Unrooted, still see mods even after factory reset - Vibrant General

I unrooted and factory reset but i can still see some mods installed like Mobile AP. Why is this? How can i get it back to stock without anything rooted?

mystycs said:
I unrooted and factory reset but i can still see some mods installed like Mobile AP. Why is this? How can i get it back to stock without anything rooted?
Click to expand...
Click to collapse
Did you flash back to stock rom? Hard resets on a custom rom don't get rid of custom settings. You need to flash the stock rom.

Alright so you mean odin? Which is the best one to odin too, i see there are two, or is there another? THe ones i see is
http://forum.xda-developers.com/showthread.php?t=734475
and
http://forum.xda-developers.com/showthread.php?t=739091
i have been reading both theads, which one is better?

mystycs said:
Alright so you mean odin? Which is the best one to odin too, i see there are two, or is there another? THe ones i see is
http://forum.xda-developers.com/showthread.php?t=734475
and
http://forum.xda-developers.com/showthread.php?t=739091
i have been reading both theads, which one is better? I see both use a diff pit file top one uses 513, bottom 512. Which do you recommend?
Click to expand...
Click to collapse
If you want to flash through odin follow the first thread. You could try this thread its a flashable update.zip through clockwork if you still have that installed. It gives root back but is a stock rom. Just unroot again after you are done.
http://forum.xda-developers.com/showthread.php?t=740077

Yea i dont ahve clockwork anymore cause im not on root...

mystycs said:
Yea i dont ahve clockwork anymore cause im not on root...
Click to expand...
Click to collapse
Yeah I just realized that. Odin would be the next step. If you can't use odin reroot, flash the rooted stock rom the unroot again.

Yea im just trying to figure out which stock rom to use there is two..
http://forum.xda-developers.com/showthread.php?t=734475
and
http://forum.xda-developers.com/showthread.php?t=739091
Eugine said he used http://forum.xda-developers.com/showthread.php?t=739091 in his clockwork one so i guess ill use this one.

I use this one for odin and reseting my phone:
http://forum.xda-developers.com/showthread.php?t=734475
I think either one would be fine.

speoples20 said:
I use this one for odin and reseting my phone:
http://forum.xda-developers.com/showthread.php?t=734475
I think either one would be fine.
Click to expand...
Click to collapse
Yea i saw that one. How is the 3g speeds and stuff on it? I read 513 pit is bad, and that one is a pre-release or beta?

Ah it looks like justanothercrowd said its from the same source anyway so i guess it doesnt matter.

What would all of you do if they came up with a sure fire way to know if you have rooted your phone or not. Something that nobody, not even top developers could crack. Then what?

haha well i just odined back I just wanted to try this stuff out never did before

