Related
I rooted my phone and have Clockworkmod Recovery to flash roms. I flashed cyanogenmod 6.1 the stable release but after I finish it just shows the mytouch boot screen and reboots. I already try wiping it and flashing it again. But no luck Any help please?
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
Try flashing a 2708+ kernel. There are lots of them, you can find one on cyanogen's site or on xda (search kernel corner) or you could google "pershoot 2708".
Positive Solutions upstairs
Thanks it worked
However I still have a question whats the difference between HBOOT-1.33.0013 and HBOOT-1.33.0013d?
Ummmm...I don't know. But I think HBOOT-1.33.0013d is Rooted....
Hintay said:
Ummmm...I don't know. But I think HBOOT-1.33.0013d is Rooted....
Click to expand...
Click to collapse
No, foot's completely different from the SPL. There are a few features unlocked in the 1.33.0013d SPL that are not usually available with the stock 1.33.0013 SPL.
Sent from my HTC Glacier using Tapatalk
DonJuan692006 said:
No, foot's completely different from the SPL. There are a few features unlocked in the 1.33.0013d SPL that are not usually available with the stock 1.33.0013 SPL.
Sent from my HTC Glacier using Tapatalk
Click to expand...
Click to collapse
Oh.....I google it and I think you are right!!
Same Here
I'm having the same problem. I'm trying 6.0 to see if it works instead. Not sure what the issue is, but I'll let you know if I can find out.
I have the same rebooting problem. I'll try your suggestion. Hope it'll work
Hi all first post Cant seem to find the answer after searching around on other post.
I was running CM 6.1 Fine. They droped HTC Magic so I wanted to try Ginger yoshi 1.0 RC7.1
I installed rom then updated radio. The phone my be boot-looping I don't. I have re flashed it several times. One time it got stuck on HTC screen other time it got stuck on splash screen one other time it was black with back light still on.
32a
Hboot 1.33.0013
CPLD-13
Radio-2.22.23.01
Thanks so much for takeing the time to read my post I guess I will try 7.0 see if that works I think its the radio
Same thing with 6.x It looks like I need to upgrade my radio to 3.x I guess I will try in the morning. The Ginger yoshi splash screen is as far as I can get it freezes up after about 30 secs on that
From my under standing the 3.* radios were for rodgers (canada) so if you in us I don't think that will fix. You might just wipe and nandroid your previous and see if that works. I had I hard time installing yoshi the first time cause of I think sd card issues the stock sd card sucks being class 2. If you get cm 6.1 working from nandroid restore you might try to run yoshi rom from rom manager that's only way I could get it to install. And first boot with yoshi does take forever.
Sent from my HTC Dream using XDA Premium App
Yes, I believe you will need to change your radio to a 3.22 radio and you will also need an SPL 1.33.2009 or 1.33.2010 since you have the 32a board. Don't forget to flash the 32a kernel. It's also in Yoshi's Mediafire folder.
I think (could be wrong, confirmation anyone?) I remember reading somewhere that the 2.22 radios we're specific and that you might run into problems flashing other radios. (no, seriously. Wrong radios could very well brick your magic) Tread carefully, my friend.
Also, I ran into problems with both the 7.1 and the 7.1.1 RC. Wifi didn't work for both roms so I wen't back to RC 7.
Don't flash any radio yet! Do you have a headphone jack on your phone? If you do then flashing the 3.xx radio is a bad idea!
Sent from my shad0w on Sapphire using XDA Premium App
Well i restored to cm 6.1
Used rommanager to install 7.1.1 Wiped then rebooted into nana and used 32a kernel.zip I all so run boot-cm_2635.11_ds_32a-oc-uv-xtra-ram-fp-020711
If I dont run the 32a kernel.zip it will bootloop on htc my touch 3g screen.
I run 32a kernel.zip located in Yoshi's Mediafire folder and it locks up on ginger yoshi splash screen
Same way with 7.1 and 6.5 any suggestions I do have 3.5 jack but I dont have the fender
Since I re flashed I will include all stuff from fast boot.
