Related
So I am new to this whole flashing thing and just recently flashed my phone using Eugene373 Froyo rom. Seems to be ok for the most part but a couple things I noticed:
1) I can no longer use OCLF to fix my lag issues.
2) when I redownloaded the rom manager after flashing and I reboot into recovery it gets stuck at the vibrant screen. I let it go for about 5-10 minutes and nothing happed. Should i have waited longer??
3) When I power off my phone to and use the 3 button sequence to get into recovery mode it will not let me. the phone just keeps wanting to power on.
Any body have any ideas how to fix any of these issues??
Go to rom manager and click flash rom manager its the top box that will allow you to get into custom recovery
Constantly drinking
hello i just wanted to see if i still could get help with my useless device
Ok so yesterday ive rooted the phone and today i tried to install cyanogen mod 7 rom
i used rom utility which i ve downlaoded from android marketplace
now sometimes my phone boots and gets to the logo loop
ive heard that clearing cache and settings would work but i cant access these menus as my hboot is not reacting to my key presses , i tried to reflash the phone but nothing came with success.
I used android sdk and RUU but nothing with success .
maybe anyone would teamview me or give me step by step tutorial how to get this phone alive again would be appreciated
You will be rewarded
You rooted the Phone with a App from the Market?
You need if your HBoot is lower then 1.* the unrEVOked Tool.
If its 1.* there is no way to flash it.
Okay, maybe it worked with yout root app from the market, dunno, but i dont think so.
So you cant access while pressing volume down (keep holding) and switching on the phone the bootmanager? oO thats no good.
The Logo will stay up to "15minutes (<-?)" after flashing a new Rom. In this time its possible, that you Phone restarts automaticly. its normal. Switch it on an wait up to an half hour. If it keep staying in the boot sequence while showing the logo you got a problem .
I think there isnt a more unsave way than a "Flash by teamviewer". You have also pay attention to the phone while flashing. on TV you cant keep an eye on it.
But how can you reflash your phone without getting access to the bootmanager/ HBoot? I think you habe to access the clockwork to flash cm7 *thinking*.
If u nowhow to use adb try n get a adb logcat if possible
Sent from my HTC Wildfire using XDA App
Hi borris and daddyspud thanks for your reply ,i cant move around in hboot ,my hboot version i 0.80.0003
Ive rooted it using unrevoked with clockwork mod on it.
now even when i get it to boot it just loops in cyanogen animation,should i leave it for 15 minutes to do its thing?
also im new to this so i dont know anything about sdk and adb,all i did is saw the tutorials using it ,so i thought i would use it just to give it a go
HBoot 0.8 is rootable, so its okay.
If there is still an animation while you see the CM Logo everything is fine.
If it freeze for some minutes is there a problem. The Animation shows you "i am working / installing".
Yes, let him do his thing for some Minutes.
I think everting should be okay and after some minutes it will work like normal.
It reboots sometimes it self, but this is also okay.
I dont know... does the new CM7 also install a new HBoot? So its possible why you cant move around in it.
Do you wait about 10 seconds before you try to move around in it? Because in the first seconds it looks like it freezed an then it start a test or something. this takes about 10seconds then you can use it.
Its not bricked if its turning on.
Can you get into recovery? If you can try flashing the 4.1 kernel.
If that doesnt help, go into recovery and do a full wipe. Clear cache and dalvik, and under partitions menu format everything except SD card. Then flash CM7, then the 4.1 kernel
Remember first boot will take 10-15 minutes. Be patient. If youve done everything right you shouldnt have any problems
Hi and thanks for cooperation ,i left my phone on cyanogen animation for an hour and nothing is happening just animation loop constantly.
I've just tried hboot and it searches for the PC 49 DIAG and says not found after that it freezes and i cant use any menu navigation buttons . in hbot and fastboot.
I dont even know what to do next
Much help appreciated guys
oO
thats weird.
the PC49DIAG is a part of the rom it self. So i think you have to try to re-flash it. Did you try it with or without a goldcard?
before you flash your phone whipe ALL datas on it!!!
