Database Users

[Q] Rebooting in 5 seconds

Seems as though there are a lot of people asking the same question but not getting any answers. So far EVERY build I have tried fails in the same manner except for dan's original froyo 2.2 which runs perfectly fine but has terrible power consumption and performance compared to other builds such as cm6 or shubcraft. Basically it's getting dumped into Android i.e [A N D R O I D] header and it runs through a load of errors which are impossible to read but I THINK they are kernel panics and stops at rebooting in 5 seconds. Anyone else experienced this?

its either startup.txt file is wrong or zimage is wrong

Stock zImage and STARTUP.TXT straight from the shubcraft 1.2b package. (build of choice). I had to add loop_partition=mmcblk0 to get it to get past that error and it wont actually boot into to linux kernel with any zImage other than it's own.

ayilm1 said:
Stock zImage and STARTUP.TXT straight from the shubcraft 1.2b package. (build of choice). I had to add loop_partition=mmcblk0 to get it to get past that error and it wont actually boot into to linux kernel with any zImage other than it's own.
Click to expand...
Click to collapse
are you using the HTC Extended battery for you're phone.. there's a known issue with the extended batteries and android.

ayilm1 said:
Seems as though there are a lot of people asking the same question but not getting any answers. So far EVERY build I have tried fails in the same manner except for dan's original froyo 2.2 which runs perfectly fine but has terrible power consumption and performance compared to other builds such as cm6 or shubcraft. Basically it's getting dumped into Android i.e [A N D R O I D] header and it runs through a load of errors which are impossible to read but I THINK they are kernel panics and stops at rebooting in 5 seconds. Anyone else experienced this?
Click to expand...
Click to collapse
joshkoss said:
are you using the HTC Extended battery for you're phone.. there's a known issue with the extended batteries and android.
Click to expand...
Click to collapse
I got same problem "rebooting in 5 seconds" by using below version
mattc Leo froyo 1.5
FroyoStone Series V1
shubCRAFT 1.2
But I can use both old version perfectly
mattc Leo froyo 1.4
shubCRAFT 1.1
Also all fullram version of zimage cannot work, I make sure I got correct startup.txt file, but still fail for me...
What is the meaning of "HTC Extended battery" ?
My battery model: BB81100 1230mAh
It is include when I bought my HD2
Any suggestion?

ayilm1 said:
Seems as though there are a lot of people asking the same question but not getting any answers. So far EVERY build I have tried fails in the same manner except for dan's original froyo 2.2 which runs perfectly fine but has terrible power consumption and performance compared to other builds such as cm6 or shubcraft. Basically it's getting dumped into Android i.e [A N D R O I D] header and it runs through a load of errors which are impossible to read but I THINK they are kernel panics and stops at rebooting in 5 seconds. Anyone else experienced this?
Click to expand...
Click to collapse
I had this same issue. Did a complete reformat and erase of the memory card and everything worked just fine!

rwholden said:
I had this same issue. Did a complete reformat and erase of the memory card and everything worked just fine!
Click to expand...
Click to collapse
joshkoss said:
are you using the HTC Extended battery for you're phone.. there's a known issue with the extended batteries and android.
Click to expand...
Click to collapse
No extended battery. Stock 1230. The problem is it doesn't even GET to Android. It kernel panics then reboots.
Tried formatting and copying everything over again. No go. Still same problem. I may try another sd but doubt it'll help.
Thanks for the input so far.

have you placed the android rom into a folder called android? not in the root of the memory card?

nutmegy said:
have you placed the android rom into a folder called android? not in the root of the memory card?
Click to expand...
Click to collapse
Yeah no problems there. I've done this with all the builds. It's finding the files no problem mate. It's crashing when opening system.img I think, seeing as though that's where it gets to.

