Database Users

Stuck on HTC please help!!!

So I've tried to install android build. I had stock rom 3.14.479.2 and I've tried to install HD2Froyo_V3. I've followed the instruction and after running haret few lines of text showed and than nothing, htc display appeared and stayed that way until I've removed the battery. Then I've read that I have to flash a coked Rom in order to install build for android so I downgraded it to 1.48 so I can install HSPL (not sure that it was necessary). I've flashed Energy.Leo.21916.Sense2.5.Cookie.Nov.02 with Radio_2_12_50_02_2 and copied Android folder again, same result. After flashing between stock Rom and Energy.Leo.21916.Sense2.5.Cookie.Nov.02 million of times I'm out of options. The same problem I had with FroyoStone_Sense_V3.2 too. It seemed so easy when I saw it on youtube and I can not believe that I had so bad luck. What I've done wrong? What should I do?
Anyone help?

One word: wait!
the kernel usually creates a 1GB storage for android. This will need some minutes (can take up to 10 minutes on class 2)
Some words for ROMs. Nearly all ROMs will work (the 2.14 ROMs don't) as long as you have a new radio. use 2.10 or higher. some have robo voice problems when calling. if you experience robo try another Radio.
(you should post questions like that in android development discussion. this subforum is for development only)

The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.

Ultimaex is right. Creating a 1gb storage for android will take some time, be patient. I have a 2gb storage which took about 20 minutes from start to finish.
fyi, my setup is tmous stock rom 3.14 and tytung's NexusHD2-FRG83 Froyo 2.2.1 build.

Mr_Q said:
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Click to expand...
Click to collapse
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...

mila1909 said:
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
Click to expand...
Click to collapse
Ive had this happen to me when I was switching builds. I deleted everything on my sd card that was related to android. Usually, the folders that android makes on your sd card are all lowercase letters. The folders are start with a capital letter are Windows Mobile specific folders. So delete all those folders, dont forget to show hidden files just to make sure you get all the folders. Afterwards, with whatever build you plan on using, its probably best to re-download that build just to make sure no files were edited and copy them to your sd card.
Basically just start with a clean slate and you should be good to go.

i had the same problem just reformat ure memory card on ure htc hd2

I formated the sd every time I tried. It's not that

Same
I got the same problem I have tried everything waited more dan 20 minutes. Formatted 25 times. Iam searching all forums to find something

Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?

I use 2.15.50.14 now, bit tried with every radio over 2.8

fig_jam_uk said:
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
Click to expand...
Click to collapse
Iam now trieying what you said. I let u know about it.
I use radio 12.50

nope, again not working...I am desperate

mila1909 said:
nope, again not working...I am desperate
Click to expand...
Click to collapse
Same format didnt help, iam now gonna try other kernels.

well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now

mila1909 said:
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
Click to expand...
Click to collapse
I got energy rom 2 and hspl3 gonna try that android build i let you know if it works. try to use the zImage from mattcleofroyo with another build.

That build didnt work for me after jumping kernel my leds flashed an i got whit streak.

coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
That's normal at the first boot, he wrote it in his thread.. Was the same for my phone, just let it doin' his thing it will finish after about 10min.
And what I wanted to say, I think mattc 1.8 is one of the best Sense builds out there.. Works so damm' smooth. Old but gold

Yes I agree. I've tried several after this one and got back on mattc...There are few problems but I hope that will be fixed in other versions....

coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
You mean you got all kinds of distorted graphics all over the screen. Black and white stripes kind of thing? If so, that's because you probably replaced zImage but didn't replace initrd.gz. Regardless, if you leave it on the screwed up black/white screen, it should load within 10-15 min.

[Q] Booting

When I try to load a custom build of Android, it proceeds like it has already booted before, eg just a few lines of text, vs a bunch of text like the first time I booted Android (The stock desire build) Is this normal?

It depends of the build you are using. Most of them only show a few lines and then an Android logo til installation is done...

Screen turn into black
Hi,
first i copy the andorid to my SD Card. If i strat the "runapplication" @ the andriod folder, the system is booting but after 2 sec. the screen fades into black. After that there is no reaction.
Can help someone? Please
Im using a normal (OEM) HTC HD2 with only CHT.
Thanks!!