Sapphire PTV 32a
Hboot 1.33.0013 (sapp31000)
Cpld-13
radio 2.22.23.02
I guess Hboot is SPL? I used this for SPL boot-cm_2635.11_ds_32a-oc-uv-xtra-ram-fp-020711.zip I dont know if that was right or not. THanks much.
I was reading 7.1.1 is a wifi fix but from the post above your stateing its still broken is that right?
I updated to 1.33.2010 then tryed to install rc7.1.1 stuck on mytouch 3g screen
Tryed to use nana backup to cm 6.1 black screen with back light on so Im at a loss I guess I download cm 6.1 rom and try that or downgrade spl
Sorry dumb question
Sent from my HTC Dream using XDA Premium App
If you can get back to the other spl and can boot I might have your fix
Sent from my HTC Dream using XDA Premium App
So Do I just do a diffrent spl then install new rom?
Wrong my bad
Sent from my HTC Dream using XDA Premium App
My fault I was able to restore cm 6.1 with that new spl it took out the splash screen so I have cm 6.1 with new spl
jbourn27 said:
http://www.mediafire.com/?77aeakoaji5sb8a
Do everything like the first time and try this kernal see if you can get it to work with it
Sent from my HTC Dream using XDA Premium App
Click to expand...
Click to collapse
reflashing rc7.1.1 with this kernal I will let you know soon thanks for all the help
I will use rommanager and wipe
Cancel last message
Sent from my HTC Dream using XDA Premium App
stuck on htc screen
I loaded 7.1.1 then rebooted into nana and installed new kernel still no luck
32a
hboot 1.33.210
CPLD 13
radio 2.22.23.02
THanks much
im going to let it run for a hour likely nothing will happen then just go back to cm 6.1 I guess any other roms I should try?
I lied about kernel give me email ill send right one
Sent from my HTC Dream using XDA Premium App
raven.warsong said:
stuck on htc screen
I loaded 7.1.1 then rebooted into nana and installed new kernel still no luck
32a
hboot 1.33.210
CPLD 13
radio 2.22.23.02
THanks much
im going to let it run for a hour likely nothing will happen then just go back to cm 6.1 I guess any other roms I should try?
Click to expand...
Click to collapse
If you have the mytouch 3g 1.2 (the one with the headphone jack) then you need a 32b kernel without the 2708 ramhack. And you should have the 1.33.0013 spl and a 2.xx radio. On the yoshi thread I think they have a link to a kernel for us.
And I would suggest using ezgingerbread or cos-ds instead. Ezginger is fast and light. Cos has cm stuff
Sent from my shad0w on Sapphire using XDA Premium App
I think there may be issues with the 7.1(shame as 7 is blinding), so I'm sticking with the excellent rc7 for the moment(severe case of if it ain't broke don't fix it!). I had the right radio etc and still got the half hour non boot, then fc after wizard set up, then blank screen.
As with the rest of ginger yoshi's, 2.22.27.08 or 2.22.28.05 radio and the 1.33.0013 or 1.33.0013d spl are mandatory for them to work.
Having the same problem on rc 7.1 && 7.1.1
Except I'm on a 32b SPL 1.33.0013d and I've tried both 27.08 and 28.25 S
Still stuck on Green Splash >______<"
Here is te the deal I have an htc magic model A6161. It is a 32a magic and it is an htc branded phone. I rooted my device successfully and installed a custom rom on it. Everything worked fine until I flashed the 6.35.10.18 radio. Now my device can only boot on fastboot mode and bootloader, and when try to turn it on normally it just shows the htc logo for a few seconds and then reboot itself doing the same
I just wanted to know if there is a way for me to get my phone working Again. Here is the info of my phone :
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-6.35.10.18
may 8 2009 21:02:32
Everything besides from the radio remains unchanged. I woud appreciate any help. And sorry for my bad english if I expressed myself the wrong way.
