Database Users

People with hardware locked vibrants..

What can we do? I dont want to mess with anything again because i know if anything goes wrong i cant get in to download mode.. But i too want to flash the new roms and gps fixes. Is there anyway to make the hardware buttons unlocked?

Why not use adb? I used it and Odin for the first time two days ago flashing this new patch and it was quite simple. I, like you, have a hardware locked handset. Let's hope it didn't take you nearly the same two hours that it took me.

You can root using clockworks and run some of the patch through clockworks too. Try not to use odin unless you really know what you're doing. A lot have odin hang on them. Other than that, you can flash rom using clockworks.
Sent from my SGH-T959 using XDA App

jonathan3579 said:
Why not use adb? I used it and Odin for the first time two days ago flashing this new patch and it was quite simple. I, like you, have a hardware locked handset. Let's hope it didn't take you nearly the same two hours that it took me.
Click to expand...
Click to collapse
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*

TWO HOURS! Lucky SOB, took me over 4 hours, but I was at work with nothing better to do then to play with it on and off, google some more, crawl xda, play some more....rinse repeat...
But I don't think there will be an official "fix" as in their eyes nothing is broken. It is as they intended. I'm not really sure if this move was by tmo or samsung, but regardless it's a PITA. I used ADB. The hardest part is getting the drivers in, after that it's easy cake walk thanks to the wealth of knowledge here at xda.

glensta said:
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
Click to expand...
Click to collapse
exactly my point. this is what happened to me. but think about this lets say i flash a rom right and you know how sometimes it hangs on the vibrant screen and just stays there. and in order to get it back i am going have to use odin. which i cant.......... so i think i wont mess with anything anymore. Rather just wait for official 2.2 ota update.

Chief Geek said:
TWO HOURS! Lucky SOB, took me over 4 hours, but I was at work with nothing better to do then to play with it on and off, google some more, crawl xda, play some more....rinse repeat...
But I don't think there will be an official "fix" as in their eyes nothing is broken. It is as they intended. I'm not really sure if this move was by tmo or samsung, but regardless it's a PITA. I used ADB. The hardest part is getting the drivers in, after that it's easy cake walk thanks to the wealth of knowledge here at xda.
Click to expand...
Click to collapse
Take it back and do a warranty exchange cause the buttons arent working correctly.

I've never tried it because I could never get Kies to connect to my phone, but isn't there a way to update firmware through Kies? I know the i9000 guys use Kies to upgrade, but I think that's only to get drivers and the updates though. I wish Samsung had a better interface than Odin to flash firmware. It's absolute garbage.

Hello, I am new to this android stuff but think I may have a problem and no hardware keys may come into play.
I rooted my phone for no other reason than to remove bloatware
I removed what I new was safe and left alot on the phone just because I was not sure what to remove
Phone was working great and had no problems
I decided I wanted to do a factory reset to remove all my apps and user data etc.....
I did do a titanium back up of my apps so I could easily resinstall if I wanted
I did the reset and now as soon as the phone boots I get TWLauncher force close and just about any other app that tries to load just continuose force close loop
I did not remove the original launcher so I am not sure why this is happening but I cant flash since I cant get into download mode and I cant use ADB since my phone wont let me put into debug what to do?????????????

glensta said:
I received 1 of the new hardware-locked phones and used adb to get into "download mode" - but odin got stuck and I had to unplug the phone and tried plugging it back in and it didn't work. Once I took the battery out, I got the dreaded "phone to pc" icon. I tried a whole lotta combinations all read here on XDA - nothing worked. One I got that "phone to pc" icon - i was screwed. Adb doesn't work at that point.
Basically - I wouldn't use Odin with one of the newer vibrants - only update.zip stuff
*Just a suggestion*
Click to expand...
Click to collapse
This is how I got out of "phone to pc"
get into download mode (i went through it manually, as in plug in the phone, and pressing the volume buttons together at the same time)
Connected to ODIN, and by perfect accident, I clicked on "start" without placing ANY files in ANY spots.
This is what I thought "OMG $h!t" Well my phone was already bricked enough, so i just let it run its course through ODIN. My phone magically rebooted, and it booted into the ROM i had installed before I got the "phone to pc" problem.

