Related
Hello All,
I have installed Myn's Warm Twopointtwo on my EVO.
My 4G will will turn on, and it will pop up the 4G icon on the top of the screen.
However,
When I try to go to a website it will STALL halfway through the loading.
What I have tried
"As this ROM now uses the latest official HTC Kernel (#15) you MUST update your Radio/Wimax. I recommend Calkulin's combo update which is available here or via direct download here. " ( I Installed this and it did nothing )
"Installation Instructions:
1. Download Rom and Radio/Wimax updates and place in the root of SDCard.
2. Reboot into Recovery.
3. Perform Nandroid backup
4. Minimally wipe dalvik and cache. For optimal experience, perform full wipe (data/dalvik/cache).
5. Flash the rom first.
6. Then the radio/wimax update. While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery.
7. Once back in recovery, reboot.
8. Enjoy"
( I Installed this and it did nothing ) For #6 No it did not do this when I installed it.
"RLS5 Browser slowness fix" ( I installed this, it aborted during install )
My 4G Hangs and does not actually work.
Yes 4G for me is a deal breaker.
Everything else on the ROM is Great and Works. I would have posted this on the Warm Twopointtwo thread but this is my first post and I am not allowed to.
Thanks for your input.
Try a different kernel and see if that resolves the issue.
Is there one that you would recommend out of the Warm Twopointtwo list?
Alternative Recommended Kernels:
* ms79723's SBC for Netarchy's CFS More Aggressive 4.1.9.1 Kernel (v7)
* Ziggy471 Warm TwoPointTwo RLS4 Kernel
* netarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass-universal-signed
* Kings #11 CFS Kernel
* Kings #9 BFS Kernel
Evomaster said:
Is there one that you would recommend out of the Warm Twopointtwo list?
Alternative Recommended Kernels:
* ms79723's SBC for Netarchy's CFS More Aggressive 4.1.9.1 Kernel (v7)
* Ziggy471 Warm TwoPointTwo RLS4 Kernel
* netarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass-universal-signed
* Kings #11 CFS Kernel
* Kings #9 BFS Kernel
Click to expand...
Click to collapse
I personally use Netarchy.
I use:
netarchy 4.3.2-toastmod-cfs-nosbc-nohavs-suv-universal
Your problem is not the ROM or the kernel. It's an outdated AdFree hosts file. See here: http://forum.xda-developers.com/showthread.php?t=922839&highlight=slow+internet+myn. Basically you need to open the adfree app and update the hosts file or disable it altogether.
cavediver said:
Your problem is not the ROM or the kernel. It's an outdated AdFree hosts file. See here: http://forum.xda-developers.com/showthread.php?t=922839&highlight=slow+internet+myn. Basically you need to open the adfree app and update the hosts file or disable it altogether.
Click to expand...
Click to collapse
The issue they're talking about is slow internet.
He's talking about not being able to stay connected/connect.
I suppose he should try this first and, if it doesn't work, try a different kernel.
I changed the kernal to the
* netarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass-universal-signed
I tried the internet in 4G and it still hangs.
I have another EVO that is still stock and it loads lightning fast.
The Warm Twopointtwo Rom just sits there and hangs.
It works on mine, maybe try reflashing it.
Sent from my PC36100 using XDA App
Evomaster said:
I changed the kernal to the
* netarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass-universal-signed
I tried the internet in 4G and it still hangs.
I have another EVO that is still stock and it loads lightning fast.
The Warm Twopointtwo Rom just sits there and hangs.
Click to expand...
Click to collapse
Well then I would go here:
http://forum.xda-developers.com/showthread.php?t=922839&highlight=slow+internet+myn
As suggested above.
Works for me on HW0003 and HTC Kernel
Have you checked to ensure you still have your WiMAX keys?
I guess It is a slow hanging 4G connection is the actual problem.
The 4G is hanging so much I was not sure it was even connected.
I tried the AdFree app in the Market.
The app did not help the hanging or slow internet issue.
Blane, Thank You - Thank You
I downloaded the WiMax Key Checker from the Market and my 4G is LIGHTNING FAST again.
WOO HOO
4G - Is AWESOME!!!!!!
Evomaster said:
Blane, Thank You - Thank You
I downloaded the WiMax Key Checker from the Market and my 4G is LIGHTNING FAST again.
WOO HOO
4G - Is AWESOME!!!!!!
Click to expand...
Click to collapse
I'm glad it's working but that doesn't make any sense lol
Checking for your keys just checks to make sure it's there.