Related

Remove CM7.1

Searched the entire XDA forum and couldn't find a thread like this one (at least one that explains what i want to accomplish). Let's cut to the chase...
CyanogenMod7.1 - i've got it and i used it and i don't like it (don't ask me why, maybe i used touchwiz for too long so i got accustomed to it ), so i want my original kernel and ROM back... And I know exactly which ones to use , got them downloaded right here. The thing is - I'm not sure how to do it. Should i use clockworkmod recovery and flash it? Should i use RomManager? Should i use Odin? Any help from someone who has done would be appreciated.
And also , one more question... Somewhere i found a comment by a guy that says that if i was to flash back original ROM and kernel i would still be stuck with a custom recovery. Can anyone explain that too ?
If by ANY chance a thread like this exists I'm sorry i opened a new one ( I really did search for a long time ). Cheers everyone
Mobile Odin is the future
Sent from my GT-I9100 using Tapatalk
Tricky103 said:
Mobile Odin is the future
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
The desktop version suits me just fine -.-
Hey, im pretty sure your answer has been answered many times before in guides how to flash ROMs.
You haven't stated what ROM you were on previous so i will assume that it was stock.
if you are flashing a full stock ROM use Odin, look at the following thread:
http://forum.xda-developers.com/showthread.php?t=1075278
It has a full guide to which files go where to get back to your stock rom and kernal.
ps. the comment you mentioned, that person might have been referring to a custom ROM, if you chose to flash a custom rom based on stock then you would stay with a custom recovery.
Crucio_ said:
Hey, im pretty sure your answer has been answered many times before in guides how to flash ROMs.
You haven't stated what ROM you were on previous so i will assume that it was stock.
if you are flashing a full stock ROM use Odin, look at the following thread:
http://forum.xda-developers.com/showthread.php?t=1075278
It has a full guide to which files go where to get back to your stock rom and kernal.
ps. the comment you mentioned, that person might have been referring to a custom ROM, if you chose to flash a custom rom based on stock then you would stay with a custom recovery.
Click to expand...
Click to collapse
Thanks for the reply, I know about intratech's thread , that's where i downloaded my stock from. The thing is I wasn't sure which way to do it. I read more about recovery last night and i found out that on sgsII it is linked to the rom, so basically when i flash a stock rom and a stock kernel using odin i would get the normal - default recovery partition? Should I wipe data/cache before flashing back the stock ?
gr4ndm4st3r_bl4ck said:
Thanks for the reply, I know about intratech's thread , that's where i downloaded my stock from. The thing is I wasn't sure which way to do it. I read more about recovery last night and i found out that on sgsII it is linked to the rom, so basically when i flash a stock rom and a stock kernel using odin i would get the normal - default recovery partition? Should I wipe data/cache before flashing back the stock ?
Click to expand...
Click to collapse
If you downloaded from Intratechs post you will get a stock rom with a stock kernel, this will give you a default recovery. All of the downloads there are 100% samsung so there wont be anything modded or changed.
You wont have to wipe data/cache before you do it as when flashing via odin you will be putting your phone in to download mode and odin will do the rest.
Just make sure to read the guide in Intratechs thread to the letter.
My advise to you for the future is to read up completly before flashing something just so you arent stuck with something you dont like on your phone.
Crucio_ said:
If you downloaded from Intratechs post you will get a stock rom with a stock kernel, this will give you a default recovery. All of the downloads there are 100% samsung so there wont be anything modded or changed.
You wont have to wipe data/cache before you do it as when flashing via odin you will be putting your phone in to download mode and odin will do the rest.
Just make sure to read the guide in Intratechs thread to the letter.
My advise to you for the future is to read up completly before flashing something just so you arent stuck with something you dont like on your phone.
Click to expand...
Click to collapse
Flashed it and all is fine now... Altough i did get an infinite boot loop so i had to wipe data/cache anyway for the phone to boot properly... So I guess it wouldn't hurt to do it before flashing stock... Btw i knew what i was flashing , i wanted to try it out... Ty for the reply

[Q] I want to install ROMs too

I bought my phone after MF3 was released. I know i can't go back to MD5 but is there any chance or way i don't know? I really want to install those cool theme with performance improved ROMs. Is it possible to unlock MF3 someday? And one more question. Is MF3 Odin flashable stock released?
ryujeff said:
I bought my phone after MF3 was released. I know i can't go back to MD5 but is there any chance or way i don't know? I really want to install those cool theme with performance improved ROMs. Is it possible to unlock MF3 someday? And one more question. Is MF3 Odin flashable stock released?
Click to expand...
Click to collapse
Right now the only option to install other roms on MF3 is safestrap... read those topics..
ryujeff said:
I bought my phone after MF3 was released. I know i can't go back to MD5 but is there any chance or way i don't know? I really want to install those cool theme with performance improved ROMs. Is it possible to unlock MF3 someday? And one more question. Is MF3 Odin flashable stock released?
Click to expand...
Click to collapse
I'm sure MF3 will be unlocked eventually, but for now use Safestrap to flash your device. Make sure you follow the steps carefully or you could end up bricking it. As for Odin, I don't believe so. Samsung Kies it self isn't even updated yet for the MF3 Kernel support; it doesn't even recognize it for emergency restores.
I'm so scared about getting hard bricked again. i sent for JTAG before and they took 60 bucks for repair. i will wait untill MF3 stock comes out for Odin.
I just installed safestrp on mine less than 10 minutes ago, it worked like a charm. The instructions are pretty easy as long as you pay attention to what you are doing its a snap
ryujeff said:
I'm so scared about getting hard bricked again. i sent for JTAG before and they took 60 bucks for repair. i will wait untill MF3 stock comes out for Odin.
Click to expand...
Click to collapse
Safestrap WILL NOT brick your phone as it does not touch the MF3 and makes a whole nother partition instead, also bestbuy can unbrick your phone free.
Still be careful cause people are not following instructions in that thread either and are flashing over there stock rom slot.it can be done just dont do it.i use Safestrap and MDOB rom and works like it did before I chose to take the MF3 update.so easy
Sent from my SAMSUNG-SGH-I337 using xda premium
Drake9897 said:
Safestrap WILL NOT brick your phone as it does not touch the MF3 and makes a whole nother partition instead, also bestbuy can unbrick your phone free.
Click to expand...
Click to collapse
I've seen a couple people brick their phones already with safestrap because they didn't read and flashed a rom on top of their stock rom. but yes, safestrap itself can't brick your phone