Re: Rebooting in 5 seconds
Ayilm1,
you can add mem=336M in set cmdline.

miksi said:
Ayilm1,
you can add mem=336M in set cmdline.
Click to expand...
Click to collapse
Does that replace loop_partition? or just (space after mmcblk0 then) mem=336M

What zImage you are using? I am using DarkstoneFroyo build 26.07. and latest zImage and from http://htcleo.noobhands.net/manusfreedom/. Download zImage all files.zip.
I had a lots of problems with android builds and I think it's all due RAM memory being defective on my Euro T8585. So, with every build I had to add mem=xxxM to get it to work.
Off course, such a RAM won't let me play with TMOUS ROMs(576MB) and I had to use Artemis (with additional tweaks). Also with this I can't get size of RAM others can get.(128MB less).

miksi said:
What zImage you are using? I am using DarkstoneFroyo build 26.07. and latest zImage and from http://htcleo.noobhands.net/manusfreedom/. Download zImage all files.zip.
I had a lots of problems with android builds and I think it's all due RAM memory being defective on my Euro T8585. So, with every build I had to add mem=xxxM to get it to work.
Off course, such a RAM won't let me play with TMOUS ROMs(576MB) and I had to use Artemis (with additional tweaks). Also with this I can't get size of RAM others can get.(128MB less).
Click to expand...
Click to collapse
I'm using the stock zImage that comes with the 1.2b build because that's the only one that boots this far. ANY other zImage crashes as the kernel release. Where should I put the mem=336M? Should that replace the loop_partition statement?

Alright WTF???!!! Excuse the language but this is really starting to annoy me. So far, I have tried 1.2, 1.2a, 1.2b AND the latest 1.3. All of them have the same rebooting in 5 seconds issue. I am really starting to get annoyed. I think this is actually a kernel issue rather than anything else as none of the zImages other than the one in the original pack work. All fail to load the kernel.

Never mind. Solved I guess. Gave up and used the froyostone sense build instead. Working fine now.

[BUILD][11-22-2010][JDMode 1.0][Hastarin R8.4][PPP]

WELCOME TO JDMode!!​
About the build
As you guys know, I have a JDMS 1.5 build which is working pretty stable and working nice for me. So, I decided to stick with the defrost base and not drop it, instead, I decided to release another stable builds with different bases. I was looking around and came by this rom by AdamG named Oxygen. Then I decided to work on this rom by adding some tweaks and apps to make it stable for HTC Leo users. AdamG also did really good job adding features. Keep in mind, the rom still in beta, more features will be added later on. Read more about the rom here
Features
FM Radio
Stable PPP connection, no need for an rmnet build...(Thanks to latema)
Fast speed build without lagg or sod
Pretty cool theme
Automatic brightness works 100%
LedMeKnow app included to control led notifications..
There is a lot more to list...
Working
Everything is working for me...
Installition and tips
Extract the Android folder (with all files in in) to root of your SD Card. THIS IS IMPORTANT.
- You canot keep your data.img from other roms... Do a clean install please..(You can try if you want but don't come here crying )
- If you already have an Android folder on your SD Card DELETE IT OR RENAME IT, because this version MAY BE INCOMPATIBILE with older releases !!!
- After copyng everything to your SD Card ensure you have at least 600 Mb free space for data store
- After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET.
- On first run when there is an black htc logo, just give it time to complete, and wait for the data.img to be created.
- If you get some strange errors, or Android does not work, try to reformat SD card and try everything from the start.
If that does not help, I suggest you to change your rom and radio with my personal ones(Check my siggy!!!)
Downloads
JDMode 1.0.7z 107.46 MB
Extras
262mb data.img
512mb data.img
2GP data.img
3GP data.img
4GP data.img
Wifi Tethring
USB tethring
Special thanks
Cotulla
copenhagen: For the great helpful faq..
richardtrip
dan1j3l
hastarin
huanyu
michyprima
Cass67 - Specially
darkstone
ElbartoME
gauner1986
mattc
memin1857
NetRipper
shu8i
lucian777
V-b-n
Beta Testers..
Everyone on #htc-linux & #htc-linux-chat, devs at xda-forums

Screen shots​

Changelogs​
v1.0:
-Initial release..

and aggain

The last one, I promise....

screenshots please. Im 17 myself. Lol. But thunks bud. I will try out anyhow.

akbisw said:
screenshots please. Im 17 myself. Lol. But thunks bud. I will try out anyhow.
Click to expand...
Click to collapse
Screen shot coming soon too...

Have been anxiously awaiting a new build from you!

