Database Users

wizard and chinese input softwares help!

Hello all,
I'm having some problems with the CE-Star suite.. After 2 resets, the chinese text would just become SQUARES and it could only be restored by reinstalling the CE-suite program. Anyone encountered this problem before and can it be resolved? i just installed it and has yet to get it registered, is this the cause?
Previously i installed maction monster chinese and after not being able to use any input or whatsoever of that program, I tried uninstalling it but its always there! how do i get rid of it?! when i run remove programs and clicked on it, it asks me to reset my unit to completely remove it but everytime i resets it its still there! HELP!!
tried using ActiveSync to remove it but still can't!
another problem with my activesync, everytime i sync and when it reaches to sync files, it would tell me that there is a unresolved item. i checked and delete the unresolved file to see if i can bypass it but it seems that every file is unresolved?!
it recomends to restart the computer and phone then sync again and i've been having this problem even after umpteenthed reboots..
any help would be appreciated!
cheers!
Joel

Which version are you using?
I got CE-Star v2.8 Beta 4 installed on my Wizard and it works fine. Chinese characters are properly displayed, some programmes like TMCP are displayed in Chinese now (which I was hoping it wouldn't btw lol) and input with PinYin works as well as drawing with your Stylus on the Touchscreen. Earlier versions of 2.8 didn't work, so give beta4 a try if you haven't yet.

i didn't buy a cestar ver 2.8 beta4. and just use a trial one. but when i wanna change the cestar back to keyboard mode. it was out of order. i don't think it's trail ver problem, it should be a bug. so i will not buy it before the final ver release.
if anyone can support a chinese rom or other way to change eng ver into chi ver, it should be the best news.

Well which Trial version are you using?
btw, it seems that v2.8R1 has been released and it seems to be more stable then the beta4. I haven't give it a try yet, will have to mail the developers about it I guess....

i'm using version 2.8 which is meant for WM5..
the problem is when u soft reset a couple of times then the chinese characters would display as squares.. kinda annoying as it can only be restored with a reinstall..
what about the monster chinese 5 problem? anyone encountered such a problem before? i can't uninstall it as it will ask me to reset the phone to fully uninstall but i have done it dozens of times and its still there, can't get rid of it.
by the way, i unlocked the extended rom and was wondering which of the files are safe to delete? anyone knows? i'm having the MDA vario by t mobile.. i can see that there are heaps of t mobile crap in there but not sure which are crap and which are essential..

There are several releases of v2.8
As I posted earlier, earlier beta releases didn't work, but beta4 did.
And it seems that R1 works fine. So What about give that info about which version you're exactly using? If you recently downloaded it, it should be R1, you might want to give beta4 a try
I have CE-Star running for some time now and had 20+ soft-resets and it's still working fine.
joelsoo said:
i'm using version 2.8 which is meant for WM5..
the problem is when u soft reset a couple of times then the chinese characters would display as squares.. kinda annoying as it can only be restored with a reinstall..
what about the monster chinese 5 problem? anyone encountered such a problem before? i can't uninstall it as it will ask me to reset the phone to fully uninstall but i have done it dozens of times and its still there, can't get rid of it.
by the way, i unlocked the extended rom and was wondering which of the files are safe to delete? anyone knows? i'm having the MDA vario by t mobile.. i can see that there are heaps of t mobile crap in there but not sure which are crap and which are essential..
Click to expand...
Click to collapse

Kage Musha said:
There are several releases of v2.8
As I posted earlier, earlier beta releases didn't work, but beta4 did.
And it seems that R1 works fine. So What about give that info about which version you're exactly using? If you recently downloaded it, it should be R1, you might want to give beta4 a try
I have CE-Star running for some time now and had 20+ soft-resets and it's still working fine.
thank you very much for your reply kage..
i just tried downloading the ce star again.. its still downloading now so i'm gonna have a go again with installing it later..
is yours registered or also a trail version?
Click to expand...
Click to collapse

trial...since I'm just testing it right now for viewing Chinese characters and it seemed unstable at first.
Seems only R1 is available for download, if you need beta4 to try, give me a PM

Kage Musha said:
Well which Trial version are you using?
btw, it seems that v2.8R1 has been released and it seems to be more stable then the beta4. I haven't give it a try yet, will have to mail the developers about it I guess....
Click to expand...
Click to collapse
i've tested beta4 beta3 and r1 as well, but as the results are b3 can't let me input anything except english, b4 can input once but after changing input mode it's dead. r1(from offical website) is same as b4. now i met one more problem is after i uninstall b4 and soft reset machine, the sms function lost. i can only hard reset machine. faint...... so the chinese rom looks like very important

