F. Reset Time", make sure "Auto Reboot" is the only box checked
6. In Odin click PDA and select your .Md5 file (SPH-D700-DI18-8Gb-REL.tar.md5)
7. Plug USB in PHONE and wait for yellow COM box highlight to appear in Odin
8. In Odin Press Start and WAIT patiently
Download SPH-D700-DI18-8Gb-REL.tar.md5 from the link on the first page of this thread where it says DI18 Update:
http://forum.xda-developers.com/showthread.php?t=794138
Download Odin from the link on the Wiki --look for "Odin3+v1.61andepic.pit.zip" under where it says "Odin Stock Flashing" at:
http://forum.xda-developers.com/wiki...Stock_Flashing
Download Samsung USB drivers from the link on the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=770388
so either way she cannot get it re sync'd back to do it on its own? is that what I'm gathering? I hope that is untrue. And either option she has to wipe her phone? The people at sprint said wait for Froyo but she needs to get to DI18? This is all a bit confusing.
cabrone1 said:
so either way she cannot get it re sync'd back to do it on its own? is that what I'm gathering? I hope that is untrue. And either option she has to wipe her phone? The people at sprint said wait for Froyo but she needs to get to DI18? This is all a bit confusing.
Click to expand...
Click to collapse
Without DI18, you won't be able to get the OTA for DL11, which is final froyo. You will have to use odin, and yes it will wipe the phone. Just backup contacts to your Google account and use Titanium Backup for the apps.
Sent from my SPH-D700 using XDA App
thomasskull666 said:
Without DI18, you won't be able to get the OTA for DL11, which is final froyo. You will have to use odin, and yes it will wipe the phone. Just backup contacts to your Google account and use Titanium Backup for the apps.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
This isn't entirely true.
There will be an update for DI18 -> DL** out soon-ish. However, an update from DG27 and whatever the other one is will be available *eventually*. How long eventually is unknown and could be forever.
I thought there was a di18 update zip floating around here that he can flash threw the stock recovery?
What I suggest is root the phone in question and install clockwork mod recovery. One cwm is installed you can make a nandriod back up. Use odin and the di18 tar to get to di18. Root and install cwm again. Restore tory back up with selecting data only. Now your up to date with apk your data. You are also rooted and have cwm installed and you won't be blocked from an ota unless you start flashing custom roms and removing stock apps
Sent from my SPH-D700 using Tapatalk
You can have her phone on di18 in five mins. Them it would take her no mre than ten mins to set it back up. All her contacts are saved and all she has to do is reinstall her apps. It doesn't take that long. Plus the update to di18 update takes the upload cap off.
DevinXtreme said:
This isn't entirely true.
There will be an update for DI18 -> DL** out soon-ish. However, an update from DG27 and whatever the other one is will be available *eventually*. How long eventually is unknown and could be forever.
Click to expand...
Click to collapse
Very true, eventually being the key word lol. If you do want the OTA right off the bat though, DI18 is the way to go. Mystery, I thought I saw that floating around as well, I just worry about the Modem.bin being flashable in clockwork; as of yet I don't know if anyone has been able to accomplish that. But with Koush's help it could be possible.
Sent from my SPH-D700 using XDA App
Isn't DG17 to di18 just a firmware update? You only click android update in the settings when going from android 2.1 to 2.2 (software update). I don't think he needs to go to the trouble of using odin.... I could be wrong but its give that a try if you haven't already.
Sent from my SPH-D700 using XDA App
Shadomastr said:
Isn't DG17 to di18 just a firmware update? You only click android update in the settings when going from android 2.1 to 2.2 (software update). I don't think he needs to go to the trouble of using odin.... I could be wrong but its give that a try if you haven't already.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Of you read his post right you would realize he is on dg27 witch was the release firmware. He is 3 updates behind do clicking on check for updates will not work and amazingly he already tried that already
Sent from my SPH-D700 using Tapatalk
Yeah what he said. ^^^^^^^
mysteryemotionz said:
I thought there was a di18 update zip floating around here that he can flash threw the stock recovery?