CM6? with Hastarin8.4 "Eb" ?
lol

avetny said:
CM6? with Hastarin8.4 "Eb" ?
YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Click to expand...
Click to collapse
Its not cm6 nor EB, its based on oxygen base by AdamG. You've learned how to update your kernels already...

avetny said:
CM6? with Hastarin8.4 "Eb" ?
lol
Click to expand...
Click to collapse
No, description says 'Oxygen' based, not CM6.
By the way, I kinda dig the theme. I's a bit overdone here and there, but it's got some really nice elements! Gonna stick with JDMS for now though, don't wanna give up on the CM features.

im just kidding

we like u man !!! thanks !

Download links are up, Enjoy...

atoore said:
Download links are up, Enjoy...
Click to expand...
Click to collapse
Thanks, downloading

data drop first thing.....running same winmo radio and ROM in your sig
please advise

Downloaded and running...
Quite cool.. A bit diff from others....
Will run and see how it goes..
so far got 2 comments:
1. Data icon color a bit dark when idle. can make it more visible?
2. Camera app after shoot, can't tap to view photo nor switch to video unless take another shoot....

Upgrade from 1.5 to 1.0 and having Camera force-close.

yeah i got the green screen from the camera flash w/o changing amything.

simon1219 said:
Upgrade from 1.5 to 1.0 and having Camera force-close.
Click to expand...
Click to collapse
I haven't tried either of atoore's builds, but I would assume that if you're trying to upgrade from his 1.5 build (different base, kernel, etc) to THIS 1.0 build, you might have a problem.. Try a clean install and see if that makes any difference. Hope this helps

froyo x red not working

downloaded this android http://www.multiupload.com/KOY1IS2G8L
when i run haret i get these error messages
line 8: Expected <varname>
unknown keyword: 'INITRD_OFFSET'
unknown keyword: 'rel_path'
unknown keyword: 'INITRD_OFFSET'
but then android starts up normally?!
i get the sprint and 4g animations
then its asks me to launch using either launcher which or zeam, i used both and they both are different in layout, i normally use launcher,
and my WIFI DOESNT WORK, i go to settings turn wifi on but it just says ERROR.
My MAIN PROBLEM IS WIFI SOlVED
Main problem now is that android keeps freeezing, carry on reading this thread

Okay I've edited it, try it now! Should work!

nasko_spasko said:
Try with another haret. Post or attach your startup.txt. ops sorry i didn'saw your startup
Click to expand...
Click to collapse
another haret? do u mean different android version, because if so i dont want 2.1 or 2.2 ive tried them and their not great, want to use froyo red

mickeystar said:
another haret? do u mean different android version, because if so i dont want 2.1 or 2.2 ive tried them and their not great, want to use froyo red
Click to expand...
Click to collapse
NONO forget it
just look the post above^^^^^^
I've attached the startup.txt and put the androit files to the root of sd, not to andboot

nasko_spasko said:
NONO forget it
just look the post above^^^^^^
I've attached the startup.txt and put the androit files to the root of sd, not to andboot
Click to expand...
Click to collapse
but my android still works i want wifi to work

Why are you using FROYO X RED 2011.02.06,
there is a newer release: FROYO X RED CAMERA 2011.02.24 FOR BLACKSTONE

mickeystar said:
but my android still works i want wifi to work
Click to expand...
Click to collapse
The startup, you have posted is very complicated and wrong! Try with that I've posted and download the latest kernel and modules from here

nasko_spasko said:
The startup, you have posted is very complicated and wrong! Try with that I've posted and download the latest kernel and modules from here
Click to expand...
Click to collapse
kk, im busy at the moment check this thread in like a few days times
what kernels do i use the link u posted has loads?

mickeystar said:
what kernels do i use?
Click to expand...
Click to collapse
Well, use the latest(first in list) htc-msm-linux. After the download completes, copy and rename zImage**** to zImage(replace the old zImage) the modules don't need rename, just delete the old modules. I've already posted that in the gingerbread thread, you can read it, take a look at the video, you will like it, I like it
more than FROYO X (I'm talking about the Gingerbread)

nasko_spasko said:
Well, use the latest(first in list) htc-msm-linux. After the download completes, copy and rename zImage**** to zImage(replace the old zImage) the modules don't need rename, just delete the old modules. I've already posted that in the gingerbread thread, you can read it, take a look at the video, you will like it, I like it
more than FROYO X (I'm talking about the Gingerbread)
Click to expand...
Click to collapse
are u telling me to use gingerbread instead of froyo x?
also do i launch using zeam or lanucher. ive been using launcher but my android keeps freezing so that nothing works and i have to restart my phone, ive using the latest modules and zimage but my phone still froze. ive not been able to use my android for more than 10 mins without it freezing

