Help PLEASE Dead Phone - Vibrant General

I have searched and posted this question in some other threads but have not got any answer so hopefully someone outh there can help
""I am in a situation where I rooted my phone but never made a backup or installed clockwork as I did not intend to do any outragous stuff just wanted to remove some bloatware. Now I did a factory reset since I just wanted to clear out all user data. I only removed safe bloatware and the phone ran fine until the reset. Now I only get a force close loop when booting and cannot do anything. I am not able to get into debugging mode to use ADB and the hardware buttons are not working any suggestions on how I can fix this.""

Related

[Q] How to reload stock rom?

Hey guys, after trying to root my device and trying to mess with some settings I decided that I would prefer to go back to the original state. Will factory reset completely get rid of everything I've done? I used the Super One Click method. I want to completely get rid of EVERYTHING i've done and just start with a fresh device again. I tried factory reset, but I still saw Super User. How can I get rid of this? When I did unroot on Super One Click, last time it just stopped at removing the apk. So I just rerooted.
The original reason why I wanted to do this was because I was getting an error message upon installing apps (18), and then I tried to install astro and delete a file (asec) which didn't let me. So I rerooted, and it still wouldn't let me. I'm so confused! LOL!
I'm not sure what to do. Any suggestions? I'm all ears!
Thanks.
Power off, hold the volume up and down and power on. you will get a menu and select fatoy reset

[Q] i need help, bricked my SM-g870a

Disclaimer: this has nothing to do with the quality of the program i was working with and everything to do with MY lack of knowledge of android systems and what I am doing.
purchesed: 8/23.2014
my att gs870a
rooted: towelroot
xposed module: donkeyguard
the last few things that i had done was to install ABP for android and then downloaded donkeyguard. i checked the box in modules for Xposed installer and it required a reboot. i rebooted device and it starts booting up and gets to att screen and stops.
boot loader is set to freeze most of the automatic updates including KNOX
i have root cloaker in place
Xposed privacy guard in place
i can reboot into manual holding up arrow, home and power keys
from there i dont know what to select: restore factory defaults?
please help
i can try to provide any extra information that you may require and i have more rooted updates on device. please take pity on a NOOB. i dont claim anything other than sometimes a little knowledge is dangerous.
thanks
patrrick
sorry that this is my first post. i have learned alot form this forum. this is my first android device. i had been on using BB 9930 up to now.
hi again
here is what i was able to work thru. hard boot holding vol/home/power into manual. at this point i was able to get kies3 to read device. reset to factory options and reinstalled last backup. phone is back up and running/rooted and reloaded with the exception of a couple of the last programs i had installed. now for the question:
it seems to be running slower than it was before. used TB to refreeze a number of apps and i was hoping it would show me if there were dup's. i am thinking this could be causing the slower operation. have used Antutu to check it against prior to brick. any thoughts on what might be causing it?
thanks in advance
patrick
pjciii said:
hi again
here is what i was able to work thru. hard boot holding vol/home/power into manual. at this point i was able to get kies3 to read device. reset to factory options and reinstalled last backup. phone is back up and running/rooted and reloaded with the exception of a couple of the last programs i had installed. now for the question:
it seems to be running slower than it was before. used TB to refreeze a number of apps and i was hoping it would show me if there were dup's. i am thinking this could be causing the slower operation. have used Antutu to check it against prior to brick. any thoughts on what might be causing it?
thanks in advance
patrick
Click to expand...
Click to collapse
Try to factory reset again to eliminate all possible apps that may cause the problem
vndnguyen said:
Try to factory reset again to eliminate all possible apps that may cause the problem
Click to expand...
Click to collapse
thank you i will after i get home from work.
patrick
ok, back
vndn thanks for the suggestion. what i did was take a close look at all the settings after the reinstall and what i found was Wifi had been switched to manual in advanced settings and was causing conflict with the system operation causing the slower operation. seems to be fine now. thanks for the help.
patrick
vndnguyen said:
Try to factory reset again to eliminate all possible apps that may cause the problem
Click to expand...
Click to collapse
My problem is simula to pjciii, after install the donkey guard and phone gets brick but I just only need to reset cache partition and reinstall the xposed, I just simply don't use donkey guard, voila, nothing happened to me again

[Q] Help! Stuck at LG Logo

I believe this is caused by Xposed, here's what happened. I rooted today, went to xposed and it showed that the current version was wrong or wasn't working or something, so I decided to hit uninstall and then reinstall it after boot. Unfortunately, my phone is stuck at the LG logo now. I don't have a custom recovery installed or anything, I read I need to access the disable xposed zip in order to fix this, but I'm not sure how I can since I can't really use my phone. I also want to know if there's any way of doing this without losing my data, I REALLY can't lose all my data over this, didn't backup or anything lately. Thanks!

PLEASE HELP! Substratum messed my galaxy s8 up.