I'm having the same problem (using CoreDroid).
I've flashed my HD2 but I did run the CustomRUU.exe because I don't want to lose my pre-installed stuff.
When I try to run Android it won't go any further than the black screen saying "Jumping to Linux kernel.."

sbidy said:
Hi,
first i copy the andorid to my SD Card. If i strat the "runapplication" @ the andriod folder, the system is booting but after 2 sec. the screen fades into black. After that there is no reaction.
Can help someone? Please
Im using a normal (OEM) HTC HD2 with only CHT.
Thanks!!
Click to expand...
Click to collapse
If you used the tool in my sig you would've known that you must change your radio (read the guide in my sig to know how to change it)
sjoe538 said:
I'm having the same problem (using CoreDroid).
I've flashed my HD2 but I did run the CustomRUU.exe because I don't want to lose my pre-installed stuff.
When I try to run Android it won't go any further than the black screen saying "Jumping to Linux kernel.."
Click to expand...
Click to collapse
The same thing

kawazaki said:
If you used the tool in my sig you would've known that you must change your radio (read the guide in my sig to know how to change it)
The same thing
Click to expand...
Click to collapse
Thanks for your response.
Before running this update ROM it gives you the warning it will delete all your personal installed files/data. A friend of mine still had all his pre-installed applications and such, can you give me more information on this?

sjoe538 said:
Thanks for your response.
Before running this update ROM it gives you the warning it will delete all your personal installed files/data. A friend of mine still had all his pre-installed applications and such, can you give me more information on this?
Click to expand...
Click to collapse
If you flash just a radio then you will not lose anything on your device. If you flash a ROM (either on its own or with a radio) then it has the same effect as a factory reset - you lose all apps and data.
Look for just a suitable radio if you don't want to flash a ROM.

This is about the CustomRUU.exe file running through active sync..

Hi,
I'm back I have fixed the problem.
@ my hd2 is the spl version 3.00 installed also I can't install the hspl and i can't update the radio (my oem radio is 2.18).
I have only uploaded the android files to the card an run it. After 9 minutes the device restarted and now is froyo with sense running on my phone.
Special thanks to all (the xda app is great)
Sent from my HTC Desire using XDA App

[Q] cant get android working on my htc hd2

hi everyone i am currently trying to install android 3.2 on my htc hd2 and the steps i am following are to copy the android folder to the root of my sd card and then once i have done this then to tap on the CLRCAD file then tap the haret file then a loading bar comes up then goes to a black screen and in small writing in the top left hand corner it says
haret boot
shutting down hardware
turning off mmu...
in preloader
psr=600000df
tags preloaded to 0x11b00100 (size 0x0000f00)
kernel relocated to 0x11b0b000 (size0x0023f12c)
initrd relocated to 0x12200000 (size 0x001d0137)
jumping to kernel...
i have repeated this process a dozen times to ensure that i have not missed anything out last nite i made sure that the battery was fully charged and also i updated my rom from the htc website to the latest version as i have read that some people cant get android working at all unless they did this. i did the process until i got the black screen again and left it all night thinking that it may take a long timer as it is the first time i have ever tried loading android but i woke up and the screen was still there i am not sure what i have done wrong i have watched videos on youtube and read forums but no one else seems to have had this problem any help would be greatly appriciated thanks
i have just tried to boot an older version of froyo android the 2.2v i got past the first black screen and it went to the black screen where the white writing starts to scroll down the the writing faded into white lines what am i doing wrong

back up your sdcard contents to your computer.
format it, preferably from a linux box. if your stuck with win-blows, then you can do a full format, not the quick format.
now put JUST THE ANDROID folder on the sdcard.
put sdcard in phone, boot into android. when it boots, dont do ANYTHING for 5 min. reboot.
once it reboots, goahead and log in, synch etc.... then reboot
after that you can coppy the rest of the sdcard contents back over and be good to go.

which winmo rom, radio rom, and android build are u using?

i am using the darkstone froyo 3.7 build i am not sure what radio is or which one i am using i will try what you have suggested and let you know how it goes

right i formated (full) the sd car using windows vista the only way i could do this is plugging my phone into my laptop using the usb and formatting it that way
then i copied just the android folder to my sd card
rebooted the phone and went to file explorer opened the android folder doulbe clicked on clrcad then on haret
i was then stuck on the screen that i was before so i waited 5 mins just like you said to rebooted the phone and it was still on windows.
i repeated the same steps and waited ten minutes still no luck
also just so i understand after i waited five minutes should i be able to reboot the phone i do i have to pull the battery out like i did and where you put (when it reboots login etc)
is there any way you could email me a file to see if it is the files i am using
thanks for all you help so far guys!!!!
i am from th UK i dont know if that makes a difference
i have a 2gb sd card

i have just done some research on the radio versions and round a thread called master radio for the htc hd2 on xda but i am unsure which one to use and could this be the root of my problem thanks again
OS version 8.2.2.1869(21869.5.0.82)
manila version 2.5.20121429.0
ROM version 1.72.206 (8637200) WWE
ROM date 04/15/10
radio version 2.07.51.22_2
Protocol version 15.32.50.07U

i have just done a bit more research and found out that i need to use a .50 for flashing could this be a problem if i dont could this be th root of my problem

very big part I'd say.... It does say on just about EVERY build that you need a .50 radio NOT a .51....

