Related
Hello, I have some problems with my mob.phone HTC HD2: after using Flash mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Thanks for Help.
Same problem......
I am also stuck in the white HTC screen, (R 2.06.51.07 G 15.30.50.07U D 1.66.76641). I can flash from SD card and so i tried, using the image in the latest official RRU, no way, it doesn't fix the problem.
I didnt try any unofficial rom, i just updated to the latest rom from HTC, it worked fine. The problem occurs after i had to restart the phone while trying to connect to a xifi AP...
Any idea what i should try now ?
Thanks. You saved my day.
samsamuel said:
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Click to expand...
Click to collapse
OMG! Thank you so much! I love you!!!!!! I was stuck on boot because my flash failed and i followed your instructions and now i can flash again!!! i was so worried and if it weren't for you i would be screwed. Really you are a HUGE help! Keep the good work up
how long did you guys have to wait till the htc rebooted after that flash? cause ive been waiting for over 30 minutes and i thought i made that wrong.
Note: ive used HSPL fist, then flashed it with energyleo.23547, but energyleo kept stuck in bootloader
now im pretty afraid of loosing manufactors warranty ...
well lads, pay attention: ive fixed that my problem all by myself. HINT: ive kept holding the buttons for to long, so the device got stock while starting up. so dont press the voldown-button for too long, maybe only for 2 seconds!
hard reset
Remember boys and girls - if you get stuck on the bootloader you can also do the following:
1. Remove the battery to turn the phone off, leave 3 seconds
2. Replace battery and hold down the vol down button and turn on your device to get into the bootloader
3. It should say 'serial'. Plug your USB cable in and it'll change to 'USB'
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
EddyOS said:
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
Click to expand...
Click to collapse
im pretty sure that flashing over usb won't do the spl. only sd card flashing can touch the spl.
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
EddyOS said:
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
Click to expand...
Click to collapse
I'd be inclined to suspect that In your case the spl was flashed during the failed sd card flash, so was already stock spl when you then flashed the stock rom over usb.(which of course being stock doesn't need hspl )
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
buddyrich_1 said:
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
Click to expand...
Click to collapse
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Hey
Thanks for replying. Do I get the stock ROM from the HTC website, is there a way to get it as a .nbh file as I am currently on a mac.
thanks
Tokolosh said:
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Click to expand...
Click to collapse
White Screen and HTC logo
I have found a similar problem, I flashed the HSPL rom following the instructions to the letter in the NOOB section.
Restarted my HTC HD2 having hard reset, and it would start and begin the installation and setup, once the setup completes, the software requests a soft reset, at this point my phone hangs on the white boot up screen with the HTC logo.
What am I doing wrong?
Stuck on White HTC Screen after ROM update
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
jrmgolem said:
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
Click to expand...
Click to collapse
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
samsamuel said:
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
Click to expand...
Click to collapse
I have now installed a 'Leo_RADIO_15.31.50.07U_2.07.51.05 **(from HTC **???? )' then re-installed the Energy Rom, but still getting stuck at the white boot screen after the first reboot, so I have now done a hard reset and the phone still hangs...
Any more ideas?
i got this phone 1 day, and it's already dead
i installed hspl, and a custom wwe rom, it was working fine. But then it froze on me, when i tried to start opera, it said it was clearing the memory or something. When i rebooted the phone, at first it refused to boot, froze at the pink circle.
now i got it to boot a couple of times, and HTC sense is mostly gone, i get to see an ugly Win M version... I cant get the phone to connect, so i can reinstall another firmware ... what can i do?
It's just a pretty expensive flashlight now.
GregoryGoris said:
i got this phone 1 day, and it's already dead
i installed hspl, and a custom wwe rom, it was working fine. But then it froze on me, when i tried to start opera, it said it was clearing the memory or something. When i rebooted the phone, at first it refused to boot, froze at the pink circle.
now i got it to boot a couple of times, and HTC sense is mostly gone, i get to see an ugly Win M version... I cant get the phone to connect, so i can reinstall another firmware ... what can i do?
It's just a pretty expensive flashlight now.
Click to expand...
Click to collapse
Try flashing it by SD card method
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I tried
and failed.
