I have installed many different android versions , all are working good but when i reboot and go back to android command line says "/bin/sh: can't access tty; job control turned off" and and under that text "/# [52.9114021 ACR=3107 FL1256 RAAC=60" what that means ? how i can boot android many times without allways installing android again... before /bin/sh: can't access tty; job control turned off it says mount: mounting/dev/block/loop0 on /data failed: invalid argument Failed failed to mount /data
When you start Android from SD card with Haret it creates an Android folder for cache and etc. When you reboot your phone and want to start Android again delete the Android folder from the SD card before you do it and it works fine again.
i just have one android folder and it has haret.exe and other files inside
One solution (not sure if it will work in your case - has been working perfectly for me) don't copy the files in the root - instead make a folder e.g AndroidTest and copy everything inside this folder. You have to change your startup.txt to reflect this change as followings:
set cmdline "rel_path=AndroidTest"
Now start your clrcad and haret.exe from within this folder.
OK , i found the problem ... i think , i have 32GB memory card (Sandisk) and it did not work , then i tried small 2GB (nokia) card and its working good ! 32GB has really slow writing speed but i dont know is that the problem...
i've noticed i can NEVER reboot. i'm gonna try deleting the android folder but that is kind of retarded... this seriously keeps me from playing with it.
in my experience if i try to reboot it will fsck forever on the sd card
is there a preferred method to restart the phone without corrupting the sd card ?
hi!
hi friend,
after you first reboot. if your back in winmo use your file explorer and explore your sd card. look for the folder name android and just delete.its a bug.
you are entirely correct. i tried it but didnt post back. that was the problem. i can successfully reboot android now! thank you
I tried this. I also have the gen y dualboot installed on my device. After I deleted the android folder and tried to reboot android, some where in the command line it says "cannot create android folder" then scrolls down and says rebooting in...5, 4, 3, etc. and it just restarts my phone, and doesnt load android. can someone help me?
Related
Don't know how or why but my HD2 was running fine prior to reboot. Now my little Android logo that I would normally select has disappeared. I can easily choose to start Haret without an Icon in file manager. It starts the boot process. I even get the flash and the crazy lines. Rather than boot Android though it restarts and gives me "sh.tdows".Here is what is on my sd card now when I look in file manager. I also cannot get my windows xp computer service pack 2 to read the hd2 when I plug it in so I can access the sd card like a drive? Obviously I've read the tutorials but I can't find what I'm missing.
Data
Media
CLRCAD
Data
Haret
Initrd
Readme
Rootfs
Startup
system
ts - calibration
zimage
hi
when i be on android and put a file on sd i can't see it on file manager
i use ics
thanks
go to the android market and try out "ES File Explorer" ... it is the best in my opinion. not sure if this will really help, however, it could not hurt!
thanks
but the program already on my device and i try it but the same problem on file manager
have you formatted your sd since flashing the ICS rom? try formatting a full fat32 (and ext partition as needed). i read up a little and sometimes old info and files from a previous version of android can cause problems.
Why do you need to see it anyway? SD Android is dual booted with NAND Android only through MAGLDR, so there isn't any point in being able to see it cos you can't launch it from the file manager.
I am also facing similar issue. To make the files visible, I have to reboot the phone. I also use bluetooth option to transfer files to avoid this problem
please the problem steel on my device
i got a new 8gb card for my phone today copy all the old stuff off the old one and put the new one in but having problems with it phone wont detect it correctly just saying preparing sd card testing for errors and thats it tried a few reformats and reinstalls of the os but still the same.
does the phone detect the empty sd-card?
try to create folder or smth like that on the empty sd-card in the phone
before format sd-card and put it in phone, try to detect empty one
(maybe restart phone and let it detect from new sd-card (empty one))
then create there a folder or just copy data on it and try again (dont know what you did until now maybe you already done smth like that then i don't know too atm)
or let the phone format the new sd-card that should normally work!