snowy88 said:
i have just done a bit more research and found out that i need to use a .50 for flashing could this be a problem if i dont could this be th root of my problem
Click to expand...
Click to collapse
could be...

u need at least 2.08.50 or higher radio i thought so.
linkie he Definitve Guide To Android On HTC HD2
[RADIO] The HTC HD2 Master Radio Thread ( i would try Leo_RADIO_2.12.50.02_2 or 2.14 )
Good luck tell us when it did work

t1h5ta3 said:
back up your sdcard contents to your computer.
format it, preferably from a linux box. if your stuck with win-blows, then you can do a full format, not the quick format.
now put JUST THE ANDROID folder on the sdcard.
put sdcard in phone, boot into android. when it boots, dont do ANYTHING for 5 min. reboot.
once it reboots, goahead and log in, synch etc.... then reboot
after that you can coppy the rest of the sdcard contents back over and be good to go.
Click to expand...
Click to collapse
snowy88 said:
i was then stuck on the screen that i was before so i waited 5 mins just like you said to rebooted the phone and it was still on windows.
i repeated the same steps and waited ten minutes still no luck
also just so i understand after i waited five minutes should i be able to reboot the phone i do i have to pull the battery out like i did and where you put (when it reboots login etc)
Click to expand...
Click to collapse
no, depending on the class (speed) of your card it'll take 15-20 min to initalize on the first boot... theres alot going on in the background.
once its booted...ie: once it shows the initial android log in screen. ie: it has actualy booted into android.
if you pull the battery in the middle of the first boot, you just corupted the data it was writing.
format the card again - get rid of the corupted files.
now start over.
and yes, you got to have the corect radio installed etc.
most roms have a requirements list... if not folow the stickies.
as ive stated a ton of times in a ton of thereads, its worth installing ether droid explorer or adb on your pc if for no other reason but to be able to run a logcat so you can watch it run comandline, aswell as post it so others can help you debug/troubleshoot.

I have the same issue with linux showing that message then it boots up a green htc sign and stays there.. i left it there for 40 minutes waiting to see if anything would happen and never did. I had android running before but did a full format on my sd card and then installed another and this happens everytime i try.
I am running Miri_Dinik- V 19.0 WWE
Radio: 2.15.50.14
I also am using the 16g sd card that came with my tmo hd2
i have been searching for days for an answer and decided to finally make a post to see if i can get any answers
thanks

[Q] Android dies after a few days - resets to windows on boot

Hi,
I seem to be having bad luck with my android installs.
I have an HD2 running the excellent Duttys ML v6 WWE rom with 2.15.50.14 radio.
I've added a variety of Android ROMS from Mdeejay and MDJ. They all work flawlessly for a few days. The only apps I added were Yahoo, quick settings and (for my sins) AngryBirds. Again, they all work OK.
Then after a few days, an update message might appear top left. If I install it, all is well until I reset the phone. Boots to windows, but when I tap Haret, it starts to load, then resets and loads windows again. Android is now dead and will not boot.
So now, I thought, ignore the updates. All good for a few days, until the battery went flat (as it does!). After charging it back up, again, the same problem, Android is dead, and just restarts to windows on booting Android.
To get Android back on the phone, I have to format the SD card, then copy everything across again. I have now done this 4 times due to Android messing up.
Has anyone else seen had this problem? I have had a look through the forum and can't find anything else similar.
They have just given me an HTC Desire as a work phone which is excellent, but I would really like to get my HD2 running Android reliably!
Thanks for your time, Chris.

Format card with this
Then run Android as normal (reading any build instructions) then dont be a dumbass and install official updates to a non-official build of android.

TheATHEiST said:
Format card with this
Then run Android as normal (reading any build instructions) then dont be a dumbass and install official updates to a non-official build of android.
Click to expand...
Click to collapse
I appreciate your help, but there is no need to be rude, we are not all HD2 gurus!
The only updates that have appeared are for apps that I have installed - angry birds for example. Not sure how this could kill an OS, be it official or otherwise.
Thanks for the SD formatter though. I will give this a go this morning and see how it goes...

whoops double post. damn ff.