Just wonder know, why not Maction Monster Chinese ? The v5.1 released and it work great with my kjam.

shentan said:
i've tested beta4 beta3 and r1 as well, but as the results are b3 can't let me input anything except english, b4 can input once but after changing input mode it's dead. r1(from offical website) is same as b4. now i met one more problem is after i uninstall b4 and soft reset machine, the sms function lost. i can only hard reset machine. faint...... so the chinese rom looks like very important
Click to expand...
Click to collapse
That's rather strange indeed. I Don't have this problem with beta4.
Although it is slow with switching to CE-Star keyboard :s
As for a Chinese ROM, maybe you should try and look up for the Dopod ROMS, Dopod 838.

I came across problems on Monster Chinese v5.1. I tried to add a speed dial and then in the middle of my input it just suddenly disappeared.
I am using O2 ROM on Dopod 838.
(By the way, Dopod ROM sucks, dont even try it... I tried O2 ROM and then I never want to use the original again)

i installed CE-suit, but how do you activate the input?
it said hotkey is CTRL and Shift, but i don't have CTRL. i tried the dot key, but still won't let me change the input.

So what is the latest stable CEstar for wm6? So many versions going around....and keygen doesnt work....arh....someone pls...

http://forum.xda-developers.com/showthread.php?p=1562212#post1562212

NEW ROM !! PDAMobiz_Dopod_P800W_AKU301_v1.1.1

Best ROM from www.pdamobiz.com in version "lite" and "customized" is here -
ftp://xda:[email protected]

Can you please tell us what is in it? Version, etc.

Is that a more easily
http://www.pdamobiz.com/show_news.asp?NewsID=77719

Is it already on ftp or still uploading?

How does it compare?
Anyone who tries it please tell us how it compares to other roms.

can you load this in P3300 HTC?
I have tried but it says invalid signature, if I unlock it using the imei-check option will it allow me to use it?
Thank you!!!

My phone crash and can boot to Windows
I try this update this version and it cause my phone to crash and now it can't boot to Windows (only to booter !!).
I try to use previse ROM I use to update (depod ROM) and it fail on 2% although I already did that once (I update from CHN to WWE).
Does this utility erase and lock the phone ??
Anybody know who to recover from that crash ?
Thanks.

OK,
I use "ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe" and my phone came to live.

I did the upgrade
I also had the lockup like L.A , but reverted to the dopod rom and run the program a second time. And now I am running the customised ROM
Will evaluate and feed back. Maybe a bit late because I would be on the road a bit

Are you guys using a dopod mobile phone, or another brand? (Original htc, orbit, etc.).
Thanks

CAVADIAS said:
Are you guys using a dopod mobile phone, or another brand? (Original htc, orbit, etc.).
Thanks
Click to expand...
Click to collapse
Mine is originally HTC P3300.
I confirm that the lite edition also works on my phone. I may stick with it because I want the freedom to choose my applications without cluttering my memory. The lite also have audio booster, graphic equaliser, and voice recorder, and media hub.
In addition to these, the customised one has Notem, GSFinder, Sprite backup, reset, BatteryStatus, Card export, and soft key aplet, opera browser, TCPMP, registry editor, etc.
I must be off now.

I understand, you been through the imei-check unlock process, Correct?? Thank you for your reply.
Cheers

CAVADIAS said:
I understand, you been through the imei-check unlock process, Correct?? Thank you for your reply.
Cheers
Click to expand...
Click to collapse
Yes, some time back

i can also confirm that this only works if you have a clean device, ie. you have to HARD RESET the device BEFORE you update with these roms (both lite & customized). (you also have to hard reset after the update)
ps. the also seem to have a third rom on their website, has anybody tried this?
p.p.s it seems that this rom does not allow you to go below the year or 2143 when you try to set the date and time, can somebody please try this on their device to see if they have the same problem.

dragon_soft said:
ps. the also seem to have a third rom on their website, has anybody tried this?
p.p.s it seems that this rom does not allow you to go below the year or 2143 when you try to set the date and time, can somebody please try this on their device to see if they have the same problem.
Click to expand...
Click to collapse
The third ROM comes with some map software but I did not d/l it because I wanted a lean base.
You can set the date to "normal"by going to start>settings>system>regional settings and change from Thai to English (US)
The Dopod ringtones are also posted as a cab file at the same site.
Admins: Since this is not "ship ROM" where does it fit? Will upload later if there is clarification. The PDA Mobiz site is painfully sloooww