mickeystar said:
are u telling me to use gingerbread instead of froyo x?
also do i launch using zeam or lanucher. ive been using launcher but my android keeps freezing so that nothing works and i have to restart my phone, ive using the latest modules and zimage but my phone still froze. ive not been able to use my android for more than 10 mins without it freezing
Click to expand...
Click to collapse
There is something you mess up! Mine runs with Launcher Pro
Gingerbread is much better than froyo in general, but as I say there is a lot of work to do (the developers)!

i installed froyo red x camera but i don have txt input, i keep getting acore has stopped unexpectedly.....cant therefore sync contacts, sms or make calls as error keeps poppin up

nasko_spasko said:
There is something you mess up! Mine runs with Launcher Pro
Gingerbread is much better than froyo in general, but as I say there is a lot of work to do (the developers)!
Click to expand...
Click to collapse
So how do I stop android from freezing?

mickeystar said:
So how do I stop android from freezing?
Click to expand...
Click to collapse
I'll tell you how I'm doing it. I've just downloaded the gingerbread image, I used to boot it
with the pack(haret+startup) of froyo x, and I've updated the kernel, and modules ofcourse, and rootfs optionally! And it works for me.
BTW, try to put the device into 'Airplane Mode' and tell us if it freezes.
I'm really tired now, I'm coming back from work, so bye!

This should be kept inside the Froyo X Red Camera test thread
This should be kept inside the Froyo X Red Camera test thread
Read that thread and follow the instructions there.
If you cant solve it with those instructions your are much more likely to get an answer from someone with experience with the build or even the creator of the build. Any complaint of a crash or nonstart should come hand in hand with a log.
Search.
Read.
Write.(If this related to an existing thread then ask there)

magfal said:
This should be kept inside the Froyo X Red Camera test thread
Read that thread and follow the instructions there.
If you cant solve it with those instructions your are much more likely to get an answer from someone with experience with the build or even the creator of the build. Any complaint of a crash or nonstart should come hand in hand with a log.
Search.
Read.
Write.(If this related to an existing thread then ask there)
Click to expand...
Click to collapse
u have 9 posts dont tell me what to do. lol
well seriously thanks for the advice

Follow this guide to the letter
http://forum.xda-developers.com/showthread.php?t=959831
I have run x red setup exactly as this thread said and have had no problems whatsoever for the last few days.
I would also suggest flashing one of the newer roms like this one.
http://forum.xda-developers.com/showthread.php?t=616294
Try running this combo for at least an hour before trying to add new apps so we can exclude as many possible sources of failiure

hey there
followed the instructions... managed to run haret on my blackstone however it just can reboot to the froyo... changed the startup.tx file but to no avail.. any help?

Wait a bit will upload the files i am using
Did you unpack all the files at the root of your memorycard (not in a folder)?
If so i will upload an allready set up dump of my system that you can try.

magfal said:
Did you unpack all the files at the root of your memorycard (not in a folder)?
If so i will upload an allready set up dump of my system that you can try.
Click to expand...
Click to collapse
problem solved i replaced my froyo user config with the gingerbread.userconfig
also in airplane mode

[ROM] RusMod 1.19

RusMod 1.19.
Added:
CBW kernel and some build.prop changes.
This is mod for russian users(was so.. unitl now)
Now i wish to give it to you.
About it:
Well, i can copy page from Khal's rom and say - it all there.
If we get something here, that gets to RusMod.
It's fully stock(i hope so, cause we have so many changes... =))
How to install it:
If your rom based on Dexter rom than there is a chance that you will only need
wipe cache and dalvik-cache.
If not - you should wipe all data.
After restoring rom from nandroid apply patch, because russian version of settings.apk and phone.apk have some changes for russian users.
Well, that's all.. i think =)
Credits:
Dexter
xavwanted's
Mioze7Ae
khalpowers
And everyone else who make people happy =)
Links:
RusMod 1.19
RmEnPatch
BTW: i recommend to use software from Go Dev Team like Go Launcher Ex, Go SmS Pro and e.t.c. It really good and opensource =)

Much appreciated... will try out shortly
Btw, is there gingerbread theme for this ROM? If so, where can I get it? Thx

Nope, gingerbread theme not there.
After framework upgrade in RM 1.16 themes are in reworking.

