Database Users

[q] htc sync

The 22nd of august Kernel version from oe.netripper.com says:
Date: Sun Aug 22 19:45:09 2010 +0200
htcleo: add usb notification
Now the sense USB dialog is comming very fast.
USB Disk is working, Connection to HTCSync too.
The sync of bookmarks isn't working correctly, maybe a userspace problem
For other tests a outlook pc is needed
I installed it with attached ko files and work fine, except i cannot make "HTC Sync v2.0.40" to discover my HD2 running Darkstone 2.1.
HTC Sync does not see the HD2. ADB driver is installed, activating debugging in HD2 or not makes no difference.
I tried a "HTC Sync" 2.0.3, with same symptom.
I would like to try HTC Sync v3.0 but a serial for Nexus One is requested to download it.
If someone could supply a Serial for Nexus one, it would be nice or upload v3.0, thanks in advance.
Can some one explain which HTC Sync is necessary for our HD2?

http://www.megaupload.com/?d=YZRRRBDD
Sent from my HTC HD2 using XDA App

Try v3.0.5387
fi3ry_icy said:
http://www.megaupload.com/?d=YZRRRBDD
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thank you, in the meantime i found a 3.0.5387 here:
http://www.mediafire.com/?b822b6dpjdisjns
Tried it but same result, HTC Sync install well with driver, but will not recognise the HD2?
Any idea?

emottier said:
Thank you, in the meantime i found a 3.0.5387 here:
http://www.mediafire.com/?b822b6dpjdisjns
Tried it but same result, HTC Sync install well with driver, but will not recognise the HD2?
Any idea?
Click to expand...
Click to collapse
its opening popup asking type of connection?
could not work with some builds I think... works with mattc 1.5 and 1.5b... but wifi need to be fixed

Thanks for the software. My device is recognised via HTC Sync, using mattc 1.5b, I can now sync my calendar but when I try to sync my contacts I get an error message that my device does not have enough free memory ... Any suggestions?

sorry, can't help u guys.. i migrated my contacts to gmail so my contacts and calendar syncs with gmail..

Did you install ADB ? you need this for it to work I think well its working fine here. On XP I went to control panel hardware device manager found ADB and updated driver pointing to location of files.
Edit : OK I see ADB installed already

caedanne said:
its opening popup asking type of connection?
could not work with some builds I think... works with mattc 1.5 and 1.5b... but wifi need to be fixed
Click to expand...
Click to collapse
Where does it ask for connection?
On the PC or on the HD2?
When i connect the USB cable HD2 ask to activate the USB device, answering activate or not, does not improve.
And on HD2 shall we enable USB Connection, USB debugging or both?
Thank for help.

LondonTownGuy said:
Did you install ADB ? you need this for it to work I think well its working fine here. On XP I went to control panel hardware device manager found ADB and updated driver pointing to location of files.
Click to expand...
Click to collapse
When i install HTC Sync v2... or v3... it also install ADB driver in my "Windows 7 X86" without error.
May be a specific driver is necessary for W7 ?
Where did you find yours?
Thx

Sense!!!
It looks to work with mattc 1.5 and 1.5b, which are Sense version.
I use Darkstone v2.1 which is sense less.
Can it be the reason why it does not work for me??

emottier said:
When i install HTC Sync v2... or v3... it also install ADB driver in my "Windows 7 X86" without error.
May be a specific driver is necessary for W7 ?
Where did you find yours?
Thx
Click to expand...
Click to collapse
It was posted in the thread by thattruth132 here, http://forum.xda-developers.com/showthread.php?t=748896&highlight=adb but its for xp, there is a link to android developers site in that thread there is a adb file in the pack which might help, but it sound like you have the correct driver already.

HTC Sync 3.0.5422
Try with this brend new version dated 23.8.2010, but same pb, HD2 is not seen.
Also try this:
http://forum.xda-developers.com/showthread.php?t=756513
new version r6, no success.
It does not work, HD2 is not recognised by HTC Sync.
I wonder if some of you achieve to make it working with a Sense-less version?

emottier said:
Try with this brend new version dated 23.8.2010, but same pb, HD2 is not seen.
Also try this:
http://forum.xda-developers.com/showthread.php?t=756513
new version r6, no success.
It does not work, HD2 is not recognised by HTC Sync.
I wonder if some of you achieve to make it working with a Sense-less version?
Click to expand...
Click to collapse
From where did you get the new version? From the official site you need a serial number and I don't have one ...