Lite and Modified versions on ftp now
I have put them there now.
Tips: The hard reset procedure will not show a "lighted screen" , so hold the buttons a bit longer (i did it for 20-30 seconds ) before releasing them.
When phone is resetting and tells you ".....The cold boot did not complte ......."and you need to press yes, do not be in a hurry Just take some 20 seconds before clicking on the soft button.
If you get stuck, reflash the shipped rom and try again after the initial settings. (tip above was to hard reset before starting)
Good luck

mvp said:
Best ROM from www.pdamobiz.com in version "lite" and "customized" is here -
ftp://xda:[email protected]
Click to expand...
Click to collapse
hi. in this rom have hungarian rom?
thanks

SVrider said:
hi. in this rom have hungarian rom?
thanks
Click to expand...
Click to collapse
No sir . Maybe it will surface someday

victoradjei said:
No sir . Maybe it will surface someday
Click to expand...
Click to collapse
ok, buit:
this is rom stable? bugfree? official or unofficial?
(sorry bur i am new user )

pls upload on ftp xda PowerMap rom.
Thx

Touch Screen Great problem. help plz!

I have upgrade my P3650 - its a pola100 - from the original rom to another with wm6.1.
it works great. no problem but after a week the touch screen started to work bad. when i wrote a sms i had to press the screen harder. a few days later. the screen not respond perfectly. and now it dosnt work.
i think that it was death. i reset it but i cant config the os. i touch the screen very sofly and the screen respond but i cant calibrate. i cant use it i´m getting seek!!. sorry for my english i speak spanish. please if anyone understund please respond.

Try flash the original ROM, if you can.

Do a hard reset as described here http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset_en.html
To make sure you get the best help possible better to say which 6.1 rom you installed

I had the same problem. When i uprgraded to 6.1 screen was harder to press. When pressing number one, two was picked. After a while this became worse. Eventualy screen was not responding anymore. Sent it out for repair, back in one week. Now no more problems, fix was within warranty, so no cost. Now new screen

the rom i installed is m-amine 2.0
the rom i installed is m-amine 2.0
....
the service tell you what happend?

i see
rspillo said:
Try flash the original ROM, if you can.
Click to expand...
Click to collapse
}i would like to try the original rom.} any of you know where could i find it .
HTC Touch Cruise P3650 (HTC Polaris 100) ...

Look here, there are some official ROM:
http://forum.xda-developers.com/showthread.php?t=373233

Blackberry connect on HTC Touch2

After 2 years using Blackberry connect in my Elf (HTC Touch) now it is time to try it on my new Mega, however there is no way I can get it to work. I have tried all versions from 4.0.0.97 to 4.0.0.106 changing the AKU in the register with no success, PIN pending error always.
I would much appreciate any suggestions.
Best regards

search for taiseer .cab for your solution

where can you download this from ?

I´m trying the same without success.
Did you find the solution?
Vintila said:
After 2 years using Blackberry connect in my Elf (HTC Touch) now it is time to try it on my new Mega, however there is no way I can get it to work. I have tried all versions from 4.0.0.97 to 4.0.0.106 changing the AKU in the register with no success, PIN pending error always.
I would much appreciate any suggestions.
Best regards
Click to expand...
Click to collapse

axel2009 said:
I´m trying the same without success.
Did you find the solution?
Click to expand...
Click to collapse
Not yet.
I have tried several cooked ROMs changing the device ID to Elfin or Rapahel hex-editing the ROM and then changing the AKU with no success.
I am waiting for a cooked ROM with Windows Mobile 6.1 as a last chance.
I will keep this post updated.
Regards

Vintila said:
Not yet.
I have tried several cooked ROMs changing the device ID to Elfin or Rapahel hex-editing the ROM and then changing the AKU with no success.
I am waiting for a cooked ROM with Windows Mobile 6.1 as a last chance.
Regards
Click to expand...
Click to collapse
Would be a bummer to go back to 6.1 wouldn't ? I may also consider this as an option. On the bright side is that with 6.0 I may be able to run BBC2.x instead (with hexed model and coredll) - I am only interested in receiving emails. Anyhow - looks like we are on the similar path of trying to get BBC working on our new devices (HD2 for me).
If you still have your Elf[n] or maybe know Elf comrades with that device - maybe you could check this post and help us out with some info ? TIA

