Database Users

All Bluetooth device Mic's dead

I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its speaker works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?

CJSnet said:
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its output works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
Click to expand...
Click to collapse
I do have exactly the same problem. After flashing XDA Mobile 6 Release 3, microphone has worked for couple of days, and then suddenly died. Interesting, microphone is working with Notes but not with phone. I went back to
XDA Mobile 6 Release 2 for some other reasons (read: 2MB more free memory for critical application) but the problem with Bluetooth microphone remains. Radio is 2.25. Any advice?
--
Pogo

There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is sometimes temporarily resolved for a short time. It always comes back though

I have been asked to join this thread. Per a PM:
We love the ROM you have provided, and are very thankful, however it was not until installing it that this issue arose. It does not seem fair to leave a number of people with a phone that is unusable for 'phone calls'.
Click to expand...
Click to collapse
(Bolding added by me)
I don't know what to tell you. If the rom doesn't work for you, then don't use it... Don't tell me its "not fair". I use MS Voice Command, and XM6r3 and have never seen this issue with my Bluetooth headset (Jawbone). I've also tested this out with a Plantronics Explorer 210 headset that I have and it has not problems with XM6r3 either. My A2DP headset (Spider) also works fine on XM6r3 with MS VC. I've stated this in the past when people have said they have BT issues on my rom. Sorry, but I can't reproduce it, so its hard for me to fix something that isn't broken for me.
Try this... Do a hardreset on your device (take a backup first if you want), then leave it as the base rom with NOTHING extra added. Run that way for a few days (how ever long it has taken before) and see if the problem happens again. If it doesn't then its not my rom but something being added to it (probably screwing with the registry someplace). If it does happen, then as I've stated before, I've seen a number of BT devices be flakey on WM6 (especially car kits). Try a different rom then. If someone with the problem can pin it down, I'll be happy to do what it takes to fix this issue if its something in the rom that is causing it.

Thanks mfrazz. What wasn't fair was not the bug, but that you had not responded to previous mentions of it, i.e. not fair to leave us with it. We love the ROM and put a lot of our life in your hands in a way, as we rely on our device so much for work and play. Hope you understand.
Now then, I have already tried a hard reset and the problem never occurs, until WM6 is put back on. Sure, 'use another ROM' is all very well, but we love yours - again, hope you appreciate the sentiment. If you're in a relationship, are you the kind of guy who tells a girl who loves you, 'find another boyfriend', or do you try to make it work
SO, I am wondering if this is related to the glitch you mention where sometimes when switching out of vibrate mode, the ring tone becomes muted. For that, your solution is to play the ringtone again, then it becomes unmuted.
Similarly, our Bluetooth devices mic's are being muted, and if we mute then unmute them again, then they become unmuted. A link that helps point you in the right direction?
Please note, this is not certain bluetooth devices being 'flaky', this is ALL devices. 4 at the latest count, including rock solid Nokia CARK7W car kits and Jabra headsets.
Some people put it down to MS Voice Command, which I have never installed. What does that program do, do you know, to cause the bug? Again I hope that might help point you in the right direction.
Please don't dump us Let's try to fix what is wrong in this relationship

BT problem solved?
CJSnet - not sure if you have resolved this. I was having the same problem and noticed people with reTouched dialer were not, so I loaded that dialer and the problems went away. I am using a Plantronics Voyager 510. Seems the problem might be with the standard dialer.
Hope this helps
CJSnet said:
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is temporarily resolved for a short time. It always comes back though
Click to expand...
Click to collapse

Thanks, I'll give that a try. However WM6 has pretty much finished the Wizard for me, and I'm hoping to get a TyTN II soon as a replacement. Shame.

Bluetooth Problems on X1

Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt

Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated

Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated

I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..

i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?

zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip

Come on people..... please someone help us with this

Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?

MSVC 1.6 notifications - help (Microsoft Voice Commander)

I used to use MSVC 1.6 on the Tytn2 on WM6.5 (see sig) and the confirmation notifications when you called someone always used the bluetooth headset. Since running it on the Leo MSVC seems to use the loudspeaker on the handset instead of the bluetooth headset even though every setting is marked as "Announce notifications using Bluetooth hands free only"
Anyone else having this issue as I did a search and couldn't find anyone.
Edit: Just had it working once but then the other end couldn't hear me when the call connected. Then I tried again and it had reverted back to not working.
I went to Bluetooth settings, Advanced, Audio and ticked the box then rebooted the phone...

I have this same problem! Its annoying... you want to make a call and the prompts/confirmation come from the phone... Please, can someone figure this out?

Bumping thread as it should be resolvable

Starfury said:
Bumping thread as it should be resolvable
Click to expand...
Click to collapse
IT isn't... I have done more research..
The Leo (and the TouchPro2) use a Widcomm BT stack as opposed to the usual MS stack. Sadly, this means the BT won't play nice with a lot of different apps/equipment. This isn't something that can be swapped out easily as NRG has pointed out. Touch Pro 2 users are still facing the same problems even though that phone was released much earlier. Some however have reported some success when using certain custom ROMS... how its working with some ROMS and not others is still a mystery it seems
I would watch the ROM Development thread carefully to see if a ROM what works with our MSVC shows up....

