Related
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
diacronic said:
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
Click to expand...
Click to collapse
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
dougstoner said:
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
Click to expand...
Click to collapse
ok that was disabled. I enabled it, same problem.
Seems to be running Open Touch 5.0.
Just bought it off ebay.
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
If it had OpenTouch 5.0, it might have already been HardSPLed. Either way, I'm glad you found the answer yourself. It shows that you actually did your research.
diacronic said:
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
Click to expand...
Click to collapse
That's really not a bad idea. I know I was EXTREMELY confused the first time I flashed my rom. It took me a lot of reading to finally understand RUU stood for rom update utility. You do know for some roms, it's not necessary to hard spl. I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
There's a walkthrough by me somewhere in the forums.
dougstoner said:
.... I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
Click to expand...
Click to collapse
Just downloaded ivan's kitchen , but I'm having problems getting it to run. Going to use that to probably make my own and get used to the programs that are out there.
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
What radio (if any) have you flashed? Check the ROM's dedicated thread you want to flash and see if the radio is compatible.
Im betting you've flashed the wrong radio
take the rom it was shipped with, name the nbh file to LEOIMG.nbh, copy it to your sd card and go into bootloader.
it will flash your old rom and should overwrite the old radio.
DN41
I installed Radio 2.06.51.07, which was recommended as far as I know.
I tried to install every "official" rom that I could find, but no matter if I apply them via SD card, USB or .exe, the install never finishes.
Tried to install just the OS without a radio and that worked, so I'm almost sure it is somehow radio related.
Now the problem is that I can't even send it to T-Mobile, because I there is no way to get rid of HSPL. BTW, it's the german T-Mobile we are talking about, not the US one. Is there a chance they won't notice the HSPL...?
so flash this one over sd-card: german t-mobile 1.72
what about performing hardreset? does the phone boot?
DN41
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
djchubbs said:
Im betting you've flashed the wrong radio
Click to expand...
Click to collapse
any way to repiar radio side as flashed wrong radio ??
flanders3 said:
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
Click to expand...
Click to collapse
same happen with me,,,
flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
I have exactly the same problem.
I believe radio hardware of my HD2 has failed.
This is not related to flashing an incompatible radio, as I have flashed 1.66 official ROM about three months ago and had no problems until now.
I got the white screen, when phone was in my pocket.
Not possible to update radio, update fails with "Radio_V2 failed" and "Update Terminated".
Not possible to flash any rom, flashing fails when it comes to radio part.
MTTY didn't help as well.
I see no way but to send it back for repair.
Hope they dont realize HSPL, as it is also not possible to change SPL right now.
Hi everybody, i am facing the same issues with my knew HD2. The fact is that i received it yesterday, while trying to flsah ENERGY ROM ..i flashed also the radio .. now got the white screen with the HTC green logo, and no way to hard reset ... phone doesn't boot, can't do anything !!!!!! volume + and volume - doesn't work !!! any idea any solution ?? I am about to try flashing with the memory card but no idea if it will work, im not sure cause even the HSPL doenst appear ... anu idea ?
I've got the same problem
Mine is a Telstra (Australian) HD2, and I've been using it for about 3 weeks fine. Then a few days ago, I took it out of my pocket, and it's dead. With my one, most of the time I just get a blank screen (no HTC), and most of the time it's slightly yellow.
I'm having the exact same problems, and have done everything suggested on this page, and others. I can't send mine back either.
I'm guessing since no one's replied, there's not really a solution to this.
If it is a failed radio, I'm amazed how easily they fail, and how many people seem to have this problem.
I have the same problem today. Anybody help?
anakin621 said:
I have the same problem today. Anybody help?
Click to expand...
Click to collapse
i had the same problem with my Telstra T9193. i couldnt find any solutions so its on its way back to australia under warrenty.
I had a similar problem to this, though it appears I just fixed it. I can only imagine it's just a temporary fix though, as I previously managed to get it working and running Android only to white screen again the next day.
I did a hard reset and now it loaded the white HTC screen and nothing else. I tried installing a stock ROM from the MicroSD card and got the same "Update Terminated Update Fail" error because of the Radio. Retried the update about 3 times, and it eventually installed fine.
same here, i reloaded a stock from sd to relock it, which i highly recommend for anyone having this problem - in case it needs to go for repair and it just happens to boot..it took quite a few tries to have a proper flash and it booted only a few tries afterwards and then went back to only booting the white htc screen. so frustrating. and unfortunately for me it has to go back to australia for warrenty and will likely take ages to get back
I was stuck at multi color boot screen after hard reset. Tried multiple roms.