emottier said:
It looks to work with mattc 1.5 and 1.5b, which are Sense version.
I use Darkstone v2.1 which is sense less.
Can it be the reason why it does not work for me??
Click to expand...
Click to collapse
It seems from HTC's website that there is an htc sync software on the phone. So I think your guess is right. Maybe it is like Activsync where part of it is on the device and another on the PC.
Also, when HTC sync 3.0 was released, it was for Wildfire only and the new version supports more devices. Maybe if the rom is based on one of these devices without much modification, it would still be recognized.

use this and the latest GIT kernel. HTC sync will work on sense Rom
http 94.136.51.200 download / Driver / HTC%20Wildfire%5Csetup_3.0.5422.exe

khiann said:
use this and the latest GIT kernel. HTC sync will work on sense Rom
http 94.136.51.200 download / Driver / HTC%20Wildfire%5Csetup_3.0.5422.exe
Click to expand...
Click to collapse
Thanks for the link.

i think htc sync will work only in ROM with Sense UI, not working in Cyanogen mod.

adioph said:
i think htc sync will work only in ROM with Sense UI, not working in Cyanogen mod.
Click to expand...
Click to collapse
This was also my guess, you are right. I tried the mattc 1.6 with HTC Sync 3.0.5422 and it works like a charm. This mattc 1.6 is a Sense version which confirm our guess. As one of you said, may be a software is necessary in the non-sense version, the pb is, which one?
If some one has an idea?

[Q] Galaxy 3 - Win7 x64 - no ADB connect

Hi all,
I'm using HTC HD2 running NAND Android. I tried many builds, and even I can compile "my clone" of released build before flashing. I use ADB and Droid Explorer fluently.
So ... now my friend come with Galaxy 3. I want to help him with few issues. First I wanna to look inside, if I can see any problems. But ... I'm NOT able to have ADB connect.
The comp is Win 7 machine 64bit. With HD2 works well. With Samsung we tried several driver versions. I can have valid Samsung devices in Device manager, but ADB does not connect.
Is here, or there any guide, how to make it communicate?
thanks
PS. I tried the "search", but either the answer is not here, or I'm blind

jaba_cz said:
Hi all,
I'm using HTC HD2 running NAND Android. I tried many builds, and even I can compile "my clone" of released build before flashing. I use ADB and Droid Explorer fluently.
So ... now my friend come with Galaxy 3. I want to help him with few issues. First I wanna to look inside, if I can see any problems. But ... I'm NOT able to have ADB connect.
The comp is Win 7 machine 64bit. With HD2 works well. With Samsung we tried several driver versions. I can have valid Samsung devices in Device manager, but ADB does not connect.
Is here, or there any guide, how to make it communicate?
thanks
PS. I tried the "search", but either the answer is not here, or I'm blind
Click to expand...
Click to collapse
Kind Of A Stupid Question, But Have You Enabled USB Debugging mode?

Yes stupid ))))
Of course I have the debug active.
Sent from my HTC HD2 using XDA App

jaba_cz said:
Yes stupid ))))
Of course I have the debug active.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Re-install the drivers then.

Which version? Can you recommend working version source?
Sent from my HTC HD2 using XDA App

jaba_cz said:
Which version? Can you recommend working version source?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
I just installed kies for my drivers. Try it.

A few questions about Custom rom's.

I know this is the wrong section but I got some kind of feeling that there are more people looking in this section.
I have read some guides in the Development section (http://forum.xda-developers.com/showthread.php?t=857537'
But I got some questions about rooting/S-off.
Why is rooting/S-off necessarily, why can't I just put the rom on my SD and go right into recovery mode and boot it up from there?
Also the program visionary plus, I hate that thing so much.... At this step:
Open Visionary and tap temproot, then attempt permroot now. Your device will reboot.
How the hell do I open it? I use Astro File manager or something to go to the file but I can't install the program on my mobile/SD card >.<
Also what do I need to do more besides Wiping my phone? In this guide: http://forum.xda-developers.com/showthread.php?p=11557769
It says to flash a Radio is this a must? Or is the S-off/Root enough.
Thanks already

mesut19 said:
But I got some questions about rooting/S-off.
Why is rooting/S-off necessarily, why can't I just put the rom on my SD and go right into recovery mode and boot it up from there?
Click to expand...
Click to collapse
No, the DHD has a protected system which precludes overwriting the system partition so without S-OFF you can not make any permanent changes.
mesut19 said:
Also the program visionary plus, I hate that thing so much....
Click to expand...
Click to collapse
Don't use it then the instructions here, achieve root without the use of visionary.
mesut19 said:
Also what do I need to do more besides Wiping my phone? In this guide: http://forum.xda-developers.com/showthread.php?p=11557769
It says to flash a Radio is this a must? Or is the S-off/Root enough.
Click to expand...
Click to collapse
No, but using a newer radio may improve battery life and wifi/Gps reception etc.
mesut19 said:
Thanks already
Click to expand...
Click to collapse
No worries!