Whats the disadvantage of having a hardware locked phone?
From what I'm reading i cant load custom roms? or can use Oden?
Also I just got mine and im sure its hardware locked but how can I tell
TIA

demo23019 said:
Whats the disadvantage of having a hardware locked phone?
From what I'm reading i cant load custom roms? or can use Oden?
Also I just got mine and im sure its hardware locked but how can I tell
TIA
Click to expand...
Click to collapse
The disadvantage is that it is harder (maybe impossible in some situations?) to get into the Download mode if something goes wrong during a ROM update. You can still load custom ROMS but if something goes wrong, you might not be able to get to Download mode to be able to fix it.
I had the phone ! PC screen on mine when I first tried to unsuccessfully flash Vibrant8. Luckily, my Vibrant doesn't seem to be hardware locked and I was able to get back into Download mode and re-flash it with Odin.

I'm able to access download mode with volume keys and i can access recovery mode so i guess im ok
also date on box is 8/27/10

How do you know whether you have a hardware locked Vibrant or not?

No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene

eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
I trust what you're saying.. but is there any way to test that out without having an already bricked phone? I want to make sure I can recover my phone before flashing your Vibrant hybrid ROM. So after Step 6 do you get the download mode screen? Or does ODIN now show a COM port and it works, even without the little digger guy?

eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
First off, absolutely no disrespect Eugene, you are an amazing developer and a HUGE contribution to this forum, I personally love your work and have tried many of your ROM's (actually looking at switching up to your newest hybrid rom next), but there are most certainly some of these phones that are hardware locked to the point that you can not get in to download mode, regardless of what you do. The steps you posted definitely work for some, and for non-hardware locked phones, they work beautifully, however, there are some phones that no matter what you do, no matter what order you do it in, you will never get in to download mode short of using ADB. The good news is, the lockout was not intentional, and exchanging your hardware locked Vibrant will generally result in a non-hardware locked phone (from mine, and many other's personal experience).

johnny12times said:
First off, absolutely no disrespect Eugene, you are an amazing developer and a HUGE contribution to this forum, I personally love your work and have tried many of your ROM's (actually looking at switching up to your newest hybrid rom next), but there are most certainly some of these phones that are hardware locked to the point that you can not get in to download mode, regardless of what you do. The steps you posted definitely work for some, and for non-hardware locked phones, they work beautifully, however, there are some phones that no matter what you do, no matter what order you do it in, you will never get in to download mode short of using ADB. The good news is, the lockout was not intentional, and exchanging your hardware locked Vibrant will generally result in a non-hardware locked phone (from mine, and many other's personal experience).
Click to expand...
Click to collapse
Download Mode is controlled by SBL, so if they truly changed anything that would be the cause.
I would think you could target redbend to update the SBL or even boot.bin bml /stl location.. I've not tried this, nor do I need too.. Just tossing options out there for people to try & don't mind risking a brick..
If you can get the SBL / Boot.bin for the Stock to flash via redbend, then this will solve the HW locks.. Now, Regarding my Phone, I can still get into Download Mode however, only by doing the USB trick &/or ADB reboot download.
I can not get into recovery unless I use clockwork Manager or ADB into
By the way, this is not a Hardware Lock issue as the thread states.. Not being able to get into download Mode like described, is a zImage issue & not the SBL / BOOT.bin
just as a FYI.
~Eugene

Hello, I am new to this android stuff but think I may have a problem and no hardware keys may come into play.
I rooted my phone for no other reason than to remove bloatware
I removed what I new was safe and left alot on the phone just because I was not sure what to remove
Phone was working great and had no problems
I decided I wanted to do a factory reset to remove all my apps and user data etc.....
I did do a titanium back up of my apps so I could easily resinstall if I wanted
I did the reset and now as soon as the phone boots I get TWLauncher force close and just about any other app that tries to load just continuose force close loop
I did not remove the original launcher so I am not sure why this is happening but I cant flash since I cant get into download mode and I cant use ADB since my phone wont let me put into debug what to do?????????????
Click to expand...
Click to collapse
Its happening because you ran a full titanium backup including system data. Yeah, dont do that. Reflash, then reinstall user apps with data, and pick and choose the system ones that are obvious (mms, bluetooth settings, wireless settings, etc.) Then reboot for changes to take effect. When in doubt, dont restore.
Good luck. Although you won't need it if you do what I just told you.
Sent from my SGH-T959 using Tapatalk

