Related
So i've rooted my phone using the unrevoked method... every time I reboot the phone I get a message about "operation failed, check super user something or other" yet when i look in super user permissions, unrevoked, and overclock widget are there... (these are the only apps i can think of that i've granted, or need super user permission) Is there any way to see which program/widget or whatever is throwing that error?
Pardon me if this is a newb question...
Thanks in advance for any help.
i only played with unrevoked briefly, but i believe that you have to open unrevoked and run it again each time you reboot. thats probably why you're getting the error. those apps can't get superuser permissions.
good luck!
SilverStone641 said:
i only played with unrevoked briefly, but i believe that you have to open unrevoked and run it again each time you reboot. thats probably why you're getting the error. those apps can't get superuser permissions.
good luck!
Click to expand...
Click to collapse
I used toast's rooting method first, then unrevoked and have no issues. Others have no issues with unrevoked without toast's method.
why would you use toasts AND unrevoked??? they both essentially do the same thing
hmmm. I seem to remember reading somewhere that they made the root stick on reboot. Maybe They were talking about the next version. Thanks for the tip.
SilverStone641 said:
why would you use toasts AND unrevoked??? they both essentially do the same thing
Click to expand...
Click to collapse
Well no actually they don't..You can't flash custom roms etc with unrevoked for example.
toast's and unrevoked DO NOT do the same thing. toast's gives you write permissions to /system while in recovery. unrevoked allows you to write a few things to /data while in android, but is otherwise useless. nothing currently writes to /system while in android. so, your problem is the overclock bit, because that probably messes with /system, to which nothing can write while in android. remove it, i bet you don't have the problem. unrevoked works well for installing things like wireless tether, not so much for other things.
and, unrevoked has been modified to reboot everytime you start the phone. you don't have to reapply it.
Basically, unrEVOked is useless if you already actually rooted with toast's method.
-------------
Sent from my HTC EVO 4G using Tapatalk Pro.
timothydonohue said:
and, unrevoked has been modified to reboot everytime you start the phone. you don't have to reapply it.
Click to expand...
Click to collapse
so then is there any way i can figure out why I'm getting an error when i reboot about "operation failed, check super user"
Ok so far i have updated my baseband to xxx15 and i have rooted my phone installed root explorer busybox etc, i have tried installing XRecovery 1000s of times and have done everything possible i just really want 2.2 froyo on my X8 and i've tried so many times to use XRECOVERY and have gone through every tutorial but it don't seem to work.
Are there any suggestions?
Any other ways to install froyo 2.2 custom roms onto my phone?
Post here the complete procedure you made, step by step.
Maybe anything is going wrong.
Don't give up
/youtube.com/watch?v=lPV6Ue5a0Ww
thats the way I make but with a different ROM it's easy Don't forget to make a backup of your data!
Firstly I updated my baseband to xxx15 and then I rooted using superoneclick and installed busybox from market then I got root explorer and placed the 3 recovery files in system bin and set permissions and mounted in RW and rebooted and clicked back button but nothing comes and have tried Apk xrecovery which still don't work....
Aren't there any other ways apart from using recovery to install custom time because in going crazy here.. I did that YouTube tutorial but it still didn't work.
don't hold the back key, you must tap it fast, when you hold it it will not work, just tap it!
I have beem tapping it but nothing happens
I was having the same exact problem, but then i used the Flash tool, and after click "ask root perms" i clicked "optimize" and after that my phone rebbot onto Xrecovery.
Could you give me a step by step guide through of what you did please?
I´ll try.
If you already done everything else the only thing left is to download the flash tool from here:
http://forum.xda-developers.com/showthread.php?t=986697
Then after download, open the flash tool, after open, you will see in the top some buttons, click on the one "ask root perms" first, and after click on the one that says "optimize".
When i did that the phone rebooted to Xrecovery.
If you have any doubts ask and i will try to help.
aaron187 said:
Firstly I updated my baseband to xxx15 and then I rooted using superoneclick and installed busybox from market then I got root explorer and placed the 3 recovery files in system bin and set permissions and mounted in RW and rebooted and clicked back button but nothing comes and have tried Apk xrecovery which still don't work....
Aren't there any other ways apart from using recovery to install custom time because in going crazy here.. I did that YouTube tutorial but it still didn't work.
Click to expand...
Click to collapse
It's like this, after you install busybox from market, the file you had in SD is changed, (really don't know why), so, the solution is the busybox file you have to move to System/bin, apart from chargemon and xrecovery, YOU must check it's size, busybox must have 700~ kbs, if not, download, or unzip current xrecovery given from many places (must be v0.1) and replace the correct busybox file with the wrong one inside sdcard.