What I suggest is root the phone in question and install clockwork mod recovery. One cwm is installed you can make a nandriod back up. Use odin and the di18 tar to get to di18. Root and install cwm again. Restore tory back up with selecting data only. Now your up to date with apk your data. You are also rooted and have cwm installed and you won't be blocked from an ota unless you start flashing custom roms and removing stock apps
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Does anyone know of a step by step instruction for this? thanks!
musclehead84 said:
You can have her phone on di18 in five mins. Them it would take her no mre than ten mins to set it back up. All her contacts are saved and all she has to do is reinstall her apps. It doesn't take that long. Plus the update to di18 update takes the upload cap off.
Click to expand...
Click to collapse
What is the upload cap? My phone is currently rooted and with CWM but still at DG17. Thanks.
Will DG17 prevent Froyo? At this point you first need to worry about Sprint and Samsung preventing Foyo and at the moment they are doing a very good job.
juejaimon said:
Does anyone know of a step by step instruction for this? thanks!
Click to expand...
Click to collapse
Please see timothylaws post on page one of this thread or if you want to watch a video I don't have the thread handy but it is courtesy of Randyshear on Youtube. I hope I don't get in trouble for saying this but I would suggest subscribing to his youtube page. He is very informative.
musclehead84 said:
You can have her phone on di18 in five mins. Them it would take her no mre than ten mins to set it back up. All her contacts are saved and all she has to do is reinstall her apps. It doesn't take that long. Plus the update to di18 update takes the upload cap off.
Click to expand...
Click to collapse
please help. LOL. I Wonder if it is something sprint can handle once froyo is the standard for the epic and i show them she does not have it, can they just push it on to it? If not, i'd love to have instructions or something from you, please
Update. So after the rumors of the upcoming froyo release, can sprint push it when the device does not get the triggered update? Or can the morons at the sprint store do this?
Sent from my EVO using XDA App
Ok i've searched the forums and am getting more and more confused. I have gingerblur 3.1 installed currently and would like to do the ATT ota update. Can I just download it and install from the system update? Or do I need to wipe the whole phone clean and start over? Thanks and sorry if this is a duplicate.
I am wondering this too...
Sent from my MB860 using XDA Premium App
I'm in the same boat, I got GingerBlur 4.5 installed and I would like to install the Gingerbread 4.5.19 OTA update. Are there proper instructions out there? I can't find any. I'm assuming I may have to go back to Stock 1.8.3 and do an OTA update. But can someone please confirm. Any instructions would help as well. Thanks
The directions I seem to need are...
Un gingerblur
Un root
As an aside, I got notified of the ota and it failed.
Sent from my MB860 using XDA Premium App
goofyj8 said:
I'm in the same boat, I got GingerBlur 4.5 installed and I would like to install the Gingerbread 4.5.19 OTA update. Are there proper instructions out there? I can't find any. I'm assuming I may have to go back to Stock 1.8.3 and do an OTA update. But can someone please confirm. Any instructions would help as well. Thanks
Click to expand...
Click to collapse
Make sure your battery is fully charged so that you don't run out of power during the upgrade process.
To install the upgrade:
Copy the file to the SD Card
Your phone is on the latest Android 2.2 software (Blur_Version.4.1.83.MB860.ATT.en.US)
From the home screen, press Menu, select Settings,
Scroll down and select About Phone.
Select System upgrades.
After a couple of minutes, your device will confirm the upgrade is available.
The Copy prompt will appear. Select “Copy”
The Install upgrade prompt will appear. Select Install Now.
Your device will power off and display installation progress.
IMPORTANT INFORMATION:
Please ensure you are aware of the following information after the installation of the package
It will then power up and stay on the carrier logo for up to 5 minutes before powering on to the home screen.
Please do not interrupt this process.