i messed up bid time

so I have been on vision x rom for last couple months. I had a guy flash the stock rom back on my phone and now I have an att update aprox 359mb ready to install BUT I cannot update it. after update completes it boots into twrp. how can I uninstall twrp or is it something I missing. thanks for your help in advance. NOOB here
Do you know what firmware you're on? I don't what stock rom the guy flashed but it must not have been the stock firmware or you wouldn't have twrp.
jd1639 said:
do you know what firmware you're on? I don't what stock rom the guy flashed but it must not have been the stock firmware or you wouldn't have twrp.
Click to expand...
Click to collapse
it shows 4.2.2
JSUMNERS said:
it shows 4.2.2
Click to expand...
Click to collapse
Are you on MDB/MDL or MF3?
Edit: must be MDB/MDL if you still have custom recovery?
JSUMNERS said:
it shows 4.2.2
Click to expand...
Click to collapse
What are the last three characters on your base band
rayburne said:
are you on mdb/mdl or mf3?
Edit: Must be mdb/mdl if you still have custom recovery?
Click to expand...
Click to collapse
im sorry im noob to the 10th......baseband version 1337ucuamdb
JSUMNERS said:
im sorry im noob to the 10th......baseband version 1337ucuamdb
Click to expand...
Click to collapse
Your are on mdb firmware. If flashing custom roms is important to you what I would do is use Odin to upgrade you to mdl firmware. That is probably the same firmware that you have the update for based on its small size. If you use Odin you will lose root and twrp. But you'll be able to put those back on.
jd1639 said:
your are on mdb firmware. If flashing custom roms is important to you what i would do is use odin to upgrade you to mdl firmware. That is probably the same firmware that you have the update for based on its small size. If you use odin you will lose root and twrp. But you'll be able to put those back on.
Click to expand...
Click to collapse
what im trying to attempt is to totally get back to stock everything with no root. I would like to get the update from july which is avail for me and then get the ota for 4.3 in november.... Totally stock. Is this possible ?
JSUMNERS said:
what im trying to attempt is to totally get back to stock everything with no root. I would like to get the update from july which is avail for me and then get the ota for 4.3 in november.... Totally stock. Is this possible ?
Click to expand...
Click to collapse
Yes, by flashing the mdl firmware in Odin
Thanks you very much. Now time to download odin and do research on xda forums.... Wish me luck
JSUMNERS said:
Thanks you very much. Now time to download odin and do research on xda forums.... Wish me luck
Click to expand...
Click to collapse
If you run into problems just ask. The firmware you can get from sammobile.com. You have to register but it's free.
JSUMNERS said:
what im trying to attempt is to totally get back to stock everything with no root. I would like to get the update from july which is avail for me and then get the ota for 4.3 in november.... Totally stock. Is this possible ?
Click to expand...
Click to collapse
Are you sure you want to take that update (I'm assuming it's the MF3 update)?
If you do, you will be limited to using safestrap and the custom roms you can flash in the future.
If you stay at MDL, you can still install a custom 4.3 rom (or the stock 4.3 release without bootloaders once it's available).
You can even install stock MF3 without the bootloaders from the dev section to get the update.
If you want to have an unlocked bootloader and have complete freedom to flash whatever you want on your phone, you only want to update to MDL as mentioned above and not take the MF3 update.
Once your at official OTA MF3, your bootloader is locked and there is no turning back (just trying to help and make sure you are aware of what happens if you take the OTA and upgrade to MF3).
Good Luck
JSUMNERS said:
so I have been on vision x rom for last couple months. I had a guy flash the stock rom back on my phone and now I have an att update aprox 359mb ready to install BUT I cannot update it. after update completes it boots into twrp. how can I uninstall twrp or is it something I missing. thanks for your help in advance. NOOB here
Click to expand...
Click to collapse
Heimdall is your friend , safer than Odin. http://forum.xda-developers.com/showthread.php?t=2374441&highlight=heimdall
jakew02 said:
heimdall is your friend , safer than odin. http://forum.xda-developers.com/showthread.php?t=2374441&highlight=heimdall
Click to expand...
Click to collapse
ok so i havent unrooted yet. Still researching. My problem is now that when i power the phone on it shows custom with the open pad lock. But but when i run root checker basic is says im not rooted. Im confused and need help please. Sorry for being so ignorant but im learning
Sorry again but im still confused as to why it still has pad lock on start up but root checker says no root. I am so stupid im sorry but i need help please
JSUMNERS said:
Sorry again but im still confused as to why it still has pad lock on start up but root checker says no root. I am so stupid im sorry but i need help please
Click to expand...
Click to collapse
Go get Triangle Away. That helped me get rid of the pad lock.
---------- Post added at 09:48 PM ---------- Previous post was at 09:43 PM ----------
risensunx said:
Go get Triangle Away. That helped me get rid of the pad lock.
Click to expand...
Click to collapse
Read this thread. http://forum.xda-developers.com/showthread.php?t=2319251

