Database Users

[q] android build good for 1 launch only w/ reboot resulting in failure

OK FELLAS,
i'm not a noob. been flashing for a while now and am pretty much tech savvy, but this one has me for a loop. recently, my phone just started doing this; i can install and launch any and all android builds so readily available here from the XDA chefs. EVEN the DARKSTONE DESIRE HD BETA 2 worked and i played with it for an hour or so. HERE IS THE PROBLEM; i used to in the beginning be able to boot android over and over and over with my android launcher icon thats built into the current energy rom im using. (24631 04 sep) however now after a reboot, I run into a brick wall with the prompt that reads "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off"
here are the things i have tried to remedy this:
1. format card= didnt fix
2. try a different card= i have 3 different cards; this didnt fix it either.
Only thing i havent tried which i am reluctant to try is task 29 and reload the WINMO ROM.
ANYONE ELSE OUT THERE EXPERIENCING THIS AND IF SO, HOW DID YOU FIX IT?

bluevmax92 said:
OK FELLAS,
i'm not a noob. been flashing for a while now and am pretty much tech savvy, but this one has me for a loop. recently, my phone just started doing this; i can install and launch any and all android builds so readily available here from the XDA chefs. EVEN the DARKSTONE DESIRE HD BETA 2 worked and i played with it for an hour or so. HERE IS THE PROBLEM; i used to in the beginning be able to boot android over and over and over with my android launcher icon thats built into the current energy rom im using. (24631 04 sep) however now after a reboot, I run into a brick wall with the prompt that reads "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off"
here are the things i have tried to remedy this:
1. format card= didnt fix
2. try a different card= i have 3 different cards; this didnt fix it either.
Only thing i havent tried which i am reluctant to try is task 29 and reload the WINMO ROM.
ANYONE ELSE OUT THERE EXPERIENCING THIS AND IF SO, HOW DID YOU FIX IT?
Click to expand...
Click to collapse
What Rom radio you using?
Are you using an auto boot or multiboot
Are you renaming the folder to Android and putting that folder on root? And dies your startup file read rel_path=android
If all correct
Seems like task29
And new Rom radio is the answer
Sent from my HTC HD2 using Tapatalk

whynot66 said:
What Rom radio you using?
Are you using an auto boot or multiboot
Are you renaming the folder to Android and putting that folder on root? And dies your startup file read rel_path=android
If all correct
Seems like task29
And new Rom radio is the answer
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Radio_2_12_50_02_2
AND ROM IS ENERGY 24631 04 SEP 2010
HSPL3
ALSO AN UPDATE; REFLASHED 24631 UPDATED DATE,TIME,QUICK GPS, AND THEN GET THIS; IT BOOTED DESIRE HD ROM SUPER QUICK BUT OTHER BUILD IM USING Core_Droid_V.0.2 STILL DIDNT WORK. IM GONNA TRY DROPPING ANOTHER ROOTFS.IMG ON THE CARD AND TRY AGAIN.

I had a similar problem, the problem was that I had unzipped the contents of the "android" folder to the root of my SDcard. What I should have done was copy the folder to the root of the SDcard, after I did this it worked perfectly

I have the same problem here, but not only with the DARKSTONE DESIRE HD BETA 2 ROM. A lot Android ROMs boots great the first time, but after a phone reboot I was unable to boot the Android ROM again.
It shows me these message: "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off" or the boot loader freezed completely with some stripes on the screen. any ideas?
RAIDO: 2.08.50.05
ROM: Artemis 30.0 GER (5.2.23576)
Update:
Got a solution from this thread: http://forum.xda-developers.com/showthread.php?t=788764
Just extract your DARKSTONE DESIRE HD BETA 2 ROM into "/Storage Card/Android" and boot it. done!

All you have to do is delete the android folder everytime you boot up android. I was running into the same thing after the initial setup worked good but wouldn't boot back after I went back to windows.
Sent from my HD2 running Darkstone Froyo V2.1

Stuck on HTC please help!!!

So I've tried to install android build. I had stock rom 3.14.479.2 and I've tried to install HD2Froyo_V3. I've followed the instruction and after running haret few lines of text showed and than nothing, htc display appeared and stayed that way until I've removed the battery. Then I've read that I have to flash a coked Rom in order to install build for android so I downgraded it to 1.48 so I can install HSPL (not sure that it was necessary). I've flashed Energy.Leo.21916.Sense2.5.Cookie.Nov.02 with Radio_2_12_50_02_2 and copied Android folder again, same result. After flashing between stock Rom and Energy.Leo.21916.Sense2.5.Cookie.Nov.02 million of times I'm out of options. The same problem I had with FroyoStone_Sense_V3.2 too. It seemed so easy when I saw it on youtube and I can not believe that I had so bad luck. What I've done wrong? What should I do?
Anyone help?