I uploaded the nbh from your signature to my freshly formatted Fat32 microsd card
the tricolore screen came up. It said something about reading, and some digits at the top (005 something), back to the tricolore screen.
and now its been like that for about an hour... (PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0X10 in the top red part
SERIAL in the white...
what can i do? There has to be a way...
plug in the usb whilst on the three colored screen. when serial becomes usb flash your rom from usb.
samsamuel said:
plug in the usb whilst on the three colored screen. when serial becomes usb flash your rom from usb.
Click to expand...
Click to collapse
wow, i feel like a fool for not thinking about this
thanks a lot, works like a charm again!
no worries.
when you look in bootloader, if it says spl x.x.hspl then you can flash anything from usb. if it said x.x.0000 then it would only accept roms specific to your model/region/provider.
its worth remembering you can flash hspl from the bootloader screen too.
oh and when it was sticking at the pink circle,,,,,, almost certainly because you hadn't flashed a compatible radio.
if it happens again go into bootloader and flash the radio, just like flashing a rom.
i think giving your hd2 a hard reset will make it work again.
I did exactly the same thing. Have flashed ROMs before on other devices and foolishly plunged straight into to flashing my HD2 without reading the instructions carefully; i.e. check the battery level is >50%, ensure you have HardSPL'd and flash the correct radio version first.
I tried Energy ROM Build 21907 and had it working for a while until I powered off and then tried to switch on again and it froze with a pink circle showing. I had checked the radio version (2.04) but had not heeded the warning to use 2.07.50 or higher, avoid 2.xx.51 like the plague etc. Just plain hadn't followed instructions.
Doing a soft reset doesn't work.
Doing a hard reset doesn't work.
Hitting one's head against a wall does not work.
Following samsamuel's advice about plugging in after hard reset does work:
- Have your Windows PC ready but don't plug in the device yet
- Download CustomRUU.exe and the correct radio file
- Rename the radio file to RUU_signed.nbh
- Hold the device's Vol Down and Power keys, let em go and do a hard reset
- You'll see the tricolour screen and you should see HSPL near the top and "Serial" at the bottom
- Plug in the USB cable and "Serial" changes to "USB"
- Run CustomRUU on your PC and follow the instructions
Thank you very much, samsmuael, for rescuing me on this occasion.
I had a frightnening experience in the same vein today also.....
Decided to go for my first flash........which turned into 3...
Anyway I flashed an energy rom...........
Then a cleanex which left me unable to connect via activesync........
Had a quick panic.........got on here for some answers and found something about flashing via cable from bootloader.......... Panic over
Flashed to another energy rom.......... all is well again......
Only problem is what to flash next........
Hey guys, Im not new to this flashing thing so Im ata complete loss as to what Im doing wrong.
Im running magldr v1.13 w/ CWM and a MyTouch 4G installed. I need to go back to Tmo WM6.5 so I can return the phone under warranty. I have read the guides over and over and I have no idea what Im doing wrong.
I have tried 3 separate computers XP, Vista, and Win7 and 2 cables, however when on the bootloader screen I never get the "USB" at the bottom when plugged in. I can select USB flasher and it connects to the computer, same with USB MassStg.
I really appreciate any advise here....
just flash via sd card.
from mskip's guide:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
worked, thank you!
Can someone point me to where I can find the stock rom for my USA T-mobile HD2? (link maybe??) I have been unable to find where to download it.
I also tried going to HTC.com and I couldn't find it there either.
What happened was that I had the Android 2.2 nand on it and now the touch screen has stopped working. The physical buttons work fine. I tried to reinstall android but it failed and now it won't boot into android. I would like to bring it back to factory Windows Mobile and if the touch screen still does not respond, then see if I can take it back to T-mobile.
jimvsmij said:
Can someone point me to where I can find the stock rom for my USA T-mobile HD2? (link maybe??) I have been unable to find where to download it.
I also tried going to HTC.com and I couldn't find it there either.
What happened was that I had the Android 2.2 nand on it and now the touch screen has stopped working. The physical buttons work fine. I tried to reinstall android but it failed and now it won't boot into android. I would like to bring it back to factory Windows Mobile and if the touch screen still does not respond, then see if I can take it back to T-mobile.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=577717
And how to return phone to stock..
http://www.youtube.com/watch?v=vPeuNLzqnJg
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks
flash hspl ... radio ... then mag ... then try the downgrade to winmo
rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?
No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck
Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next
task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!
GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......
know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?
anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks
Depends how old it is. It may need to go directly to HTC to get it fixed.
I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...