Utterpiffle said:
I appreciate your help, but there is no need to be rude, we are not all HD2 gurus!
The only updates that have appeared are for apps that I have installed - angry birds for example. Not sure how this could kill an OS, be it official or otherwise.
Thanks for the SD formatter though. I will give this a go this morning and see how it goes...
Click to expand...
Click to collapse
ahhh you are referring to "app" updates, you never said that in your OP, I assumed you was referring to OS updates of some kind.
Updating a app will not have broken your Android build, It was just a coincidence unless its a app that affects system files maybe.

[Q] htc hd 2 android

hi guys
i have a little problem with my htc hd2
i flashed my radio to a 2.14.50.04
i put a rom on it
and hsspl 4
now when i want to start android it gets tuck at jumping to kernel and goes to a white screen with green letters
can someone explane what i can doe now beaucausei'm stuck
greets matthias

I'm guessing you're talking about SD card android roms.
If so, is the android folder at the root of your sd card? Are all the the contents of the folder in there?
zimage, intrid, system image, blank data image (if the build requires you to have one, some builds make their own data.img) , all of those are in there? And you tried CLRCAD then haret right?
Also how long did you wait on the HTC screen? 20 mins? You should have if you didn't.
If you didn't wait 20 mins, and the build you are using is one that makes its own data.img, delete it. Retry running android.
If you know not of anything in what i've stated go search and read.

hi
jep all the files are in there and the phone starts again after the htc screen
when can i seee if it maks his own data ?

In the android folder. o.o
If you didn't have to put in a blank data image into the android folder or it didn't come with one, then it is an android build that makes its own.
You can also see in the startup.txt to see if it makes one.
If you see something like this data_size=512, in the startup.txt , it is making its own data image, of size 512 mb. To change the size simply change data_size= something else
eg data_size=1024, creates a 1gb data image.

i don't get it
there is a data file of 512mb
butt is that file the problem?

can someone please help beausause i'm getting crazy

If there is, then simply try reboot android. o.o I already said this in my first post...
At max it should take 20 mins for first boot. If it still doesn't boot, then maybe that build doesn't work (you should read the last pages of every build you want to try to see what works and what doesn't), try a different build.

hi
i ddid but after 30 sec the phone starts again in windows
i tried 3different builds

cyanogenmod 7 v2.6 (gingerbread) on HTC HD2
After installation MDJ’s CyanogenMod 7 v2.6 (gingerbread 2.3) I
experience the following problems on my HTC HD2 (dutch HD2 with latest
Radio):
After ending a call or pushing the end-call button, the HD2 buttons
stay on and the screen stays black and doesn’t respond at all.
I have to remove the battery to reset my HD2.
sorry for my english, i hope you understand my issue here.
By the way I’ve installed MAGLDR v1.3, and CWM 1.3 and HSPL->SPL2.08
on the device.
Everything works perfect except the above
Please HELP!!

Try a different winmo rom? You can try task 29, then flash the winmo rom. Also insignificant in my opinion, but may play a cause in your problem, which HSPL did you install? I know you installed HSPL 4, but be specific, which one from the menu it offered? Eg. I have HSPL 2.08 which is the most popular for running android.

@aem
I'm sorry but I've never experienced your problem before, nor have I tried MDJ's Cyanogen build extensively before. Well as they say if this doesn't work properrly, try something else. Meaning, try a different build and see how it plays out. Use titianium to backup anything you'd like.

i now am runnin the newest hspl i think it is 3.33..
the rom was miri_steve0007
now i am downloading energy leo rom
and a different radio

else can't you just tell me from the beginning what i have to do for playing android?

May have no effect what so ever, but install HSPL 2.08, maybe it might fix your problems. Your case is weird one to me. @[email protected]

For sd android. Theoretically and for some, there are no requirements for android except for a radio later than 2.08, Build and HSPL shouldn't matter, but it did for some.
The android folder should be at the root of your sd card meaning /android, and one should simply run CLRCAD then HARET and done, android should boot up.
If you're looking to run android off NAND (your phones internal memory, removing winmo completely) You need a radio later than 2.08, HSPL 2.08 and MAGLDR installed.

got a new prob
the htc wont load any image anymore its allways stuck at 0%

does somebody knows what i should do?

Ouch, all flashing just stops? Is the phone in bootloader mode? The tri color screen I mean.
I'm sorry but this is where my knowledge stops, sorry, i can't think of anything else to help you with right now. Worst case scenario, your device might acutally be having hardware problems and needs to be repaired.