If i start in bootloader mode i get also all the "missing" errors but i can still use the vol up/down buttons to navigate around.
That should help.
I think you did something wrong while flashing.
the root failed?
you got an error while flashing?
goldcard?
Try to flash a RUU from shipped roms. DONT flash a Froyo rom, you will get the HBoot 1.* if you do this.
Recoverymode doesnt work in the hboot?
If you try recoverymode you will get a blackscreen with an triangle.
most say "press the power button" to enter the recovery mode. if this doesnt work press the "volum up button (hold it) then the power button" this should enter recovery mode.
**EDIT**
http://shipped-roms.com/index.php?category=android&model=Buzz use a www-rom its without a branding. and use a RUU rom.. and pls dont use a froyo rom. after flashing this your root is gone i think but your phone will be alive again.
dont try the cm7 this time. use a stock rom.
is it alive again?
i talked today to someone who hat exactly the same problem like you.
it was simple to fix the problem... he (you also?) didnt
whipe the phone before he flashed the cm7. thats why it wont stop looping
in the cm7 animation.
after whiping and reflashing everything was fine.
... did you whipe it b4 flashing?
Hey you guys
I recently installed amon ra's recovery v. 1.7 on my magic 32a (radio 6.3.5 something) after I rooted my phone, of course.
Now, I thought that with the new recovery I would be easily able to flash a custom rom onto my magic. This was however not so easy, because the recovery behaves in a very weird way. Whenever I tell it to flash a new rom from a .zip image, or wipe the phone, or anything, it just reboots my magic and thats it. Also, the recovery happens to freeze quite regularly when I don't act very quickly. E.g. when I boot into recovery mode and don't touch the phone for the first 5 seconds, it wont respond any longer.
So, I'm probably doing something wrong here. I would appreciate any help from anyone. (and btw, i have the official android 1.5 sense rom installed on my magic, os I cant use rom manager either, since it only supports android 1.6 upwards.)
Look at the root guide in my signature..
Do step 0, 1, 2, 5 and 7 only.
It should flash the recovery partition one more time.
Hopefully it will fix your problem :0)
mumilover said:
Look at the root guide in my signature..
Do step 0, 1, 2, 5 and 7 only.
It should flash the recovery partition one more time.
Hopefully it will fix your problem :0)
Click to expand...
Click to collapse
hey, thanks for the quick response. I still have a few questions though, since I am quite a newb. So when I type all of those commands into cmd, doesnt my device need to be connected to the computer somehow? I read somewhere earlier that I simply connect it using the "mount" funtion, the problem is that that doesnt seem to work anymore for my magic, because after I hit "mount" it simply goes back to "usb connected" without acutally mounting. So ..how do I connect the device to the PC while entering the commands?
ok... my bad..
Try to read the ENTIRE guide... then do the steps i mentioned above :0)
Don't mount it... just connected... but again.. read the guide.
thanks a lot
I didnt use your method to flash the image, but the hero recovery works way better than the one I had before. I managed to flash a rom now. So happy ;D
ok i think i just did a bad mistake
i installed rom manager after i had flashed an android 2.1 rom on my magic. THen i told it to flash some rom from my sd card and also wipe some data, or something. Now my magic gets stuck on the magic bootscreen, like it keeps looping. Did i brick my phone ..or is there a way to fix this? please help me, (
most likely is that the rom you flashed doesn't have a compatible kernel for your phone.
Just boot into recovery and flash a rom that is compatible.
cant boot into recovery ..it just keeps looping
Then you will need to boot into fastboot and reflash a working recovery.
Clockwork has issues flashing the clockwork recovery sometimes.
to boot into fastboot i need to hold power and back, right? ..that doesnt work either. again, it just keeps looping.
so, guys ..did i brick my phonne..?? :S
da robat said:
to boot into fastboot i need to hold power and back, right? ..that doesnt work either. again, it just keeps looping.
Click to expand...