Doesn't do anything else...at all.
mattykinsx said:
I'm glad it's working but that doesn't make any sense lol
Checking for your keys just checks to make sure it's there.
Doesn't do anything else...at all.
Click to expand...
Click to collapse
Agreed. Wimax keychecker just checks to see if your RSA keys are still there, nothing more. Strange, but at least your 4g is working agian.
Yea, I completely jumped the gun.
It worked like it should for about 5 min.
Since then it is working intermittently but no where near as consistently as the stock 3.7 Rom 4G works.
it aint the rom itself .... 4G works fine with it .... keep searching...keep reading..
disable adfree - it causes slower performance on web browsing in other roms, so it's not a stretch.
Update your radio/PRI/PRL etc. There's a flashable upgrade zip in the development section, just wipe cache and dalvik and flash away and you're updated.
flash into recovery and wipe cache and dalvik. Issues have been known to be resolved by doing that.
try a new kernel - outdated kernels can cause all kinds of problems. Try netarchy's newest, a stock #15 kernel or MS79723's SBC #15 v7. They're all compatible with Myn's latest and greatest.
wipe data/cache/dalvik and reflash the rom. could've been a bad install.
re-download the rom and do the last thing. could've been a bad download.
Last ditch, download a different web browser (like dolphin hd) and see if the problem is all web browsing or restricted to just the stock internet app.
Here's the thing. WiMax works on Myn, thousands of people use it with no problems (me included, once upon a time) so it's definitely not the rom itself. The stock kernel should work with it as well. However, the kernel options I've listed above are good alternatives. If you can connect to 4g, then you have 4g so your keys are a-okay. Make sure you back them up though.
I hope this helps.
Evomaster said:
1. Download Rom and Radio/Wimax updates and place in the root of SDCard.
2. Reboot into Recovery.
3. Perform Nandroid backup
4. Minimally wipe dalvik and cache. For optimal experience, perform full wipe (data/dalvik/cache).
5. Flash the rom first.
6. Then the radio/wimax update. While the radios are flashing you'll see a little green arrow phone icon for a bit afterwords, Wait on this. You will then automatically be taken back to recovery.
7. Once back in recovery, reboot.
8. Enjoy"
( I Installed this and it did nothing ) For #6 No it did not do this when I installed it.
Click to expand...
Click to collapse
Same here. I have radio 2.15.00.09.01 and am trying to update this to get 4G to work.
My Step 6 Screen:
CloclworkMod Recovery v3.0.0.5
-- Installing: /sdcard/EVO_Radio2.15.00.11.19.zip
Finding update package...
Opening update package...
Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch ti Edify scripting (update-script and update-binary) to create working update zip packages.
Installation aborted.
adfree... try working wiith that app... it sounds like your issue.
you are running RLS5.. right?
MODS: I am unsure of where to post this so sorry for the trouble.
So I work for Tmobile and love showing off my rooted mytouch 4g in all its glory.
So I requested a warranty exchange and got a TAIWAN VERSION w/ GOOD SCREEN in return. Like Day and Night.
Upon Receiving my warranty exchange phone it was 2.2.1. I attempted the same Visionary Root Process, (however was there some extra file i needed to DL? i forget)
After rooting my new phone, S-Off, I had flashed FAUX stock kernel 0.4.0b.
THEN THIS HAPPENS:
I cant get past the mytouch 4g splash screen. The first logo that appears. It gets stuck or bootloops. I can HBOOT and get into recovery 3.0.0.5
This is all i can do...i already asked for another warranty exchange...but in the meanwhile..how can i fix this problem or what did i do wrong?
ALSO can you backup one mytouch 4g and load it back up on another mytouch 4g with the same sd card? Thanks!
I had this problem with my MT4G when I flashed his kernal. It seems that his kernals are not designed to work with every 4g device. I hope you did a nandroid backup on the device. I was never able to get past the mytouch splash screen with his kernals
Sent from my HTC Glacier using XDA App
Well, at since you can get into recovery there should be a number of things you can do to get your phone to boot.
Download a new ROM to flash, if you are on clockwork 3 then you need CM7.
Clockwork has usb drive ability, turn it on, transfer the ROM then flash.
If you can get into HBoot or Recovery on ANY phone, you're safe. Hell, if you can't get into HBoot, your phone wouldn't even start up since HBoot is basically the equivalent to BIOS.