So, YOU MUST BE CERTAIN the busybox file you are moving to system/bin has around 700kb~
I think you're done, reboot and good luck
ok ive tried this process but it still isnt working..........
i am having the exact same problem
I thought i was the only one!, seriously i need helpp aint there any other way to install custom roms,??
i heard somewhere you can use x10flashtool but i wont be the first one to try as i have had soo many problems in the last week its unreal. i cant even get the gingerbread theme on. can anybody post a full tutorial. i have freshly reformated my phone so its on adroid 2.1 and its blank. where do i go from here?
For all that could´t install, after you install busybox on the phone, did you go to the phone, open busybox and install?
yh i installed Busybox after download from market......... and yh i did go to busybox on phone and install but still no luck
Drakenfall said:
For all that could´t install, after you install busybox on the phone, did you go to the phone, open busybox and install?
Click to expand...
Click to collapse
Have you ever tried installed Busybox by installing Titanium Backup. tap the lower middle button to let it replaced by a workable one from the Market automatically, right after placing the three files you mentioned above?
This little trick may help...
... I'm NOW running Floyo2.2 beta v0.15 happily with this method for a couple of days, with multiple reboot from the beginning, but the rebooting problem is gone.
My favourite TrackID doesn't work in this beta, but I simply replaced it with Shazam ;-)
Drakenfall said:
I´ll try.
If you already done everything else the only thing left is to download the flash tool from here:
http://forum.xda-developers.com/showthread.php?t=986697
Then after download, open the flash tool, after open, you will see in the top some buttons, click on the one "ask root perms" first, and after click on the one that says "optimize".
When i did that the phone rebooted to Xrecovery.
If you have any doubts ask and i will try to help.
Click to expand...
Click to collapse
OMG OMG THANK YOU!!!!! SO MUCH!! it worked, YOU SIR ARE THE BESTTTTT
I just send you a solution but it doesnt let me send you the link for the files.....search this forum is a clear solution that works every time on me.....good luck
aaron187 said:
OMG OMG THANK YOU!!!!! SO MUCH!! it worked, YOU SIR ARE THE BESTTTTT
Click to expand...
Click to collapse
I´m glad i could help.
Hello
Ive just installes taboonay 2.1. It was working great until i reboot. Then superuser didnt want to allow apps such a setcpu and other even if their superuser status are still authorised
please help
the infamous taboonay 2.1 root problem... I had the same problem and restored to 2.0... only I still don't have root back? I'm confused
The same here
I had the same issue with taboonay 2.0, i thought it would be solved with 2.1, but as far as i know it's a common issue with new version of ROMs taboonay and honeyvillain.
I think it's a SU problem in general. Maybe it needs an upgrade or a new binary.
I'm using honeyvillain 1.2 and i have SU problems when apps try to get SU permissions at boot only. If i open them, they get SU permission immediately.
Ive found this and it worked
I don't know whether my way is useful to you or not.
I flash the rom, reboot fail to get the root. Then re-flash the rom and flash beta4 superuser as they given. Also fail after reboot.
Then I think why I flash the HoneyVillain rom but never lose root. It is also a HC3.2 rom. So I decide to mod the beta4 superuser zip file. I replace the both su and superuser.apk with the same files extracted from HoneyVillain rom and signed it. I fully wipe and re-install the rom and flash the su_mod.zip that I made and wait it ran. Ok! went into system and It got the root, then power down and started it again. Cool! still got the root. Tested by root explorer and terminal(command :su root).
Modified superuser, use cwm to install and must re-flash the rom or you will fail.
<a href="http://forum.xda-developers.com/attachment.php?attachmentid=727150&d=1316661095" >su_mod.zip</a>
Sent from my A500 using Tapatalk
reinstalling su 3.0 beta 4 got root back for mein 2.0 but not 2.1... something being restored by titanium backup in 2.1 seems to be causing the problem but with 2 boys under 5yrs old destroying my house as I type, I don't have time to try to figure out what's causing the headaches... so 2.0 for now I guess
oh well i did replace the superuser and still fail.
Now trying something else.
So far ive been booting my iconia more than 5 times and yet im still rooted.
Its weird.
What's your new trial if you don't mind my asking?
I noticed that whenever i ran full apps restore from Titanium Backup, followed by a reboot..my root is gone.
So i did carefully restore my apps. Apps that uses root functions i didnt restore em. E.g SetCPU.
But before my final flashing, these was my steps
1. Wipe steps (data/cache/dalvik)
2.Flash Taboonay 2.1
3.Flash su-3.0-beta4-efgh (from androidsu.com/3-0-beta)
4.Flashed Thor Kernel 3.4 (from tegraowners.com/?p=1005)
I noticed thor kernel 3.5 is out but i havent tested that
Then when restoring, make sure u restore apps that doesnt use root functions.
Here im still playing/customizing/rebooting almost 10 times and still rooted..