[Q] Factorying reset of stock rom with Safe Strap

Ok, I have read the couple treads on this, but want to make dang sure before I do this i'm doing the right thing.... I have a 4.2.2 phone, loaders are locked. I have safe strap 3.65, My factory rom has gotten so cluttered up, it crashes all the time. I need to factory reset it. How can I do that without killing my phone?
I think I have to uninstall safestrap.. but thats it... but I'm not 100% sure.
Thanks.
klloyd said:
Ok, I have read the couple treads on this, but want to make dang sure before I do this i'm doing the right thing.... I have a 4.2.2 phone, loaders are locked. I have safe strap 3.65, My factory rom has gotten so cluttered up, it crashes all the time. I need to factory reset it. How can I do that without killing my phone?
I think I have to uninstall safestrap.. but thats it... but I'm not 100% sure.
Thanks.
Click to expand...
Click to collapse
What is build of your factory rom? I'm asking because there dirrend threads with different stock builds so you can flash by Odin correct one.
Swype from Note 10.1
norbarb said:
What is build of your factory rom? I'm asking because there dirrend threads with different stock builds so you can flash by Odin correct one.
Swype from Note 10.1
Click to expand...
Click to collapse
I'm pretty sure I cant odin back, as its MFD, with MF3 baseband. Odin = brick I think. I could easily be wrong... I'm goin swap this thing off for something I can flash anything I want to.
Even with a locked boot loader, you can flash the stock firmware. You can flash the current version or newer one. Its only that you cannot downgrade.
http://forum.xda-developers.com/showthread.php?t=2616221 has link to the newer firmwares.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
klloyd said:
I'm pretty sure I cant odin back, as its MFD, with MF3 baseband. Odin = brick I think. I could easily be wrong... I'm goin swap this thing off for something I can flash anything I want to.
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?p=46943588
Swiping from dark side of Galaxy S5.