-> put new sd-card in
-> let phone format it
-> reboot
-> try to access sd-card and create a folder if you want or copy data on it
got it to work fine now but every time i try to transfer a large file via usb i get a read i/o error message on the computer then the phone wont detect the card again untill i delete this file
usb debugging is disabled
file size ? and what kind of system are you using?
both a 599mb and 634mb avi files both give me this read i/o error
my phones running froyobread v023b on stock kernal
did you try same with old sd-card ? (if it has more than 1gb you can try)
if you get same error it's not the roms fault
i use froyopro and i copy 1gb file atm but i think i dont get error...
can you post the error somehow? got a camera to make a photo or smth like that? or just write what it says
here is what i get
if you search for that error there are many ppl with those problems you could try to find a way to solve it buy using google
you can also try reboot your pc and try to copy data again sometimes that solves problems
also it could be that it's a error because of the cable you connect your phone to pc
(try out old sd-card and copy files if same problem exist) it's not because of the phone
can you copy smaller files to the sd-card?
thanks it seems to be behaving now just copied a few large files and its working correctly now to fill up some my my 8gb sandisk ultra fast
your hdd can also cause i/o erros when you try copy files so just don't think if it doesn't work the sd-card is not good.
causes can be:
HDD,cable,usb port, system error,or sd-card error,or sd-card reader in phone. software from phone and so on so it's hard to find where it the problem ...
mine did this too, but a format and a reset resolved the problem
Hello everyone.
I have Galaxy S4 I9500 with Rom and root based on Android 4.3 .
I have 8GB phone and 32GB SD CARD and i have downloaded many games and i'm run out of phone memory ..
so when i'm trying to move them by Folder Mount it says that it did move and everything is alright but when i open the game nothing happens, it download it data files again..
I'm having the same problems aswell! It says downloading resources when i open the app!
BubiDownload said:
Hello everyone.
I have Galaxy S4 I9500 with Rom and root based on Android 4.3 .
I have 8GB phone and 32GB SD CARD and i have downloaded many games and i'm run out of phone memory ..
so when i'm trying to move them by Folder Mount it says that it did move and everything is alright but when i open the game nothing happens, it download it data files again..
Click to expand...
Click to collapse
Well first of all uninstall and install folder mount. And you should correctly mount the folder. First hit "+" icon on the top. A new window opens. There is Name, Source and Destination. Write the name of game( any one you like) in Name. Now tap on Source. This is the important step. You should properly browse the folder. If you have obb then browse like Android>obb>com.Nameofgame. After you reach the game file folder you will see nothing except up. When you reach here Click "Right" icon ( sorry i dont have that icon so i wrote in words). After that a new window will open and prompt you to create destination folder automatically. Hit yes. Then Hit "right" icon on the top. Then you will be prompted to move the file. Hit yes. After the file is moved Click the icon (something like pin and is white in colour) on the right to your name of game. It is for mounting the folder. If turns green then you have successfully mounted your folder
Hello. I have galaxy S4 m919. Phone has 16 gb, but getting low. One of my biggest files is, thumbnails cache. 1.2 gb. I tried to link that folder, but after rebooting, my external memory card shows up in file manager as the cache folder, and I cannot navigate out of that into my card. Any thoughts?
Hi, I'm new in all this stuff and as the title says I have a bootloop on my Blu Studio 5.0 II. So this is what happened, I rooted my phoe with the KingRoot app, everything went great, I did this because I wanted to use my SD card as Internal storage so I can download more apps (Blu Studio 5.0 II only has around 1 GB of Internal memory), I tried using extarnal to internal but this result in my phone not even recognizing my sd card, so I tried a different way, editing vold.fstab at /storage/etc, but this didn't work either, at settings>storage my phone shows 3 different storages: Internal, SD Card and Phone Storage (sorry if I translate something wrong my phone is in spanish I hope you know what I'm talking about), so afert I reboot my phone I had 1gb 1gb and 14gb, my sd card was at the last of this 3 storage instead of the first one, searching on internet I found "a solution" and this is when everything went wrong:
I copied the vold.fstab file to my pc, copy and paste the code, saved it, copied to my sd card ad paste it on /system/etc, with ES File Explorer and rebooted, this is when the bootloop started
I have a copy of the original vold.fstap and I did backup before this happen, so I tried to push the file with ADB Minimal and Fastboot as I saw on a video but I have erros like read-only file system, and if I try using adb shell > su It says [-] Connection to ui timed out, also adb root cannot run in production builds.
so I got tired of that and dowload a ROM that it's supposed to be the same as my model D532u and tried to use SP Flashtool but stuck on 0% I don't know I read that is a drivers problem but I had no problem with adb or fastboot
so I tried to fastboot flash system but I'm also stuck, it says "erasing 'system' ..." and nothing happens, it worked flashing recovery and boot.
can someone help me?