One word: wait!
the kernel usually creates a 1GB storage for android. This will need some minutes (can take up to 10 minutes on class 2)
Some words for ROMs. Nearly all ROMs will work (the 2.14 ROMs don't) as long as you have a new radio. use 2.10 or higher. some have robo voice problems when calling. if you experience robo try another Radio.
(you should post questions like that in android development discussion. this subforum is for development only)

The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.

Ultimaex is right. Creating a 1gb storage for android will take some time, be patient. I have a 2gb storage which took about 20 minutes from start to finish.
fyi, my setup is tmous stock rom 3.14 and tytung's NexusHD2-FRG83 Froyo 2.2.1 build.

Mr_Q said:
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Click to expand...
Click to collapse
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...

mila1909 said:
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
Click to expand...
Click to collapse
Ive had this happen to me when I was switching builds. I deleted everything on my sd card that was related to android. Usually, the folders that android makes on your sd card are all lowercase letters. The folders are start with a capital letter are Windows Mobile specific folders. So delete all those folders, dont forget to show hidden files just to make sure you get all the folders. Afterwards, with whatever build you plan on using, its probably best to re-download that build just to make sure no files were edited and copy them to your sd card.
Basically just start with a clean slate and you should be good to go.

i had the same problem just reformat ure memory card on ure htc hd2

I formated the sd every time I tried. It's not that

Same
I got the same problem I have tried everything waited more dan 20 minutes. Formatted 25 times. Iam searching all forums to find something

Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?

I use 2.15.50.14 now, bit tried with every radio over 2.8

fig_jam_uk said:
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
Click to expand...
Click to collapse
Iam now trieying what you said. I let u know about it.
I use radio 12.50

nope, again not working...I am desperate

mila1909 said:
nope, again not working...I am desperate
Click to expand...
Click to collapse
Same format didnt help, iam now gonna try other kernels.

well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now

mila1909 said:
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
Click to expand...
Click to collapse
I got energy rom 2 and hspl3 gonna try that android build i let you know if it works. try to use the zImage from mattcleofroyo with another build.

That build didnt work for me after jumping kernel my leds flashed an i got whit streak.

coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
That's normal at the first boot, he wrote it in his thread.. Was the same for my phone, just let it doin' his thing it will finish after about 10min.
And what I wanted to say, I think mattc 1.8 is one of the best Sense builds out there.. Works so damm' smooth. Old but gold

Yes I agree. I've tried several after this one and got back on mattc...There are few problems but I hope that will be fixed in other versions....

coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
You mean you got all kinds of distorted graphics all over the screen. Black and white stripes kind of thing? If so, that's because you probably replaced zImage but didn't replace initrd.gz. Regardless, if you leave it on the screwed up black/white screen, it should load within 10-15 min.

[Q] cant get android working on my htc hd2

hi everyone i am currently trying to install android 3.2 on my htc hd2 and the steps i am following are to copy the android folder to the root of my sd card and then once i have done this then to tap on the CLRCAD file then tap the haret file then a loading bar comes up then goes to a black screen and in small writing in the top left hand corner it says
haret boot
shutting down hardware
turning off mmu...
in preloader
psr=600000df
tags preloaded to 0x11b00100 (size 0x0000f00)
kernel relocated to 0x11b0b000 (size0x0023f12c)
initrd relocated to 0x12200000 (size 0x001d0137)
jumping to kernel...
i have repeated this process a dozen times to ensure that i have not missed anything out last nite i made sure that the battery was fully charged and also i updated my rom from the htc website to the latest version as i have read that some people cant get android working at all unless they did this. i did the process until i got the black screen again and left it all night thinking that it may take a long timer as it is the first time i have ever tried loading android but i woke up and the screen was still there i am not sure what i have done wrong i have watched videos on youtube and read forums but no one else seems to have had this problem any help would be greatly appriciated thanks
i have just tried to boot an older version of froyo android the 2.2v i got past the first black screen and it went to the black screen where the white writing starts to scroll down the the writing faded into white lines what am i doing wrong

back up your sdcard contents to your computer.
format it, preferably from a linux box. if your stuck with win-blows, then you can do a full format, not the quick format.
now put JUST THE ANDROID folder on the sdcard.
put sdcard in phone, boot into android. when it boots, dont do ANYTHING for 5 min. reboot.
once it reboots, goahead and log in, synch etc.... then reboot
after that you can coppy the rest of the sdcard contents back over and be good to go.

which winmo rom, radio rom, and android build are u using?