Questions about nc2... nc4

Just got my note 3 yesterday and I am no stranger to rooting, roms and everything in between. However I've never owned a Samsung phone before either so I need some help. I've been reading through the forums but things are still a bit fuzzy. I am assuming my phone is on nc4 according to what my settings say. 4.4.2. I rooted using towel root and such is up and running. Safe strap installed. I have also downloaded Odin and a stock 4.4.2 system image file for a restore if need be. Now do I need to flash a nc2 kernel before I flash any roms? How is that done? And my model is smn900v. Which is OK to flash miui for smn900 models right? V just meaning Verizon correct? Thanks for any and all help!
cconcepts said:
Just got my note 3 yesterday and I am no stranger to rooting, roms and everything in between. However I've never owned a Samsung phone before either so I need some help. I've been reading through the forums but things are still a bit fuzzy. I am assuming my phone is on nc4 according to what my settings say. 4.4.2. I rooted using towel root and such is up and running. Safe strap installed. I have also downloaded Odin and a stock 4.4.2 system image file for a restore if need be. Now do I need to flash a nc2 kernel before I flash any roms? How is that done? And my model is smn900v. Which is OK to flash miui for smn900 models right? V just meaning Verizon correct? Thanks for any and all help!
Click to expand...
Click to collapse
I'm at work now but give me a few hours and I'll give you a detailed answer.
Sent by Darkseid from Apokolips
Thanks man I greatly appreciate it!
cconcepts said:
Thanks man I greatly appreciate it!
Click to expand...
Click to collapse
Okay, I'm assuming you're on NC4 since you used Towelroot. You can flash roms but since the bootloader is locked no CM, AOSP, AOKP or Miui as far as I know. No custom kernels yet either so don't try to run any apps that change the governor or CPU frequencies. It may happen in time but not yet...:fingers-crossed:
Beans has a guide here and roms in this link read the first two posts : http://forum.xda-developers.com/showthread.php?t=2787627
Modems, you're on the NC4 modem but we can change modems even though our bootloader is locked. You flash them in Odin. Put your phone in download mode and flash the modem in the ap slot. Modems can be found here : http://forum.xda-developers.com/showpost.php?p=47400062&postcount=1
You may want to stay on the NC4 modem. I took the NC2 leak from 4.3 and that modem didn't work well for me at all. I'm on NC2 with the NC4 modem. Modems depend on your phone and your location. Some people haven't seen a difference in NC2 vs NC4, some people went all the way back to the MJE modem. It's something you have to try for yourself but if your signal is good then leave it.
You put on safestrap so you're good there. Don't even try clockwork mod or rom manager. Safestrap is cool in the fact that you have rom slots. You can put roms in different slots and switch back and forth with wiping and reflashing. Kinda like dual booting your computer with OS X and bootcamp or Windows and Linux. Right now the rom slots work but people have had battery issues using anything but the stock rom slot so for right now use the stock rom slot and it's like old school flashing, there can be only one for now (Highlander reference). As of right I wouldn't dirty flash anything make sure it's a clean wipe.
Next, the rom you chose to use is pure personal preference, they're all good just make sure you read the OP and browse the threads to get an idea. If you get stuck just post a question. The crowd for the Note 3 has been the most courteous and helpful since I've been on XDA.
Welcome to the funhouse!!!
Thank you again. Any more questions I'll post em here.
cconcepts said:
Thank you again. Any more questions I'll post em here.
Click to expand...
Click to collapse
No problem at all, have fun... ?
Sent by Darkseid from Apokolips
My main concern was bootlooping with flashing roms on nc4. I thought I read that somewhere a few different times.
cconcepts said:
My main concern was bootlooping with flashing roms on nc4. I thought I read that somewhere a few different times.
Click to expand...
Click to collapse
You should be fine, alot of the bootloops come from being on Nc2 and hitting reboot to recovery on the power menu. There's a fix for it but I just haven't done it yet. If safestrap is on and working properly just reboot your phone and wait for the safestrap screen and hit the recovery button. If you bootloop hitting reboot to recovery just pull the battery. Reboot to download mode and reboot to system from there.
Sent by Darkseid from Apokolips
I was told on beans thread I need to flash the nc2 kernel before any roms. Now I'm getting confused. Lol
Just tried biggins rom in slot 1 after making a backup and it hung after Safe strap boot screen. Had to pull battery and switch back to stock slot and reboot. Something isn't right....
cconcepts said:
Just tried biggins rom in slot 1 after making a backup and it hung after Safe strap boot screen. Had to pull battery and switch back to stock slot and reboot. Something isn't right....
Click to expand...
Click to collapse
Did you use the nc2 firmware package in his OP? Also in reading his Op he says flash it in the stock rom slot. Even though Hashcode has working rom slots I still think they're not functioning like they should.
Sent by Darkseid from Apokolips
thegamerdarkseid said:
Did you use the nc2 firmware package in his OP? Also in reading his Op he says flash it in the stock rom slot. Even though Hashcode has working rom slots I still think they're not functioning like they should.
Sent by Darkseid from Apokolips
Click to expand...
Click to collapse
I figured I didn't need the nc2 firmware. That's what I was wondering about. If I need to flash that after flashing roms.
Never mind I feel like an idiot. ..lol I didn't dl the rom through his post but from another site and it said nothing about nc2 firmware. Lol I just read his post......
cconcepts said:
Never mind I feel like an idiot. ..lol I didn't dl the rom through his post but from another site and it said nothing about nc2 firmware. Lol I just read his post......
Click to expand...
Click to collapse
It happens, at least it was just a boot problem and not a brick. To be on the safe side always download from the thread... ?. Plus he said try the stock slot instead of slot 1.
Sent by Darkseid from Apokolips

Categories

Resources