Solution: Use the 2.13 rom from here. Worked thankfully!
forum.xda-developers.com/showthread.php?t=655653
After being looooong on this forum, I finally got my first bricked HTC. I got all the same problems, white screen, no way to get HSPL gone, and no update via SD possible, no ROM update via USB in bootloader and no radio update possible...
Anybody knows how much it costs if I send it to HTC and they find yout it has been HSPL-ed?
Next with the bricked HD2
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
-rr-obin said:
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
Click to expand...
Click to collapse
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Birger said:
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Click to expand...
Click to collapse
Check this thread... unfortunately it wouldn´t be quite easy whith the service repair...
_JuSteR_ said:
...
With the radio bricked there are only two things you can try to do:
1- You can go on using your hd2 without updating the radio. Try to download a rom without radio and install it, or ask a cook to prepare a rom (you can try an official rom if you want to recover the original SPL) without radio for you.
2 - Do what I did and sell the phone as bricked, because there's no way to unbrick radio system. I tried to save my HD2 by recovering the original SPL and sending the phone to the htc customer service. I got the phone back after 2 months and it was still radio bricked
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=618084
upload a pix of your bootloader screen,I had similar kind of problem.I 've been through a lot of hardship dealing with the that.Maybe i could help u a bit.
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped
so i flashed my phone with the wrong radio i believe but the strange thing is that my computer recognizes it. the doesnt turn on at all but i here the sound of a device being plugged in when i plug it into winodws. is there a chance its not bricked?
the sound doesn't necessarily indicate much.
what did you do? specifics, please?
can you get into bootloader?
i was trying to flash a stock rom and i guess it didnt work?
minnieman said:
i was trying to flash a stock rom and i guess it didnt work?
Click to expand...
Click to collapse
mate. as i said, specifics please. like what rom / type of phone do you have? what rom were you flashing? you said radio, now you say rom.
also, as i asked, can you get into bootloader?
please, if you want help, we need information.
minnieman said:
so i flashed my phone with the wrong radio i believe but the strange thing is that my computer recognizes it. the doesnt turn on at all but i here the sound of a device being plugged in when i plug it into winodws. is there a chance its not bricked?
Click to expand...
Click to collapse
You may try and follow this solution, I suggested earlier. Click here
Let us know if it worked.
sorry i was vague, i was in a rush to get to work this morning and on top of it i was panicking. i flashed the stock image:
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i tried that on a hd2 so i could flash hspl3 again and use wp7 on my hd2.
i ended up just sending it in, but if they send it back with no repairs ill try your method... i relly hope they just send me a new one though. i mean... i flashed a stock image to the hd2, so shouldnt they see no hspl and just the stock spl?
again, more details are needed.
like what type of hd2 do you have? if it is a us tmo brand, i believe it is bricked (as you flashed a .51 radio.)
if you flashed your stock rom from your sd card, hspl is removed. if you flashed over usb, and did not uninstall hspl, hspl is still there.
what i don't get is if you can flash a rom, why are you saying it is bricked? no offense, but each post seems to change the story (first it was a rom, the a radio, now you are flashing roms but sending the phone in, still don't know if you can get into booloader, but now you sent the phone in or is it in your possession???) and i am not following what you did, where you started or what is going on. maybe i am totally missing what you are saying (which is possible)...hope someone can help you.
i have the 1024 us tmous hd2. i tried to flash to a stock rom, forget i said radio. i tried to flash the .51 which i did not know would brick my phone, so i played dumb with htc and sent it in to get repaired. if they dont repair it i am kinda SOL because i flashed using usb and they will see it has HSPL. sorry, do i need to include anything else? i am just kinda a noob... sorry.
i swear i posted a response. hmm.
thank you for the details. your assessment of the situation is spot on; unfortunately your phone is indeed bricked. and likely htc will not know about hspl...or so i have heard from others.
curious, why did you send it to htc? did tmobile reject it? if not, and htc doesn't give you a new one, try getting it to tmobile (under warranty)- worked for me when the phone stopped working for unknown reason. good luck.
possible to make it back to work...?
jsmccabe78 said:
i swear i posted a response. hmm.
thank you for the details. your assessment of the situation is spot on; unfortunately your phone is indeed bricked. and likely htc will not know about hspl...or so i have heard from others.
curious, why did you send it to htc? did tmobile reject it? if not, and htc doesn't give you a new one, try getting it to tmobile (under warranty)- worked for me when the phone stopped working for unknown reason. good luck.