Just to share...
eugene373 said:
No No No.......
When you can't get into Download MOde....
assuming you just got a Hang in ODIN Flasher...
1. Un-plug usb from Phone ( But still plugged into the Computer )
2. Pull Battery
3. Let the Phone sit for 15 to 30 seconds
4. Plug in USB to Both Phone & PC if not already
5. Hold Both Volume Buttons
6. Put Battery in while still holding Volume Buttons.
My Phone is HW Locked as well, with a v1 board.
every-time I get odin hang, doing the above always results in letting me re-flash.
These Phone's by Design are hard to brick, unless you>
A. Change SBL
B. Use the Wrong .pit file for Partitioning
C. param.lfs does not Brick the Phone, but Does mess with Screen rendering
~Eugene
Click to expand...
Click to collapse
I had the phone!computer bricked Vibrant, and just got my replacement from Asurion (in fact, of the phones in front of me are from Asurion since my original got stolen 2days after it came out ).
On phone1: The original TMO date is 8/12/2010, while the Asurion date is 8/19/2010. Also the ID is GJ/HLP. This one was HW Locked.
On phone2: The original TMO date is 9/2/2010, while the Asurion date is 9/10/2010. Also the ID is SM/HLP. This one doesn't seem to be HW Loocked, I can get into recovery easily, DL Mode ... not so much . Booting with vol+&- gets me into recovery, but booting with just vol- does nothing ...
Any thoughts?

did lag fix now stuck on black screen!

ok..im new to the galaxy and android phones .. i bought the phone rooted..not sure all what it had but i was running i believe a different rom on the phone, 2.1 update 1 i believe, it had rom manager and clockwork recovery on it, anyway .. i tried doing the lag fix and now the phone just turns on and stays on black screen.. keys at the bottom stay lit up also.. i can get into recovery but not really seeing anything in there that is helping.. can i factory reset or something from this recovery screen? like i said im not real familiar with these phones but im good with directions so if someone can explain how to fix this that would be great! thanks!

Hi, did you try using odin to flash back to stock?
the files you need to flash are in this thread
forum.xda-developers.com/showthread.php?t=734475
Also make sure you have samsung drivers installed on your computer. Which can be located here forum.xda-developers.com/showthread.php?t=728929
A stable version of odin is in this thread
forum.xda-developers.com/showthread.php?t=790026
steps
1. you will need to download odin..open it
2.Make sure your phone is off. connect your phone via usb and get into download mode(hold the volume keys+power when screen turns black let go of power button) now you should see a yellow triangle with android icon
3.to make sure your comp recognizes the phone.. pull out usb and put it back into the phone.
4. look at the first link i posted and flash the files accordingly and you should be good to go.

ok..i will try it. unfortunately i use my phone to tether so now im back on my blackberry which is SLOW.. odin is saying like 4hrs to download..loL!

I had the same issue. It sounds like you didn't install a BusyBox version that has extfs support built in. I could swear that the lag fix option I pulled down was supposed to have it, but it didn't. If you made a nandroid backup before you tried this, you should be able to get into recovery and restore. If not, you'll have to get to download mode and Odin flash back to stock.
If your phone is hardware locked, with the state your phone is in, you SHOULD be able to do an "adb reboot download" or "adb reboot recovery" to get into those modes.

Touch Wiz update messed tab up please help!

ok so here is what happened i have a stock US retail wifi only 16gb tab no clockwork recovery or none of that , im kind of a noob when it comes to that stuff, so today i received the update cool i downloaded it but it didn't install the first time for some reason. The it said a previous update was sucessfully downloaded but did not install do i wish to instal so i clicked yest and it said tab is about to reboot, clicked ok and it took me to this black and grey screen like the boot screen only with a loadbar and it zoomed to 100 percent. then i got the original samsung galaxy boot logo and the noise but no animation then the screen goes to this nasty screen with alot of colorful lines and dots everywhere and i cant see anything looks terrible.
Heres what i can do i can go into the bootloader by pressing power and volume. and i already tried to do a restore/wipe but didnt help, i can also plug it in to the computer and use the sd card and put and remove files from tab. im wondering if i can somehow get the update put it in the tab and install from there and see if it works or if i can get stock honeycomb and try to see if that works because they guy at samsung was clueless he didnt get the fact that i cant use the OS and said i need to get it serviced when i know its a software problem.

exact same thing happened to me! keep me posted

I've just got absolutely the same problem. I have a stock wifi 32gb version.