Good luck.
and that is without restoring any root apps? Did you fresh install setcpu or anything yet?
yes i didnt restore any root apps nor system apps. just normal apps/games
Root apps that i fresh install and using right now are
Titanium Backup 4.2.1
RootExplorer
RootCheck (to see whether device still rooted or not plus double confirm using terminal *su root)
So far i dont see the need of installing SetCPU since you can O.C through tabootools.
Only profile i need for O.C is when my screenon/off.
Ill keep playing with taboonay 2.1 and see whether i'll get root issues again
thanks ill have to give that a try later... I wasn't sure how well tabootools handled thors crazy new steps
okay dont forget to let me know whether it succeed or not on root issues =]
im wondering if pimp my cpu has the same effect on this as setcpu?
uninstall setcpu, now it will root and su works fine. Use other oc utility.
uninstallng didn't help I had to rewipe and install the rom again and I'm using system tuner... I really miss setcpu though... of course root is more important
ah so i was right after all
I uninstalled set cpu, and now I'm using tabootools for oc. Also I saw there is a final version of SU v3 on the android market and i upgraded my su in my x8 and now everything is fine.
Sent from my E15a using xda premium
Currently Running Miui 2.7.1.3 i believe the numbers are, whichever the latest version of the rom is. It installed no problem, was merely updating to try to fix theme issues from 2.6, and here is where the problem begins:
So i was browsing my phone and realised that i didn't have superuser on there, wondering why because usually every rom i ever ran had it automatically on there, installed it off of another site, the elite version, and from there everything got screwed up, i don't know what happened or why it started but, i could no longer run busybox, TBU, setcpu, nothing that requires root, due to the fact that superuser was denying root. I had no clue why, i've been reading threads for hours similar to "Superuser denying root" and such, and to no avail, the problem is still there, i have set superuser to both prompt and allow when asking for root, and neither worked, so i figured a clean fresh reflash of MIUI would help, however even after wiping and a clean install, root does not work, ive read some articles describing to just unroot and root again however it's been so long since ive rooted a phone, can anyone direct me to the best way to do this without having to do an ODIN and set up my phone allover again, keep in mind that it is still S-Off. What am i doing wrong?
I also have tried to clear data for superuser, as well as install multiple versions, neither have worked.
Any help is greatly appreciated!
ROBLEM SOLVED:
To those with similar problems to this who have ruled out other reasons, described in this thread, abandon Superuser and download SuperSU instead, it fixed my problem.
Odin is for Samsung Phones and if u lost root redownload the rom or Google super user and download the binaries and just flash them.
Sent from my Dark Unicorn Resurrected v.2.5 using Tapatalk 2
I tried all that, anyway im in the middle of a stock restore right now and trying to reroot but stuck at the damn visionary step >.<
I am now stuck with S-on and back in a stock rom, downgraded, and visionary still doesnt work, i give up
Try gfree method
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Jack_R1 said:
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Click to expand...
Click to collapse
I believe you got two troubleshootings steps backwards.
After you have searched and exhausted every troubleshooting step you found (which obviously wasn't thorough), you should have posted in the MIUI thread about the problem. They might have scolded you a little before answering, but you would have gotten your answer.
Flashing back to stock is ALWAYS your last resort. It should only be done after scouring the web for answers, then asking for the answer, and when there is no other alternative - FroYo PD15IMG.zip.
Jack is blunt, but as he's as right as always.
I'm not one to deny mistakes, that sure was stupid of me not to look, i guess i just thought there were deeper problems than just the rom having it turned off, anyway i'm doing the downgrade now and it should work, thank you for the help its appreciated
Jack_R1 said:
You're very likely doing so much wrong..
MIUI has an option in settings - "allow superuser privileges". You didn't turn it on, and it's off by default. That's it. And from there you went to a whole new level of going the wrong way.
No amount of restoring to stock and re-rooting can help you. Root privileges aren't phone-specific, they're ROM-specific, and relevant only for the ROM currently on the phone. Reflash the ROM with something else - and existence or inexistence of root will depend on this "something else". Thus I fail to understand, what were you looking for when restoring to stock. It was as irrelevant as could possibly be.
Click to expand...
Click to collapse
Could you point me to this "allow superuser privileges"? I have restored with recovery and have yet to find such a setting.
If you are referring to the permission guard, it allows everything, and there is no setting to simply turn it on
No, not this one. It's been some time since I sold my Nexus One, which was running MIUI back at the time, but I understand that in the newer MIUI there is an app or setting, called LBC guard, which controls both Superuser access and app permissions. Try looking it up.
P.S. I remember CM team member post, saying that the newer CM9 also come with root privileges turned off by default, because they decided it's a safer way.