Contacts and email from Google and MOTOBLUR may take up to 60 minutes to synchronize. The phone may appear slower during this initial synchronization process
I am in the same boat as that guy with gingerblur 4.5 .
I don't have an sd card around me atm so would putting the file on the internal storage work or not?
ALSO if I update this way, will it delete all of my media and apps? thanks
ota update to gingerbread
damonsmith666 said:
I am in the same boat as that guy with gingerblur 4.5 .
I don't have an sd card around me atm so would putting the file on the internal storage work or not?
ALSO if I update this way, will it delete all of my media and apps? thanks
Click to expand...
Click to collapse
please just wait for a dev to answer this question or we may brick or worse lose root forever (ohh noo) seriasly just be calm a work around will be comming soon
I will wait...
Sent from my MB860 using XDA Premium App
same issue here
i tried to install the OTA update, it failed... tried to install it manually and it didn't work either. i tried to install it using android recovery and it didn't work.
Im using gingerblur 4.5
side note,
can any one of you please provide the full name of your system version? mine says "Version.4.1.83.MB860.ATT.en.US ", thing is, I tried to flash a stock sbf to roll back to motoblur, RSDlite fails every time with a message "sec_exception febe 35 35", my phone isn't recognized as 'NS Flash Olympus', it shows 'SE Flash Olympus'.
is there a thread to fix this issue?
thanks!
I figured out how to do it. First I unlocked the bootloader and then followed the directions on here.
http://forum.xda-developers.com/showthread.php?t=1163342
Worked fine
You need to flash back to stock, i.e. flash 4.1.26 or 4.1.57 or 4.1.83. OTA update to 4.1.83 if you are on an earlier version. The update will not work if you are modded in any way. You need to be on stock 4.1.83.
My god, how many times does this have to be said!!!
So let's just say that you are a moron (like me) and just did the OTA over Gingerblur 4.5 and now you have the exclamation point triangle and android on your screen and it does do anything... is it safe to battery pull? or did I just brick my phone?
EDIT: nevermind...
Is there any guide how to flash back?...
Sent from my MB860 using XDA Premium App
Well you could use rsd if you've never installed the GB ota.
Sent from my MB860 using XDA Premium App
Update, now problem
I was on gingerblur 4.5, rooted, sideload enabled.
used RSD to flash 4.1.83 - successful - booted - checked mail - etc...
went to Motorolla.com and DL the official firmware
copy .zip to sd
settings/about/upgrade
let it run
followed instructions to the letter from Motorola
30 minutes now on the Rethink Possible screen - seems like a fail?
Help?
Update - she lives, just needed to wait about 45 minutes
This thread is no longer valid or necessary other than as a guide on how to use Odin. U.S. users that are bone stock should be able to apply the update via OTA or Kies. If anyone's having an issue they can install the U.S. JB ROM by using Odin to manually replace their current U.S. ROM with a completely new copy of the U.S. JB ROM.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Basically what you’re doing is replacing your current PDA (MD5) file with the U.S. 4.1.2 version that's just been released.
To install a ROM it's easiest to use desktop Odin. You can download Odin 1.85 here…
https://www.google.com/search?q=odin+1.85&sourceid=ie7&rls=com.microsoft:en-us:IE-Address&ie=&oe=
Make sure you’ve got Kies installed on your PC because it installs the Windows drivers necessary for Odin to see your device.
Download the full and complete U.S. 4.1.2 JB ROM here…
http://hotfile.com/dl/189276711/f83...GT-N8013-XAR-N8013UEUCMA3-1357740396.zip.html
Unzip the file you downloaded. After it's extracted you should see an MD5 file. That's what you're going to install. Right-click on the Odin EXE file you downloaded and run it as administrator.
Put your device in to “download mode” by turning it off and then restarting it by pressing the power and volume down buttons at the same time. You should see an “are you sure?” message from Samsung. Accept it and your device is now in download mode.
Connect your device to your PC via USB. If the connection’s successful it should look like this…
Next, click on the PDA button and locate the file you extracted and then click start...