THE VERSION OF CLOCKWORKMOD RECOVERY YOU USE IS CRITICAL!!!
The version you are using is for Android 2.3 only.
Flash a v2 Recovery with adb or fastboot and reinstall your kernel, or install CM7.
HTC Glacier CM7 41
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Tiltpoet said:
I am trying to do this. How would I get my comp.to.recognize the devise. Sometimes it says mass storage device detected sometimes not. So I need cm7 rom to b able.to boot?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
If you've ever connected it via USB, it should have installed the drivers automatically (at least on Windows). I think the ADB driver only installs if you had "USB Debugging" checked. Mass Storage usually only refers to mounting the SD card; the driver for ADB is different. Look for something like Android Phone or Android ADB Interface in your device manager (again assuming Windows).
If you have ADB set up, try running the adb devices command. If it spits back the serial number of your phone, you should be okay to proceed.
Don't exchange the phone, fix it...
Just use another phone to copy the latest CM7 to the root of your sdcard and flash, if that doesn't work do the same thing with a PD15IMG.zip file to the root of your sdcard, hboot and restore to stock.
I have no problem with someone doing a warranty exchange for a hardware issue, but if you break your phone, don't make someone else pay for it...
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
XDA you have been so helpful!
___bonus__also the haptic feedback on this phone was not as strong as my original..though idk if its just me or not..should i call tmobile and stop shipment of the OTHER phone? how is it i have a taiwan version plum W/ good screen?
There are no Sense-based Gingerbread (Android 2.3) ROMs available now ... Best practice its to make a Nandroid backup of CM7 with your installed CWM Recovery, then flash a version 2.x of CWM Recovery to install any Froyo (Android 2.2) based ROM.
HTC Glacier CM7 41
Tiltpoet said:
i ended up solving the problem by doing what some of you had suggested. I flashed CM7 and WAH-LaH! when the phone got past the splash screen into CM7 i was on cloud 9.
Now What are the benefits of running CM7? as opposed to going back to Sense w/ Faux kernel again?
PLUS
how would i go back to a sense type rom again? would i go back into rom manager and flash a different recovery?
Click to expand...
Click to collapse
Good to see it is working.
Its mostly personal preference at this point. Sense on the MT4G is pretty responsive and has some nice features. CM7 has its own tweaks and features. You loose the sense widgets but many can be replaced with alternatives in the market. You gain and loose relative in both ROMs So try out both and decide.
Use ROM Manager app to flash a new recovery. One of the 2. versions, then flash a froyo based ROM.
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Tiltpoet said:
what about flashing kernels..are those "roms"
is cm7 itself pretty battery efficient? i still downloaded setcpu and set it to 11---.
2.XXX ..u mean like 2.5.1.4 for example..sorry not lookin at the phone atm.
++bonus
i also dl the cynogyn updater or wut not..wut url do i add for themes?
Click to expand...
Click to collapse
Kernels are not ROMs, the kernel is the underlying software of an OS. The kernel talks to the hardware and lets different parts of the OS communicate. Kernels are ROM specific, or Framework specific. A sense ROM can not use a AOSP kernel and vice versa.
CM ROMs can be good on battery, or not. It all depends on personal use and how you set it up.
That is a good recovery to use when flashing sense ROMs.
Not sure about the updater. If it is the one I am thinking, it hasn't been updated in a while. I think it has been abandoned in favor of ROM Manager. CM updater did come in some of his older ROMs, before ROM manager became the norm.
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
As people have already said, you used the wrong version of clockwork, also, use clockwork to flash a new rom. And make sure you use the right version.
Tiltpoet said:
So I can or cannot flash fauxs kernel. I really liked the smartass profile. Also..I'm on cm 7 now...y do I get force closes on my market.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Try fix permissions. If that does not work, do a full wipe (factory reset). If that still does not work, try re-flashing the ROM.
If you flashed a new kernel before you started having issues, this may fix it, or you may need to wipe caches and re-flash the kernel.
I am having issues where any live wallpaper slows my evo down to a crawl. Originally I thoug ht it was due to a bad wipe and flash since I used rom manager along with clockwork mod. Now I flashed amon RA, wiped system and did a fresh install of cm7 7.0.3.1 along with tiamat SBC kernel and I continue to have issue.
Is there any fix?