moisha said:
Would be a bummer to go back to 6.1 wouldn't ? I may also consider this as an option. On the bright side is that with 6.0 I may be able to run BBC2.x instead (with hexed model and coredll) - I am only interested in receiving emails. Anyhow - looks like we are on the similar path of trying to get BBC working on our new devices (HD2 for me).
If you still have your Elf[n] or maybe know Elf comrades with that device - maybe you could check this post and help us out with some info ? TIA
Click to expand...
Click to collapse
HI Moisha!
I upgraded my Elfin to 6.5 but I downgraded to 6.1 as I feel more comfortable (I love the stylus!).
Well I have checked the post you point but I prefer the ROM hexediting method as it easier although is not working indeed.
Let's hope someone cook a 6.1 ROM to try.
Regards

Vintila said:
HI Moisha!
I upgraded my Elfin to 6.5 but I downgraded to 6.1 as I feel more comfortable (I love the stylus!).
Click to expand...
Click to collapse
I know what you mean. Selecting the checkboxes is a royal pain in the .... on my HD2 capcitive screen Nevertheless, on my old Kaiser 6.5 works like a charm with the stylus and the finger.

Please please can anyone help
i have been trying for the last three days to find a way of getting bb mesenger on my htc touch 2 with no success,
please if you have the knolage let me know (with step by step guide)
thanks

hheerrsshhyy said:
Please please can anyone help
i have been trying for the last three days to find a way of getting bb mesenger on my htc touch 2 with no success,
please if you have the knolage let me know (with step by step guide)
thanks
Click to expand...
Click to collapse
go check it out.........
http://forum.xda-developers.com/showthread.php?t=593162

hheerrsshhyy said:
Please please can anyone help
i have been trying for the last three days to find a way of getting bb mesenger on my htc touch 2 with no success,
please if you have the knolage let me know (with step by step guide)
thanks
Click to expand...
Click to collapse
Forget it, YOU CAN`T, I ended up changing my Touch2 for a Blackberry Torch, what a nice machine!, I do not regret, I love my Blackberry Torch and I do not miss my Touch2.
Trust me, throw away your Touch2 and get a Blackberry Torch.

[Q] Help please !! I crashed my Mda Pro

Hi all,
sorry about my english.
On my Mda i would installed the sd-version of android .
Before this, i update my radio rom from 1.17 to 1.18.
But during the update/ installation i become an error.
Since that, my Mda show me the bootloader (serial/usb).
No chance, to run the "exit-bootloader" file, because the usb-connection is killed.
I have deinstalled and installed the windows mobile devicemanager, but nothing happend.
My last chance, to activated the hardreset had no function.
A call to HTC linked me to xda-developers.com
So, can someone help me, please ?
Thanx

Schuschi,
Try the advice I posted here. Don't forget, to follow my advice you need to ensure Activesync or Mobile Device centre is configured to NOT connect via USB.
http://forum.xda-developers.com/showpost.php?p=20726654&postcount=5
Regards
Phil

Hi Phil,
thanx for your reply.
My OS is 7 and i've tried your post. On the screen of my MDA i see "USB".
I've deselect "connect via USB" in Windows mobile device centre...the driver for Win 7 was updated.
The problem: there's no usb- option in mtty , which i can select...only com1 and com2.
So i try another cable and test it again.
Regards
Schuschi

I don't think it will be the cable. I had problems using Win 7 and went back to my old XP laptop. Do you have another system you can use or can you load a virtual XP machine? I have never successfully used mtty on a Win 7 machine - sorry!

no prob...
yes, i've a XP on a bootable stick, which i test it now.
I'll let you know about the results.
Thanx so much for the moment.
PS: Did you have experience about android (emulator) on a mda pro ?

Schuschi said:
Did you have experience about android (emulator) on a mda pro ?
Click to expand...
Click to collapse
Yes I did but it was very slow and my XDA Exec vibrated lots and LOTS but I think that is just how the Android build sets itself up on the HTC Universal. I tried it twice and got the same results so went back to VNInt's build of Win 6.1
http://forum.xda-developers.com/showthread.php?t=458296&highlight=vnint
and Homescreen PlusPlus with the clock theme
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm

Hi Phil,
my Mda is alived...it was the "wrong" OS.
No probs with XP.
Thank you so much

Glad you got it sorted, what ROM are you now running?

Now i'm using Tomal V12 WM6.5 build 23089, but i'm looking around to find a "better" rom.
The reason to update my rom was the app "Whatsup", which runs on Androids...

As solved, closed