Right, and the Permission Guard is run by LBC guard, there is no way to set anything different from what i have, i believe its a problem with the busybox binaries and superuser binaries, i'm trying to use this SuperSU instead of superuser to see if that will work. If i remember correctly before all this happened i may have hit uninstall busybox by accident and that may be why its not working, could be that ive never had busybox working and haven't been able to install it due to the SU problem
EDIT: Yes i have solved it now, SuperSU actually makes the prompts for superuser come up now, im using it instead of superuser entirely, must be deeper problems with original superuser
If you had SuperSU installed on the system and additionally installed the regular Superuser, or the other way around - these two are incompatible on binaries AFAIK, and mixing the applications without cleaning up the build and using the correct binary could cause what you were experiencing.
Yes your probably correct only i had two separate versions of superuser that didnt overwrite and that must be where the binaries got messed up
The 1st thing I usually do when I install a new rom, is install SuperSU, update the binaries then I use Titanium to uninstall Superuser.
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Drakona.cookie said:
Currently Running Miui 2.7.1.3 i believe the numbers are, whichever the latest version of the rom is. It installed no problem, was merely updating to try to fix theme issues from 2.6, and here is where the problem begins:
So i was browsing my phone and realised that i didn't have superuser on there, wondering why because usually every rom i ever ran had it automatically on there, installed it off of another site, the elite version, and from there everything got screwed up, i don't know what happened or why it started but, i could no longer run busybox, TBU, setcpu, nothing that requires root, due to the fact that superuser was denying root. I had no clue why, i've been reading threads for hours similar to "Superuser denying root" and such, and to no avail, the problem is still there, i have set superuser to both prompt and allow when asking for root, and neither worked, so i figured a clean fresh reflash of MIUI would help, however even after wiping and a clean install, root does not work, ive read some articles describing to just unroot and root again however it's been so long since ive rooted a phone, can anyone direct me to the best way to do this without having to do an ODIN and set up my phone allover again, keep in mind that it is still S-Off. What am i doing wrong?
I also have tried to clear data for superuser, as well as install multiple versions, neither have worked.
Any help is greatly appreciated!
ROBLEM SOLVED:
To those with similar problems to this who have ruled out other reasons, described in this thread, abandon Superuser and download SuperSU instead, it fixed my problem.
Click to expand...
Click to collapse
Anyone else with this problem go in the permissions app and enable root as miui uses its own root for security reasons.
Sent from my T-Mobile MyTouch 4g using xda premium
MIUI uses a customized superuser app. Use it and follow the instructions. Cnote ports the ROM. He knows what he's talking about.
Hello, I am a newbie and looking for a miracle. I am going to apologize for the length of this message in advance. Couple days ago I perm rooted the HTC Glacier Mytouch 4g using the instructions at //wiki.cyanogenmod.org/w/Install_CM_for_glacier . As instructed, I downgraded the software to 1.17.531.2 and then perm rooted with S-Off on the device. Then, I installed the cyanogenMod 7.2.0-glacier (stable version) with the google apps. Everything worked great and was happy.
Right after I installed AdFree from Googleplay, I had issues but problem may not be caused by this app. Googleplay gave me a message of an “error no connection”. I got a message that the “ADWLauncher failed to launch” over and over again which prevented me from doing anything else. I was able to reboot the phone in between the notifications of the ADWLauncher failure. When I was back up and running, I got the same message of Googleplay “error no connection” and ADW failure very quick after start up. I pulled the battery and did a hard power up (volume down plus power button at same time). This is when things got worse. The Hboot starts up and wants to update, which I did but then I could not choose recovery mode to install a backup. If I choose not to update Hboot, then I only have the option to restart the phone. I can see on top of the screen “Glacier PVT SHIP S-OFF” .
Wait – things get worse. I am no longer running the cyanogenmod ROM but am back to the downgraded ROM 1.17.531.2. I still can’t download from googleplay because I get the message “Error no connection”, even though I am running on the old ROM. I can’t download apps from the phone, but I can push apps to phone from my googleplay account. I did push the ROM Manager app to the phone. When I start the ROM Manager, I get the message “You must root phone for ROM to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
I tried to start the recovery through adb using “adb reboot recovery”, but I get a power off symbol (a red circle) and phone freezes. I need to pull the battery to reboot.
Again sorry for the length. I am hoping for a miracle. Since I can’t do anything in the hard power up mode, I need to find a way to fix through adb or fastboot. Does anyone know how to get the Superuser installed through adb or fastboot? Is there a way to flash another custom ROM that has a superuser installed through adb or fastboot?
BTW. Gmail works fine.
thanks
Droid-2 said:
Hello, I am a newbie and looking for a miracle. I am going to apologize for the length of this message in advance. Couple days ago I perm rooted the HTC Glacier Mytouch 4g using the instructions at //wiki.cyanogenmod.org/w/Install_CM_for_glacier . As instructed, I downgraded the software to 1.17.531.2 and then perm rooted with S-Off on the device. Then, I installed the cyanogenMod 7.2.0-glacier (stable version) with the google apps. Everything worked great and was happy.