Click to collapse
you're probably not doing it right. you should still be able to get into recovery or fastboot and install a different recovery. i'm using RA-magic+v1.7.0.1 recovery it has bugs but pretty stable.
so what am i doing wrong??
just realized when i connect the phone to my pc over usb and then boot it, it connects to the pc for a second or less and then disconnects again. Dont know if this helps anyhow.
pull battery, put battery back in. hold back and push power.
Should be good.
tried that like 50 times. phone just keeps looping ..like, it restart over and over again.
What you have is what hundreds before you had when they used Rom manager.
The system will not boot into anything.
My advice is to never use Rom manager for 32A device.
The fix:
Keep pushing the back button while the system reboots... just mash the **** out of it..
I helped out someone before you, and he did it for over an hour or so...
It's a timing issue...
Good luck
haha ..so is there still hope?
cheers for all the answers ;D
i do have one question though, actually.
Shall i just press the back button continuously ...while it keeps looping, or should i rather restart the device after each loop and hold the back button?
just mash the back button.
My phone is stuck in a boot loop after it automatically installed an OTA update when on a custom ROM. at first recovery worked, tried installing a custom rom from fresh with the sideload in CWM, then after reboot recovery does not boot, just LG logo and restarts again. Any ideas?
Need it fixed badly no phone for 5 days now.
LightInDark said:
My phone is stuck in a boot loop after it automatically installed an OTA update when on a custom ROM. at first recovery worked, tried installing a custom rom from fresh with the sideload in CWM, then after reboot recovery does not boot, just LG logo and restarts again. Any ideas?
Need it fixed badly no phone for 5 days now.
Click to expand...
Click to collapse
I just did this today, and also am out of a phone for now, apparently I lost the software, and in the process of trying to get out of the ota i blocked twrp. Anyway, does yours just go on the lg logo and have the pulsing led? Thats what mine does and I think I can get into download mode which may help. But it wont show up when I plug it in . Good luck to you, if I figure something out ill post it here.
Oxiit said:
I just did this today, and also am out of a phone for now, apparently I lost the software, and in the process of trying to get out of the ota i blocked twrp. Anyway, does yours just go on the lg logo and have the pulsing led? Thats what mine does and I think I can get into download mode which may help. But it wont show up when I plug it in . Good luck to you, if I figure something out ill post it here.
Click to expand...
Click to collapse
No LED but it just loops on the LG logo over and over, no access to download at all, tried all combinations but if i hold in power+vol buttons it eventually just gives flashing red LED until i let go of the power then it starts boot looping again.
LightInDark said:
No LED but it just loops on the LG logo over and over, no access to download at all, tried all combinations but if i hold in power+vol buttons it eventually just gives flashing red LED until i let go of the power then it starts boot looping again.
Click to expand...
Click to collapse
The red led is what i get when I try to go into download mode too. Just holding down the down and up takes me to that and it keeps going until i press another button. Thats odd you have no led though.
Is this just unfixable? I really need my phone back.
Its the same thing that happened to me the other day. Theres a way to fix hopefully, try this thread http://forum.xda-developers.com/showthread.php?t=2582142&page=3
My posts are at the end and mine is totally unrecoverable at the moment so off to Verizon for me. There are others in my shoes too but I would try that thread first to see if you can recover. If you do go thru ubuntu and only get " /dev/sda /dev/sda1 /dev/sda2 /dev/sda5 "
your pretty much hosed from what I gather. No one has all the files to recover from where I'm at. See my posts on page 13 and 14.
Hopefully someone can figure this out but I cant wait for it to happen. Good luck
Camoxjeep said:
Its the same thing that happened to me the other day. Theres a way to fix hopefully, try this thread http://forum.xda-developers.com/showthread.php?t=2582142&page=3
My posts are at the end and mine is totally unrecoverable at the moment so off to Verizon for me. There are others in my shoes too but I would try that thread first to see if you can recover. If you do go thru ubuntu and only get " /dev/sda /dev/sda1 /dev/sda2 /dev/sda5 "
your pretty much hosed from what I gather. No one has all the files to recover from where I'm at. See my posts on page 13 and 14.