You’ll see the update’s progress in the message box in Odin and via a progress bar on your device. When Odin signal’s it’s finished disconnect your device and it will finish installing the new files.
That's it. Your N8013 is now running a fresh install of 4.1.2.
These are the directions I followed - many thanks!!
So, it's confirmed that it won't affect the flash counter for sure? I'm thinking of using the All-Share Cast dongle in the future and it exhibits some strange behavior if the flash counter hasn't been reset...
Will this work on n8000?
Sent from my GT-N8000 using xda app-developers app
Yes it will work the same for all note models but you need to make sure have the firmware for that particular model.
No it will not change your count, you can install stock roms of any regions as many times you want it will not change the count.
Your count will change when you root it or install a custom rom you can easily reset the flash counter
It seemed so simple...followed instructions to the tee. I just got status 7 error. Failed when I tried to flash update.zip from external SD card. Now s note is fc every second. I might have to go return my tablet tomorrow any ideas or help? I am not new to flashing roms but I haven't ever seen this.
Sent from my SPH-L710 using xda app-developers app
Flashing OTA is always tricky, think you were flashing a zip file I would not recomend it.
Also make sure the OTA is for the same version an region as your rom is otherwise it will give you errors
Did you download the N8010XXALI3 version or the N8010XXALGC version as there are two German versions in that list.
Not sure if that would make a difference.
GETCASHMONEY said:
It seemed so simple...followed instructions to the tee. I just got status 7 error. Failed when I tried to flash update.zip from external SD card. Now s note is fc every second. I might have to go return my tablet tomorrow any ideas or help? I am not new to flashing roms but I haven't ever seen this.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No need to return, go back into recovery and clear the cache. Then reinstall the update. Boot into your tab, it might be a bit laggy at first but let it sit for about 5 minutes DON'T TOUCH IT. Reboot the tab and it should be fine. I had a similar issue, my tab is now flying along. For any fc you get, go into the app and clear all the stored data. IF it continues uninstall and reinstall. Remember, you are going from ICS to Jelly Bean, some apps act differently in Jelly Bean.
Riki
Just to be safe I assume I will be ok if I am rooted and dont have stock recovery. I will just have to reroot. Correct?
After you flash the German stock ICS with Odin you will get back the stock recovery.
Sent from my GT-N8010 using Tapatalk 2
When the official UK one comes out will it be easy to change to that if needed?
Yes. 2 options :
Get back to the stock ics for your region, and wait for samsung ota or
Download jb stock fw for your region from sammobile and flash with odin
Edit: assuming that you are from UK.
Sent from my GT-N8010 using Tapatalk 2
Well I'm currently updating to JB via sd card. However it has been on "Patching remaining system files" for about 15 minutes.
How long should it take?
neonplanet40 said:
Well I'm currently updating to JB via sd card. However it has been on "Patching remaining system files" for about 15 minutes.
How long should it take?
Click to expand...
Click to collapse
Mine seemed to take a few minutrs. After the progress bar on the tablet seemed to stop, I unplugged and held the power button down to reboot. Holding down the power button while holding volume up will eventually boot you into what is called recovery mode. You then select what you want to do by clicking vol up or down to select then push power button to proceed.
Let it finish... even if you have to wait 30 min
Sent from my GT-N8010 using Tapatalk 2
Well, I stopped the fc by clearing s note data. Thanks for the help. I'm still stuck on ics though. When I try to flash update.zip it fails to get build.prop sector 7 or something. I transferred it around a little before installing - it could be corrupted. I am going to re download it directly onto my tablet and try again. Thanks everyone for your help, I really appreciate it.
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 08:33 AM ---------- Previous post was at 08:21 AM ----------
mikemod said:
Did you download the N8010XXALI3 version or the N8010XXALGC version as there are two German versions in that list.
Not sure if that would make a difference.
Click to expand...
Click to collapse
I actually did download the wrong dbt one. I'm downloading the other one to give it a shot.