Right after I installed AdFree from Googleplay, I had issues but problem may not be caused by this app. Googleplay gave me a message of an “error no connection”. I got a message that the “ADWLauncher failed to launch” over and over again which prevented me from doing anything else. I was able to reboot the phone in between the notifications of the ADWLauncher failure. When I was back up and running, I got the same message of Googleplay “error no connection” and ADW failure very quick after start up. I pulled the battery and did a hard power up (volume down plus power button at same time). This is when things got worse. The Hboot starts up and wants to update, which I did but then I could not choose recovery mode to install a backup. If I choose not to update Hboot, then I only have the option to restart the phone. I can see on top of the screen “Glacier PVT SHIP S-OFF” .
Wait – things get worse. I am no longer running the cyanogenmod ROM but am back to the downgraded ROM 1.17.531.2. I still can’t download from googleplay because I get the message “Error no connection”, even though I am running on the old ROM. I can’t download apps from the phone, but I can push apps to phone from my googleplay account. I did push the ROM Manager app to the phone. When I start the ROM Manager, I get the message “You must root phone for ROM to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
I tried to start the recovery through adb using “adb reboot recovery”, but I get a power off symbol (a red circle) and phone freezes. I need to pull the battery to reboot.
Again sorry for the length. I am hoping for a miracle. Since I can’t do anything in the hard power up mode, I need to find a way to fix through adb or fastboot. Does anyone know how to get the Superuser installed through adb or fastboot? Is there a way to flash another custom ROM that has a superuser installed through adb or fastboot?
BTW. Gmail works fine.
thanks
Click to expand...
Click to collapse
I would download a recovery image and use fastboot to install it. Maybe something is wrong with your recovery.
fastboot flash recovery recoveryname.img
Then wipe system, do a factory reset, and wipe dalvik-cache before flashing a ROM. Also, re-download your ROM.
estallings15 said:
I would download a recovery image and use fastboot to install it. Maybe something is wrong with your recovery.
fastboot flash recovery recoveryname.img
Then wipe system, do a factory reset, and wipe dalvik-cache before flashing a ROM. Also, re-download your ROM.
Click to expand...
Click to collapse
Thanks - I will need to try this later
Thanks to alephzain, bbelos/CMTeamEpic, DRockstar, koush, neldar, QBKing77, and toadlife!
See a change log of edits to this post at the bottom. Any corrections or suggestions are welcomed.
This How To will explain how you can root and install ClockworkMod on a stock Epic 4G (SPH-D700) running Gingerbread FC09 without a USB cable, Odin, and with or without a computer. My phones USB pins are busted, but otherwise it charges fine and works great. So I spent many determined days figuring out how I may eventually install CyanogenMod. This first requires getting ClockworkMod on the phone.
IMPORTANT NOTE: Be sure to follow the exact procedure below.
How will you get files onto your phones external sdcard?
Novice:
- Without a computer: Download files using a browser found in the Google Play Store: Firefox, Dolphin.
- With a computer: Email yourself the files and use your phones email app to save them to your sdcard.
- With a computer: Remove your external sdcard, insert it into an adapter, then insert/connect it to your computer to copy files to the sdcard.
Expert:
- With a computer: Its possible to access "offline files" with Google Drive, but its a bit cumbersome to find the file using a file manager.
- With WiFi and a computer: After gaining root, install the "WiFi ADB" app and download the Android ADB tools for your OS: Windows, Mac OS X, Linux
Transfer the following files to your sdcard (see attachments below):
- Framaroot-1.6.1.apk
- CleanGB_Kernel_0b28e9767b.zip
- cwm-5.0.2.7-epic4g.zip
Get Rooted:
- On your phone go to Settings -> Applications -> Check: Unknown Sources
- Install the Framaroot-1.6.1.apk package.
Install the following apps from the Google Play Store:
- SGS Kernel Flasher
- ROM Manager
Start SGS Kernel Flasher:
- Backup your stock kernel, but if you re-flash your stock kernel then you will need to repeat the following procedures.
- Choose Kernel -> Select CleanGB_Kernel_0b28e9767b.zip -> Flash Kernel
- Reboot
Start ROM Manager:
- Select Reboot into Recovery
Recovery Mode:
- Press the Settings icon: You should now be in CWM v3.1.0.1 (use volume up/down, camera to select, home to go back)
- Select: install zip from sdcard -> toggle signature verification -> choose zip from sdcard -> cwm-5.0.2.7-epic4g.zip
- Reboot
Verify CWM Installed:
- Power off phone, wait a few seconds after vibration indicates phone is powered off.
- Hold down: Volume Down, Camera, and Power On.
- Release when the icons light up.
- You should see "CWM-based Recovery v5.0.2.7" and the menu in blue text.
Congratulations you flashed ClockworkMod without USB or Odin!