Sent from my Yoshi Mod MM1 on 32b using XDA App
gabriel.castro said:
Here is te the deal I have an htc magic model A6161. It is a 32a magic and it is an htc branded phone. I rooted my device successfully and installed a custom rom on it. Everything worked fine until I flashed the 6.35.10.18 radio. Now my device can only boot on fastboot mode and bootloader, and when try to turn it on normally it just shows the htc logo for a few seconds and then reboot itself doing the same
I just wanted to know if there is a way for me to get my phone working Again. Here is the info of my phone :
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-6.35.10.18
may 8 2009 21:02:32
Everything besides from the radio remains unchanged. I woud appreciate any help. And sorry for my bad english if I expressed myself the wrong way.
Sent from my Yoshi Mod MM1 on 32b using XDA App
Click to expand...
Click to collapse
if i am correct (which i may not be cuz i dont know much about 32a phones) then i think you have to flash an spl that goes with the 6.xx radios.
Yes I thought that as well but the thing is that I can't flash anything with in recovery because when boot my phone in recovery mode it reboots itself before a can do something. I tried to flash with fastboot but I could'nt ether because my magic is SHIP S-ON H and I need it to be S-OFF H to do that. Just in case I know that the "S" means security. Do you know how can get it be S-OFF instead of S-ON. If I can do that then I think I will be able to fix my phone. If not any other helpful info is welcomed.
Sent from my Yoshi Mod MM1 on 32b using XDA App
gabriel.castro said:
Yes I thought that as well but the thing is that I can't flash anything with in recovery because when boot my phone in recovery mode it reboots itself before a can do something. I tried to flash with fastboot but I could'nt ether because my magic is SHIP S-ON H and I need it to be S-OFF H to do that. Just in case I know that the "S" means security. Do you know how can get it be S-OFF instead of S-ON. If I can do that then I think I will be able to fix my phone. If not any other helpful info is welcomed.
Sent from my Yoshi Mod MM1 on 32b using XDA App
Click to expand...
Click to collapse
Make a goldcard would be step one.
Sent from my fingers.
I read that a 2gb sd card is needed for that. Is it true or I can do it with a 1gb sd as well?, because I used to have a 2gb sdcard but Is lost and I would have to buy a new one.
Sent from my Yoshi Mod MM1 on 32b using XDA App
gabriel.castro said:
I read that a 2gb sd card is needed for that. Is it true or I can do it with a 1gb sd as well?, because I used to have a 2gb sdcard but Is lost and I would have to buy a new one.
Sent from my Yoshi Mod MM1 on 32b using XDA App
Click to expand...
Click to collapse
1 Gb is fine. Hell a 256 MB would work.
Sent from my fingers.
Ok i'll do it and let's see what happens. I'll be back when i'm done making the gold card. Probably tomorrow. Thanks for the help.
Sent from my Yoshi Mod MM1 on 32b using XDA App
Ok. now i made the goldcard. What woud be the next step?
Sent from my Yoshi Mod MM1 on 32b using XDA App
gabriel.castro said:
Ok. now i made the goldcard. What woud be the next step?
Sent from my Yoshi Mod MM1 on 32b using XDA App
Click to expand...
Click to collapse
Run the following command from fastboot..."fastboot getvar version-main" and post the output here.
Sent from my fingers.
It says " version-main: 2.52.707.2". what is next please?
Sent from my Yoshi Mod MM1 on 32b using XDA App
Hello, all. I'm sorry I write in this threat, but I have exactly same problem. I got the SPL to 1.33.2009 S-OFF from 1.33.0009 S-ON and when I tried to update the radio to 6.35 ( via the Radioswitcher tool )- it was successful, but can't boot. Nore fastboot or RadioSwitcher does the work ( phone goes into black screen ).
Wish you luck with our issue.
edit: I managed to flash the old image but now it's stuck on the "HTC MAGIC" logo, and still won't boot.
edit2: Got everything back, like before, but still can't boot. Have to mention that, when updated, I used the top options from the RS GUI, "Flash bundled Radio, SPL& Recovery" with checked "Erase system+userdata+cache" - is this, what I've done wrong ? If I understand correctly, a custom rom flash would fix the problem, because I've deleted the system, right ?
Thank's for your time.