Click to expand...
Click to collapse
here i am one of the ppl out there have the HD2 bricked.
I have tmo version, Couple months ago i was trying to flash a office rom, which is i don't remember which one, but i really sure it was a HTC Office Rom., I let the phone do it thing while flashing, but after the flashing the screen go off and didn't back on working anymore, I still have the bricked phone though, and i was wondering if any possible method apply to the above problem?
i will looking forward to hear from u, Thank U,
chhada said:
here i am one of the ppl out there have the HD2 bricked.
I have tmo version, Couple months ago i was trying to flash a office rom, which is i don't remember which one, but i really sure it was a HTC Office Rom., I let the phone do it thing while flashing, but after the flashing the screen go off and didn't back on working anymore, I still have the bricked phone though, and i was wondering if any possible method apply to the above problem?
i will looking forward to hear from u, Thank U,
Click to expand...
Click to collapse
Were you able to get into bootloader Chhada?
nicedude_abad said:
Were you able to get into bootloader Chhada?
Click to expand...
Click to collapse
no dude, nothing respond with the power button, *_* it doesn't do anything,
headache
man this could be very tiring ive tryed everything from hard soft chilled any kind reset.volume down red green white button hold down but one thing is weird is when i connect it to the pc wiht the thing off it makes a sound like it sees it but no luck with tmobile rom update. ill send to tmobile and play the good guy http://media.xda-developers.com/images/smilies/confused.gif
I'm running Virtuous 1.1.8 ROM with latest radio (stickied-thread that shows May 11th date).
The first I did (accidentily) was make S=on. Now, whenever I try to go to bootloader to load PD15IMG.zip, it says "Main version is older. Update fail".
I believe I need to get back to S=off and first put stock recovery on before doing the pd15img.zip... Is that right? I have tried to get back to s=off without any luck.
I would appreciate ANY help. Thank you.
Legaleye3000 said:
I'm running Virtuous 1.1.8 ROM with latest radio (stickied-thread that shows May 11th date).
The first I did (accidentily) was make S=on. Now, whenever I try to go to bootloader to load PD15IMG.zip, it says "Main version is older. Update fail".
I believe I need to get back to S=off and first put stock recovery on before doing the pd15img.zip... Is that right? I have tried to get back to s=off without any luck.
I would appreciate ANY help. Thank you.
Click to expand...
Click to collapse
The file you are trying to load is a radio file. You cant flash a new radio unless you have S=off. Second, how and why are you trying to flash a new radio?
I don't know. I've read a bunch of guides and I think I'm totally confused now.
What do I need to do as step 1 in this situation? If its to get my device back to s=off, I can't figure it out. It was s=off, then I accidentily made it s=on.
I would appreciate any help. Thank you.
I remember someone else doing something similar in this thread. The thread gets a little confusing as someone else jumps in with a problem and you have 4 people talking back and forth. Read the whole thing to make sure it's identical to your problem. Something on page 4 fixed resolved one of their issues.
http://forum.xda-developers.com/showthread.php?t=1092170
Legaleye3000 said:
I'm running Virtuous 1.1.8 ROM with latest radio (stickied-thread that shows May 11th date).
The first I did (accidentily) was make S=on. Now, whenever I try to go to bootloader to load PD15IMG.zip, it says "Main version is older. Update fail".
I believe I need to get back to S=off and first put stock recovery on before doing the pd15img.zip... Is that right? I have tried to get back to s=off without any luck.
I would appreciate ANY help. Thank you.
Click to expand...
Click to collapse
what you should have done was revert back to the stock radio before flashing the stock PD15IMG. since you have the updated radio, when you flashed the PD15IMG it turned your security on and flashed the stock hboot, but since youre on the updated radio you now have a radio lockout. this happened to me and I never got mine fixed, tried every method possible, so I just bricked it. KOLOHE got his fixed, try the methods he did since youre pretty much in the same boat. post back with your results...
ps- there should be a sticky made or something of the sort stating that you should be on the stock radio before trying to flash the stock PD15IMG_Glacier_TMOUS_1.17.531.2_Radio_12.28b.60.140e_26.03.02.26_M
I just read your thread... I have tried everything... no luck... I now have no access to the phone except bootloader/recovery, meaning the only way to get my phone working again is through the .zip in the bootloader. I think I'm bricked
Legaleye3000 said:
I just read your thread... I have tried everything... no luck... I now have no access to the phone except bootloader/recovery, meaning the only way to get my phone working again is through the .zip in the bootloader. I think I'm bricked
Click to expand...