Hello,
Is there a workaround... ?
Thanks in advance for any info,
Jean-Jacques

I have the same problem. I'm using an old phone when I need to use hands-free. After spending a lot of money on my HD2, I'm not impressed.
I there a particular combination of headset and software that does work, especially for voice dialing?

have you tried this?
I would, but I don't know if I even have voice command on my phone.
http://forum.xda-developers.com/showthread.php?t=634494

DrATty said:
I there a particular combination of headset and software that does work, especially for voice dialing?
Click to expand...
Click to collapse
Does not work with my helmet bike with scala-rider Q2, but does with does with Philips SH9000 stereo headset...
Mono/Stereo seems to matter.
Any workaround would be veryyyy appreciated
Jean-Jacques

Workaround
Hi,
for this following workaround seems the only way to get it runnin:
My BT-Headset has the ability to be set as a Stereo-Device. When I establish a connection to this Stereo-Device, I can use it (my BT Headset) to give Commands and recieve "answers" from the VC. In case I want to start a phone-Call, my headset changes the connection automatically from "Stereo-Device" to "Handsfree-Device" and back, after finishing the Call.
This may be the Reason, why someone here already got it running with a BT-Stereo-Headset.?
Sorry for my bad english...

Bluetooth not working right with Pioneer and Android

I've been using Androind on my HTD for +/- the past month or so, and have yet to have stable bluetooth operation through my Pioneer AVH-3200BT which is enabled for BT phone calls (NOT A2DP). I've been through several builds, and currently am using shu8i's latest shubCRAFT 1.4d (23.08.2010 build). I'm got HPSL3 and Radio 2.12.
I get a lot of forced close app errors with trying to establish BT connection. Sometimes I get further, like the Pioneer can usually pick up my contact list after a few tries... But the worst happens when I try to make a phone call. The system hangs, the sound goes dead, the Pioneer cancels the call, and the HTC HD2 usually crashes back to the home screen. From then, I usually dont have any sound for anything until I reboot the HD2.
In WM6.5 Bluetooth works fine with the Pioneer.
Can anyone help me out with this? I'd be willing to pull some logs / demos / or get more vital information if I knew where to look. I'll be the geinea pig!
Thanks in advance

I'll add plantronics voyager 815 to list. maybe a list of working headsets might help if anyone has one.

my Jabra T3030 doesn't work either. It works great with A2DP and it even rings when i get a call. but it hangs the device if i try to answer and there's no audio in calls.
I tried every build possible

I cannot get my Bluetooth wireless headset to work also ,it works on phone calls but on media ,no sound is transferred ,Ian using Mattc 1.6b with sonyericsson headset ,that works more than perfect on windows
Sent from my HTC HD2 using XDA App

saabguy123 said:
I've been using Androind on my HTD for +/- the past month or so, and have yet to have stable bluetooth operation through my Pioneer AVH-3200BT which is enabled for BT phone calls (NOT A2DP). I've been through several builds, and currently am using shu8i's latest shubCRAFT 1.4d (23.08.2010 build). I'm got HPSL3 and Radio 2.12.
I get a lot of forced close app errors with trying to establish BT connection. Sometimes I get further, like the Pioneer can usually pick up my contact list after a few tries... But the worst happens when I try to make a phone call. The system hangs, the sound goes dead, the Pioneer cancels the call, and the HTC HD2 usually crashes back to the home screen. From then, I usually dont have any sound for anything until I reboot the HD2.
In WM6.5 Bluetooth works fine with the Pioneer.
Can anyone help me out with this? I'd be willing to pull some logs / demos / or get more vital information if I knew where to look. I'll be the geinea pig!
Thanks in advance
Click to expand...
Click to collapse
I got similar problem with my Motorola Headset too, it just keep hanging with the dialer, without bluetooth one, the dialer works flawlessly. Mine is Shubcraft

I think I figured it out... I set the pioneer to accept connections with pin 1234 instead of 0000 and it seems to be working alright now.
Sent from my HTC HD2 using XDA App

precsmo said:
I got similar problem with my Motorola Headset too, it just keep hanging with the dialer, without bluetooth one, the dialer works flawlessly. Mine is Shubcraft
Click to expand...
Click to collapse
I'm also having troubles with my Sony Ericsson MW600. I did get it going with I think ShubCraft 1.4b but now on 1.5 it won't have it...
It pairs fine, works fine with Media - AVRCP controls working, etc.
But the phone app just doesn't like it. I've tried to switch BT on and off whilst in call and most of the time get a force close on the phone app.
My libbluetooth.so files are dated 04/08/2010. Does anyone have later dated .so files I can try? Or earlier ones for that matter!?
Thanks all.

wheeliemonster said:
My libbluetooth.so files are dated 04/08/2010. Does anyone have later dated .so files I can try? Or earlier ones for that matter!?
Thanks all.
Click to expand...
Click to collapse
I've changed libbluetooth.so for this one:
http://code.google.com/p/androidobex/downloads/detail?name=libbluetooth.so
it work's but the hd2 ask for the bluetooth pass every time that connects.