What now? How about installing CyanogenMod? Well thats my next step and I highly suggest your phone already be activated, the PRL updated, data/contacts synced/backed up, and all services working before installing CyanogenMod stable. Otherwise, as of today (CM v10.1), you will need to temporarily boot into Samsungs FC09 in order to perform these functions.
I hope you find this How To helpful. Feel free to aks any questions, but please Google search for any "inbetween steps" that I have left out of this How To for the purpose of brevity.
Good luck!
Change Log:
12/08/2013: (Major Addition) Added important note. Added backing up stock kernel.
11/21/2013: (Minor Addition) Added email method for transferring files to your sdcard. Clean up.
11/20/2013: (Minor Addition) In case their sources disappear I have attached the required files.
11/18/2013: (Minor Correction) Improved links. Clean up.
11/17/2013: (Major Correction) Corrected spelling of Framaroot-1.6.1.apk filename.
11/16/2013: (Minor Correction) After installing CyanogenMod 10.1 (STABLE) I realized the above version CWM is not the latest.
Appreciate the effort and updated info.
Mr_You said:
Thanks to alephzain, bbelos/CMTeamEpic, DRockstar, koush, neldar, QBKing77, and toadlife!
See a change log of edits to this post at the bottom. Any corrections or suggestions are welcomed.
This How To will explain how you can root and install ClockworkMod (CWM) on a stock Epic 4G (SPH-D700) running FC09 without a USB cable, Odin, and with or without a computer. My phones USB pins are busted, but otherwise it charges fine and works great. So I spent many determined days figuring out how I may eventually install CyanogenMod. This first requires getting ClockworkMod on the phone.
How will you get files onto your phones external sdcard?
Novice:
- Without a computer: Download files using a browser found in the Google Play Store: Firefox, Dolphin.
- With a computer: Email yourself the files and use your phones email app to save them to your sdcard.
- With a computer: Remove your external sdcard, insert it into an adapter, then insert/connect it to your computer to copy files to the sdcard.
Expert:
- With a computer: Its possible to access "offline files" with Google Drive, but its a bit cumbersome to find the file using a file manager.
- With WiFi and a computer: After gaining root, install the "WiFi ADB" app and download the Android ADB tools for your OS: Windows, Mac OS X, Linux
Transfer the following files to your sdcard (see attachments below):
- Framaroot-1.6.1.apk
- CleanGB_Kernel_0b28e9767b.zip
- cwm-5.0.2.7-epic4g.zip
Get Rooted:
- On your phone go to Settings -> Applications -> Check: Unknown Sources
- Install the Framaroot-1.6.1.apk package.
Install the following apps from the Google Play Store:
- SGS Kernel Flasher
- ROM Manager
Start SGS Kernel Flasher:
- You may backup your kernel, but if you re-flash your stock kernel then you will need to repeat the following procedures.
- Choose Kernel -> Select CleanGB_Kernel_0b28e9767b.zip -> Flash Kernel
- Reboot
Start ROM Manager:
- Select Reboot into Recovery
Recovery Mode:
- Press the Settings icon: You should now be in CWM v3.1.0.1 (use volume up/down, camera to select, home to go back)
- Select: install zip from sdcard -> toggle signature verification -> choose zip from sdcard -> cwm-5.0.2.7-epic4g.zip
- Reboot
Verify CWM Installed:
- Power off phone, wait a few seconds after vibration indicates phone is powered off.
- Hold down: Volume Down, Camera, and Power On.
- Release when the icons light up.
- You should see "CWM-based Recovery v5.0.2.7" and the menu in blue text.
Congratulations you flashed ClockworkMod without USB or Odin!
What now? How about installing CyanogenMod? Well thats my next step and I highly suggest your phone already be activated, the PRL updated, data/contacts synced/backed up, and all services working before installing CyanogenMod stable. Otherwise, as of today (CM v10.1), you will need to temporarily boot into Samsungs FC09 in order to perform these functions.
I hope you find this How To helpful. Feel free to aks any questions, but please Google search for any "inbetween steps" that I have left out of this How To for the purpose of brevity.
Good luck!
Change Log:
11/21/2013: (Minor Addition) Added email method for transferring files to your sdcard. Clean up.
11/20/2013: (Minor Addition) In case their sources disappear I have attached the required files.
11/18/2013: (Minor Correction) Improved links. Clean up.
11/17/2013: (Major Correction) Corrected spelling of Framaroot-1.6.1.apk filename.
11/16/2013: (Minor Correction) After installing CyanogenMod 10.1 (STABLE) I realized the above version CWM is not the latest.
Click to expand...
Click to collapse
This rooting method works, but i have a problem.
The kernel has the su binary installed, nd thats the problem; with a root checker it says no root access. Now i cant do anything else because everytime i do something to fix this issue, it stays the same after a reboot
Please help me
TheKillah512 said:
This rooting method works, but i have a problem.