Okay install success... gonna test out for a bit and see how it is. Btw you have lightXt pre-installed over this: https://market.android.com/details?id=com.coreaaosi.afroid&feature=search_result which has more features, better look and a widget... (and doesn't require root)
Also, I switched language to English but there's something in my notification bar as ongoing but I have no idea what it is. That's in russian and it has an American flag next to it in the status bar and clicking on it takes me to some settings that's also Russian... any idea what that is?

syrenz said:
Okay install success... gonna test out for a bit and see how it is. Btw you have lightXt pre-installed over this: https://market.android.com/details?id=com.coreaaosi.afroid&feature=search_result which has more features, better look and a widget... (and doesn't require root)
Click to expand...
Click to collapse
Will see, thanks.
Also, I switched language to English but there's something in my notification bar as ongoing but I have no idea what it is. That's in russian and it has an American flag next to it in the status bar and clicking on it takes me to some settings that's also Russian... any idea what that is?
Click to expand...
Click to collapse
That ruKeyboard.apk, russian keyboard.
Just delete it and install your preffered keyboard.

fjfalcon said:
That ruKeyboard.apk, russian keyboard.
Just delete it and install your preffered keyboard.
Click to expand...
Click to collapse
Yep, that seems to have done it. Thx

Some themes for rusmod:
http://4pda.ru/forum/index.php?showtopic=182489&st=4920#entry7763361
http://4pda.ru/forum/index.php?showtopic=182489&st=2500#entry6954799
But they are for 1.15 version framework.. will wait until theme makers update it +)

Hi I thing this is a great no problems but one poor wifi receiving but everything else is great Russian launge not a problem.give it a try its really sharp.
Sent from my XT720 using XDA Premium App

fjfalcon said:
Some themes for rusmod:
http://4pda.ru/forum/index.php?showtopic=182489&st=4920#entry7763361
http://4pda.ru/forum/index.php?showtopic=182489&st=2500#entry6954799
But they are for 1.15 version framework.. will wait until theme makers update it +)
Click to expand...
Click to collapse
Did anyone make a stock gingerbread one (even if it's not updated yet)? I want to try out that clean gingerbread look...
Anyways, thanks for the ROM, everything looks to be working perfectly right now

syrenz said:
Did anyone make a stock gingerbread one (even if it's not updated yet)?
Click to expand...
Click to collapse
AFAIK no
The gingerbread theme already in the theme section here wouldn't work with this ROM, correct?
Click to expand...
Click to collapse
Well, i'am sorry but i don't like themes... i mean mine phone should be look like stock.. so i never check it. But if it based on metamorth.. why not?
Anyways, thanks for the ROM, everything looks to be working perfectly right now
Click to expand...
Click to collapse
A sing on my ears =)
mchlbenner said:
Hi I thing this is a great no problems but one poor wifi receiving
Click to expand...
Click to collapse
Well, that strange, i have no problems with it at all.. tiwlan m.b.?
Try to use it from Dexter rom... or check Access Point.

fjfalcon said:
Well, i'am sorry but i don't like themes... i mean mine phone should be look like stock.. so i never check it.
Click to expand...
Click to collapse
Yeah, I agree with you for the most part regarding themes, but I consider gingerbread stock actually lol.
But if it based on metamorth.. why not?
Click to expand...
Click to collapse
Yeah... I'll have to figure out how to do metamorph since I've never done that yet. (That's why I edited my post lol)

syrenz said:
Did anyone make a stock gingerbread one (even if it's not updated yet)? I want to try out that clean gingerbread look...
Click to expand...
Click to collapse
fjfalcon said:
Well, i'am sorry but i don't like themes... i mean mine phone should be look like stock.. so i never check it. But if it based on metamorth.. why not?
Click to expand...
Click to collapse
As long as the framework-res folder structure matches Moize7Ae's MM patch it should work. You could also try ZipThemer.

3rdstring said:
As long as the framework-res folder structure matches Moize7Ae's MM patch it should work.
Click to expand...
Click to collapse
RM uses Mioze7Ae's MM patch so it should work =)
Afaik there is some program with name metamorth.. it's changes phone theme...