i am using the darkstone froyo 3.7 build i am not sure what radio is or which one i am using i will try what you have suggested and let you know how it goes

right i formated (full) the sd car using windows vista the only way i could do this is plugging my phone into my laptop using the usb and formatting it that way
then i copied just the android folder to my sd card
rebooted the phone and went to file explorer opened the android folder doulbe clicked on clrcad then on haret
i was then stuck on the screen that i was before so i waited 5 mins just like you said to rebooted the phone and it was still on windows.
i repeated the same steps and waited ten minutes still no luck
also just so i understand after i waited five minutes should i be able to reboot the phone i do i have to pull the battery out like i did and where you put (when it reboots login etc)
is there any way you could email me a file to see if it is the files i am using
thanks for all you help so far guys!!!!
i am from th UK i dont know if that makes a difference
i have a 2gb sd card

i have just done some research on the radio versions and round a thread called master radio for the htc hd2 on xda but i am unsure which one to use and could this be the root of my problem thanks again
OS version 8.2.2.1869(21869.5.0.82)
manila version 2.5.20121429.0
ROM version 1.72.206 (8637200) WWE
ROM date 04/15/10
radio version 2.07.51.22_2
Protocol version 15.32.50.07U

i have just done a bit more research and found out that i need to use a .50 for flashing could this be a problem if i dont could this be th root of my problem

very big part I'd say.... It does say on just about EVERY build that you need a .50 radio NOT a .51....

snowy88 said:
i have just done a bit more research and found out that i need to use a .50 for flashing could this be a problem if i dont could this be th root of my problem
Click to expand...
Click to collapse
could be...

u need at least 2.08.50 or higher radio i thought so.
linkie he Definitve Guide To Android On HTC HD2
[RADIO] The HTC HD2 Master Radio Thread ( i would try Leo_RADIO_2.12.50.02_2 or 2.14 )
Good luck tell us when it did work

t1h5ta3 said:
back up your sdcard contents to your computer.
format it, preferably from a linux box. if your stuck with win-blows, then you can do a full format, not the quick format.
now put JUST THE ANDROID folder on the sdcard.
put sdcard in phone, boot into android. when it boots, dont do ANYTHING for 5 min. reboot.
once it reboots, goahead and log in, synch etc.... then reboot
after that you can coppy the rest of the sdcard contents back over and be good to go.
Click to expand...
Click to collapse
snowy88 said:
i was then stuck on the screen that i was before so i waited 5 mins just like you said to rebooted the phone and it was still on windows.
i repeated the same steps and waited ten minutes still no luck
also just so i understand after i waited five minutes should i be able to reboot the phone i do i have to pull the battery out like i did and where you put (when it reboots login etc)
Click to expand...
Click to collapse
no, depending on the class (speed) of your card it'll take 15-20 min to initalize on the first boot... theres alot going on in the background.
once its booted...ie: once it shows the initial android log in screen. ie: it has actualy booted into android.
if you pull the battery in the middle of the first boot, you just corupted the data it was writing.
format the card again - get rid of the corupted files.
now start over.
and yes, you got to have the corect radio installed etc.
most roms have a requirements list... if not folow the stickies.
as ive stated a ton of times in a ton of thereads, its worth installing ether droid explorer or adb on your pc if for no other reason but to be able to run a logcat so you can watch it run comandline, aswell as post it so others can help you debug/troubleshoot.

I have the same issue with linux showing that message then it boots up a green htc sign and stays there.. i left it there for 40 minutes waiting to see if anything would happen and never did. I had android running before but did a full format on my sd card and then installed another and this happens everytime i try.
I am running Miri_Dinik- V 19.0 WWE
Radio: 2.15.50.14
I also am using the 16g sd card that came with my tmo hd2
i have been searching for days for an answer and decided to finally make a post to see if i can get any answers
thanks

[Q] htc hd 2 android

hi guys
i have a little problem with my htc hd2
i flashed my radio to a 2.14.50.04
i put a rom on it
and hsspl 4
now when i want to start android it gets tuck at jumping to kernel and goes to a white screen with green letters
can someone explane what i can doe now beaucausei'm stuck
greets matthias

I'm guessing you're talking about SD card android roms.
If so, is the android folder at the root of your sd card? Are all the the contents of the folder in there?
zimage, intrid, system image, blank data image (if the build requires you to have one, some builds make their own data.img) , all of those are in there? And you tried CLRCAD then haret right?
Also how long did you wait on the HTC screen? 20 mins? You should have if you didn't.
If you didn't wait 20 mins, and the build you are using is one that makes its own data.img, delete it. Retry running android.
If you know not of anything in what i've stated go search and read.

hi
jep all the files are in there and the phone starts again after the htc screen
when can i seee if it maks his own data ?