When I had the wrong Radio my battery drain was 15% an hour and this was with a sense Rom. imo S-OFF is a must.

i used this and it worked great.
http://forum.xda-developers.com/showthread.php?t=961406
i'm using cm7 with android phone 7 theme and i like it.
I heard android revolution is good too but its not running android 2.3, cm7 is.

thddragon85 said:
i used this and it worked great.
http://forum.xda-developers.com/showthread.php?t=961406
i'm using cm7 with android phone 7 theme and i like it.
I heard android revolution is good too but its not running android 2.3, cm7 is.
Click to expand...
Click to collapse
Actually all of the roms now are running Gingerbread, and sense roms are on sense2.1 (With some sense3.0 elements).

My bad, when I was choosing which rom to load yesterday, everything i read said AR was still 2.2. Must have been old threads.

Thanks guys I now know enough
<3

mesut19 said:
but I can't install the program on my mobile/SD card
Click to expand...
Click to collapse
just for the record, nobody can help you based on this information. you need to quote the error message.

Haven't tried CM7 but if you haven't already flashed a rom I'd give a big thumbsup for Leedroids GB rom, very quick, stable and flashed like a dream

Alistair25 said:
Haven't tried CM7 but if you haven't already flashed a rom I'd give a big thumbsup for Leedroids GB rom, very quick, stable and flashed like a dream
Click to expand...
Click to collapse
+1 for this. definitely give LeeDroid a go if you can. admittedly, it's the only custom one i've used to date (and for less than 24 hours at that), but i can't rate it high enough compared to the branded rom i got in the first place. amazing!

kendong2 said:
just for the record, nobody can help you based on this information. you need to quote the error message.
Click to expand...
Click to collapse
There is no error message. I just can't find a 'exe' or AKP file which will install the program on my SD/Mobile.
@ Above,
No, I haven't flashed a ROM yet since I heard there are some problems with ClockWorkmod of ROM Manager so I am going to wait for a few days xD

mesut19 said:
There is no error message. I just can't find a 'exe' or AKP file which will install the program on my SD/Mobile.
@ Above,
No, I haven't flashed a ROM yet since I heard there are some problems with ClockWorkmod of ROM Manager so I am going to wait for a few days xD
Click to expand...
Click to collapse
sorry to hear that. it's news to me, though. i downloaded it (CWM), and used it last night in the process of flashing the rom, no issues. but i understand the whole 'there may be issues, so i think i'll wait - don't want to brick my phone' line of thought. good luck when you get there. i'm sure you'll be fine if you follow the various guides posted on here. they worked an absolute treat for me (and i'm the definition of n00b).

krill78 said:
sorry to hear that. it's news to me, though. i downloaded it (CWM), and used it last night in the process of flashing the rom, no issues. but i understand the whole 'there may be issues, so i think i'll wait - don't want to brick my phone' line of thought. good luck when you get there. i'm sure you'll be fine if you follow the various guides posted on here. they worked an absolute treat for me (and i'm the definition of n00b).
Click to expand...
Click to collapse
RCmix HD is saying about the same that the wiping isn't working or something.
One last question is there a way to backup you're app's?(Free app's XD) And I am using app's like Pingchat and Whatsapp will I lose the contacts in there?

mesut19 said:
RCmix HD is saying about the same that the wiping isn't working or something.
One last question is there a way to backup you're app's?(Free app's XD) And I am using app's like Pingchat and Whatsapp will I lose the contacts in there?
Click to expand...
Click to collapse
Titanium backup for backup & restore apps.
Ps: RCMix roxxxx, and seems to be very close from an update brings full sens 3.0
Sent from my Desire HD using XDA App

jayge_ said:
Titanium backup for backup & restore apps.
Ps: RCMix roxxxx, and seems to be very close from an update brings full sens 3.0
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
So basically I'm screwed? Since I need to downgrade to root, and to backup you need to have root >.< but when you downgrade you lose everything xD
I will try it tonight ._.