The kernel has the su binary installed, nd thats the problem; with a root checker it says no root access. Now i cant do anything else because everytime i do something to fix this issue, it stays the same after a reboot
Please help me
Click to expand...
Click to collapse
The purpose of the CleanGB kernel is to provide CWM v3.1.0.1. You only need to install Framaroot to root the phone.
I'm not exactly sure where you are stuck or what you are trying to achieve. I tried duplicating the process, but it is entirely possible that I made an error so any corrections are helpful.
Mr_You said:
The purpose of the CleanGB kernel is to provide CWM v3.1.0.1. You only need to install Framaroot to root the phone.
I'm not exactly sure where you are stuck or what you are trying to achieve. I tried duplicating the process, but it is entirely possible that I made an error so any corrections are helpful.
Click to expand...
Click to collapse
Mr_You said:
The purpose of the CleanGB kernel is to provide CWM v3.1.0.1. You only need to install Framaroot to root the phone.
I'm not exactly sure where you are stuck or what you are trying to achieve. I tried duplicating the process, but it is entirely possible that I made an error so any corrections are helpful.
Click to expand...
Click to collapse
Yes, im sorry that i have to make u go through all this trouble because maybe im doing this wrong..
What i was trying to say is that the kernel also has 'su' in /sbin (im not sure if this is the problem but in my galaxy s3 the 'su' is only located in /system/bin and /system/xbin)
I also read this article where it said that the 'su binary' isnt supposed to be in /sbin because in this case (what i think its saying is) that everytime it boots up the /sbin is part of the booting process. Here is the website link: htt p://a ndro idsu.co m (cant post links yet damn)
" People with the su binary located in /sbin have a much tougher time. I’ve found that these are mostly Samsung users (with the notable exception of the Nexus S). I don’t know why it’s done this way, and if anybody does know, please let me know, but for some reason kernel and ROM devs for these devices put su in /sbin. /sbin is part of the boot.img, and therefore any modifications to that directory will be erased on boot."
What i first did is installed Framaroot nd rooted the phone, then got excited because i had been trying to root it for like 2 years now with no success, so since i thought i knew what i was doing, i trailed off nd tried to install CWMR through Rom Manager then went into recovery nd for some weird reason it just put me in the stock android recovery so i knew something went wrong... Then i got scared nd tried to go back to your method nd installed the kernel flasher so i flashed the kernel, rebooted, nd then went into the superuser app. It said the SU binary needed to be updated (got surprised because it didnt say that before i flashed the kernel) i put continue nd it showed me an option to install it through TWRC/CWMR or install normally,so i chose through CWM nd it actually booted me up into CWM but then it said something about a command not working [it was some couple days ago so i cant remember what it said exactly] so i messed around with CWM and tried to installed CyanogenMod which i had downloaded previously, did the signature verification toggle off, but it still said installation aborted because of the command or something... Then i rebooted the phone nd then the problems started, in the superSU app i tried to install normally but it said installation failed... Got the root checker nd said su found in /sbin /system/bin and /system/xbin but i had no root access so i panicked nd tried to root it again with Framaroot, it said success nd i rebboted but it didnt work. I ran the root checker again nd it was the same. I tried to go back to a backup i did when i only had root without the kernel but(which by the way by the end of the backup it said couldnt make md5 sums)but idk why but it took me to the stock android recovery so i couldnt make a restore. I felt trapped cs i couldnt go back to before i had the kernel. With no root access i couldnt also do the restore to the stock kernel(SGS Kernel Flasher app) because i made a backup of it in case something went wrong.. Unfortunately it did so now with no root access i cant really do nothing anymore... I was thinking of using odin to go back to its original state, but then i remembered that it was impossible because odin never recognized my phone while in download mode... Im short in options on what to do please help, im still a noob
Can you try to do a factory reset from the stock recovery and start over?
Mr_You said:
Can you try to do a factory reset from the stock recovery and start over?
Click to expand...
Click to collapse
Yes, thats exactly what i did two times but it didnt work because once you flash something theres no way to go back unless you have a backup and a way to restore it or is there a way i dont know of?? I also checked right after the factory reset in the settings nd it still had the same kernel, and the root checker still said the su binaries were installed in the 3 places i mentioned earlier nd still without root access
TheKillah512 said:
Yes, thats exactly what i did two times but it didnt work because once you flash something theres no way to go back unless you have a backup and a way to restore it or is there a way i dont know of?? I also checked right after the factory reset in the settings nd it still had the same kernel, and the root checker still said the su binaries were installed in the 3 places i mentioned earlier nd still without root access
Click to expand...
Click to collapse
EDIT: If you have tried this procedure on a Galaxy S3 then I would suggest this discussion be continued on the appropriate forum.
Mr_You said:
EDIT: If you have tried this procedure on a Galaxy S3 then I would suggest this discussion be continued on the appropriate forum.
Click to expand...