If you can get to your bootloader and sdcard still then why don't you just install CWM and try flashing the stock 3.1 OTA?
All the files you need and instructions are here: http://forum.xda-developers.com/showthread.php?t=1171089
Once you're done flash the stock recovery back and try the update again, or just wait for one of the devs to release a flashable zip.

sorry if im mistaken but dont i need to be able to use the tab and install something from the market place to be able to install CWM thats what im getting from what i read?

I can't even get my bootloader. Holy f**k am I pissed. Does anyone have any ideas??

Ok. So I installed the Samsung Kies software. It recognizes the device and shows that the update is available. However, it says that the battery should be fully charged. So now I am waiting for the full charge to proceed.
Hope the Kies helps.

I'll try that too. ahh

tonyurquiza said:
sorry if im mistaken but dont i need to be able to use the tab and install something from the market place to be able to install CWM thats what im getting from what i read?
Click to expand...
Click to collapse
No.
Go to the thread I linked, download the files, watch the youtube video.
1. Install the GT-p7510_USB_Driver if you haven't already
2. Start Odin - untick the auto reboot option
3. Click PDA and choose recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
4. Power up your tab and get it into download mode (power down + vol down, then vol up)
5. connect the tab to your PC, one of the boxes in odin should highlight yellow and say com 4 or whatever.
6. press start and it'll flash CWM to your tab
7. wait till it's done, it should only take a few seconds and the boxes will turn green.
8. power down your tab and unplug it from your pc
9. boot into CWM, (power down + vol down, vol down to select CWM, vol up to enter.
10. flash hc-3.1_ota-full_sam_tab_10.1.zip
11. do a factory wipe in CWM and wipe davlik just to be safe
12. reboot, and hopefully you'll be back to stock 3.1
From here you can do whatever you want.

Connect it to a PC and there's a firmware recovery on KIES. Hope that works!
Sent from my GT-P7510 using XDA Premium App

lordwinkevin said:
there's a firmware recovery on KIES
Click to expand...
Click to collapse
it didn't work for me. There were no devices in the list to recover.

I'm going to try it once my kies is finished updating. I really hope this works.

haha well first and formost i want to thank everyone for thier input. I did alot of searching online i tried KIES samsung tech support was useless. So i found the instructions on how to put clockwork on a locked bootloader got it on there and flashes the stock rom and it worked my tab is now back! only problem now is i tried to update again and only go the minor update and it doesnt find the big one lol but cant complain ill just wait lol thanks again. and to others who had the same problem dont deal with KIES to recover its useless unless you were using the program to update. I suggest getting CWM and flashing stock since thats what worked for me?

tonyurquiza said:
haha well first and formost i want to thank everyone for thier input. I did alot of searching online i tried KIES samsung tech support was useless. So i found the instructions on how to put clockwork on a locked bootloader got it on there and flashes the stock rom and it worked my tab is now back! only problem now is i tried to update again and only go the minor update and it doesnt find the big one lol but cant complain ill just wait lol thanks again. and to others who had the same problem dont deal with KIES to recover its useless unless you were using the program to update. I suggest getting CWM and flashing stock since thats what worked for me?
Click to expand...
Click to collapse
Glad to hear it worked.
Since you now have CWM, just download the flashable zip from here: http://forum.xda-developers.com/showthread.php?t=1198921
Make sure you do a factory reset in CWM after you flash this, otherwise you'll bootloop.