In the android folder. o.o
If you didn't have to put in a blank data image into the android folder or it didn't come with one, then it is an android build that makes its own.
You can also see in the startup.txt to see if it makes one.
If you see something like this data_size=512, in the startup.txt , it is making its own data image, of size 512 mb. To change the size simply change data_size= something else
eg data_size=1024, creates a 1gb data image.

i don't get it
there is a data file of 512mb
butt is that file the problem?

can someone please help beausause i'm getting crazy

If there is, then simply try reboot android. o.o I already said this in my first post...
At max it should take 20 mins for first boot. If it still doesn't boot, then maybe that build doesn't work (you should read the last pages of every build you want to try to see what works and what doesn't), try a different build.

hi
i ddid but after 30 sec the phone starts again in windows
i tried 3different builds

cyanogenmod 7 v2.6 (gingerbread) on HTC HD2
After installation MDJ’s CyanogenMod 7 v2.6 (gingerbread 2.3) I
experience the following problems on my HTC HD2 (dutch HD2 with latest
Radio):
After ending a call or pushing the end-call button, the HD2 buttons
stay on and the screen stays black and doesn’t respond at all.
I have to remove the battery to reset my HD2.
sorry for my english, i hope you understand my issue here.
By the way I’ve installed MAGLDR v1.3, and CWM 1.3 and HSPL->SPL2.08
on the device.
Everything works perfect except the above
Please HELP!!

Try a different winmo rom? You can try task 29, then flash the winmo rom. Also insignificant in my opinion, but may play a cause in your problem, which HSPL did you install? I know you installed HSPL 4, but be specific, which one from the menu it offered? Eg. I have HSPL 2.08 which is the most popular for running android.

@aem
I'm sorry but I've never experienced your problem before, nor have I tried MDJ's Cyanogen build extensively before. Well as they say if this doesn't work properrly, try something else. Meaning, try a different build and see how it plays out. Use titianium to backup anything you'd like.

i now am runnin the newest hspl i think it is 3.33..
the rom was miri_steve0007
now i am downloading energy leo rom
and a different radio

else can't you just tell me from the beginning what i have to do for playing android?

May have no effect what so ever, but install HSPL 2.08, maybe it might fix your problems. Your case is weird one to me. @[email protected]

For sd android. Theoretically and for some, there are no requirements for android except for a radio later than 2.08, Build and HSPL shouldn't matter, but it did for some.
The android folder should be at the root of your sd card meaning /android, and one should simply run CLRCAD then HARET and done, android should boot up.
If you're looking to run android off NAND (your phones internal memory, removing winmo completely) You need a radio later than 2.08, HSPL 2.08 and MAGLDR installed.

got a new prob
the htc wont load any image anymore its allways stuck at 0%

does somebody knows what i should do?

Ouch, all flashing just stops? Is the phone in bootloader mode? The tri color screen I mean.
I'm sorry but this is where my knowledge stops, sorry, i can't think of anything else to help you with right now. Worst case scenario, your device might acutally be having hardware problems and needs to be repaired.

[Mar 04][Q] Android on SD

Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~

gameg2l said:
Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~
Click to expand...
Click to collapse
Ha I guess you did not like the first option, so I will edit the whole post.
Running Andriod from SD is very simple as long as you follow the instructions to the T. If the Andriod folder you copied to your SD card has another folder in it that you have to open to get to CLRCLAD and HARET then you need to copy that folder to the root of your SD card. It is also important the name of the folder is Andriod. The first time you boot the Andriod it can take up to ten minutes sometimes cause it has to creat folders, files, and pathways. So maybe you are not giving it enough time to boot all the way up beforeo you hit the reset button or do a battery pull. Your SD card also needs to be formated correctly you want to format it usimg Fat 32, please make a back up copy of your card also if you reformat it as it will wipe it clean. Last but not least you may just have a bad download. Try redownloading the build and recopy it to your SD card then run CLRCAD and HARET.
The only thing a radio will do is cure robot sounding voices during a phone call while running Andriod but most builds now have that solved and are compatible with the current radio 2.15.50.14. Also when you touch on CLRCAD you will see or hear nothing it enables the sound on the Andriod build.
Last but not least being you have a TMOUS (T-Mobile) HD2. Be adviced that you most flash a radio version that has a 50 in the third set of numbers like 2.xx.50.xx. Do not flash a radio that has a 51 in the third set of numbers like 2.xx.50.xx. or a radio that looks like this 2.04.50.xx or 2.05.50.xx as they will brick your TMOUS HD2 reindering it usless for nothing but a paper wieght. And the only way to unbrick a HD2 is with a JTAG and a ORT wich will cost you and you will have to take your HD2 apart to fix.

O_O is the issue that difficult?
I don't mind calling though
Thanks

gameg2l said:
O_O is the issue that difficult?
I don't mind calling though
Thanks
Click to expand...
Click to collapse
I sent you s PM, look at the top right hand corner of your screen and you should see you have a mwssage click on it.

Any luckwith getting it to boot yet?

Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App

gameg2l said:
Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
I use a Gingerbread build too.