After I applied a skin, it instantly crashed with a message saying "the system ui has stopped".
I can't get in to my phone. Only the always on display is available as of right now.
I have tried ejecting the sim, booting it in to safe mode.
My phone is not rooted and I don't plan on rooting it. I haven't registered bixby so I can't put it in to max power saving mode.
I don't know what adb shell is. Please can anyone help me save my phone? I am so desperate.
PLEASE HELP. MY PHONE IS A BRICK.
Can I save my phone without a factory reset?
I was on Oreo Beta.
Please help. Thank you
once in safe mode, see if you can disable substratum or perform a factory reset.
Ok dont panic i also had trouble after applying substratum, First my phone became very laggy and then apps stopped working with constant crashes. Eventually the phone became unusable. A factory reset solved the problem for me, if you cant get into the phone use samsung smart switch you should be able to reset it from there and try back up your data.
You could also try flashing a rom to see if this would help.
If you can't delete the overlays from safe mode then you'll have to perform a factory reset. The only other way I would assume is unfortunately uninstalling the overlay apks through adb but then you need to know the full name of the apks you want to delete. by using adb you could find the names of all installed apk but then again.. could be a reason to learn to use adb
Thread cleaned No need for rude comments guys Lets keep it on track....

Stuck on 'Phone is starting' after updating to Android 12

Hello!
I tried to update my phone (SM-G975U) via Odin from Android 9 to Android 12, got the firmware from SamFw.com. Everything went fine until the phone rebooted, after unlocking the phone gets stuck on 'phone is starting'. I CAN access the Set Up Menu, Uninstall apps, move some settings here and there, connect to Wifi/Bluetooth, receive calls, install apps using ADB. Also, theres a notification all the time that reads 'Phone restarted Unlock your phone to get app notifications', I'm assuming that the phone thinks it is not unlocked and that's why it doesn't fully boot up.
Some things that I've already tried:
Intalling another Launcher (Pixel Launcher)
Reinstalling the firmware (ver G975USQU6IVC7) / Trying with different CSC with no results
Wiping Cache in Recovery Mode
Deleting/Adding Fingerprints
Changing from Lock Pattern to NIP to Password
I don't really want to do the full wipe, I would like to keep my data or be able to export the photos (Device not Recognized by Smart Switch also)
Is there anything else I can do?, has anyone been through the same issue?
Is your phone rooted?
Vatt`ghern said:
Is your phone rooted?
Click to expand...
Click to collapse
No, it's not rooted
Hi !
@DannOsnaya have you found a solution to the phone problem other than restoring to factory settings?
I have the same problem at the moment, almost identical to what you experienced.
If anyone has some advice on how to fix this problem, please share your advice.
My phone is not rooted.
Racer512 said:
Hi !
@DannOsnaya have you found a solution to the phone problem other than restoring to factory settings?
I have the same problem at the moment, almost identical to what you experienced.
If anyone has some advice on how to fix this problem, please share your advice.
My phone is not rooted.
Click to expand...
Click to collapse
Sadly, I have not
My phone is still like that, I tried updating to the newest security patch but didn't work either, haven't lost hope in avoiding factory reset tho
Hi. Did u find any solution to it. Am facing the same issue. Although I tried to factory reset but doesn't work.
DannOsnaya said:
Sadly, I have not
My phone is still like that, I tried updating to the newest security patch but didn't work either, haven't lost hope in avoiding factory reset tho
Click to expand...
Click to collapse
Any way to factory reset. I tried every possible way following YouTube but nothing works. It's just stuck. I've a backup of my data so not worried.
No, I still have the same issue.
Have you tried to install a launcher?
DannOsnaya said:
No, I still have the same issue.
Have you tried to install a launcher?
Click to expand...
Click to collapse
Nothing works. Now decided to show it to anyone. I guess the mobile shops have an option to erase everything. I don't understand how did it happen because it's usually with my toddler, he might have done something.
DannOsnaya said:
Hello!
I tried to update my phone (SM-G975U) via Odin from Android 9 to Android 12, got the firmware from SamFw.com. Everything went fine until the phone rebooted, after unlocking the phone gets stuck on 'phone is starting'. I CAN access the Set Up Menu, Uninstall apps, move some settings here and there, connect to Wifi/Bluetooth, receive calls, install apps using ADB. Also, theres a notification all the time that reads 'Phone restarted Unlock your phone to get app notifications', I'm assuming that the phone thinks it is not unlocked and that's why it doesn't fully boot up.
Some things that I've already tried:
Intalling another Launcher (Pixel Launcher)
Reinstalling the firmware (ver G975USQU6IVC7) / Trying with different CSC with no results
Wiping Cache in Recovery Mode
Deleting/Adding Fingerprints
Changing from Lock Pattern to NIP to Password
I don't really want to do the full wipe, I would like to keep my data or be able to export the photos (Device not Recognized by Smart Switch also)
Is there anything else I can do?, has anyone been through the same issue?
Click to expand...
Click to collapse
I followed a video and wiped out. Finally successful. I wasn't worried about data as Google has a backup.
I followed this method and finally it's factory reset.

Categories

Resources