Sent from my GT-N8010 using xda app-developers app
I got it to work. Thank You for Your help. Jelly Bean is crazy fast I love it!
Sent from my GT-N8010 using xda app-developers app
GETCASHMONEY said:
I got it to work.
Click to expand...
Click to collapse
What do you think happened that made it not work at first and what did you do to fix it? I want to keep the first post updated so people don't brick their devices or have heart attacks during the process.
Will it be possible to download JB update it directly to my tablet without an external SD card?
Hi to all. This is a very simple guide to revert back to the Stock rom that came with your phone.
Odin is not needed, also no special skills needed. All you need is a PC with Samsung Kies installed.
Kies is best to be updated to latest version. latest one is 08-01-2013
So, let's start. If you were rooted and the custom binary counter has increased, please use TriangleAway prior to this guide.
1-) Open up Kies with phone disconnected, but keep it powered up cause you will need it for the serial number.
2-)Navigate here (tools) (picture 1) and select the 3d option (software upgarade and preparation). you will get this Enter GT-N7100 press confirm.
3-) enter your phones serial number(picture 3) wich you can find either under the battery or by navigating to yout phone Settings- About device- Status- Serial
Number. Press confirm. after pressing confirm you will be presented with a dialog which lets you know that the device will be wiped. Press Confirm again.
4-) you will now be presented with the version (picture4, it is for my phone. you will have maybe other) that is the latest for your phone and your serial number. press confirm and wait for the first download (picture5). wait till it finishes.
5-)in the next screen (picture 6) read and select Agree. put your phone in download mode by pressing volume down+ home button+ power on. do not release the buttons till the phone is in the screen that tells about warning. press volume up.
connect phone to PC and press down at Start Update button.
this will take a while to download cause the update is about 1GB.
wait till it finishes and phone boot up.
Set up as usual.
Hope it helps.
Wow, thanks!
I hust have a question about this, for example, if i ever want to rollback to carrier stock ROM, i should follow the steps above? If we do this, are we going to enable OTA carrier updates as long as we don't root the phone, right?
Thanks!
luismedina said:
Wow, thanks!
I hust have a question about this, for example, if i ever want to rollback to carrier stock ROM, i should follow the steps above? If we do this, are we going to enable OTA carrier updates as long as we don't root the phone, right?
Thanks!
Click to expand...
Click to collapse
you are correct. in both questions:laugh:
Do you think this procedure would work with a Note 10.1?
Ive triangled away, so the download screen says its official
But its still rooted, this seems a very simple and effective way to remove all traces of changes
Blackhorse said:
Do you think this procedure would work with a Note 10.1?
Ive triangled away, so the download screen says its official
But its still rooted, this seems a very simple and effective way to remove all traces of changes[/QUO\
it should worl in your tab too. it was the same for S3 and S2.
it is like restore function in Itunes but a bit under disguise :laugh:
Click to expand...
Click to collapse
mariosraptor said:
Blackhorse said:
Do you think this procedure would work with a Note 10.1?
Ive triangled away, so the download screen says its official
But its still rooted, this seems a very simple and effective way to remove all traces of changes[/QUO\
it should worl in your tab too. it was the same for S3 and S2.
it is like restore function in Itunes but a bit under disguise :laugh:
Click to expand...
Click to collapse
Will this work coming from a 4.2.+ CM / AOSP based ROM?
Click to expand...
Click to collapse
It will work coming from any rom. Just backup, backup, backup your personal data. It will wipe internal sd.
Sent from my GT-N7100 using xda premium
mariosraptor said:
It will work coming from any rom. Just backup, backup, backup your personal data. It will wipe internal sd.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks... This is good to know. Question though... I live in Canada and my device was a UK version that I bought from a store here in Edmonton, Alberta. That being said... Will Kies be able to find my proper STOCK firmware given my location or does it find it based soley on the serial number?
It finds it base on serial number. If is is a UK device it will install the latest one for the specific serial number and UK.