hoodoomagic said:
No.
Go to the thread I linked, download the files, watch the youtube video.
1. Install the GT-p7510_USB_Driver if you haven't already
2. Start Odin - untick the auto reboot option
3. Click PDA and choose recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5
4. Power up your tab and get it into download mode (power down + vol down, then vol up)
5. connect the tab to your PC, one of the boxes in odin should highlight yellow and say com 4 or whatever.
6. press start and it'll flash CWM to your tab
7. wait till it's done, it should only take a few seconds and the boxes will turn green.
8. power down your tab and unplug it from your pc
9. boot into CWM, (power down + vol down, vol down to select CWM, vol up to enter.
10. flash hc-3.1_ota-full_sam_tab_10.1.zip
11. do a factory wipe in CWM and wipe davlik just to be safe
12. reboot, and hopefully you'll be back to stock 3.1
From here you can do whatever you want.
Click to expand...
Click to collapse
How would i get hc-3.1_ota-full_sam_tab_10.1.zip on my tab to flash via CWM if I can't get the tab to boot?

tonyurquiza said:
ok so here is what happened i have a stock US retail wifi only 16gb tab no clockwork recovery or none of that , im kind of a noob when it comes to that stuff, so today i received the update cool i downloaded it but it didn't install the first time for some reason. The it said a previous update was sucessfully downloaded but did not install do i wish to instal so i clicked yest and it said tab is about to reboot, clicked ok and it took me to this black and grey screen like the boot screen only with a loadbar and it zoomed to 100 percent. then i got the original samsung galaxy boot logo and the noise but no animation then the screen goes to this nasty screen with alot of colorful lines and dots everywhere and i cant see anything looks terrible.
Heres what i can do i can go into the bootloader by pressing power and volume. and i already tried to do a restore/wipe but didnt help, i can also plug it in to the computer and use the sd card and put and remove files from tab. im wondering if i can somehow get the update put it in the tab and install from there and see if it works or if i can get stock honeycomb and try to see if that works because they guy at samsung was clueless he didnt get the fact that i cant use the OS and said i need to get it serviced when i know its a software problem.
Click to expand...
Click to collapse
Mine did exactly this too, by the way....

I would go this way:
http://forum.xda-developers.com/showthread.php?t=1167250
/Doc

* deleted *

Thank you DocRambone, flashing that via Odin got me up and running.
Then I flashed CWM as per earlier post and then flashed the Stock UEKMB + root ROM and I guess I am good to go.

Ok guys. This is my report. I used the Kies to update. The firmware was updated successfully and now the tablet works perfectly!
So this is easier and less painful method than using CWM described above =)) (but thanks to hoodoomagic for the description anyway)
Hope this will help somebody.

Tab issues: won't do a thing....

Ok, before I get flamed, I did search (and search and search and search)...
Here's the back story. I have a VZW Galaxy Tab, and I was running OldMacNut's Honeycomb alpha on my tab... I wanted to be able to use 3G, so I wanted to use another ROM, so I attempted to flash one through recovery. It failed everytime I tried, so I went back to Heimdall and did a clean original stock download, and everything went wonderful...
Me, not being able to leave the damn thing alone figured I would root it, and then throw CWM back onto it, then install the GB rooted ROM on... Well, when I ran CWM it converted the the file extention, and when it went to reboot, it just boot looped.
So I held the power button down, and shut it down. I had it plugged into the charger and walked away from it for a few minutes to take care of something else, and when I came back to it, the sceen showed the battery icon like it was charging, but a multi-lined circle in the middle of the battery, and the green moving part of the battery wasn't working like I have seen on the Galaxy S devices...
I went to try to turn it back on, and nothing happened, so I researched some, and left well enough alone and let it charge.
Now, the battery icon isn't even on the screen, and the screen stays black all the time.... No matter any combination of buttons or screen holds I do, it isn't turning back on now, even while it is plugged directly into the wall.
I'm at a lost.
Any help would be AWESOME!!!!
THANKS IN ADVANCE!!!!!
EDIT: I let the Tab sit for a LONG time, and I got the battery icon thing back... Still afraid to try anything else atm.
PLEASE PLEASE HALP!!!!!

Can you get to download mode?