Click to collapse
No, lets get this straight. I already rooted my gs3 a long time ago nd i didnt use this procedure with it. I used this procedure with my Epic
TheKillah512 said:
No, lets get this straight. I already rooted my gs3 a long time ago nd i didnt use this procedure with it. I used this procedure with my Epic
Click to expand...
Click to collapse
I assume you've already tried uninstalling any SU-type packages?
Mr_You said:
I assume you've already tried uninstalling any SU-type packages?
Click to expand...
Click to collapse
Yes i did.. In the SuperSU app in the settings section it has an option to Full Unroot, nd i think it works but it has to reboot, and at the time of reboot, the kernel overrides it and gets rid of any modifications like getting unrooted..
Looks like im going to have to bear with this nd just leave it like that, besides i already have a rooted gs3
TheKillah512 said:
Yes i did.. In the SuperSU app in the settings section it has an option to Full Unroot, nd i think it works but it has to reboot, and at the time of reboot, the kernel overrides it and gets rid of any modifications like getting unrooted..
Looks like im going to have to bear with this nd just leave it like that, besides i already have a rooted gs3
Click to expand...
Click to collapse
So your are running CleanGB? When you open ROM Manager and select "Boot into Recovery" does it boot into CWM v3 and are you able to flash CWM v5 or do you still get the error?
Mr_You said:
So your are running CleanGB? When you open ROM Manager and select "Boot into Recovery" does it boot into CWM v3 and are you able to flash CWM v5 or do you still get the error?
Click to expand...
Click to collapse
Yes i am running CleanGB nd when i use rom manager and select "Boot into Recovery" it does nothing because i dont have root access and that means it doesnt have permissions to boot into recovery, however i did also try to manually boot into recovery but it took me to the stock recovery.. Is this supposed to happen??
TheKillah512 said:
Yes i am running CleanGB nd when i use rom manager and select "Boot into Recovery" it does nothing because i dont have root access and that means it doesnt have permissions to boot into recovery, however i did also try to manually boot into recovery but it took me to the stock recovery.. Is this supposed to happen??
Click to expand...
Click to collapse
Yes that is normal.
I see you say you tried reinstalling Framaroot, but try reinstalling again. But don't reboot. Afterwards go straight into ROM Manager and select "Boot into Recovery" and if rooting was successful I believe it should boot into CleanGBs CWM v3 recovery.
It did boot up into CWM v3 nd i tried to flash the CWM v5 but there were these weird things, look ill show u a picture of it.
Sent from my SPH-L710 using XDA Premium 4 mobile app
TheKillah512 said:
It did boot up into CWM v3 nd i tried to flash the CWM v5 but there were these weird things, look ill show u a picture of it.
Click to expand...
Click to collapse
For some reason all the forums posts images are broken for me. It seems to be a 404 error.
Ok lets try this:
Make sure you are rooted (install Framaroot again if you need to, don't reboot) and start SGS Kernel Flasher and flash your backup backed up stock kernel and reboot. Then try following the procedure again from the top as described to try to install CWM. Rebooting your stock kernel may or may not fix these issues. If it doesn't then it may require finding a way to fix it via a Terminal app or other method.
I seem to be rooted in some ways but not in others
I installed Framaroot and it claimed success. However, that doesn't seem to be true according to the Root Checker app. I removed Framaroot, rebooted, reinstalled, and reran it with no difference. But what's weird is the first time it seemed to work, so I went ahead and tried to flash CleanGB and it worked. I'm currently running CleanGB.
The problem now is that when I ask ROM Manager to Boot into Recovery it won't do it, presumably because I don't have root access. What can I do next? Any suggestions are appreciated!
cdupree said:
The problem now is that when I ask ROM Manager to Boot into Recovery it won't do it, presumably because I don't have root access. What can I do next? Any suggestions are appreciated!
Click to expand...
Click to collapse
I would try reinstalling Framaroot (and don't reboot) then: Start ROM Manager->Reboot into Recovery
cdupree said:
I installed Framaroot and it claimed success. However, that doesn't seem to be true according to the Root Checker app. I removed Framaroot, rebooted, reinstalled, and reran it with no difference. But what's weird is the first time it seemed to work, so I went ahead and tried to flash CleanGB and it worked. I'm currently running CleanGB.
The problem now is that when I ask ROM Manager to Boot into Recovery it won't do it, presumably because I don't have root access. What can I do next? Any suggestions are appreciated!
Click to expand...
Click to collapse
Thats exactly what is happening to me too, friend...
Sent from my SPH-L710 using XDA Premium 4 mobile app
TheKillah512 said:
Thats exactly what is happening to me too, friend...
Click to expand...
Click to collapse
Sorry you're mistaken. You just posted a pic of CWM v3. So your "Reboot into Recovery" from ROM Manager worked.
Did you try what I suggested here to fix your errors?