Sent from my GT-N7100 using xda premium
Great guide but i still have a question!
Q- Should i flash stock recovery prior to following this procedure? or will KIES do it for me?
sda.171 said:
Great guide but i still have a question!
Q- Should i flash stock recovery prior to following this procedure? or will KIES do it for me?
Click to expand...
Click to collapse
Kies will
Sent from my GT-N7100 using xda app-developers app
anyone on windows 8 having trouble with this? program stops responding after downloading the initial upgrade components (step4)
this might be the final push for me to go back to win 7
sda.171 said:
Great guide but i still have a question!
Q- Should i flash stock recovery prior to following this procedure? or will KIES do it for me?
Click to expand...
Click to collapse
no. Kies will do it.
danfozzy said:
anyone on windows 8 having trouble with this? program stops responding after downloading the initial upgrade components (step4)
this might be the final push for me to go back to win 7
Click to expand...
Click to collapse
Sorry. Not using win8
Sent from my GT-N7100 using xda premium
just a heads up that you cant do this on a mac, the option isn't in the tools menu
What does the serial number look like? I've tried every number on the back of the battery and on the box!!!
It is like S/N: 8BC6738BSH
It is under the imei
Or settings-about phone-status
Sent from my GT-N7100 using xda premium
Would this method work in restorin my UK S3 back to stock please? It was originally a '3' branded phone tho, not sure kies would install that, sorry to sound totally silly, just not familiar..thanks!
Yes it will restore to what it had out of factory.
Sent from my GT-N7100 using xda premium
YOU ARE A LIFE SAVER
Great guide Marios!
Very usefull for everyone, especially some users like me who have never seen kies ui to know about....
So, now i found a reason to use Kies one day....
I apologize in advance if this has been answered or if I have inadvertently offended. I did watch the video and have developed OSes for 30 years. I also have searched all over this site and the web for resolution and am making no progress, so I'm asking the 'oracle'
Got an ATT S4 (I337) a week ago - it was running UCUAMDL. I rooted it using Motochopper and was happily using Titanium Pro etc. I get notified of OTA update. OTA update downloads (357MB) yet fails during install at 30% consistsently.
I figure it is unhappy with my root - I unrooted and cannot remember which way I did it - I seem to recall SuperSU I was using did not have the built-in 'unroot' support so I grabbed the stock image and used ODIN to flash it.I also may have manually uninstalled the 'normal' way the SU app - I suspect this may be my real problem.
After flashing stock ROM for UCUAMDL phone was no longer rooted, did not say custom etc, and took the OTA upgrade just fine. This was for UCUAMF3 which did add App 2 SD support - BTW this update used another 1G of storage compared to UCUAMDL, and I could not recover the 1G by moving apps either, making it virtually worthless as far as adding support for apps in SD, lol.
The problem is now I cannot seem to get the device rooted again. Motochopper fails when installing su.apk. I suspect I have screwed the pooch - what do I need to do to get this thing rooted again?
Is it typical for an OTA update to fail 'because' the device is rooted?
Any advice is much appreciated.
You can't root mf3. You never should have taken the update if you want to be rooted. Cross your fingers that someone finds a way to root the update but I'm not sure you should hold your breath.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
So is doing a stockrom restore back to MDL an option? Then just root that with Motochopper? And disable OTA updates till its figured out?
The real joke here is that to get their built in app-to-sd functionality they give you an update that hogs up another 1GB!
Nope. Can't go back. Just gotta wait it out. Cheers
Just curious if you don't mind - WHY can't you go back? (Ready for the explanation based on perms and su etc, lol) Or flash stock ROM and factory reset etc?
TheKog said:
Just curious if you don't mind - WHY can't you go back? (Ready for the explanation based on perms and su etc, lol) Or flash stock ROM and factory reset etc?
Click to expand...
Click to collapse
A qfuse is blown when you take the update. It won't let you odin or anything else to go back to an earlier firmware.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app