Hopefully someone can figure this out but I cant wait for it to happen. Good luck
Click to expand...
Click to collapse
No doesn't work, that fix requires the phone to get PAST the LG initial turn on logo, but it only comes on for 10 seconds then reboots again, not enough time for USB to enable on the phone itself so PC can't even detect it.
Just LG for 10 seconds, off, then LG for 10 seconds and does it over and over.
Anyone else with an idea?
I'd rather not send it away because don't want to get in trouble for having recovery and custom ROM on the phone.
Did you figure out the solution?
I'm stuck in bootloop too, can't connect to the phone to use adb anymore after i tried to install trwp. Download mode isn't seen by my computer...
Hello, cutting to the chase
Model: LG G2 D802
Story time: I tried to install ressurection remix rom through the sideload, after fully wiping my phone ( Wiped system, data, yada yada ) it showed some kind of an error about SU not installing properly, I thought well if I'll reboot TWRP will automaticly install SU for me, so when I tried to reboot it showed that No OS is installed, I thought it's a simple bug so I'll reboot to recovery again to check and bam. Nothing works.
+ Can't boot into recovery ( Tried volume down + power button ) LG Logo shows up and goes blank again ( Note that the screen doesn't turn off, just stays black, after holding it for a couple of seconds I can see screen going off completely but can't turn it on)
+ Can't turn it on normally.
+ Can't boot into download mode.
+After plugging it into an USB it mounts a D lettered drive with 63MB stuff in a folder called image with *.mdt files, modem files( I can screen it if it's important )
I'm clueless, never happened to me even though I flashed a lot of roms, I think I bricked it. Help?
UPDATE: I managed to quickly release Volume Down And Power buttons when LG appeared for half a second and hold it again, succesfully booted into TWRP. I haven't bricked it I think. Will tell how it goes <3
Hey man, how'd it go?
I'm in exactly the same situation as yours, can boot into twrp but nothing else works, i fear of the qhsusb_bulk brick but these people don't even seem to have recovery.
Any suggestions? Go back to stock? How?
Argus137 said:
UPDATE: I managed to quickly release Volume Down And Power buttons when LG appeared for half a second and hold it again, succesfully booted into TWRP. I haven't bricked it I think. Will tell how it goes <3
Click to expand...
Click to collapse
How did it go!? I'm in a similar situation (but can boot into download-mode). Would love to get back to twrp, since I want to give it a try to flash another cm (stable). Thanks for sharing your experience...
If its picking up bulk mode normally its hard bricked there is a guide for restore nearly all g2s from hard brick having done it myself included 1st time took me a week to get back up but. Now i prob take about 45 min just cause i aint had one in a while
TheMadScientist420 said:
If its picking up bulk mode normally its hard bricked there is a guide for restore nearly all g2s from hard brick having done it myself included 1st time took me a week to get back up but. Now i prob take about 45 min just cause i aint had one in a while
Click to expand...
Click to collapse
Hey there, can you specify what you did exactly or where to find!? Do you mean something like this? (can't post outside links, in XDA-forum, title is "LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]") Thanks for help...
Yes thats it. Lol i still got the files on my pc for my g2 i keep the whe setup cause im on the g3 now i just check in the g2 forums cause i had mine for 2 years and modded the crap outa it but yea i keep all the files on hand so if anything ever happens i can fix it almost on the fly now
Well so what happened to me that I managed to get inside the TWRP. When it lighed it up for a second I quickly released and held again that got me inside magically. So then I just transfered new rom and tried to install again. Sadly I didin't see that the ROM Im trying to install requires bump TWRP and I bricked my phone again. Though I entered download mode and flashed the stock rom through LG G2 flasher.
heres a video i made, how to go into recovery. for those that cant get in to twrp.
https://www.youtube.com/watch?v=jPUTImVEHqc