magnus48 said:
I've changed libbluetooth.so for this one:
http://code.google.com/p/androidobex/downloads/detail?name=libbluetooth.so
it work's but the hd2 ask for the bluetooth pass every time that connects.
Click to expand...
Click to collapse
I can't even get the bluetooth radio to turn on using this file...
Not having bluetooth headset is the most frustrating thing. Well its a close second to nearly every android build claiming to have bt working in the OP but it doesn't work!!

bhilgeman said:
I can't even get the bluetooth radio to turn on using this file...
Not having bluetooth headset is the most frustrating thing. Well its a close second to nearly every android build claiming to have bt working in the OP but it doesn't work!!
Click to expand...
Click to collapse
I've tried changing the libbluetooth, libbluetoothd and libbluedroid files time and again with Shubi's build and nothing works.
I had some success today though. I'm currently using Shubi's build but with the michyprima r10 kernel.
I was trying a different kernel earlier - the huanyu OC kernel from here:
http://forum.xda-developers.com/showthread.php?t=777921
This got my BT headset working for calls and A2CP/AVRCP...
PLEASE NOTE: This kernel is in beta still, read the thread!
Unfortunately, it proved to be a little unstable for me, so I've had to go back to michyprima's kernel.
But it does seem that the problem lies in the kernel, rather than the bluetooth libraries.

bhilgeman said:
I can't even get the bluetooth radio to turn on using this file...
Not having bluetooth headset is the most frustrating thing. Well its a close second to nearly every android build claiming to have bt working in the OP but it doesn't work!!
Click to expand...
Click to collapse
A reboot is required after overwriting libbluetooth.so file
With some old android distributions I cant turno on the bluetooth radio, but it was a kernel matter. Maybe updating the kernel solves the problem.
Now I use FroyoStonev2 with this [kernel][.32.9](BFS+BFQ+AXI+OC+UV) build on 09.09.2010(version 0.2)
But every time that reboot the hd2 need to pair with the freehands.
Every time that reconnect it needs to reenter the code.

My Bluetooth connection is REALLY BAD

I have searched the Desire hd section for any Bluetooth problems, but seems that im the only one with a problem????!!!
My Bluetooth conectivty SUCKS with any headsets!
i have tried 4 diffrent headsets! and all "god" ones.
But i get the same result, as soon as i move i get lots of bad sound (Donw know how to explane, but like a Tv sound without a signal)
and i have to have the phone at a maximum of 5-10 cm so i can get a "good" listning sound.
The person who talkes with me have no problems.
I tested with 3 diffrent Nokia BT
one of them is bh-606
Jabra Bt as well.
I have the latest firmware. But lots of apps in my phone? can that cause a problem?

Try settings/energy saving function/ deactivate bluetooth. (Turn off)
Sent from my Desire HD using both my thumbs

Hmm Thanks but that only says that it will close Bt connection while there are no calls active?!
I can alsaw add that my Wifi Connection sucks aswell. tried it with 3 routers. and if im not in the same room so the connection is not even detected! But if im in the same room i came upp to 18 mb download with a speed test app. So the Range seems to be a problem both for the BT and Wifi.

Update your radio. Find how to by reaching.
Sent from my Desire HD using XDA App

1,72.405.3
isnt that the latest radio?
The settings/energy saving function/ deactivate bluetooth. (Turn off)
Didnt help
And i really dont wanna make a hard reset and reinstall all my apps and settings! and i dont have root so i can make a backup of all that.

1,72.405.3 is rom, not radio
look in the development forums, in one of the stickys there are the radios listed
but u'll need root + other things to flash a new radio

Blezz said:
1,72.405.3 is rom, not radio
look in the development forums, in one of the stickys there are the radios listed
but u'll need root + other things to flash a new radio
Click to expand...
Click to collapse
Thanks for the advice, but cant have root with the new firmware!
Have even tested more on the BT part and discovered that whenever im nearby any Electrical eqwipment like Pc or Tv it gets even worst!
At best its when i have it in 10 cm distance and with no electrical things around! and not moving at all. then its Near Okej.

3kgt said:
1,72.405.3
isnt that the latest radio?
The settings/energy saving function/ deactivate bluetooth. (Turn off)
Didnt help
And i really dont wanna make a hard reset and reinstall all my apps and settings! and i dont have root so i can make a backup of all that.
Click to expand...
Click to collapse
Hmm.. download the "app 2 sd" app to save your apps on sd.
Hmm, wierd problem of yours
Sent from my Desire HD using both my thumbs

Plz Any help here?
Need to use BT units while driving + at work and i cant!
Edit:
i did a little test today with a Stereo Bt unit!
then bt connection works well!
so it seems that the problem is a software issue and its only with mono bt units!!!

Yet a nother sieries of tests!
I have now concloded that its the Mono Bt units i have problems with, and that its a software issue!
I used the BT in my car, and the sound works without any problems..
And i tested with a Nokia Stereo Bt, and same there, even upp to 10 m i have a clear sound..
SO it seems to be only with regular mono Bt units i have this problem!
Any tips?