Tabulous said:
Can you get to download mode?
Click to expand...
Click to collapse
That's the issue... I can't. I've tried and tried. I left the tab plugged in overnight, so I'm hoping that it at least is fully charged now, so I can try to mess with it today some.

here's what you should do. let's start from the very beginning.
1. download heimdall. get it here: http://forum.xda-developers.com/showthread.php?t=755265
2. download the stock verizon files. get them here: http://www.blackmugmedia.com/Android...n/VZW Stock/
you need all four files.
3. download the drivers for the samsung sch-i800. find those here: http://downloadcenter.samsung.com/co...v1.3.350.0.exe
4. unzip heimdall. go into the drivers folder, and run zadig.exe. at the top, select 'list all devices'. go to the dropdown menu, and select Samsung Composite USB (i'm pretty sure that's what it was called.) click start, and let it run.
5. open the heimdall front end.
6. put system in system (if you're flashing to ec02, then put factory in system) put cache into cache put param into param put the zimage into both the kernel and recovery slots.
7. turn your tab off, and plug it into the computer using USB. hold down the power and the volume down buttons until you see the little droid dude with a shovel.
8. click the start button on heimdall.
9. wait for the flash to complete (don't unplug your device, obviously, during the flashing.) once your phone reboots, it's okay to unplug it.
10. now, boot into the stock recovery, and wipe data and cache. update to ec02
11. enable usb debugging.
12. plug your phone back in to the computer.
13. now run superoneclick for root. get that here: http://forum.xda-developers.com/showthread.php?t=803682
14. either play with it in stock, or go find oldmacnut's excellent Better Than Life Rom, and follow the instructions to flash that.
15. enjoy your tab!
Hit me on the thanks button if you find it useful ; )
Sent from my Galaxy Tab using xda premium

That's good advice for some people infinity, but as detailed in the immediately prior post, the OP cannot access Download Mode, rendering your instructions unworkable. Without either Recovery or Download modes, there's not much you can do unless you're willing to try the UnBrickable Mod (search for it).
Hope that helps.

Note 4 N9108V no download mode?

when trying put the phone in download mode by pressing Volume down, Home and Power buttons phone goes into factory mode and the choices in there are:
Auto Test
Manual Test
Item Test
Test Report
Debug Test
Clear eMMC
Version
Reboot
When i do Volume up and power i get to a screen with an android on his back his chest open and a red triangle with an exclamation mark in it. i know its android recovery but it cannot flash roms.
all i want to do is put a recovery on this phone. Ive already rooted it with kingroot so its rooted just need a recovery and a new rom for the one that came on this phone is horrible!!!
Ive tried downloading twrp supersu etc from play store installed them and when they try to install recovery or su they say they cannot.
also have installed all the different usb drivers ive found for samsung and odin
btw my pc is a decade old windows xp dinosaur
Thanks for any assistance in getting to put a recovery on.

wow did not think this would stump the xda community. anyone can tell me of another way to get a recovery on it would be great

Getting recovery on my N9108v wasn't a problem. I didn't see those options you mentioned. I must say I hate my phone but I have no problem getting to download mode. I guess at least the latest firmware is an improvement... but I had to reinstall everything because of a Google issue. Sigh.
Ok, here's what I do - I connect my phone to the computer using samsung usb connector - I press home key and press down volume, while powering up. A screen with chinese and a yellow triangle appear. I then press volume up and it goes into downloading mode and connects to Odin. That simple ... Maybe your phone is not a N9108v or is a copy? Maybe it's your kings thing software and choice of TWRP
I didn't use Kings whatever - I used the chainfire thingy and a chinese derived and downloaded CWM. Never bothered with TWRP for this phone as I doubt anyone has cared enough to make a version work on it. The N9108v is a dud in terms of anyone actually developing anything on it. I HATE THIS PHONE. I am eagerly awaiting the Xiaomi 5 or some other phone- almost went the ONeplus 2 - that can set me free and back to messing around and having fun with brilliant developer ROMS. Oh and did I mention I hate this phone! I know now that I cannot suffer another Samsung or any other phone that is made for the Chinese community that has no developer community.
Anyway, After Chainfire rooting - From Odin you can flash the recovery of choice, right? I think you only have CWM as a choice.
Then it is home button and up volume at the same time to get into your new recovery... Not easy to do first up, but once you do it a few times, it becomes stupidly easy.