Hello,
I have a TD2 with the latest official WM6.5 ROM.
Unfortunately the VolumeUp-key doesn't seem to work anymore. I can not say since when ... after the Update from 6.1 to 6.5 or whatever.
Probably there is just some dirt inside the button.
Has anyone experienced a similar problem and a hint for me ... or a good instruction to do a cleaning with hopefully not destroying the device?
Regards,
ChrischMan
Related
Hey everyone...I'm a total newbie when it comes to PPC phones...so please bare with me..
anyways..I recently bought an O2 Mini S...and I seem to be having some small problems with it..
when you press the "send" button, it should bring you automatically to the phone keypad...however this doenst seem to work all the time (or much at all...) I have to soft reset the machine to actually get it to start working...and then after 10 minutes or so...it doenst work again until i reset again...NONE of the "phone" functions work either when this happens...i cant go to the call history or get to any of those functions...even if I pull up the "programs" screen...and click on the "phone" icon, it still doesnt work...I have no idea how to fix it..
One solution i figured MIGHT work is to reflash the unit...cuz maybe its a software glitch...however I have absolutely NO clue how to reflash this unit...I've been reading around the site for the past 4 hours trying to learn some of this stuff...but as I am retarded when it comes to computers, I am quite confused...
and what would be the best ROM to upgrade/reflash it with??
Also, I find the machine to be extremely laggy...I dont know if its just mine...and if its the some other software problems..but its very laggy..
And a third thing...I dont know aout other branded HTC Wizards...but for the O2 Mini S, I have this Icon menu going down the left side of the screen...does anyone know how to get rid of it?
If anyone can PLEASE give me a hand...I would greatly appreciate it.
Thanks in advance...
It sounds like theres summat wrong with the ROM, also i think you might be running an old ROM too.
I'd suggest downloading the new ROM from www.my-xda.com and flash it with that, it works great on mine.
If your not running an older ROM then do a hard-reset and re-install, but reset before the O2 custom install stuff gets the chance to install.
P.S. hard reset by pressing the Voice record button + Comms manager button then tap the reset, but keep hold of the other 2 buttons untill you see the message on screen.
Hey thanks for the quick reply..
Just checked teh ROM version...some oldschool stuff compared to what you have listed
ROM Version 1.5.4.2 WWE
ROM date: 11-8-05
Radio version: 01.09.10
Protocol Version: 4.0.13.20
ExtROM Version: 1.5.4.102
I'm guessing this is a lot older than the new stuff...
Anywyas..I tried to dowlonad the newest software updates off the O2 site but its not allowing me cuz i cant provide a proper phone number...ive tried guessing some phone numbers but no dice...any help there?
Also, would it be necessary to reflash the entire device to get rid of possible bugs in the OS? or would a simple software upgrade such as downloading off teh O2 site work?
Danny, how do you find the O2 software? have you tried other ROM's such as those for the Qtek 9100 or Imate K-jam??
Any help on downloading the appropriate files and maybe a link or details about how to actually update the machine would be great.
Thanks in advance again
Oh btw...what do you mean by "
but reset before the O2 custom install stuff gets the chance to install. "?
FIGURED IT OUT!!
shweeeeeeeeeeeeeeeeeeeeeeeeeeet!!
LOVE YOU DANNY B!!
lol
jk
but yeah...i got a UK number from my buddy whos from the UK...downloaded the stuff..updated it...and the thing works flawlessly now...oh man...and it seems to be running a lot faster...much less lag...
lifesaver!!!
After recently upgrading from windows mobile 5 to windows mobile 6.1, none of the keys or buttons work!!
The touch screen and all other functions of the PDA work fine accept the keys, buttons.
Can anyone possibly know why or what may be wrong?
kanej2006 said:
After recently upgrading from windows mobile 5 to windows mobile 6.1, none of the keys or buttons work!!
The touch screen and all other functions of the PDA work fine accept the keys, buttons.
Can anyone possibly know why or what may be wrong?
Click to expand...
Click to collapse
have you try to hardreset or even reflash your device again? btw. what ROM are you having now?
Fixed it!
The problem was the new rom, I used the Ranjus rom, 6.1 and this caused my buttons and keyboard not to work at all!!
I then downloaded WM6.1 ROM by PDAVIET 2.61.24, which is MUCH better than Ranjus one, keyboard, keys and all work perfect!
In deep trouble...
kanej2006 said:
The problem was the new rom, I used the Ranjus rom, 6.1 and this caused my buttons and keyboard not to work at all!!
I then downloaded WM6.1 ROM by PDAVIET 2.61.24, which is MUCH better than Ranjus one, keyboard, keys and all work perfect!
Click to expand...