Sorry grundio I whish I could help you but I do not have experience with 32a magics at all.but maybe the guy how is helping me can give you a hand as well. Let's wait for him to reply. Otherwise if you need some help with 32b devices I might be helpful.
Sent from my Yoshi Mod MM1 on 32b using XDA App
Thank you, @gabriel.castro. Wish you luck .
Well, if we can go into fastboot- there is always hope. I think I accidently deleted my rom and flash would fix it, but I am hoping for a confirmation, to be sure.
I have a 32A. I'd say follow the instructions here:
http://wiki.cyanogenmod.com/index.php?title=HTC_Magic_(32A):_Rooting_(6.35.x_radio)
And once you get a working ROM booted up (Yoshi's, CM, etc), take it slow on upgrading again. Also, I don't personally trust apps like that, just do it the commandline way and it'll just work. Dunno, I just trust commands more xD.
sorry if i'm mistaken but i think that in order to this procedure to succeed my phone most be able to boot normally first. and that is my problem. i can't get it to boot normally. but thanks for your time anyway
Run the following command from fastboot..."fastboot getvar version-main" and post the output here.
The output is: "version-main: 2.52.707.2"
what is next?
Sent from my T-Mobile myTouch 3G using XDA App
Ia there something i can do? Please help me.
Sent from my T-Mobile myTouch 3G using XDA App
I think I can correct these issue using JTAG. Pm me if you are interested...
I think this has no way to be fixed after all. Thanks for everything guys
Sent from my Sapphire/dream using XDA App
when it boots it shows the logo for a few seconds and reboots then. i dont know if this a brick. but can i fix it? or can i frow it away? :O
levibuko said:
when it boots it shows the logo for a few seconds and reboots then. i dont know if this a brick. but can i fix it? or can i frow it away? :O
Click to expand...
Click to collapse
haha no your not bricked your just in a bootloop.. means you tried flashing a rom or something and you didnt have correct settings ex.. radio, hboot, kernel, rom... can you power on into a recovery mode? holding home+power untill the G1 logo appears (when phone is powered off) and tell me what kind of screen appears?
yes u can
Sent from my Desire HD using XDA Premium App
levibuko said:
yes u can
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
huh? what happens when you power on your phone using home+power??
the clockworkrecovery starts^^
edit:
i tried to flash this rom (1.6):
http://forum.xda-developers.com/showthread.php?t=538456
but its the same
fastboot says:
Dream PVT 32b SHIP S-ON
HBOOT-1.33.0013d (DREA11000)
DPLD-4
RADIO-2.22.27.08
Oct 21 2009, 22:33:27
levibuko said:
the clockworkrecovery starts^^
edit:
i tried to flash this rom (1.6):
http://forum.xda-developers.com/showthread.php?t=538456
but its the same
fastboot says:
Dream PVT 32b SHIP S-ON
HBOOT-1.33.0013d (DREA11000)
DPLD-4
RADIO-2.22.27.08
Oct 21 2009, 22:33:27
Click to expand...
Click to collapse
oOo ok so yeah your fine your phone is not bricked!! all you need to do is a lil resaearch, first turn your phone back off... than power back on holding camera+power! than you should see a screen with lil android guys skateboarding lol and you need to read the information like wat radio you have and what hboot you have?
Dream PVT 32b SHIP S-ON
HBOOT-1.33.0013d (DREA11000)
DPLD-4
RADIO-2.22.27.08
Oct 21 2009, 22:33:27
ive posted in post nr 5^^
levibuko said:
Dream PVT 32b SHIP S-ON
HBOOT-1.33.0013d (DREA11000)
DPLD-4
RADIO-2.22.27.08
Oct 21 2009, 22:33:27
ive posted in post nr 5^^
Click to expand...
Click to collapse
it looks like you need to flash a kernel with that rom for the 2708 radio... i never used this rom so im not sure but try flashinh the 2708 kernel right after flashing the rom, do not wipe or reboot in-between
the kernel is on the post with the rom! just look for 2708
ill try it when im at home thank you!
can you advice me a good rom you had tried?