If you want to back up the new GB OTA ROM then yes but if you just want to back up your apps then No, you don't need root.
Titanium works with root but doesn't need it. Also, if you ticked to let Google keep a backup then your apps will be re-downloaded when you next perform a wipe.

thddragon85 said:
i used this and it worked great.
http://forum.xda-developers.com/showthread.php?t=961406
i'm using cm7 with android phone 7 theme and i like it.
I heard android revolution is good too but its not running android 2.3, cm7 is.
Click to expand...
Click to collapse
Android Revolution 5.1.x running Android 2.3.3 with stock look...
Sent from my Desire HD

Screw this I can't even manage to downgrade my mobile because the CMD commands don't find my device nor can I normally install the adb drivers.

mesut19 said:
Screw this I can't even manage to downgrade my mobile because the CMD commands don't find my device nor can I normally install the adb drivers.
Click to expand...
Click to collapse
Using Windoze is great....
One word for you: Linux.
At the risk of high jacking this thread, have you installed HTC Sync? Can you connect to HTC Sync? If not, try another USB port (if using front port use back ports or vice-versa). If none work uninstall HTC Sync and reinstall it after rebooting PC.
If that works when you are in adb (making sure USB Debugging is on) try
Code:
adb devices
Do you get a result?

Mr_JMM said:
Using Windoze is great....
One word for you: Linux.
At the risk of high jacking this thread, have you installed HTC Sync? Can you connect to HTC Sync? If not, try another USB port (if using front port use back ports or vice-versa). If none work uninstall HTC Sync and reinstall it after rebooting PC.
If that works when you are in adb (making sure USB Debugging is on) try
Code:
adb devices
Do you get a result?
Click to expand...
Click to collapse
Omg I got a little bit scared seems it worked but now i got: C:/downgrade/adb shell
$
Instead of a #
Is this good or do I need to start again ?XD I am panicing lol I have been trying this for 2-3 hours now.
Edit: It says:
C:\downgrade>adb shell chmod 777 /data/local/tmp/psneuter
Unable to chmod data/local/tmp/psneuter

MANGO update

did someone test it on our HD2 with this procedure http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11 ? Works it or not ?
thanks.

It won't work since it still requires for you to install the beta over zune...

can't someone with a device it will work on do a dump of the rom post-install??

genesis123 said:
It won't work since it still requires for you to install the beta over zune...
Click to expand...
Click to collapse
What Beta to install over the Zune ?

Sorry man, you are not the first one asking this. There are several other threads about the mango-update for now, why open another one?
No its not working. How should it, did you ever update your hd2 with wp7 over zune? I guess not. We have to wait till dft or the legendary yuki build a rom that will be flashable via magldr. there is no other way!

you need to remember my friend that the HD2 is not ment to have WP7 on it at all.
The only reason we do have it is because of some test drivers that were made way back, these test drivers are not finished drivers which is why we have a dodgy touch screen / battery/ camera / flashl
anyhow, even if it were possible to install the update on the HD2 via zune you would very likely end up buggering up your device. All it takes is for MS to overwrite one of our special drivers and that would be it.
so in short, the only way we have of upgrading is to reflash when someone releases a HD2 compatible ROM, thats it, as of right now there is no other way.

Ok, thanks for explanation.
Sent from my Schubert using XDA Windows Phone 7 App

marek1 said:
did someone test it on our HD2 with this procedure http://windowsphonehacker.com/articles/get_the_mango_update_now._without_being_a_developer.-06-30-11 ? Works it or not ?
thanks.
Click to expand...
Click to collapse
Cannot complete the backup step

[Port| N | Sense] HTC U Ultra Port

Hello! I've ported the: wallpapers, sounds and Sense Companion to the HTC 10. Hope you like it!
Download: https://www.androidfilehost.com/?fid=457095661767151241

Would that also work on the m9?

drakeNas said:
Would that also work on the m9?
Click to expand...
Click to collapse
This is actually a port for the M9?. But it works with any Sense 7/8 device. Make sure that you are using a Sense ROM, not a CyanogenMod/Lineage/Vanilla ROM, because it will not work. Also make sure that you are running on Android 7.0.

Hi,
Is there also a way to go back?

rmw98 said:
Hi,
Is there also a way to go back?
Click to expand...
Click to collapse
reflash Rom or do a backup before flashing this.

DeeZZ_NuuZZ said:
reflash Rom or do a backup before flashing this.
Click to expand...
Click to collapse
Thanks!
Will do that!!

The HTC Sense Companion is quite discrete... ?

lparee said:
The HTC Sense Companion is quite discrete... ?
Click to expand...
Click to collapse
That's also a problem on the U Ultra, HTC needs to fix it. I've tried tweaking the build.prop file but it doesn't make any difference.

not working

Yeah I installed the companion when it was released as standalone but it doesn't do a while lot...Bit disappointed. I figured it was because it's not the phone it came out for but guess I'm not the only one. I'll try this and see if it different somehow.