Click to collapse
Hi Kanej,
I am having exactly the same problem...please can you guide me ...i upgraded my o2 XDA Exec from WM5 to WM6.1 (Ranju's one) and my keyboard stopped working. I even upgraded to Frank's one but still the keyboard does not work....please can you send me the link to the ROM you installed...and instruction how to install it please ...i am stuck with a hopeless situation....thanks for you note ...again if it is some rar files then please tell me how to run the rar files as well.
Sorry to be a pain, i hope you can understand i am an amature to this...
Regards,
Sid.
Success finally.
Hi Kanej,
Thanks for you advise i have now upgraded and the ROM is working wonders....must admit...after attempting all day to revive from the horrors of what Ranju's ROM did to my weekend..no offence...but keyboard...not working completely would mean we have to buy a new device as simple as that...god what a relief...things are working as a starter...will explore the features over the period of time.
Thanks to all the gurus of the field who have assisted and responded to my conserns...hats off to the cookers....
Regards,
Sid.
I have upgrade my P3650 - its a pola100 - from the original rom to another with wm6.1.
it works great. no problem but after a week the touch screen started to work bad. when i wrote a sms i had to press the screen harder. a few days later. the screen not respond perfectly. and now it dosnt work.
i think that it was death. i reset it but i cant config the os. i touch the screen very sofly and the screen respond but i cant calibrate. i cant use it i´m getting seek!!. sorry for my english i speak spanish. please if anyone understund please respond.
Try flash the original ROM, if you can.
Do a hard reset as described here http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset_en.html
To make sure you get the best help possible better to say which 6.1 rom you installed
I had the same problem. When i uprgraded to 6.1 screen was harder to press. When pressing number one, two was picked. After a while this became worse. Eventualy screen was not responding anymore. Sent it out for repair, back in one week. Now no more problems, fix was within warranty, so no cost. Now new screen
the rom i installed is m-amine 2.0
the rom i installed is m-amine 2.0
....
the service tell you what happend?
i see
rspillo said:
Try flash the original ROM, if you can.
Click to expand...
Click to collapse
}i would like to try the original rom.} any of you know where could i find it .
HTC Touch Cruise P3650 (HTC Polaris 100) ...
Look here, there are some official ROM:
http://forum.xda-developers.com/showthread.php?t=373233
since a few days, i can't load my P3600. i flash with several rom without result. i alos try splexploit and others tools. i need your advice about the way i can solve that problems
thanks
Your pcc maybe breaked !!! test orginal rom on www.htc.com
Hi Guy ... I had the same problem , and tried many ROM and also the Original Rom From HTC .... so far it works ,,, but i lost the GPS functionality ,... so i wanted to get the Wm6.1 or 6.5 ....
and i discovered one thing makes it works without stopping on boot ,,,
if i twisted the device and boot it from the button ,,, it works fine and stable for many days ,,, so i think it maybe breakage on the circuit board ,,, but i tried many times and it works,.,,,
now aday i m using wm6.1 from Thailand .... PDA MOBIZ ..very fast and stable
Try it ,,,,
i canceled the idea of buying anew PDA
it s working fine
Thanks
Egypt
Hi Guy,
can you explain your solution? how to apply it. i am not an english speaking native so if you can explain it step by step
thanks in advance
Hi all!
My Diamond is on [v5]PDACornerIllusion 21042, I installed it and all's working great! Still there's one little problem... I can't activate the bluetooth, I don't know why, I click on the activation button and it tells me to wait but then- nothing, bluetooth never activates... :'( I went to the settings so I could activate it there, but still nothing... I tried it all, hard and soft reset several times but still nothing...
Please, tell me what can I do?? Thanks.
Same Problem here...
Hi just wanna bump this thread...
I'm having this problem too bro...
Have tried the following workarounds/solutions but to no avail:
- Flashed a Stock Rom, works, but flashed back to a custom rom, the problem returns.
- while in custom rom, tried flashing different Radio Roms but still no bluetooth.
- Used MTTY method (See here: http://forum.xda-developers.com/showthread.php?t=540290&highlight=mtty) but still no luck...
- This has been going on for about 2 months or so for me... been trying these methods with different Stock, Custom and Radio Roms. Could manage to get it alive for a short while (3 - 4 soft resets later...) and the darn bluetooth juz wouldn't come ON again...
- Sigh!!!!
Hope somebody out there has a fix or encountered this problem, and explain to me in detail how you remedied the problem. Cos' I'm afraid that I could be doing something wrong (tho i think i explained pretty clearly, did i?) :S
hi bulletproof_78,
have u ever found a solution for this and fixed the problem?
i am also having this problem since i flashed a cooked rom...
tried everything but no luck....
thanks.
i also have a touch diamond p3700 and do not have any problem with my blue tooth
also using a cooked rom. ormet rom wwe wm6.5 standartversion with cookie home tab .
the album and video call doesnt work there is a fix for it .
find herg62123 htcalbumtp2 for the album and x videotelephony diamond swtos for the videocall .the best rom i found for the htc diamond and every thing works try it out . and it really looks good too works for me