Sent from my Desire HD using XDA Premium App
i tried it, nothing changed
Sent from my Desire HD using XDA Premium App
when i press camera and power it says again dream pvt etc
levibuko said:
i tried it, nothing changed
Sent from my Desire HD using XDA Premium App
when i press camera and power it says again dream pvt etc
Click to expand...
Click to collapse
only other thing i could think of would be to change your recovery, try amon RA, or just try to flash a diff rom... there's better ones out there
If u flash the rom then flash the 2708 kernel then boot up it should be fine. U could always try froyo by laszlo to see if it will boot for u
sent from my transparent xda app by the impaler747
levibuko said:
i tried it, nothing changed
Sent from my Desire HD using XDA Premium App
when i press camera and power it says again dream pvt etc
Click to expand...
Click to collapse
o damm im not sure man.. can you flash any other roms? maybe this one is just not meant for you lol
ive found another way. downloaded the rc 9 dreaimg. nbh on the root od the sdcard and startet the g1 wirhbpressing power and camera button. ibconfirmed and it worked.
thx for your held
Sent from my Desire HD using XDA Premium App
if you wanna use that rom, reroot, install hardspl, then upgrade to 1.33.2003 spl. From there install the 14mb radio+spl combination and flash the rom + 2708 kernel + custom mtd mapped like death spl
Hi .... I am trying to Root my wife's T-Mobile My Touch 3G.....and what a PAIN it is........
The Super One Click method ... says the Device is Already Rooted.........I have the Pirate Android Super User Installed on the Phone......but just cant Install the Custom Recovery or Anything Else !!!!!!!
I downloaded the Rom Manager from Market and tried Installing the CW Recovery....and it says Super User not Found !!!!
I tried Installing Titanium Backup....it says the Device is not Rooted !!!!!!
its become more of a PAINFUL CHALLENGE !!!!
Any advise or suggestion ??? Anything is welcome to Help me out of the mess !!!!
(wish rooting this damn phone was as easy as rooting my DHD )
the Specs are:
T-Mobile My Touch 3G
Sapphire PVT 32B Ship S-ON G
HBOOT- 1.33.0013 (SAPP 3000)
CPLD 10
Radio 2.22.28.25
Oct 21.2009 22:33:27
thanks
Install the app super user and try again. For rooting maybe try universal androot.
matzehtc said:
Install the app super user and try again. For rooting maybe try universal androot.
Click to expand...
Click to collapse
TRIED.......reinstalling SU......even upgraded it from market......
tried Universal Androot.....NAH.......
its become a pain...
I remem I had this issue as well try making it mount the memory card while u are doing onclick root method.you should see at the end of the procesd a promt to donate if u don't see that you and I had the same issue try re downloading program and mem mounted and not mounted...
Sent from my Sapphire/Dream using xda app-developers app
Honestly I just tried till it worked
Sent from my Sapphire/Dream using xda app-developers app
indtram said:
Hi .... I am trying to Root my wife's T-Mobile My Touch 3G.....and what a PAIN it is........
The Super One Click method ... says the Device is Already Rooted.........I have the Pirate Android Super User Installed on the Phone......but just cant Install the Custom Recovery or Anything Else !!!!!!!
I downloaded the Rom Manager from Market and tried Installing the CW Recovery....and it says Super User not Found !!!!
I tried Installing Titanium Backup....it says the Device is not Rooted !!!!!!
its become more of a PAINFUL CHALLENGE !!!!
Any advise or suggestion ??? Anything is welcome to Help me out of the mess !!!!
(wish rooting this damn phone was as easy as rooting my DHD )
the Specs are:
T-Mobile My Touch 3G
Sapphire PVT 32B Ship S-ON G
HBOOT- 1.33.0013 (SAPP 3000)
CPLD 10
Radio 2.22.28.25
Oct 21.2009 22:33:27
thanks
Click to expand...
Click to collapse
Hi, this is because you have to install su.zip from the recovery. Did you change original recovey?
You need install fastboot & adb drivers on your pc, the best tutorial you can found in wiki or google putting recovery mytouch. You need to know if our mytouch is 32A or 32B this is very important...