Click to collapse
you cant even get into recovery? are you sure? thats weird....I was still able to get into recovery and flash roms and everything, but couldnt flash in hboot
If I just turn on my phone like normal now, it gets stuck at the very first screen (white "MyTouch 4G"). I can still access recovery, but that's it. I tried flashing CM7 7.0.3 and when I reboot, still white "MyTouch 4G" screen...
Legaleye3000 said:
If I just turn on my phone like normal now, it gets stuck at the very first screen (white "MyTouch 4G"). I can still access recovery, but that's it. I tried flashing CM7 7.0.3 and when I reboot, still white "MyTouch 4G" screen...
Click to expand...
Click to collapse
the thing is, since you were on virtuous fusion the kernel from that rom will stick to every other rom (dont ask, I have no idea why lol). try flashing virtuous in recovery, that should work. since the kernel from the rom is sticking, you can only flash roms that are compatible with the kernel. you should still have total root access, but your r/w should be disabled because of the radio issue. only downsides to the problem...
Ok- so once I flash virtuous back... I'm still unable to ultimately get back to flash... correct? Thanks.
If I'm sending this phone in to T-Mobile for warranty exchange, I wonder if it will be better to put on virtuous (obviously non-stock rom), or leave it in a seemingly bricked state that only shows the "white MyTouch 4G" screen... What do you think? Thanks.
Legaleye3000 said:
Ok- so once I flash virtuous back... I'm still unable to ultimately get back to flash... correct? Thanks.
Click to expand...
Click to collapse
it will still say s=on and stock hboot, but you should still have root access when you flash virtuous. if you have tried all the methods in the other thread, then you are unfortunately out of luck...
Legaleye3000 said:
If I'm sending this phone in to T-Mobile for warranty exchange, I wonder if it will be better to put on virtuous (obviously non-stock rom), or leave it in a seemingly bricked state that only shows the "white MyTouch 4G" screen... What do you think? Thanks.
Click to expand...
Click to collapse
they can still get into hboot and recovery to see that youre using clockwork
clarknick27 said:
they can still get into hboot and recovery to see that youre using clockwork
Click to expand...
Click to collapse
Maybe he will get lucky like others who have returned rooted devices, he might give it to a not so smart person . There's always the shock treatment too if you cant flash the phone back to stock, only if OP has something to send high volts to phone.
Ace42 said:
Maybe he will get lucky like others who have returned rooted devices, he might give it to a not so smart person . There's always the shock treatment too if you cant flash the phone back to stock, only if OP has something to send high volts to phone.
Click to expand...
Click to collapse
thats how I got my replacement
Ace42 said:
Maybe he will get lucky like others who have returned rooted devices, he might give it to a not so smart person . There's always the shock treatment too if you cant flash the phone back to stock, only if OP has something to send high volts to phone.
Click to expand...
Click to collapse
And people wonder why T-mobile is charging a processing fee now for doing warranty exchanges.
You think I should be able to put stock recovery back on in my situation?
Also, where can I find that panache leaked rom? I don't understand how that's supposed to fix my problem...?
I think I got it to work! I used the hex editing method and flashed the .zip file in bootloader at the end of completing the guide (.zip that was included in that thread) and everything seems to be working like stock!
When I try to go to recovery, I get that icon with a red exclamation mark (which I think is normal for completely stock phones..??).
The only thing I'm not 100% sure about is in bootloader, it says hboot version ..86 Besides that, everything seems 100% stock. Will that .86 be an issue? Thanks.
Legaleye3000 said:
I think I got it to work! I used the hex editing method and flashed the .zip file in bootloader at the end of completing the guide (.zip that was included in that thread) and everything seems to be working like stock!
When I try to go to recovery, I get that icon with a red exclamation mark (which I think is normal for completely stock phones..??).
The only thing I'm not 100% sure about is in bootloader, it says hboot version ..86 Besides that, everything seems 100% stock. Will that .86 be an issue? Thanks.
Click to expand...
Click to collapse
.86 is the stock bootloader. I'm glad you were able to fix it. I'm not sire about the red ! maybe someone else can answer it. So are you going to keep it and start all over again?
I think the red exclamation mark is normal. If memory serves me right, the recovery was not accessible on complete stock and if you try to go to it you get this red exclamation point (someone correct me if I'm wrong).
I need to send this phone in as a warranty replacement. So it seems MISSION ACCOMPLISHED.
Thanks for your help along the way!