Metamorph works "live" on the phone & when it themes framework-res it will reboot the phone & with owq's morph I think you have to run through MM a second time to get the white clock color. ZipThemer takes the morph & builds an update.zip (& an undo.zip for when things go wrong). So you create the update.zip (I use HTC Edify Generic update script setting) make sure it is in the openrecovery/updates folder, boot into OC & apply the update.

hows battery on rusmod

I have 48 hours easy.
But me it's me...
As far i can say my battery most living.. don't know why.
Some people say its don't drain power at all... some says that battery goes with 7 hours...
So just try and say =)

screenshots
Hi fjfalcon,
thanks for your work, I wanna give a try to this Rom do you have any screenshot of it? Does it have your swap kernel? ))
And also...what tweaks did you use to improve battery life and performance of your phone? Thanks!

fjfalcon said:
I have 48 hours easy.
But me it's me...
As far i can say my battery most living.. don't know why.
Some people say its don't drain power at all... some says that battery goes with 7 hours...
So just try and say =)
Click to expand...
Click to collapse
Hy fifalcon....
Wanna give a smale Replay to this Rom ....
Man you Rock....thats the best Froyo-Rom i tried on my Phone....and i tried all....
Here are some things....
- It´s a Stock,Clean,Fast,Stabil and MULTI-LANGUAGE Froyo so every Body can give it a try
- For Multi-Lang i Installed Rusmodv1.17+RmEnPatch+Ginger_Original_Glass-signed Keyboard
- I´m using Launcher Pro,Move2SD enabler and thats it.....no Swap....One Partition on SD.....i moved only my Games to SD with nativ app2sd....
- Batterie Live 48h+
- Ram 50MB+
- Internal Storage 170MB....with some Apps and Games 140MB....
Thanks.....

Thanks for good word =)
So here some themes for 1.17:
http://4pda.ru/forum/index.php?showtopic=182489&view=findpost&p=7879598
http://4pda.ru/forum/index.php?showtopic=182489&view=findpost&p=7875990
xt720.ru server have new ip. DNS update will be in 24 hours.
Access by ip

Hello fjfalcon,
Can you please tell us what are the advantages of this rom over stock 2.1 or miui?
Will it increase free RAM, rom space, snappiness ? Any disadvantages over the stock roms? Is the haptic feedback as strong as the original stock rom?

[rom]cm9-motorioxt720-2.5.28-beta update.

This rom is base on milestone on xda . You can view the thread about CM9.
work:
phone
sms
camera
not work:
fm
...
I NEED HELP : THIS ROM CANT OVERCLOCK BY ADD INT.D if add int.d when setting-processor the phone will be reboot. i dont why ?
http://kuai.xunlei.com/d/CNFKEGTGFIRH

Help on the download link.

napnau said:
Help on the download link.
Click to expand...
Click to collapse
Just click the text "cm9..." and give us feedback.........

B_e_n said:
Just click the text "cm9..." and give us feedback.........
Click to expand...
Click to collapse
Will it work on our XT720? Thanks for the help man.

lwxddlqkillapp said:
I NEED HELP : THIS ROM CANT OVERCLOCK BY ADD INT.D if add int.d when setting-processor the phone will be reboot. i dont why ?
http://kuai.xunlei.com/d/CSVUYGDTSJBN
Click to expand...
Click to collapse
Which overclock.ko and symsearch.ko are you using? It could be that you have incompatible ones. The Milestone (A853) has the 2.6.32 froyo kernel, but we're stuck with 2.6.29 eclair kernel. In particular symsearch.ko had to be adapted for 2.6.29. The versions on our github have been modified and recompiled for 2.6.29: https://github.com/CyanogenModXT720...sholest/tree/gingerbread/prebuilt/lib/modules (note that overclock.ko requires a working symsearch.ko is loaded first)

I installed it and it is pretty good at the first look. You can install it using the xt720 bootfix, the only thing missing are gapps and i tried installing them after, but it doesnt work for me. Average RAM is about 50-60 M and it runs pretty smooth, hope to see more from you soon
EDIT: After reboot the gapps appeared