Thank you
Hello
Ive just installes taboonay 2.1. It was working great until i reboot. Then superuser didnt want to allow apps such a setcpu and other even if their superuser status are still authorised
please help
the infamous taboonay 2.1 root problem... I had the same problem and restored to 2.0... only I still don't have root back? I'm confused
The same here
I had the same issue with taboonay 2.0, i thought it would be solved with 2.1, but as far as i know it's a common issue with new version of ROMs taboonay and honeyvillain.
I think it's a SU problem in general. Maybe it needs an upgrade or a new binary.
I'm using honeyvillain 1.2 and i have SU problems when apps try to get SU permissions at boot only. If i open them, they get SU permission immediately.
Ive found this and it worked
I don't know whether my way is useful to you or not.
I flash the rom, reboot fail to get the root. Then re-flash the rom and flash beta4 superuser as they given. Also fail after reboot.
Then I think why I flash the HoneyVillain rom but never lose root. It is also a HC3.2 rom. So I decide to mod the beta4 superuser zip file. I replace the both su and superuser.apk with the same files extracted from HoneyVillain rom and signed it. I fully wipe and re-install the rom and flash the su_mod.zip that I made and wait it ran. Ok! went into system and It got the root, then power down and started it again. Cool! still got the root. Tested by root explorer and terminal(command :su root).
Modified superuser, use cwm to install and must re-flash the rom or you will fail.
<a href="http://forum.xda-developers.com/attachment.php?attachmentid=727150&d=1316661095" >su_mod.zip</a>
Sent from my A500 using Tapatalk
reinstalling su 3.0 beta 4 got root back for mein 2.0 but not 2.1... something being restored by titanium backup in 2.1 seems to be causing the problem but with 2 boys under 5yrs old destroying my house as I type, I don't have time to try to figure out what's causing the headaches... so 2.0 for now I guess
oh well i did replace the superuser and still fail.
Now trying something else.
So far ive been booting my iconia more than 5 times and yet im still rooted.
Its weird.
What's your new trial if you don't mind my asking?
I noticed that whenever i ran full apps restore from Titanium Backup, followed by a reboot..my root is gone.
So i did carefully restore my apps. Apps that uses root functions i didnt restore em. E.g SetCPU.
But before my final flashing, these was my steps
1. Wipe steps (data/cache/dalvik)
2.Flash Taboonay 2.1
3.Flash su-3.0-beta4-efgh (from androidsu.com/3-0-beta)
4.Flashed Thor Kernel 3.4 (from tegraowners.com/?p=1005)
I noticed thor kernel 3.5 is out but i havent tested that
Then when restoring, make sure u restore apps that doesnt use root functions.
Here im still playing/customizing/rebooting almost 10 times and still rooted..
Good luck.
and that is without restoring any root apps? Did you fresh install setcpu or anything yet?
yes i didnt restore any root apps nor system apps. just normal apps/games
Root apps that i fresh install and using right now are
Titanium Backup 4.2.1
RootExplorer
RootCheck (to see whether device still rooted or not plus double confirm using terminal *su root)
So far i dont see the need of installing SetCPU since you can O.C through tabootools.
Only profile i need for O.C is when my screenon/off.
Ill keep playing with taboonay 2.1 and see whether i'll get root issues again
thanks ill have to give that a try later... I wasn't sure how well tabootools handled thors crazy new steps
okay dont forget to let me know whether it succeed or not on root issues =]
im wondering if pimp my cpu has the same effect on this as setcpu?
uninstall setcpu, now it will root and su works fine. Use other oc utility.
uninstallng didn't help I had to rewipe and install the rom again and I'm using system tuner... I really miss setcpu though... of course root is more important
ah so i was right after all
I uninstalled set cpu, and now I'm using tabootools for oc. Also I saw there is a final version of SU v3 on the android market and i upgraded my su in my x8 and now everything is fine.
Sent from my E15a using xda premium
I tried using the search function and just can't seem to find it.
I remember there was a collection of scripts that ran through adb where it had different options such as removing root and removing CWM and reinstalling the stock recovery. If someone can direct me to the download or the thread that would be great.
BTW I am on a stock rom/kernel with all the stock apps (modified the one click root to NOT remove the stock apps like Asphalt, etc.) but am rooted with CWM. I want to get my phone back and ready for the GB OTA. Thanks!
Nevermind, found it:
http://forum.xda-developers.com/showthread.php?t=808103
Instructions: watch video
http://www.youtube.com/watch?v=32dOsaIrdEc&feature=youtube_gdata_player
Edit: well darn. Lol
Sent from my Samsung Legendary 4G, a Universe UTES Phone, running "two. two"