Mioze7Ae said:
Which overclock.ko and symsearch.ko are you using? It could be that you have incompatible ones. The Milestone (A853) has the 2.6.32 froyo kernel, but we're stuck with 2.6.29 eclair kernel. In particular symsearch.ko had to be adapted for 2.6.29. The versions on our github have been modified and recompiled for 2.6.29: https://github.com/CyanogenModXT720...sholest/tree/gingerbread/prebuilt/lib/modules (note that overclock.ko requires a working symsearch.ko is loaded first)
Click to expand...
Click to collapse
Thanks Mioze7Ae, I will try it...
But I used the overclock.ko and symsearch.ko are adapted for 2.6.29....

spitcuba said:
I installed it and it is pretty good at the first look. You can install it using the xt720 bootfix, the only thing missing are gapps and i tried installing them after, but it doesnt work for me. Average RAM is about 50-60 M and it runs pretty smooth, hope to see more from you soon
EDIT: After reboot the gapps appeared
Click to expand...
Click to collapse
Thanks
So what is not working???

B_e_n said:
Thanks
So what is not working???
Click to expand...
Click to collapse
Nothing so far. Battery life also seems to be much better than in fj's one. The only thing I found where a random reboot when being in the browser, but I will use it as my daily driver from now on

spitcuba said:
Nothing so far. Battery life also seems to be much better than in fj's one. The only thing I found where a random reboot when being in the browser, but I will use it as my daily driver from now on
Click to expand...
Click to collapse
Are you kidding!!!!!
I have to try it right now!!!!
BTW on which cm9 rom is this base lwxddlqkillapp??????
Can you post a link to the rom thread??????

Hi ben you will need bootfix for your xy720.
Sent from my SGH-T759 using xda premium

mchlbenner said:
Hi ben you will need bootfix for your xy720.
Sent from my SGH-T759 using xda premium
Click to expand...
Click to collapse
Thanks i use it but i m stuck at M logo.......
But my rsd flash don t want to flash so i flash it directly over my old cronos x rom... I will have to try to flash it again at home my work computer often don t want to flash... I don t know why...
Which sbf do you use spitcuba?????

b_e_n said:
thanks i use it but i m stuck at m logo.......
But my rsd flash don t want to flash so i flash it directly over my old cronos x rom... I will have to try to flash it again at home my work computer often don t want to flash... I don t know why...
Which sbf do you use spitcuba?????
Click to expand...
Click to collapse
str_u2_01.1e.0

I can overclock as f.y's rom. Can anyone giv me a bootfix

spitcuba said:
str_u2_01.1e.0
Click to expand...
Click to collapse
It works with STR_U2_04.1E.1 too (i successfully flash it in the end...) I think it will work with all the stock sbf.
If someone can try with the mod one (i have less than 2Mo free in the system rom...)
And i use the first bootfix for motoroi rom (and i clear all before and after the flash)
I had to reinstall gapps cause it can t sync my contact with out it (it only sync gmail and drive)
I had a little chinese everywhere in the beginning but after 2reboot all were gone. The only thing is that the OK is on the right and the cancel is on the left (not a big deal but it surprise at the beginning...)
App2ext works fine; the playstore too; and youtube too
I can t take pics with the camera (it launch it but don t answer after) edit: i try again and it take a picture but fc just after...
edit2:after a few uninstall (dspmanager; gtalk...) i sucess to take a picture in 8Mo (it was long....) and i film in 720p but i can t open it (and when i take the film it was very slow about 1image/s...)
I don t try a lot for the moment but it seems to be a really good one!!!
I think i will try it for the week end...
Thanks a lot lwxddlqkillapp

Hmm... wonder if it supports ext4? trying it now with modsbf...
***Edit*** Guess I used the wrong bootfix...
Nevermind figured it out I think

LibertyMonger said:
Hmm... wonder if it supports ext4? trying it now with modsbf...
***Edit*** Guess I used the wrong bootfix...
Nevermind figured it out I think
Click to expand...
Click to collapse
I don t know i m using ext3 too many issues with ext4 and not a big difference...

B_e_n said:
I don t know i m using ext3 too many issues with ext4 and not a big difference...
Click to expand...
Click to collapse
What issues do you have with ext4? I'm not aware of any maybe that will explain some issues I have had since i always run ext4...

Can someone please link me to the right bootfix?

LibertyMonger said:
Can someone please link me to the right bootfix?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1284017
is that it? Works for me...
Sent from my tf9001 with XDA XD.